Annual repair, operation & maintenance of Storm Drainage Pumping Station 10(1) Mithapur DPS, 10(2) Gardanibagh DPS, 10(3) Babubazar DPS, 10(4) Beur Lifting, 10(5) Riding Road, 10(6) Police Colony under Nutan Anchal, Patna West(Mech.) Works Division, Rajapur pool, BUIDCo, Patna for the years as session 2026-27

NIT-03/Mech/SB/2026-27 Gr-10

Name of Work:-Annual repair, operation & maintenance of Storm Drainage Pumping Station 10( I) Mithapur 10 (2) Gardanibagh, 10 (3) Babu bazar 10 (4) Beur lifting 10 (5) Riding Road and 10 (6) Police colony DPS under Nutan Anchal, Patna West (Mecanical) Works Division, BUIDCo, Patna for the years as session 2026-27 .

Estimated Cost (Rs.) Rs. 2,61,67,384.00

Earnest Money (Rs.) Rs. 5,23,400.00

Time of initial inspection & testing of thorough repaired all machineries. 15th May 2026

Cost of BOQ (Rs.) Rs. 17,700.00

To be filled by the Bidder

1 Name of the Contractor/Bidder

2 Address of the Contractor/Bidder

Gr10 (1) Name of Work:- Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant MITHAPUR DPS under Mech. works division Buidco, patna for monsoon' 2026 for the year 2026-27 (1 st April 2026 to 31 March 2027 ).

Sl.No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

1 Pump Set-125 HP CF No-1,2 Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 2 job 0.00 0.00

2 Repairing of FASD starter cum Panel Board for 125 HP C/F motor pump (Asper Annexure-01A) 2 job 0.00 0.00

3 Pump Set-170 HP C F., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 02) 1 job 0.00 0.00

4 Pump Set-147 HP Sub., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 03) 1 job 0.00 0.00

5 Pump Set-50 HP Sub., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 04) 1 job 0.00 0.00

6 Repairing of FASD starter cum Panel Board for 170 HP C/F motor pump (Asper Annexure-02A) 1 job 0.00 0.00

7 Repairing of FASD starter cum Panel Board for 147 SUB motor pump (As per Annexure-03A) 1 job 0.00 0.00

8 Repairing of FASD starter cum Panel Board for 50 HP SUB motor pump (As per Annexure-04A) 1 job 0.00 0.00

9 Complete repairing and servicing of Diesel Engine- 156 HP pump set (As Per Annexure -05). 1 Job 0.00 0.00

10 Complete repairing and overhauling of Diesel Engine- 156 HP pump set(As Per Annexure -06). 1 Job 0.00 0.00

11 Supply & fitting of 120 mm² 3 core PVC sheathered armoured copper cable ,starter to motor for 02 Nos. pump of 125 HP. 35 m 0.00

12 Existing Outdoor Transformer400 KVA with AB Switches (As per Annexure- (7) 1 job 0.00 0.00

13 Existing Outdoor Transformer 315 KVA with AB Switches (As per Annexure- 08 ) 2 job 0.00 0.00

14 Reparing and servicing Vaccum Pump for CF , 3 phase, 440volts, 50hz (As per Annexure - 9) 5 job 0.00 0.00

15 Cost for providing all labours, tools & materials for complete , installation, testing and commissioning of non-return valve of size 450 mm dia for 125 HP & 156 HP (D) CF pump confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers, gland packing etc.as required complete work as per direction of E/I 3 Job 0.00

16 Cost for providing all labours, tools & materials for complete , installation, testing and commissioning of non-return valve of size 500 mm dia for 170 HP CF pump confirming to IS:5312 complete with rubber gasket,GI bolts, nuts, washers etc.as required complete work as per direction of E/I. 1 Job 0.00

17 Reparing and servicing 05 Ton Manually Chain pulley block Over head crane mounted on DPS 1 job 0.00

18 Providing & installation of New water level Gauge as per direction of E/I. 1 job 0.00

19 Cleaning & Desilting of Existing sump at DPS by removing mud approx 1.2 m in depth and disposal of the same to away from the DPS (As per Annexure- 10) 1 job 0.00 0.00

20 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size at discharge chamber complete work as per direction of E/I. (rate vide BCD SOR-5.2.3) ( 02 Nos x 1.6 x .350 x .300 + 02 Nos. x 2.0 x .350 x .300 = 0.76m³ ) 0.76 cum 0.00

21 Provision for loading of old, unserviceable, rested pump and its allied parts from DPS to unloading to specificated place as per direction of E/I 1 job 0.00

22 Spray painting over Double coat of paint with red oxide primer of all Existing MS Structure & all Electromechanical equipments by removing old paints. 1 Job 0.00

23 Deployment of 02 nos.x 3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June to 15th Oct. 2026 and 1 no. x 3 shift from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (1506 shift) 1506 Shift 0.00

24 Dployment of Highly Skilled Pump operators 02 nos.x 03 shift per day from 1st June 2026 to 15th Oct. 2026 and 1 no. x 3 shift from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (1506 shift) 1506 Shift 0.00

25 Complete the below Mention work/ Services as per instruction of E/I:-

A. Writing the name details of officers & Pump operator, Sweeper on the wall with paint. 1 job 0.00

B. Providing Log book & other Required registers/Misc. 1 set 0.00

C. Providing & Installation of Sufficient Qty. Of Fire Extinguisher as per Requirement. 1 set 0.00

D. Providing & availablity of 24 hrsx365 days in sufficient Qty, required Safety materials required as per Instruction of E/I. 1 job 0.00

E. Supply & fitting of 1000 Ltr. polyethylene water storage tank, with laying PVC pipe to each compresor of pump with allied parts for circulating sufficent water supply to pump compresor as per direction of E/I. 1 job 0.00

26 Cost for Complete Repairing,Servicing of Drinking water tube well cum motor & its Pipe line goes to overhead tank & coming to each Pump & Cleaning of over head Tank periodically & all associated works as per direction of Engineer-In-Charge. 1 job 0.00

27 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at storm drainage pumping plant Mithapur DPS. The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Batteries of Diesel engine, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 job (lumpsum) 0.00

Total Rs. :- 0.00

(1) Name of work - Estimate for repairing and servicing of 125HP CF pump

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 125 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 125 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting of bearing of appropriate size of SKF Make, if required including all labour tools and tackles 2 nos. 0.00

5 Cost for bearing greasing, taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

6 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

9 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size- 95mm IDx119 ODx200mm length 1 no. 0.00

10 Cost for supply and fitting of S-cylindrical Roller bearing no. equivalent for 125 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

11 Cost for supply and fitting of Spherical Roller bearing no. equivalent for125 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

12 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

13 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00

14 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

17 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

18 providing all labours, tools, tackles for installation of 125HP C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 4 Kg 0.00

20 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackle TVS make. 10 nos 0.00

21 Deduct : Cost of Scrap materials of bronze 5 Kg 0.00

Name of work - Repairing of 125 HP FASD air break Starter cum control panel.

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 125 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting, contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor MNX 140 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (84.6 - 135) Amp 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

MCCB 250 A 36KA 1 no. 0.00

Multifunction LED meter CI 0.5s 1 no. 0.00

Selector switch 16 Amp 2 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Total Cost - 0.00

(1) Name of work - Estimate for repairing and servicing of 170 HP CF pump and motor

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 170 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 170 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing of appropriate size of SKF Make, if required including all labour tools and tackles 2 nos. 0.00

5 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

6 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

9 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 1 no. 0.00

70 mm ID x 90 mm OD x 150 mm Length

10 Cost for supply and fitting of S-cylindrical Roller bearing no. equivalent for 170 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

11 Cost for supply and fitting of Spherical Roller bearing no.equivalent for 170 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

12 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

13 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

14 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

17 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

18 providing all labours, tools, tackles for installation of 170 HP C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles 6 Kg 0.00

20 Cost for supplying, making and fitting SS bolt for coupling as per size 4 nos 0.00

21 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

Name of work - Repairing of 170HP FASD air break Starter cum control panel for operation of 170 HP motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 170 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting, contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor MNX 140 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (84.6 - 135) Amp 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

MCCB 250 A 36KA 1 no. 0.00

Multifunction LED meter CI 0.5s 1 no. 0.00

Selector switch 16 Amp 2 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Total Cost - 0.00

Name of work - Repairing of 147 HP sub. Motor

sl. No. Particulars Qty unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 147 HP submersible pump set and taking out 60 sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00

2 Cost for opening and dismentling of 147 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00

3 cost for supplying and fitting double row angular contact bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

4 cost for supplying and fitting deep grooved single row bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00

9 cost for supplying following :-

mobil 10 ltr 0.00

servo bearing grease 1.5 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

11 Cost for assembly of all parts of 147 hp submersible pump at workshop including all labour tool and tackles. 1 Job 0.00

12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00

Name of work - Repairing of 147HP Starter cum control panel for operation of 147 HP motor.

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 147 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete. 1 job 0.00

Selector switch 16 Amp 1 nos. 0.00

Bus-bar 400mm x 5mm thick 3 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Three pole MCCB 150 A 1 no. 0.00

Total Cost - 0.00

(1) Name of work - Estimate for repairing and servicing of 50 HP sub pump and motor

sl. No. Particulars Qty unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 50 HP submersible pump set and taking out 50 sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00

2 Cost for opening and dismentling of 50 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00

3 cost for supplying and fitting double row angular contact bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

4 cost for supplying and fitting deep grooved single row bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00

9 cost for supplying following :-

mobil 10 ltr 0.00

servo bearing grease 1.5 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

11 Cost for assembly of all parts of 50 hp submersible pump at workshop including all labour tool and tackles. 1 Job 0.00

12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00

Name of work - Repairing of 75 HP Starter cum control panel for operation of 50 HP Submersible motor.

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 50 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete. 1 job 0.00

Selector switch 16 Amp 1 nos. 0.00

Bus-bar 400mm x 5mm thick 2 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Three pole MCCB 100 A 1 no. 0.00

Total Cost - 0.00

Name of work - Estimate for Repairing & servicing of 156HP diesel engine and its accessories of storm drainage pumping plant Pahari Old before monsoon, 2023 for the year 2023-24

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 156 HP diesel engine of Greaves make by checking of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 P/Job 0.00

2 Cost for supplying and fitting following with 18% GST, 10% CP & 1% labour cess :-

(i) Air filter 1 Each 0.00

(ii) Diesel filter set 1 P/Set 0.00

(iii) Lubcicating oil filter 2 Each 0.00

(iv) Set of Hoses 1 P/set 0.00

(v) Fuel Flexible pipe 1 P/Set 0.00

(VI)Fuse 24V assly 1 P/set 0.00

(vii) Gear oil for gear box 20 Ltr container 1 P/Cane 0.00

(viii) Coolant 5 ltr cane 1 P/Cane 0.00

(ix) V Belt 3 Each 0.00

(x) Relay in electrical power 2 Each 0.00

(xi) Solenoid 24v 1 Each 0.00

(xii) Head Gasket 1 Each 0.00

(xiii) Set of joint 1 Each 0.00

(xiv) Set of sealing rings 1 Each 0.00

(xv) Set of Hose clip 1 Each 0.00

(xvi) Magnetic pick up 1 Each 0.00

(xvii) Battery Terminal 4 Each 0.00

3 Cost repairing of electrical panel of diesel engine by replacing all burnt and damaged electrical wires and fuses and checking the electrical panel including the cost of labour and electricians. With GST, CP,& Labour cess 1 P/job 0.00

4 Cost for repairing of self starter by replacing all carbon brush, GM bush, bearings, solenoid etc. by experienced mechanic in workshop including the cost of materials.With GST, CP,& Labour cess 1 P/job 0.00

5 Cost for repairing of alternator by dismantaling, petrol washing the entire components, changing of all damaged spares, carbon brushes, bearing and cooling fan etc. as required during repairing.With GST, CP,& Labour cess 1 P/Job 0.00

6 Cost for repairing of rediator by checking the leakages from copper tubes, repairing & soldering by gas welding machine, changing the rotten out copper tubes with providing copper fins, repair of the raditor holding frame , rubber pad and painting of the same. 1 P/Job 0.00

7 Cost for repairing the leakages in exhaust system by dismantling the exhaust manifolds and providing the gasket set and bolts and testing on load. 1 P/Job 0.00

8 Cost for dismantaling the power btakew off system, providing and fitting of cluch set with pressure plate and testing on load at site. 1 P/Job 0.00

(1) Name of work - Estimate for repairing and overhauling of 156 HP CF pump

Sl. Particulars Unit Qty Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 156 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing and from foundation base. p/job 1 0.00

2 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. p/job 1 0.00

3 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. p/job 1 0.00

4 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. each 1 0.00

100 mm ID x 122 mm OD x 200 mm length

5 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF 3322 of equivalent for 105 HP Electric pump with GST,CP & labour cess etc each 2 0.00

6 Cost for supply and fitting of Spherical Roller bearing no. SKF 3322 of equivalent for 105 HP Electric pump with GST,CP & labour cess etc each 1 0.00

7 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. p/job 1 0.00

8 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. p/set 1 0.00

9 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles p/job 1 0.00

10 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. p/set 1 0.00

11 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. P/job. 1 0.00

12 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. P/job. 1 0.00

13 providing all labours, tools, tackles for installation of 105 HP C/F pump on foundation,refitting nut-bolt & testing on unload at DPS. P/job. 1 0.00

14 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. P/Kg 10 0.00

15 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackle TVS make. each 10 0.00

16 Deduct : Cost of Scrap materials of bronze P/Kg 2 0.00

Name of work - Estimate for repairing of transformer of 400 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 400 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 200 ltrs. 0.00

6 cost for transformer oil filtration 430 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Name of work - Estimate for repairing of transformer of 315 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 315 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 100 ltrs. 0.00

6 cost for transformer oil filtration 200 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Name of work:- Repairing and servicing of 10 HP vaccum pump.

Sl no Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labour, tools and tackles at site for opening electrical connection of 10 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 P/job. 0.00

2 Cost for dismantling of 10 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 P/job. 0.00

3 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 2 P/job. 0.00

4 Cost for repairing GM impeller by brazing the blades of impeller with brass, turning, polishing and facing the blade to bring it to running condition 2 P/job. 0.00

5 Cost for making supplying and fitting GM bush as per sample. 2 Each 0.00

6 Cost for supplying and fitting ball bearing no. 6307 ZNR of SKF. 2 Each 0.00

7 Cost for supplying and fitting oil seal as per sample. 2 Each 0.00

8 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 Each 0.00

9 Cost for repairing of body (brass discs) by facing both the sides. 2 Each 0.00

10 Cost for supplying and fitting split type GM gland flange. 2 Each 0.00

11 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in workshop. 1 Each 0.00

12 Cost for transportation of pump fromKrishnaghat Pump house to work shop and back to pump house. 1 P/job. 0.00

13 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 1 P/job. 0.00

14 Cost for supplying motor pump 3" dia. coupling pulley 2 Each 0.00

15 Cost for making hole as per dia. Of pump & motor shaft and making key way groove in the coupling on lathe machine and fitting & fixing in the pump & motor. 3 P/set 0.00

16 Cost for cutting and removing burnt cable sockets and doing cable socketing of 4 mm² 3 core copper cable of both motor and starter. 10 Each 0.00

17 Deduct : Cost of Scrap materials Gun metal -1 P/Kg 0.00

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Rate Analysis:-

Road Sweeper Cost @ 550/day (For 01 cum)

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, approach chhannel and inlet chamber etc of Mithapur DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site (i) Area of the sump= 16 m x 2.6 m = 41.6 m² , mud height=1.5 m (avg), Total silt =41.6 m² x 1.0 m (avg) = 62.40 m³ P/M³ 62.4 0.00

2 Cost for providing all labours, tools and tackles at site for repairing, removing rust,dust, scale, smokes etc. from old surface and spray painting two or more coats with anticorrosive bituminous paint of approved brand of two MS grating and channel. 1 job 0.00

3 Cost for providing all labours, tools and tackles & A 10HP electric pump set for dewatering the area within band including cost of hire of electric pump set (Vide SOR RCD PM6-1001. base Rate 195/Hr. 30 p/Hr 0.00

Gr10 (2) Name of Work:- Estimate for Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant GARDANIBAG DPS under Mech. works division Buidco, patna for monsoon' 2026 for the year 2026-27 (1 st April 2026 to 31 March 2027 ).

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Pump- 100 HP VT pump set having Q=425 lps, H=10 m and motor running at 440V, 3 Phase, 50Hz (As Per Annexure -01). 2 Job 0.00 0.00

2 FASD Starter of 140 amp for 100 HP VT Pump Sets. (As Per Annexure -01A) 2 Job 0.00 0.00

3 Repairing and servicing of Diesel Engine- 100 HP (As Per Annexure -02). 1 Job 0.00 0.00

4 Repairing and overhauling Diesel Mounted Pump - 100 HP VT having Q= 350 lps, H=6.5 m ( Annexure -03). 1 Job 0.00 0.00

5 Trolley mounted pump and motor - 120 HP having Q=300 lps, H=13 m running at 440v, 50hz & 5 HP vacuum pump (As per Annexure -4 ) 1 Job 0.00 0.00

6 FASD starter of 195 amp for 120 HP CF TM pump (As per Annexure -4A ) 1 Job 0.00 0.00

7 Pump Set-177 HP Sub.,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 05) 1 job 0.00 0.00

8 (a)Outdoor Transformer 315 KVA, AB Switch & DP Structure of 11 KV Electric Sub-station. (As per Annexure - 6) 1 Job 0.00 0.00

(b)Outdoor Transformer 200 KVA, AB Switch & DP Structure of 11 KV Electric Sub-station. (As per Annexure - 7) 2 Job 0.00 0.00

9 Complete Reparing ,Overhauling ,Servicing & Functionlity of 05 Ton Manually Chain pulley block Over head crane mounted on Gardanibagh DPS as Per Direction of E/I. 1 Job 0.00

10 Providing & installation of New water level Gauge as per direction of E/I . 1 Job 0.00

11 Cleaning & Desilting of Existing sump (As Per Annexture -8) 1 Job 0.00 0.00

12 Spray painting over Double coat of paint with red oxide primer of all Existing MS Structure & all Electromechanical equipments by removing old paints as Per Direction Of E/I . 1 Job 0.00

13 Deployment of Road sweepars 1278 Shift 0.00

Deployment of 02 nos.x 3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June to 15th Oct. 2026 and 1 no. x 2 shift from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (1278 shift)

14 Deployment of Highly Skilled Technician cum pump operators 1506 Shift 0.00

Cost for the deployment of Highly Skilled Pump operators 02 nos.x 03 shift per day from 1st June 2026 to 15th Oct. 2026 and 1 no. x 3 shift from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (1506 shift)

15 Complete the below Mention Misc. work as per instruction of E/I :- 1 job 0.00

A. Providing & Installation of name plate of Buidco.

B. Writing the name details of officers & Pump operator, Sweeper on the wall with paint.

C. Providing Log book & other Required registers/Misc.

D. Providing & Installation of Fire Extinguisher.

E. Providing & availablity of 24 hrs x 365 days in sufficient Qty. required Safety materials as per Instruction of E/I.

16 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at GARDANIBAGH, Dhobighat & Rajbhawan DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, transportation and loading, unloading of any equipment/material, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge etc. as per Direction of E/I. 1 job (lumpsum) 0.00

Name Of Work :- Repairing and servicing of 100 HP VT motor and pump

sl.no. Description of work Qty unit Rate In Rs. (To be filled by the Bidder) Amount (Rs.)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 100 HP VT motor and pump and all electrical connection of motor, taking down motor from from its base by top lifting of motor from motor stool and stacking the motor at proper place 1 job 0.00

2 Cost for providing labour, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc. of 100 HP VT pump. 1 job 0.00

3 Cost for transportation of pump accessories and motor from DPS to work shop and workshop to DPS including hydra and transport vehicle etc. with loading and unloading 1 job 0.00

4 Cost for complete opening of 100 HP motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size. 1 job 0.00

5 S/F of DE and NDE SKF 6315 bearings 2 no. 0.00

6 Cost for greasing the bearing of motor and varnishing, heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit. etc. 1 job 0.00

7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. 1 job 0.00

8 Cost for opening and dismentling of bowl assembly of 100 HPVT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. 1 job 0.00

9 Cost for checking pump shaft, head shaft & line shaft on lathe for straightness and strenghtening the same on hydraulic press machine. 3 nos. 0.00

10 Remetaling and rethreading at both ends upto 3" length on top and line shaft. 3 no. 0.00

11 Cost of making, supply and fitting line shaft bronze bush of size 1 nos. 0.00

58mm ID 78mm OD 125mm length

12 Cost for making and supplying stuffing box bronze bush of size 1 nos. 0.00

58mm ID 78mm OD 125mm length

13 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size 2 nos. 0.00

55mm ID 80mm OD 145mm Length

14 Cost of making, supply and fitting bell mouth bronze bush of size 1 nos. 0.00

60mm ID 80mm OD 150mm length

15 Cost for supply and fitting of SS 416 shaft sleeve of size 1 job 0.00

58mm ID 78mm OD 150mm length

17 Cost for repairing of rachet plate by doing CI welding, grinding & finishing and making 12 nos, sharp edge of proper size and sample by grinding machine 1 job 0.00

18 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

19 Cost for supplying and fitting following:-

(i) 'o' rings 3 nos. 0.00

(ii) Stuffing box packing 5 kg 0.00

(iii) Key for shaft sleeve 1 no. 0.00

(iv) Key for pump shaft. 1 no. 0.00

(v) Ratchet pin SS 410 8 no. 0.00

20 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc. in bowl housing in the work shop 1 job 0.00

21 Cos for scraching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black japan paint. 1 job 0.00

22 Cost for supplying and fitting SS bolts & nuts with plane and spring washers of size for discharge header, column pipe & bowl mouth assembly 127 nos. 0.00

23 Cost for supply of TVS make steel bolts with threading on both ends complete with washer and nuts as per size & sample 8 nos. 0.00

24 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) 20 kg 0.00

25 Cost for fitting materials such as cotton waste, grease, gland packing, emery paper, petrol etc required at the time of fitting of pump. 1 job 0.00

26 Cost for fitting of pump accessories and lowering such as ccolumn pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. 1 job 0.00

27 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing on full load. 1 job 0.00

28 Deduct : Cost of scrap materials Bronze 6 kg 0.00

29 Deduct : Cost of scrap materials Stainless steel 5 kg 0.00

Name of work - Repairing of 150 FASD air break Starter & control panel for operation of 100 HP motor

SI.No Particular Qty unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 120 HP fully automatic star - delta air break starter with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 140 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (84.6 - 135) Amp 1 no. 0.00

Push Button 2 no. 0.00

C.T Coil 100/5 3 no. 0.00

C10 MCB 4 no. 0.00

Single phase preventer 1 no. 0.00

Total Cost - 0.00

Name of Work : - Estimate for servicing of 100 HP diesel engine and its accessories

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 100 HP diesel engine of Kirloskar make by checking of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 job. 0.00

2 Cost for supplying and fitting/filling following :-

(i) Air filter 1 Each 0.00

(ii) Diesel filter set 1 P/Set 0.00

(iii) Lubcicating oil filter 2 Each 0.00

(iv) Set of Hoses 1 P/set 0.00

(v) Fuel Flexible pipe 1 P/Set 0.00

(VI)Fuse 24V assly 1 P/set 0.00

(vii) Gear oil for gear box 20 Ltr container 1 P/Cane 0.00

(viii) Coolant 5 ltr cane 1 P/Cane 0.00

(ix) V Belt 3 Each 0.00

(x) Relay in electrical power 2 Each 0.00

(xi) Solenoid 24v 1 Each 0.00

(xii) Head Gasket 1 Each 0.00

(xiii) Set of joint 1 Each 0.00

(xiv) Set of sealing rings 1 Each 0.00

(xv) Set of Hose clip 1 Each 0.00

(xvi) Magnetic pick up 1 Each 0.00

(xvii) Battery Terminal 4 Each 0.00

3 Cost repairing of electrical panel of diesel engine by replacing all burnt and damaged electrical wires and fuses and checking the electrical panel including the cost of labour and electricians. With GST, CP,& Labour cess 1 P/job 0.00

4 Cost for repairing of self starter by replacing all carbon brush, GM bush, bearings, solenoid etc. by experienced mechanic in workshop including the cost of materials.With GST, CP,& Labour cess 1 P/job 0.00

5 Cost for repairing of alternator by dismantaling, petrol washing the entire components, changing of all damaged spares, carbon brushes, bearing and cooling fan etc. as required during repairing.With GST, CP,& Labour cess 1 P/Job 0.00

6 Cost for repairing of rediator by checking the leakages from copper tubes, repairing & soldering by gas welding machine, changing the rotten out copper tubes with providing copper fins, repair of the raditor holding frame , rubber pad and painting of the same. 1 P/Job 0.00

7 Cost for repairing the leakages in exhaust system by dismantling the exhaust manifolds and providing the gasket set and bolts and testing on load. 1 P/Job 0.00

8 Cost for dismantaling the power btakew off system, providing and fitting of cluch set with pressure plate and testing on load at site. 1 P/Job 0.00

Name Of Work :- Repairing and overhauling of 100 HP DE pump

sl.no. Description of work Qty unit Rate In Rs. (To be filled by the Bidder) amount (Rs.)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 100 HP VT pump 1 job 0.00

2 Cost for providing labour, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc. of 100 HP VT pump. 1 job 0.00

3 Cost for transportation of pump accessories and motor from DPS to work shop and workshop to DPS including hydra and transport vehicle etc. with loading and unloading 1 job 0.00

4 Cost for opening and dismentling of bowl assembly of 100 HPVT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. 1 job 0.00

5 Cost for checking pump shaft, head shaft & line shaft on lathe for straightness and strenghtening the same on hydraulic press machine. 3 nos. 0.00

6 Remetaling and rethreading at both ends upto 3" length on top and line shaft. 3 no. 0.00

7 Cost of making, supply and fitting line shaft bronze bush of size 1 nos. 0.00

58mm ID 78mm OD 125mm length

8 Cost for making and supplying stuffing box bronze bush of size 1 nos. 0.00

58mm ID 78mm OD 125mm length

9 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size 2 nos. 0.00

55mm ID 80mm OD 145mm Length

10 Cost of making, supply and fitting bell mouth bronze bush of size 1 nos. 0.00

60mm ID 80mm OD 150mm length

11 Cost for supply and fitting of SS 416 shaft sleeve of size 1 job 0.00

58mm ID 78mm OD 150mm length

12 Cost for repairing of rachet plate by doing CI welding, grinding & finishing and making 12 nos, sharp edge of proper size and sample by grinding machine 1 job 0.00

13 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

14 Cost for supplying and fitting following:-

A Key for shaft sleeve 1 no. 0.00

B Key for pump shaft. 1 no. 0.00

C Ratchet pin SS 410 8 no. 0.00

15 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc. in bowl housing in the work shop 1 job 0.00

16 Cos for scraching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black japan paint. 1 job 0.00

17 Cost for supplying and fitting SS bolts & nuts with plane and spring washers of size for discharge header, column pipe & bowl mouth assembly 127 nos. 0.00

18 Cost for supply of TVS make steel bolts with threading on both ends complete with washer and nuts as per size & sample 8 nos. 0.00

19 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) 20 kg 0.00

20 Cost for fitting materials such as cotton waste, grease, gland packing, emery paper, petrol etc required at the time of fitting of pump. 1 job 0.00

21 Cost for fitting of pump accessories and lowering such as ccolumn pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. 1 job 0.00

22 Deduct : Cost of scrap materials Bronze 6 kg 0.00

23 Deduct : Cost of scrap materials Stainless steel 5 kg 0.00

Name of work - Estimate for repairing and servicing of 120(E) HP CF TM pump and motor

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 120 HP CF pump and motor of motor and opening all nut and bolt of pump casing and from foundation base, taking down motor from its base by top lifting of motor and stacking the motor at proper place including hydra/crane 1 job 0.00

2 Cost for complete opening of 120 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

3 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

4 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

5 Cost for providing all labours, tools and tackles at trolly for fitting of 120 HP C/F motor on foundation base and refitting nut bolts & testing also. 1 nos 0.00

6 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

7 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

8 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 1 no. 0.00

88 mm ID x 112 mm OD x 210 mm length

9 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF NU- 218 ECP or equivalent for 120 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

10 Cost for supply and fitting of Spherical Roller bearing no. SKF 2315 ECP or equivalent for 120 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

11 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00

12 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

13 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

14 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

15 Cost for supplying all labours, tools & tackles at site for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

16 providing all labours, tools, tackles for installation of 120 HP C/F pump and motor on foundation,refitting nut-bolt & testing on unload. 1 job. 0.00

17 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles. 10 Kg 0.00

18 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 10 nos 0.00

19 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00

20 Cost for providing all labour, tools and tackles at site for opening electrical connection of 5 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00

21 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00

22 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00

23 Cost for supplying and fitting ball bearing no. 6306ZZ of SKF if required.. 1 nos. 0.00

24 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00

25 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00

26 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00

27 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00

28 Cost for cutting and removing burnt cable sockets and doing cable socketing of 4 mm² 3 core copper cable of both motor and starter. 3 nos. 0.00

29 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00

30 Deduct : Cost of Scrap materials of bronze 5 Kg 0.00

Name of work - Repairing of 120 FASD air break Starter cum control panel for operation of 120 HP motor TM

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 120 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (86.4 - 135) Amp 1 no. 0.00

Push Button 2 no. 0.00

C.T Coil 200/5 3 no. 0.00

Single phase preventer 1 no. 0.00

Ammeter (0-150) amp 1 no. 0.00

Voltmeter(0-500)Volt 1 no. 0.00

selector switch 16 Amp 2 no. 0.00

Phase indicating lamp 3 no. 0.00

Name of work - Estimate for annual repairing and servicing of 177 HP submersible pump set of storm drainage pumping plant .

Sl. No Particulars Quantity Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for disconnecting the 177 HP submersible pump set and taking out from sump well. 1 P/job 0.00

2 Cost for dismantaling of monoblock dubmersible pump set taking out rotor from startor of motor and taking out damaged bearing from rotor and cleaning with petrol and ready for rapair work. 1 P/job 0.00

3 Cost for supplying and fitting Angular Contact ball bearing no. 3313A/C3 SKF Make. 1 each 0.00

4 Cost for supplying and fitting deep grooved ball bearing no. 6313 ZZ3 SKF Make. 1 Each 0.00

5 Cost for supplying and fitting copper cable socket. 4 each 0.00

6 Cost for supplying and fitting cable entry kit. 1 P/set 0.00

7 Cost for supplying and fitting joint rubber gasket. 1 each 0.00

8 Cost for making, supplying and fitting mechanical lock. 1 P/set 0.00

9 Cost for supplying and fitting mechanical seal as per size and sample. 1 each 0.00

10 Cost for supplying following with GST @ 18%, CP @ 10 % and lanour cess @ 1%

(i) Mobil (Super Servo-10) hydrolic 10 P/ltr. 0.00

(ii) Servo bearing grease 5 p/kg 0.00

(iii) Nuts, bolts and key of different sizes 1 P/set 0.00

11 Cost for fitting and bearing in rotor of motor assembling rotor in startor of motor complete set. 1 p/job 0.00

12 Cost for suppyling and fitting rubber insertion sheet of sizes 1/8" thick (black). 6 p/kg 0.00

13 Cost for transportation of pump motor assembly from site to workshop for repair and back to pump house after repair including all cost of labour for loading and unloading. 1 p/job 0.00

14 Cost for providing all labours, tools and tackles at site for lowering of motor pump assembly. Fitting and fixing of sump motor assembly to discharge pipe and testing on load. 1 p/job 0.00

Name of work - Estimate for repairing of transformer of 315 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 315 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 100 ltrs. 0.00

6 cost for transformer oil filtration 200 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Name of work - Estimate for repairing of transformer of 200 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 150 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 100 ltrs. 0.00

6 cost for transformer oil filtration 100 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Name of work- Estimate for cleaning and desilting of sump approach channel, outlet channel etc.

Sl. No. Particulars Quantity Rate In Rs. (To be filled by the Bidder) Amount(Rs.)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Road Sweeper Analysis for desilting, Cost @ 550/day

Assume 1 sweeper required for 1 m3

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

Complete cleaning of filled up sump in all lift and disposal of soil up to a lead of 50 mtr. as required and including all labour, tools & tackles

1 Gardanibagh DPS 27 m3 0.00

Rectangular sump of size - 6m X 3m Height of Mud (Approx) - 1.5 m volume of silt = 6 x 3 x 1.5 = 27.00 m3

2 Cost for providing all labours, tools and tackles at site for repairing, removing rust,dust, scale, smokes etc. from old surface and spray painting two or more coats with anticorrosive bituminous paint of approved brand of two MS grating and channel. 1 job 0

3 Cost for providing all labours, tools and tackles & A 10HP electric pump set for dewatering the area within band including cost of hire of electric pump set (Vide SOR RCD PM6-1001. base Rate 195/Hr. 30 P/Hr 0

Gr10 (3) Name of Work:- Estimate for Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant BABU BAZAR DPS under Mech. works division Buidco, patna for monsoon' 2026 for the year 2026-27 (1 st April 2026 to 31 March 2027 ).

Sl.No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

1 Reparing and servicing of Pump Set- 50 HP VT ,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 1 Job 0.00 0.00

2 Reparing and servicing of FASD Starter cum Panel Board for 50 HP VT motor pump ( As per Annexure - 01A ) 1 Job 0.00 0.00

3 Reparing and servicing of Sumbersible Pump Set 100 HP having Q= 600 lps (As per Annexure - 2) 1 job 0.00 0.00

4 FASD starter of 140 amp for 100 HP sub. pump ( As per Annexure - 2A ) 1 job 0.00 0.00

5 Reparing and servicing of Centrifugal Pump Set 40 HP having Q= 100 lps (As per Annexure - 03) 1 job 0.00 0.00

6 Reparing and servicing of FASD Starter cum Panel Board for 40 HP CF motor pump ( As per Annexure - 03A ) 1 Job 0.00 0.00

7 Reparing and servicing of 25 HP CF Pump Set . (As per Annexure - 04) 1 job 0.00 0.00

8 Reparing and servicing of Panel board and starter for 25 HP C/F Pump Set (As per Annexure - 04A) 1 job 0.00 0.00

9 Reparing and servicing of Pump 75 HP CF having Q= 350 lps (As per Annexure - 5) 1 job 0.00 0.00

10 Reparing and servicing 2 Nos. Vaccum Pump for CF , 3 phase, 440volts, 50hz (As per Annexure - 6) 2 job 0.00 0.00

11 Existing Outdoor Transformer 315 KVA (AS Per Annexture -07) 2 Job 0.00 0.00

12 Existing Outdoor Transformer 100 KVA (AS Per Annexture -08) 1 Job 0.00 0.00

13 Provision foe supply installation of change over 630 Amp 4 pole on load change over with front handle with encloser etc. 1 Job 0.00

14 Supplying and fitting of Bus Duct cabeling of 240 mm² *3.5 core *1.1KV grade PVC insulated and PVC shealthed armoured Aluminium conductor cable in double from transformer to panel board cum Starter.(Make-Polycab, Fenolex, Havells.) 50 P/M 0.00

15 Providing & installation of New water level Gauge 1 Job 0.00

16 Cost for desilting work of rectangular sump and removing of heavy dead plant laying over the sump.(AS Per Annexture -09) 1 Job 0.00 0.00

17 Cost for the deployment of Highly Skilled Pump operators 02 nos.x 03 shift per day from 1st June 2026 to 15th Oct. 2026 and 1 no. x 3 shift from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (1506 shift) 1506 Shift 0.00

18 Deployment of 02 nos.x 3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June to 15th Oct. 2026 and 1 no. x 2 shift from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (1278 shift) 1278 Shift 0.00

19 Complete the below Mention work/ Services of Misc. Work as per instruction of E/I :-

A Writing the name details of officers , Pump operator, Sweeper & capicity of motors on the wall with paint. 1 Job 0.00

B Providing Log book & other Required registers/Misc. 1 Set 0.00

C Providing & Installation of Sufficient Qty. Of Fire Extinguisher as per Requirement. 1 Set 0.00

D Providing & availablity of 24 hrsx365 days in sufficient Qty, required Safety materials as per Instruction of E/I. 1 Job 0.00

20 Cost for Complete Repairing,Servicing of Drinking water tube well cum motor & its Pipe line 1 Job 0.00

21 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at storm drainage I & D pumping plant Babu bazar DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 Job 0.00

Total Rs. :- 0.00

Name Of Work :- Repairing and servicing of 50 HP VT motor and pump

sl.no. Description of work Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs.)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 75 HP VT motor and pump and all electrical connection of motor, taking down motor from from its base by top lifting of motor from motor stool and stacking the motor at proper place 1 job 0.00

2 Cost for providing labour, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc. of 75 HP VT pump. 1 job 0.00

3 Cost for transportation of pump accessories and motor from DPS to work shop and workshop to DPS including hydra and transport vehicle etc. with loading and unloading 1 job 0.00

4 Cost for complete opening of 75 HP motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size. 1 job 0.00

5 S/F of DE and NDE SKF make bearings of appropriate size 2 no. 0.00

6 Cost for greasing the bearing of motor and varnishing, heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit. etc. 1 job 0.00

7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. 1 job 0.00

8 Cost for opening and dismentling of bowl assembly of 50 HPVT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. 1 job 0.00

9 Cost for checking pump shaft, head shaft & line shaft on lathe for straightness and strenghtening the same on hydraulic press machine. 3 nos. 0.00

10 Remetaling and rethreading at both ends upto 3" length on top and line shaft. 3 no. 0.00

11 Cost of making, supply and fitting line shaft bronze bush of size 2 nos. 0.00

58mm ID 78mm OD 125mm length

12 Cost for making and supplying stuffing box bronze bush of size 1 nos. 0.00

58mm ID 78mm OD 100mm length

13 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size 2 nos. 0.00

55mm ID 80 OD 145mm Length

14 Cost of making, supply and fitting bell mouth bronze bush of size 1 nos. 0.00

60mm ID 80mm OD 150mm length

15 Cost for supply and fitting of SS 416 shaft sleeve of size 1 job 0.00

58mm ID 78mm OD 150mm length

16 Cost for making and supplying lantern ring of size 1 job 0.00

17 Cost for supplying and fitting following:-

(i) 'o' rings 3 nos. 0.00

(ii) Stuffing box packing 3 kg 0.00

(iii) Key for shaft sleeve 1 no. 0.00

(iv) Key for pump shaft. 1 no. 0.00

(v) Rubber coupling bush 6 no. 0.00

(vi) steel coupling bolts 6 no. 0.00

(vii) Ratchet pin SS 410 8 no. 0.00

18 Cost for repairing of rachet plate by doing CI welding, grinding & finishing and making 12 nos, sharp edge of proper size and sample by grinding machine 1 job 0.00

19 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

20 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc. in bowl housing in the work shop 1 job 0.00

21 Cost for scrathing old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black japan paint. 1 job 0.00

22 Cost for supplying and fitting SS bolts & nuts with plane and spring washers of size……………for discharge header and column pipe. 55 nos. 0.00

23 Cost for supplying and fitting SS bolts & nuts with plane and spring washers of size……………for bowl mouth assembly. 72 nos. 0.00

24 Cost for supply of TVS make steel bolts with threading on both ends complete with washer and nuts as per size & sample 8 nos. 0.00

25 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) 20 kg 0.00

27 Cost for fitting materials such as cotton waste, grease, gland packing, emery paper, petrol etc required at the time of fitting of pump. 1 job 0.00

28 Cost for supplying and filling mobile lubricant 15 ltr 0.00

29 Cost for fitting of pump accessories and lowering such as ccolumn pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. 1 job 0.00

30 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing on full load. 1 job 0.00

31 Deduct : Cost of scrap materials Bronze 5 kg 0.00

32 Deduct : Cost of scrap materials Stainless steel 4 kg 0.00

Name of work - Repairing of 50 HP Starter cum control panel for operation of 50 HP motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 50 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.

Selector switch 16 Amp 1 nos. 0.00

Bus-bar 400mm x 5mm thick 3 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Three pole MCCB 150 A 1 no. 0.00

Total Cost - 0.00

Name of work - Repairing of 100 HP sub. Motor

sl. No. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 100 HP submersible pump set and taking out 100 sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00

2 Cost for opening and dismentling of 100 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00

3 cost for supplying and fitting double row angular contact bearing of appropriate no. making of SKF 3314A and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

4 cost for supplying and fitting deep grooved single row bearing of appropriate no. making of SKF 6314 and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00

9 cost for supplying following :-

mobil 10 ltr 0.00

servo bearing grease 3 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items. 1 job 0.00

11 Cost for assembly of all parts of 100 hp submersible pump at workshop including all labour tool and tackles. 1 Job 0.00

12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00

Name of work - Repairing of Fully automatic soft Starter cum panel for operation of 100 HP motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 100 HP fully automatic star - delta air break starter with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor MNX 140 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Over load relay unit having (84.6 - 135) Amp 1 no. 0.00

Push Button 2 nos. 0.00

Single phase preventer 1 no. 0.00

C.T Coil 100/5 3 no. 0.00

Digital Ammeter 2 no. 0.00

Digital Voltmeter 1 no. 0.00

selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 2 nos. 0.00

MCB 6A 4 nos. 0.00

MCCB 200 A 50KA 1 nos. 0.00

Name of work - Estimate for repairing and servicing of 40 HP CF pump and motor

S.N. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 40/38 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 40 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing N 313 ECP of SKF Make, if required including all labour tools and tackles 2 nos. 0.00

5 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

6 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

9 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 1 no. 0.00

53 mm ID x 77 mm OD x 150 mm Length

10 Cost for supply and fitting of deep groove ball bearing no. SKF 6211 2RS1 or equivalent for 100 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00

11 Cost for supply and fitting of thrust bearing no. SKF 51211 in DE or equivalent for 100 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

12 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

13 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

14 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

17 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

18 providing all labours, tools, tackles for installation of 40 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

20 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 10 nos 0.00

21 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

Name of work - Repairing of Starter cum control panel for operation of 40 HP motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 50 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Three pole MCCB 150 A 1 no. 0.00

(1) Name of work - Estimate for repairing and servicing of 25 HP CF pump and motor

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 25 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing N 313 ECP if required including all labour tools and tackles 2 nos. 0.00

5 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

6 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

9 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 53mmIDx 77mmODx 150mm Length 1 no. 0.00

10 Cost for supply and fitting of deep groove ball bearing no. equivalent for Electric pump with GST,CP & labour cess etc 2 nos 0.00

11 Cost for supply and fitting of thrust bearing no. in DE or equivalent for Electric pump with GST,CP & labour cess etc 1 nos 0.00

12 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

13 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

14 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

17 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

18 providing all labours, tools, tackles for installation of motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

20 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

Name of work - Repairing of 25 FASD Starter cum panel for operation of 25 HP pump motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 25 HP fully automatic star - delta air break starter with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor A type 40 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Over load relay unit having (37.0 - 50.0) Amp 1 no. 0.00

Push Button 2 nos. 0.00

Single phase preventer 1 no. 0.00

C.T Coil 150/5 rectangular magnet 1 no. 0.00

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 5 nos. 0.00

MCB 6A 4 nos. 0.00

Name of work - Estimate for annual repairing and servicing of 75 HP CF pump no. -1 of storm drainage pumping plant

Sl. No Particulars Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 75 HP CF motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor base and stacking the motor at proper place. 1 job 0.00

2 Cost for providing all labours, tools and tackles at site for opening of all bolts and nuts of pump casing and bearing housing & taking out of bearing housing together with impeller and coupling and pump shaft (complete rotating assembly). 1 job 0.00

3 Cost for opening and dismantling 75 HP pump rotating assembly in workshop and tacking out impeller, pump shaft and bearings from bearing housing, thrust collar, grease shield of DE & NDE, shaft sleeve, bearing cover, etc, and cleaning all inner components for ready for repairing. 1 job 0.00

4 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine. 1 job 0.00

5 Cost for supply and fitting of bronze bush of size 1 job 0.00

6 Cost for supplying and fitting of rubber patta with bolts & nuts for 10" dia. Motor pump couplings.. 1 set 0.00

7 Cost for rubber insertion 1/8” thick. 10 kg 0.00

8 Cost for making steel key for impeller and coupling pulley. 2 nos 0.00

9 Cost for supplying and fitting SS316 lock nut for bearing as per sample. 1 no. 0.00

10 Cost for supplying and fitting SS316 lock washer. 1 no. 0.00

11 Cost for supplying and fitting nose type CI dom nut of nose type for impeller as per sample. 1 no. 0.00

12 Cost for fitting consumable materials such as grease 2 kg, gland packing 5/8”- 5 kg, cotton waste, packing paper, rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

13 Cost for reassembling of pump shaft, its bearing and accessories into the bearing housing and fitting of impeller in workshop. 1 job. 0.00

14 Cost for supplying all labours, tools & tackles at site for fitting of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing,palcing of motor on base, doing coupling of motor with pump, checking and correcting alignment of motor pump and doing all electrical connection of motor & testing on no-load and full load. etc all complete.(1job x 2 days) 2 job. 0.00

15 Cost for transportation of pump and its accessories from pump house to firm workshop and back to pump house (The total weight of pump and accessories is approximately 600 kg & work shall be undertaken by loading on Pick-up Van). 1 job. 0.00

16 Cost for supplying and fitting bolts and nuts of different sizes with washer. 6 Kg 0.00

17 Deduct : Cost of Scrap materials bronze. 3 kg 0.00

18 Deduct : Cost of Scrap materials Stainless steel 6 Kg 0.00

Name of work:- Repairing and servicing of 10 HP vaccum pump.

Sl no Particulars Qty UNIT Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labour, tools and tackles at site for opening electrical connection of 10 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 2 P/job. 0.00

2 Cost for dismantling of 10 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 2 P/job. 0.00

3 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 2 P/job. 0.00

4 Cost for repairing GM impeller by brazing the blades of impeller with brass, turning, polishing and facing the blade to bring it to running condition 2 P/job. 0.00

5 Cost for making supplying and fitting GM bush as per sample. 4 Each 0.00

6 Cost for supplying and fitting ball bearing no. 6307 ZNR of SKF. 4 Each 0.00

7 Cost for supplying and fitting oil seal as per sample. 4 Each 0.00

8 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 2 Each 0.00

9 Cost for repairing of body (brass discs) by facing both the sides. 2 Each 0.00

10 Cost for supplying and fitting split type GM gland flange. 2 Each 0.00

11 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in workshop. 2 Each 0.00

12 Cost for transportation of pump fromKrishnaghat Pump house to work shop and back to pump house. 2 P/job. 0.00

13 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 2 P/job. 0.00

14 Cost for supplying motor pump 3" dia. coupling pulley 2 Each 0.00

15 Cost for making hole as per dia. Of pump & motor shaft and making key way groove in the coupling on lathe machine and fitting & fixing in the pump & motor. 3 P/set 0.00

16 Cost for cutting and removing burnt cable sockets and doing cable socketing of 4 mm² 3 core copper cable of both motor and starter. 10 Each 0.00

17 Deduct : Cost of Scrap materials Gun metal -1 P/Kg 0.00

Name of work - Estimate for repairing of transformer of 315 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 315 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 100 ltrs. 0.00

6 cost for transformer oil filtration 200 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Name of work - Estimate for repairing of transformer of 100 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 100 KVAtransformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 80 ltrs. 0.00

6 cost for transformer oil filtration 100 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Rate Analysis:-

Road Sweeper Cost @ 550/day (For 01 cum)

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

Babu Bazaar DPS.

1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, approach chhannel and inlet chamber etc of Mithapur DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site (i) Area of the sump= 16.7m x 5 m = 83.5 m² , mud height=1.2 m (avg), Total silt =83.5 m² x 1.2 m (avg) = 100.2 m³ P/M³ 100.2 0.00

2 Cost for providing all labours, tools and tackles at site for repairing, removing rust,dust, scale, smokes etc. from old surface and spray painting two or more coats with anticorrosive bituminous paint of approved brand of two MS grating and channel. 1 job 0

3 Cost for providing all labours, tools and tackles & A 10HP electric pump set for dewatering the area within band including cost of hire of electric pump set (Vide SOR RCD PM6-1001. base Rate 195/Hr. 30 p/Hr 0

Gr10 (4) Name of Work:- Estimate for complete Annual Repairing, overhauling, servicing, operation & maintenance of Sewarage pumping Plant BEUR LIFTING under Mech. Work division , Patna for the session 2026-27 (1 st April 2026 to 31 March 2027 )

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Total Amount (Rs)

Rate In Figure Rate In Word

1 Pump Set-30 HP Sub.,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 3 job 0.00 0.00

2 FASD Starter for 30 HP submersible Pump Set. ( As per Annexure - 01A ) 3 job 0.00 0.00

3 Pump with motor Set-60 HP Sub.,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure -02 ) 2 job 0.00 0.00

4 Pump Set-177 HP Sub.,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 03) 1 job 0.00 0.00

5 Trolley mounted Pump Set- 120 HP having Q=375 lps, H=12 m running at 440v, 50hz & 5 HP vacuum pump (As per Annexure - 04) 1 job 0.00 0.00

6 FASD starter of 195 amp for 120 HP CF TM pump (Annexure - 04A) 1 Job 0.00 0.00

7 Trolley mounted Pump Set- 60 HP having Q=195 lps, H=12 m running at 440v, 50hz & 5 HP vacuum pump (As per Annexure - 05) 1 Job 0.00 0.00

8 FASD starter of 95 amp for 60 HP CF TM pump ( As per Annexure - 05A ) 1 Job 0.00 0.00

9 Repairing and servicing of TM diesel engine - 105 HP (Annexure - 6) 1 Job 0.00 0.00

10 Repairing and overhauling of TM diesel engine pump - 105 HP having Q=295 lps, H=13 m & 5 HP Vacuum pump (Annexure - 6A) 1 Job 0.00 0.00

11 300 Amp OCB (As per Annexure-07) 1 Job 0.00 0.00

12 Spray painting over Double coat of paint with red oxide primer of all Existing MS Structure & all Electromechanical equipments by removing old paints. 1 Job 0.00

13 Existing Outdoor Transformer 315 KVA with AB Switches (As per Annexure- 08 ) 1 job 0.00 0.00

14 Existing Outdoor Transformer 200 KVA with AB Switches (As per Annexure- 09 ) 1 job 0.00 0.00

15 Complete the below Mention work/ Services of Misc. Work as per instruction of E/I :-

A. Writing the name details of officers & Pump operator, Sweeper on the wall with paint. 1 job 0.00

B. Providing Log book & other Required registers/Misc. 1 set 0.00

C. Providing & Installation of Sufficient Qty. Of Fire Extinguisher as per Requirement. 1 set 0.00

D. Providing & availablity of 24 hrsx365 days in sufficient Qty, required Safety materials required as per Instruction of E/I. 1 job 0.00

16 Providing & installation of water level Gauge as per direction of E/I . 1 Job 0.00

17 Cost for the proper cleaning of Existing Rectangular sump & its Intake channel complete job as per direction of Engineer-in-charge. (As per Annexure- 10 ) 1 Job 0.00 0.00

18 Deployment of 2 nos. x 3 shifts pump operators during the monsoon period 1st june 2026 to 15th Oct 2026 and 1nos. x 3 shifts pump operators from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026. 1506 shift 0.00

19 Deployment of 2 no.x3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June 2026 to 15th Oct. 2026 and 1 no. x 3 road sweepers from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 1506 shift 0.00

20 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at storm drainage pumping plant BEUR LIFTING DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 job (lumpsum) 0.00

Total Rs. :- 0.00

Name of work - Repairing of 30 HP sub. Motor

sl. No. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 30 HP submersible pump set and taking out Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00

2 Cost for opening and dismentling of 30 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00

3 cost for supplying and fitting bearing of 3310 C3 and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

4 cost for supplying and fitting deep grooved single row bearing of 6309 and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00

9 cost for supplying following :-

mobil 5 ltr 0.00

servo bearing grease 1.5 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items. 1 job 0.00

11 Cost for labour, tools and tackles for making, supplying and fitting of shaft sleeve including turning, polishing, finishing etc, all complete job 1 job 0.00

12 Cost for assembly of all parts of 30 HP submersible pump at workshop including all labour tool and tackles 1 Job 0.00

13 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load including hire charges of pickup van and hydra/crane. 1 job 0.00

Name of work - Repairing of FASD Starter cum panel for operation of 30 HP pump motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 30 HP fully automatic star - delta air break starter with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor A type 40 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Over load relay unit having (37.0 - 50.0) Amp 1 no. 0.00

Push Button 2 nos. 0.00

Single phase preventer 1 no. 0.00

C.T Coil 150/5 rectangular magnet 1 no. 0.00

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 5 nos. 0.00

MCB 6A 4 nos. 0.00

(1) Name of work - Estimate for repairing and servicing of 60 HP sub pump and motor

sl. No. Particulars Qty unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 60 HP submersible pump set and taking out 60 sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00

2 Cost for opening and dismentling of 60 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00

3 cost for supplying and fitting double row angular contact bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

4 cost for supplying and fitting deep grooved single row bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00

9 cost for supplying following :-

mobil 10 ltr 0.00

servo bearing grease 1.5 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

11 Cost for assembly of all parts of 60 hp submersible pump at workshop including all labour tool and tackles. 1 Job 0.00

12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00

Name of work - Estimate for annual repairing and servicing of 177 HP submersible pump set of storm drainage pumping plant .

Sl. No Particulars Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for disconnecting the 177 HP submersible pump set and taking out from sump well. 1 P/job 0.00

2 Cost for dismantaling of monoblock dubmersible pump set taking out rotor from startor of motor and taking out damaged bearing from rotor and cleaning with petrol and ready for rapair work. 1 P/job 0.00

3 Cost for supplying and fitting Angular Contact ball bearing no. 3313A/C3 SKF Make. 1 each 0.00

4 Cost for supplying and fitting deep grooved ball bearing no. 6313 ZZ3 SKF Make. 1 Each 0.00

5 Cost for supplying and fitting copper cable socket. 4 each 0.00

6 Cost for supplying and fitting cable entry kit. 1 P/set 0.00

7 Cost for supplying and fitting joint rubber gasket. 1 each 0.00

8 Cost for making, supplying and fitting mechanical lock. 1 P/set 0.00

9 Cost for supplying and fitting mechanical seal as per size and sample. 1 each 0.00

10 Cost for supplying following with GST @ 18%, CP @ 10 % and lanour cess @ 1%

(i) Mobil (Super Servo-10) hydrolic 10 P/ltr. 0.00

(ii) Servo bearing grease 5 p/kg 0.00

(iii) Nuts, bolts and key of different sizes 1 P/set 0.00

11 Cost for fitting and bearing in rotor of motor assembling rotor in startor of motor complete set. 1 p/job 0.00

12 Cost for suppyling and fitting rubber insertion sheet of sizes 1/8" thick (black). 6 p/kg 0.00

13 Cost for transportation of pump motor assembly from site to workshop for repair and back to pump house after repair including all cost of labour for loading and unloading. 1 p/job 0.00

14 Cost for providing all labours, tools and tackles at site for lowering of motor pump assembly. Fitting and fixing of sump motor assembly to discharge pipe and testing on load. 1 p/job 0.00

Name of work - Estimate for repairing and servicing of 120(E) HP CF TM pump and motor

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 120 HP CF pump and motor of motor and opening all nut and bolt of pump casing and from foundation base, taking down motor from its base by top lifting of motor and stacking the motor at proper place including hydra/crane 1 job 0.00

2 Cost for complete opening of 120 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

3 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

4 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

5 Cost for providing all labours, tools and tackles at trolly for fitting of 120 HP C/F motor on foundation base and refitting nut bolts & testing also. 1 nos 0.00

6 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

7 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

8 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 1 no. 0.00

88 mm ID x 112 mm OD x 210 mm length

9 Cost for supply and fitting of S-cylindrical Roller bearing no. 218 ECP or equivalent for 120 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

10 Cost for supply and fitting of Spherical Roller bearing no.2315 ECP or equivalent for 120 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

11 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00

12 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

13 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

14 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

15 Cost for supplying all labours, tools & tackles at site for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

16 providing all labours, tools, tackles for installation of 120 HP C/F pump and motor on foundation,refitting nut-bolt & testing on unload. 1 job. 0.00

17 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles. 10 Kg 0.00

18 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 10 nos 0.00

19 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00

20 Cost for providing all labour, tools and tackles at site for opening electrical connection of 5 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00

21 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00

22 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00

23 Cost for supplying and fitting ball bearing no. 6306ZZ of if required.. 1 nos. 0.00

24 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00

25 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00

26 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00

27 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00

28 Cost for cutting and removing burnt cable sockets and doing cable socketing of 4 mm² 3 core copper cable of both motor and starter. 3 nos. 0.00

29 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00

30 Deduct : Cost of Scrap materials of bronze 5 Kg 0.00

Name of work - Repairing of 120 HP FASD air break Starter cum control panel for operation of 120 HP motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 120 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (86.4 - 135) Amp 1 no. 0.00

Push Button 2 no. 0.00

C.T Coil 200/5 3 no. 0.00

Single phase preventer 1 no. 0.00

Ammeter (0-150) amp 1 no. 0.00

Voltmeter(0-500)Volt 1 no. 0.00

selector switch 16 Amp 2 no. 0.00

Phase indicating lamp 3 no. 0.00

Total Cost - Total 0.00

Name of work - Estimate for repairing and servicing of 60(E) HP CF TM pump and motor

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 60 HP CF pump and motor of motor and opening all nut and bolt of pump casing and from foundation base, taking down motor from its base by top lifting of motor and stacking the motor at proper place including hydra/crane 1 job 0.00

2 Cost for complete opening of 60 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

5 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

6 Cost for providing all labours, tools and tackles at trolly for fitting of 60 HP C/F motor on foundation base and refitting nut bolts & testing also. 1 nos 0.00

7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

9 Cost for making, supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 1 no. 0.00

73 mm ID X 97 mm OD X 150 mm long

10 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF 3213 A or equivalent for 60 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

11 Cost for supply and fitting of Spherical Roller bearing no. 3313 A or equivalent for 60 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

12 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00

14 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

17 Cost for supplying all labours, tools & tackles at site for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

18 providing all labours, tools, tackles for installation of 60 HP C/F pump and motor on foundation,refitting nut-bolt & testing on unload. 1 job. 0.00

19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 4 Kg 0.00

20 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 6 nos 0.00

21 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00

22 Cost for providing all labour, tools and tackles at site for opening electrical connection of 5 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00

23 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00

24 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00

25 Cost for supplying and fitting ball bearing no. 6306ZZ of SKF if required.. 1 nos. 0.00

26 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00

27 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00

28 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00

29 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00

30 Cost for cutting and removing burnt cable sockets and doing cable socketing of 4 mm² 3 core copper cable of both motor and starter. 3 nos. 0.00

31 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00

32 Deduct : Cost of Scrap materials of bronze 5 Kg 0.00

Name of work - Repairing of 60 FASD air break Starter cum control panel of 60 HP motor TM

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 60 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 95 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Push Button 2 no. 0.00

C.T Coil 200/5 3 no. 0.00

Single phase preventer 1 no. 0.00

Ammeter (0-150) amp 1 no. 0.00

Voltmeter(0-500)Volt 1 no. 0.00

selector switch 16 Amp 2 no. 0.00

Phase indicating lamp 3 no. 0.00

Name of Work : - Estimate for servicing of 105 HP diesel engine and its accessories of TM

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 105 HP diesel engine of Kirloskar make by checking of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 job. 0.00

2 Cost for supplying and fitting/filling following :-

Air filter 1 no. 0.00

Diesel filter 1 set 0.00

Lubricating oil filter 2 no. 0.00

Mobile 10 lit 0.00

Set of flexibles 1 set 0.00

Fuel off solenoid switch 12V DC for fuel pump 1 no. 0.00

Relay in electrical panel 2 no. 0.00

Set of sealings 1 set 0.00

Rocker cover joints 3 no. 0.00

Coolant 10 ltr 0.00

3 Cost for Adjust/Replace(if necessary) V belt condition and tension, Thermostat element,valve clearance, fasteners, exhaust, silencer including all labour, tools and tackles. 1 job. 0.00

4 Cost for Radiator cleaning and repairing of radiator fines externally,radiator tube internally, including all labour, tools and tackles. 1 job. 0.00

5 S/F battery cable and terminal etc as required. 2 no. 0.00

6 S/F battery terminal wire of length 2 mtr. etc as required. 2 no. 0.00

7 Complete overhauling and refitting of self starter by changing the bearing,carbon brush,bushes, nut bolt,washer etc as required during overhauling. with all required materials . 1 Job. 0.00

8 Repairing, overhauling and refitting of alternator with changing its burnt armature,carbon brush,bearings, bushes etc as required. 1 Job. 0.00

Total Cost 0.00

Name of work - Estimate for repairing and overhauling of 105HP CF TM pump & 5 HP Vacuum pump

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 105 HP CF pump and pump casing and from foundation base. 1 job 0.00

2 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

3 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

4 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 1 no. 0.00

85 mm ID x 109 mm OD x 180 mm length

5 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF NU- 2215 ECP or equivalent for 105 HP CF pump with GST,CP & labour cess etc 1 nos 0.00

6 Cost for supply and fitting of Spherical Roller bearing no. SKF 7218 BEC or equivalent for 105 HP CF with GST,CP & labour cess etc 1 nos 0.00

7 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

8 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00

9 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

10 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

11 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

12 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

13 providing all labours, tools, tackles for installation of 105 HP C/F pump on foundation,refitting nut-bolt & testing on unload at DPS. 1 job. 0.00

14 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 4 Kg 0.00

15 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackle TVS make. 10 nos 0.00

16 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00

1 Cost for providing all labour, tools and tackles at site for opening of 5 HP vacuum pump , foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00

2 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00

3 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00

4 Cost for supplying and fitting ball bearing no. 6306ZZ of SKF if required.. 1 nos. 0.00

5 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00

6 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00

7 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00

8 Cost for providing all labour, tools and tackles for reinstallation of engine and pump on base and all connections and testing all complete. 1 jobs. 0.00

9 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00

17 Deduct : Cost of Scrap materials of bronze 5 Kg 0.00

Repairing & servicing of 300 Amp OCB

Sl. Particulars Unit Qty. Rate In Rs. (To be filled by the Bidder) Amount (Rs.)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantaling of 400 Amp OCB cleaning all the components and refitting after repair etc. job 1 0.00

2 cost for supplying and fitting following for 400 Amp OCB with all taxes.

a. fixed copper contact 'A' each 6 0.00

b.fixed copper contact 'B' each 6 0.00

c.Movingcopper contact 'B' each 5 0.00

d. No Volt Coil each 1 0.00

e. T-Oil supply Ltr. 30 0.00

3 Supply of 2.5 sq. mm flexiable copper wier for repair of internal wiering of all the panel board & starter as required. coil 1 0.00

4 Cost for providing all labours, tools and tackles at site for opening and dismantaling internal wiering,copper bus bar of 4nos. Of sub pump set combined panel board ,removing dust and vermins by blowing machine ,cleaning & washing all the internal joints &componentas with petrol and greasing them properly and resrtting all complete job. job 1 0.00

5 Cost for cutting burnt cable socket and doing cable socketting of armoured copper cable wit socket and requisite insulating materials with all taxes. 18 0.00

Name of work - Estimate for repairing of transformer of 315 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 315 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 100 ltrs. 0.00

6 cost for transformer oil filtration 200 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Name of work - Estimate for repairing of transformer of 200 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 200 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 100 ltrs. 0.00

6 cost for transformer oil filtration 150 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Sl. Particulars Unit Qty. Rate In Rs. (To be filled by the Bidder) Amount (Rs.)

Rate In Figure Rate In Word

1 Complete cleaning of filled up sump in all lift and disposal of soil upto a lead of 50 mtr. As required and including all labours tools and takles. (i) Sump-22'x18'x4'(avg)=1584cft=44.89m³. ( ii) intke chanel- 3' x 10' x 1.0' = 30 cft =0.85m³ . Total Silt =( 44.89 + 0.85 )m³. = 45.74 m³. m³ 45.74 0.00

2 Cost for providing all labours, tools and tackles at for repairing and welding 8" more grating with required size, removing rust, dust, sclae, smokes etc from old surface and painting two or more coats with anticorrosive bituminous paint of approved brand of two MS grating and channel of size 9'5"x9' job 1 0.00

Gr10 (5) Name of Work:- Estimate for complete Annual Repairing, overhauling, servicing, operation & maintenance of Sewarage pumping Plant RIDING ROAD , Patna for the session 2026-27 (1 st April 2026 to 31 March 2027 )

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Total Amount(Rs)

Rate In Figure Rate In Word

1 Pump Set-50 HP Sub., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 4 job 0.00 0.00

2 Repairing of FASD starter cum Panel Board for 50 HP SUB motor pump (As per Annexure-01A) 4 job 0.00 0.00

3 Existing Outdoor Transformer100 KVA with AB Switches (As per Annexure- 02 ) 2 job 0.00 0.00

4 Complete the below Mention work/ Services of Misc. Work as per instruction of E/I :-

Writing the name details of officers & Pump operator, Sweeper on the wall with paint. 1 Job 0.00

Providing Log book & other Required registers/Misc. 1 Set 0.00

Providing & Installation of Sufficient Qty. Of Fire Extinguisher as per Requirement. 1 Set 0.00

Providing & availablity of 24 hrs x 365 days in sufficient Qty, required Safety materials as per Instruction of E/I. 1 Job 0.00

Providing & installation of water level Gauge as per direction of Engineer-in-charge (If required) 1 job 0.00

5 Cost for the proper cleaning of Existing circular sump & its Intake channel complete job as per direction of E/I.(As per Annexure- 03 ) 1 job 0.00 0.00

6 Cost for the deployment of Highly Skilled Pump operators 01 nos.x 03 shift per day from 01.04.2026 to 31.03.2027 (1095 shift ) 1095 shift 0.00

7 Deployment of 02 no.x3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June to 15th Oct. 2026 and 1 no. x 2 shift from16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (1278 shift) 1278 shift 0.00

8 Cost of making tube ball (150mm X 100mm Dia. &125m deep) with 1 H.P Submersible motoe pump & Laying Pipe line in campus with water tank etc with Maintenance of miscllaneous work of all Electro machineries for the period of (01.03.2026 to 31.03.2027) at storm drainage pumping plant RIDING ROAD DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 job 0.00

(1) Name of work - Estimate for repairing and servicing of 50 HP sub pump and motor

sl. No. Particulars Qty unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 50 HP submersible pump set and taking out 50 sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 2 Job 0.00

2 Cost for opening and dismentling of 50 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 2 Job 0.00

3 cost for supplying and fitting double row angular contact bearing of appropriate no. making of SKF…………. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 2 no. 0.00

4 cost for supplying and fitting deep grooved single row bearing of appropriate no. making of SKF…………. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 2 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 2 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 2 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 2 set 0.00

9 cost for supplying following :-

mobil 10 ltr 0.00

servo bearing grease 1.5 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 2 job 0.00

11 Cost for assembly of all parts of 50 hp submersible pump at workshop including all labour tool and tackles. 2 Job 0.00

12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 2 job 0.00

Name of work - Repairing of 60 HP Starter cum control panel for operation of 50 HP Submersible motor.

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 50 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 70 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete. 1 job 0.00

Selector switch 16 Amp 1 nos. 0.00

Bus-bar 400mm x 5mm thick 3 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Three pole MCCB 110 A 1 no. 0.00

Total Cost - 0.00

Name of work - Estimate for repairing of transformer of 100 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 100 KVAtransformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 80 ltrs. 0.00

6 cost for transformer oil filtration 100 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Rate Analysis:-

Road Sweeper Cost @ 550/day (For 01 cum)

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

Riding Road DPS.

1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, approach chhannel and inlet chamber etc of Riding Road DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. (i) Circular sump of radious -3.5 m ,Height of Mud (Approx) - 1.20 m =3.14 x 3.5 x 3.5 x 1.20 =46.16M³ P/M³ 47.15 0.00

(ii) Silt in inlet of sump - 7'x 10' x 0.5' (avg.) = 35cft=0.99M³

Total mud= 47.15M³

Gr10 (6) Name of Work.:- Estimate for complete Annual Repairing, overhauling, servicing, operation & maintenance of Sewarage pumping Plant POLICE COLONY DPS , Patna for the session 2026-27. ( 1 April 2026 to 31 March 2027)

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Total Amount ( Rs)

Rate In Figure Rate In Word

1 Pump Set-10 HP Sub., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 4 job 0.00 0.00

2 FASD starter of 25 amp for10 HP sub. pump ( As per Annexure - 1A ) 4 job 0.00 0.00

3 Providing & installation of water level Gauge as per direction of Engineer-in-charge (If required) 1 Job 0.00

4 Cost for the proper cleaning of Existing circular sump & its Intake channel complete job as per direction of E/I.( As per Annexure - 02 ) 1 Job 0.00 0.00

5 Complete the below Mention work/ Services of Misc. Work as per instruction of E/I :-

A Providing & Installation of Name Plate of Buidco. 1 Job 0.00

B Writing the name details of officers & Pump operator, Sweeper on the wall with paint. 1 job 0.00

C Providing Log book & other Required registers/Misc. 1 set 0.00

D Providing & Installation of Sufficient Qty. Of Fire Extinguisher as per Requirement. 1 set 0.00

E Providing & availablity of 24 hrsx365 days in sufficient Qty, required Safety materials required as per Instruction of E/I. 1 job 0.00

6 Supply and fitting of new 30 amp FASD starter with NHD Contactor, electonic timer & electronic over current relay with ammeter & voltmeter and MCB etc of for 10 HP sub. Pump. 3 job 0.00

7 Cost for the deployment of Skilled Pump operators 01 nos.x 03 shift per day from 01.04.2026 to 31.03.2027. 1095 shift 0.00

8 Demolishing cement concrete manually or by mechanical means including disposal material within 50 m as per direction of E/I 3m x 3m x 0.200m + 3 sides x 3m x 1m x 0.200m =3.6m 3.6 P/m³ 0.00

9 Providing and laying in position cement concrete 1:2:4 (1 cement: 2 coarse:4 sand) graded stone chips 40 mm nominal size all complete as per standard specification 3m x 3m x 0.200m + 3 sides x 3m x 1m x 0.200m =3.6m 3.6 P/m³ 0.00

10 Providing and laying Mild steel round bar 12mm dia for rainforcement as per direction of E/I. 40 Nos. x 3m x 0.89 kg/m =106.8 kg say 1.07 quintal 1.07 P/Qnt 0.00

11 Deployment of 2 no.x3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June 2026 to 15th Oct. 2026 and 1 no. x 2 shift during from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 . 1278 shift 0.00

12 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at storm drainage pumping plant POLICE COLONY DPS.The Bidder shall be totally responsible for Proper Functioning of the DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 job 0.00

Total Rs. :- 0.00

(1) Name of work - Estimate for repairing and servicing of 10 HP CF pump and motor

sl. No. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 10HP submersible pump set and taking out 10 hp hp sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00

2 Cost for opening and dismentling of 10HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00

4 cost for supplying and fitting deep grooved single row bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00

9 cost for supplying following :- 0.00

mobil 5 ltr 0.00

servo bearing grease 1.5 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

11 Cost for assembly of all parts of 10 HP submersible pump at workshop including all labour tool and tackles. 1 Job 0.00

12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00

Name of work - Repairing of 15 HP Starter cum control panel for operation of 10 HP sub motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 10HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 25 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Push Button 2 nos. 0.00

2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.

Selector switch 16 Amp 1 nos. 0.00

Bus-bar 400mm x 5mm thick 3 nos. 0.00

Total Cost - Total Cost 0.00

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Rate Analysis:-

Road Sweeper Cost @ 550/day (For 01 cum)

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

Police Colony DPS.

1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, approach chhannel and inlet chamber etc of Police Colony DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site (i) Area of the sump = 4.87m x4.87 m =23.72 m² , mud height=1.0 m (avg), Volume of silt =23.72 m² x 1.0 m (avg) = 23.72 m³ (ii) Silt of inlet = 2.44 m x 4m x 1 m = 9.76 m³ , Total Silt =( 23.72 + 9.76) m³ =33.5m³ P/M³ 33.5 0.00

Sl. No. Abstract Amount

1 Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant MITHAPUR DPS under Mech. works division Buidco, patna for monsoon' 2026 for the year 2026-27 (1 st April 2026 to 31 March 2027 ). 0.00

2 Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant GARDANIBAG DPS under Mech. works division Buidco, patna for monsoon' 2026 for the year 2026-27 (1 st April 2026 to 31 March 2027 ). 0.00

3 Estimate for Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant BABU BAZAR DPS under Mech. works division Buidco, patna for monsoon' 2026 for the year 2026-27 (1 st April 2026 to 31 March 2027 ). 0.00

4 Estimate for complete Annual Repairing, overhauling, servicing, operation & maintenance of Sewarage pumping Plant BEUR LIFTING under Mech. Work division , Patna for the session 2026-27 (1 st April 2026 to 31 March 2027 ) 0.00

5 Estimate for complete Annual Repairing, overhauling, servicing, operation & maintenance of Sewarage pumping Plant RIDING ROAD , Patna for the session 2026-27 (1 st April 2026 to 31 March 2027 ) 0.00

6 Annual Repairing, overhauling, servicing, operation & maintenance of Sewarage pumping Plant POLICE COLONY DPS , Patna for the session 2026-27. ( 1 April 2026 to 31 March 2027) 0.00

Project Director (Mech.)

Patna West (Mech.)

Works Division, Buidco, Patna.