Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC GALI BAWARI WALI NOHARIA BAZAAR SIRSA 125055 HARYANA | SIRSA | HARYANA | 125055 | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.6 L+₹71,104.50 (2.38%)Rejected-Finance CC III 28A JANTA BHAWAN ROAD SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹30.6 L+₹71,686.24 (2.40%)Rejected-Finance NOT FOUND | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹31.9 L+₹2.0 L (6.71%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹34.4 L+₹4.5 L (15.0%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹43.7 L
EMD Value
₹87,340
Closing Date
30 Mar 2024, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SIRSA
MILITARY ENGINEER SERVICES, GARRISON ENGINEER (AF) SIRSA
GE/SRA/T-60/2023-24
2024_MES_644152_2
GE/SRA/T-60/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) SIRSA
PLEASE REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) SIRSA
₹87,340
Yes
8 Apr 2024
18 Mar 2024
1 Apr 2024
18 Mar 2024
30 Mar 2024
18 Mar 2024
Amount
SCHEDULE 'A' PART-I (B/R WORKS) M&L for excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm for soft/loose soil complete all as specified and directed.
M&L for Surface dressing n exc 15 cm deep, in soft/loose soil complete all as specified and directed.
Excavation in trenches not exc 1.5 metre width and not exceeding 1.5 metre in depth in soft/loose soil and getting complete all as specified and as directed.
Returning, filling in including spreading levelling watering and well ramming in layers n.exc 25 thick for soft/loose soil complete all as specified and as directed.
Removal of excavated material to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.
M&L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.
M&L for soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber with spread thickness 100 mm complete all as specified and directed. (NOTE: Quoted rate shall be deemed to include for rolling of surfaces with 8-12 tonne power roller. Contractor shall arrange roller under his own arrangement)
M&L for Cement Concrete 1:4:8 Type D2 (40mm Graded Stone Aggregate), 75 mm thick, as in Sub-base of floor, paving etc complete all as specified and as directed.
M&L Cement Concrete 1:2:4, Type B2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L for damp proof course to horizontal or vertical surfaces 40 mm thick including necessary formwork in cement concrete 1:2:4, type B0 using 12.5 mm graded aggregates complete all as specified and directed.
M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
M&L for RCC 1:1½2:3 Type A1, using 20mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Item.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.
-ditto- but 6 to 8 mm dia TMT bars
M&L for Cement Concrete 1:2:4 Type B1 (20mm Graded Stone Aggregate), 100 mm thick, as in path, hard standing in alternate panels/bays, finishing concrete surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block etc including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L for sand filling under floors or in hardstanding etc, spread in required thickness incl consolidation complete all as specified and directed.
M&L for laying pre-polished 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Sand cushioning shall be measured and paid separately)
S&F in position, at or near ground level, factory made precast cement concrete kerb stone blocks, in M-25 grade cement concrete, fixed to the required line, level and curvature, jointed in cement mortar 1:3, including making joints with or without grooves (thickness of joints, except at sharp curves shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and directed.
S&F Coloured PVC Board Scratch and strain free (weight not less 9 Kg/Sqm or having density of 600 KG per Cum) in Door, Shelves for Kitchen Cabinets, one side plain & other side laminated (Wood Grain Finish) , 18/19mm thick as required, jointed to form cabinet by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & fixing of Stainless steel L shaped hinges suitable for 18/19 mm PVC Board (minimum of 02 Nos for Each leaf) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter) and Door catcher (01 no for each leaf), complete all as specified and as directed. NOTE: Quoted unit Rates are inclusive of PVC board, handles, hinges, screws, Door catcher and adhesive etc.
S&F stainless steel Cup and Saucer basket of size (370x485x100mm) and fitted to a telescopic drawer channel and PVC Ply board with smooth movement complete all as specified and directed. Make : Godrej (Product Code : 6129) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
S&F stainless steel Perforated Cutlery basket of size(370x485x100mm) and fitted to a telescopic drawer channel and PVC Ply board with smooth movement, complete all as specified and as directed. Make : Godrej (Product Code : 6132) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
S&F 500 mm telescopic drawer channel, fitted to PVC ply board and SS basket for smooth movement complete all as specified and directed. Make : Godrej (Product Code : 6902) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
M&L for dismantling floor tiles along with screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Vitrified Ceramic Tiles, 9-10mm thick (Square/ Rectangular), coloured, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for vitrified tiles in skirting, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L for dismantling floor tiles along with screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Non-skid/matt finish Ceramic tiles, coloured, 7 to 8 mm thick (Square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for non-skid/matt finish ceramic tiles in skirting, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
S&F Non-skid/matt finish Ceramic tiles, coloured, 7 to 8 mm thick (Square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for Coloured/Printed Glazed Ceramic Tiles, 450x300x7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
S&F Solid PVC Door Frame of size 50x47 mm made out of 5.0mm having Wood Grain Printed PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening, complete all as specified and as directed.
M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/fixing with and including Stainless Steel Hinges, complete all as specified and as directed. NOTE : Stainless Steel Hinges will be Measured and Paid under appropriate Item.
S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.
S&F Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.
S&F Aluminium Handle 125mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed. (NOTE: Cost of cutting holes in brick walls and making good to dismantled portion with cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregates) and finishing with 10 mm thick cement mortar 1:4 shall be deemed to be included in the quoted rates.
S&F Sheet Glass 4.0mm thick, frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
M&L for rendering 15 mm thick to fair faces of brick work / concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (up to any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separately as "Supply only".
M&L for rendering 5 mm thick to fair faces of concrete surface, in ceilings, in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed.
Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
M&L for preparation of new plastered surfaces of walls and applying Two Coats of Acrylic Distemper (as approved) over a coat of primer, with rollers complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.
M&L for preparing New Plastered Surfaces of Walls by applying a Coat of Chalk Whiting (as Preparatory Treatment) and applying Two Coats of Weather Proof Exterior Emulsion Paint over a coat of cement primer with approved Tint as per manufacturer's instructions, complete all as specified and as directed.
M&L for Cement Concrete 1:2:4 Type B0 (12.5mm Graded Stone Aggregate), 25 mm thick in Sub-base of floor etc complete all as specified and as directed.
M&L for Cement Concrete 1:3:6 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide up to total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and as directed.
Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation complete as all specified and as directed.
Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation complete as all specified and as directed.
S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body , screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed.
S&F Pillar Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type screwed down high pressure, with long screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed.
S&F Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe , complete all as specified and as directed.
S&F Gun Metal Globe/Gate Valve 15mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe, complete all as specified and as directed.
S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe, complete all as specified and as directed.
S&F Rotational Moulded Polyethylene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and as directed.
S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.
S&F PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC, complete all as specified and as directed.
S&F Tubular towel rail, 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed.
S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including provision Concrete Bedding and Making Good to disturbed surfaces complete all as specified and directed.
S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC flush Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in CM 1:3, complete all as specified and as directed.
S&F in repairs Vitreous China Wash Hand Basin 450x300mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 complete all as specified and as directed.
S&F Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror, complete all as specified and as directed.
S&F CP Grating Round 100mm dia jointing with Solvent Cement complete all as specified and as directed.
S&F PVC (SWR) 'P' Trap, 110 mm OD, fixed wit solvent complete all as specified and as directed.
S&F PVC Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate), complete all as specified and as directed.
S&F PVC (SWR) 75mm OD, Soil, Waste and Ventilating Pipe, single socket, in any length with PVC Joints, with or without Ears, laid in trenches, Floors etc complete all as specified and as directed.
S&F in repair PVC (SWR) 110mm OD, Soil, Waste and Ventilating Pipe, single socket, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.
S&F 110mm OD PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and as directed.
S&F PVC (SWR) Bend 75mm OD, any radius with Access Door, etc. jointing with Solvent Cement , complete all as specified and as directed.
S&F PVC (SWR) Bend 110mm OD, any radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed.
S&F 75 mm OD PVC (SWR) vent cowl complete all as specified and as directed.
M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) as in Concrete Bed to Drain Pipes of 150mm bore (dia), including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
S&F Salt-Glazed stoneware drain pipe 150mm bore (dia), grade ‘A’, laid in trenches, jointed with cement mortar 1:1 and tested, complete all as specified & directed.
M&L Cutting into existing Manholes for Connecting New Drain Pipes of 150mm (Internal dia), Making Good to Pipe and rendering, cutting out existing Benching for and forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.
Taking down existing ventilator, any type, not exc 1.5 sqm each and making good disturbed surfaces complete all as specified and directed. (NOTE: Quoted rate shall be deemed to be inclusive of making good of the jambs with cement mortar 1:6)
S&F powder coated anodized aluminium ventilators, fixed type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, channels, screws etc complete all as specified and directed. (NOTES :- 1) Aluminium ventilator shall be fabricated in a design to allow for fixing of 01 No 250 mm PVC ventilating fan. Quoted rate shall be deemed to include for suitable aluminium mid sections for fabricating the ventilator as per required design. Fan shall be measured separately. 2) Glass, louvers and stainless steel mosquito proofing shall be measured separately. 3) After fixing of aluminium ventilator, exposed faces of jambs shall be finished with wall putty to achieve a smooth surface.
S&F 4 mm thick glass blade louvers with suitable louver frame and other accessories for fixing on aluminium ventilators complete all as specified and directed. (NOTE : No of glass blades shall be as directed by Engineer-in-Charge. Surface area of opening shall be measured for payment purpose)
SCHEDULE 'A' PART-II (E/M WORKS) M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn through and including Rigid Non-metallic PVC Conduit 20mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing Sunk Mild Steel Pressed Terminal Box (1.2 mm thick) of suitable size (as required) duly painted with Red Oxide Metal Primer and cover plate and frame for mounting MODULAR TYPE Switches, Sockets, Fan Regulators, etc. and Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/FAN POINT/ BELL POINT CONTROLLED BY ONE 1-WAY SWITCH 6 AMP incl finishing good disturbed surfaces complete all as specified and as directed.
All as per item No 83 here-in-before but with 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Cable, drawn through and including Rigid Non-metallic PVC Conduit 20mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing Sunk Mild Steel Pressed Terminal Box (1.2 mm thick) of suitable size duly painted with Red Oxide Metal Primer with cover plate and frame (as per Site requirement) for mounting MODULAR TYPE Switches, Sockets, Fan Regulators, etc. Earth Continuity Cable connected to Common Earth dolly for ONE 6 PIN SOCKET 16 AMP ON INDEPENDENT BOARD, incl finishing good disturbed surfaces complete all as specified and as directed.
NOTES FOR ITEM NO 83 & 84 :- (1) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (2) Quoted rate shall be deemed to be inclusive of the cost of sheet metal terminal box and Modular cover plate with frame as per required size/no. of modules. Quoted rate of point wiring shall be deemed to include for the cost of pressed steel terminal box, modular cover plate and frame.
NOTES FOR ITEM NO 83 & 84 :- (3) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage. (4) On completion of the wiring work, the contractor shall fill and finish the chases with cement mortar 1:6, apply 2 mm thick wall putty for smooth finish and finish with two coats of acrylic distemper as per existing shade over the conduit layout. Rate quoted by the contractor shall be deemed to include for the above aspect and no claim shall be entertained at a later stage.
S&F Modular Switch 1 way 6 A, 1 module complete all as specified and as directed.
S&F Modular Switch 1 way 16 A, 1 module complete all as specified and as directed.
S&F Modular Socket 6 A/16 A, 2/3 pin combined 2 module complete all as specified and as directed.
S&F new Ceiling rose, surface type, three terminals complete all as specified and directed
M&L for making holes in walls for installation of exhaust fans and finishing with cement plaster 1:4 and applying two coats of acrylic distemper on plastered surfaces complete all as specified and directed
S&F exhaust fan 300 mm sweep, 1300 RPM, heavy duty, AC Single Phase 230/240 volts, metal body, with louvers complete with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of size 1.5 sqmm (nominal area) from ceiling rose to fan complete all as spcified and directed. (MAKE : HAVELLS, Model: Ventil Air DS / CROMPTON, Model: Transair / USHA, Model: Aero Clean Plus or equivalent model in BAJAJ / ALMONARD / ORIENT) NOTE :- Old unsv fan, if existing shall be taken down and deposited by contractor in MES store. Quoted rate shall be deemed to be inclusive of the aspect.
S&F PVC ventilating fan 250 mm sweep, 1200 RPM, AC Single Phase, 230/240 volts complete with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of size 1.5 sqmm (nominal area) from ceiling rose to fan complete all as specified and directed. NOTE :- Old unsv fan, if existing shall be taken down and deposited by contractor in MES store. Quoted rate shall be deemed to be inclusive of the aspect. (MAKE: HAVELLS, MODEL : VENTILAIR DX / ALMONARD, MODEL: ECO-VENT / USHA, MODEL: CRISP-AIR / BAJAJ, MODEL : MAXIMA DXL 250)
M/s Satguru Traders
shiv shanker enterprises
Ajay Enterprises
M/s Har Nandi Construction Company
STAR CONSTRUCTIONS
M/S GOYAL CONSTRUCTIONS
AGGARWAL CONSTRUCTION CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .