Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.1 LAccepted-AOC SUMEL BAMANWAS SWAI MADHOPUR | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹36.5 L+₹66,007.44 (1.84%)Rejected-AOC | L2 | Rejected-AOC Higher bidder | |
| 3 | L3₹38.4 L+₹2.5 L (7.12%)Rejected-AOC | L3 | Rejected-AOC Higher bidder | |
| 4 | L4₹39.2 L+₹3.4 L (9.43%)Rejected-AOC | L4 | Rejected-AOC Higher bidder | |
| 5 | L5₹40.0 L+₹4.1 L (11.6%)Rejected-AOC BAZAR RAM SUKH DASS FEROZEPUR CITY 152002 PB | FIROZEPUR | PUNJAB | 152002 | L5 | Rejected-AOC Higher bidder |
Tender Value
Refer Docs
EMD Value
₹72,000
Closing Date
26 Nov 2020, 6:00 pmClosed
GE (EAST) FEROZEPUR CANTT
GE (EAST) FEROZEPUR CANTT PIN-152001
Augmentation of LT UG Cable and certain items at 7 IDSR Offrs Mess and Provn of 02xSolar Water Heating Sys of cap of 1000 LPD for OR Line bathroom at N Zone of 161 (I) FWC EME and certain sanctioned Rev and Minor wks under GE (E) Fzr Cantt
2020_MES_378302_1
8057/GE/E/FZR/20-21
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (EAST) FEROZEPUR CANTT
₹72,000
Yes
21 Jan 2021
7 Nov 2020
28 Nov 2020
7 Nov 2020
26 Nov 2020
21 Nov 2020
Amount
Excavation in trenches in soft/ loose soil not exc 1.5 m deep and n.exc 1.5 mtr wide for laying of cable,etc. and getting out complete all as specified and directed by E-In-Charge.
Removing of surplus soil (soft/loose) obtained from excavation to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and as directed .
Returning, filling in earth including spreading leveling and well ramming excavated soil in layer not exceeding 25 cm thick each layer, back in trenches after cable have been laid & tested,poles,stairs,struts have been erected & tested complete all as specified and directed.
S & Laying well burnt sub class B bricks cover to underground cable (old size) complete all as specified and as directed .
M & L dry and clean fine sand for cable cushioning for cable protection complete all as directed. Note:- Punned down thickness shall be measured and paid.
S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 50 Sqmm nominal cross section, 3.5 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified . Make- Finolex, Universal cables & Polycab.
S&F cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm 3.5 core.Make-Havells,Polycab,Gloster complete all as specified and as directed .
Supply and fix ON LOAD change over switch 415 V In sheet metal enclosures 4 pole of capacity 100 Amps complete all as specified and as directed .
M&L for Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 metre below normal ground level with top edge of the earth plate not less 1.5 metre (Below Ground Level) connected to galvanized iron earth strip 25x4 mm by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate, precast RCC type B1 using 20 mm graded crushed stone aggregate for RCC cover with suitable handle, excavation and earth work in any type of soil, 50mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 50 mm bore “light grade” galvanized iron protection pipe for earth strip 25x4 mm upto 5m length, charcoal, common salt, complete all as shown in EP No 1 of SSR 2009 Part-I, connected to test point complete, testing on completion, complete all as specified and directed.
Supply & fixing of LED Street light 60 Watt made up of pressure die cast housing with toughned glass Aesthetically designed roadway luminiare with excellent thermal management IP 66 protection complete all as specified and directed .
Supply & fixing PVC insulated and FR PVC round sheathed copper conductor flexible 1100 volts 1.5 Sqmm 3 core for connection from OH Line to street light fittings. Complete all as specified and directed.
S&F GI Bracket for street light fitting bend to shape made out of GI pipe light grade 32/40mm bore upto 1.5 mtr long etc complete with two sets of MS flat clamps of size 40 x 5 mm duly painted with two coat of aluminum paint with nuts/bolts/washers for fixing arrangement to pole /wall complete all as specified and as directed .
Supply and fixing automatic street light switch for automatic swithcing of street light/high mast light (timer switch) based on lux level of natural light. The sensor alongwith suitable power contractor as per IEC - 60947-4-4 , MCB and support terminal and enclosed in pole/wall mounted factory made PVC enclosure made out of rust , shock, termite proof and FR grade confirming to IP 54 of capacity 5 KW, Single phase , 240 V of Make- Kaktiya Energy system (model - swadeep 02EC5 KW1P or quivalent model of /bajaj/Havells as approved by GE) complete all as specified and as directed .
Supply and laying GI pipe light grade 40mm dia with all fittings for cable protection complete all as specified and as directed .
S&F Prestressed concrete pole, 7.5 metres long. 102mm x 120mm at top and 102mm x 229mm at bottom,class 11 complying with rqmt of IS 1678-1978 incl painting of poles with two coats of synthetic enamel paint/over a coat of priming paints in black and white strips upto 1.5 mtr high, heigt from top of PCC block complete all as specified and as directed . Note: (PCC and earth work shall be measured and paid separately).
Supply & fixing street light pole mounted cable junction box IP-65 of Size 200x160x98 with four terminal for 3 phase /4 core made out of thermal plastic material suitable for 16/25 UG sqmm cable including clamps Made out of MS flat 40x5mm including bolts, nuts duly painted synthetic enamel paint etc complete all as specified & directed Including taking out Old unserviceable Junction box and connected item complete all as specified and as directed . Make : Hensel CAT part No k 9255 or other equivalent makes of sintex as approved by GE
Supply and fixing PVC conduit from junction box to street light fittings of dia 15mm/20mm dia Heavy grade 6 mtr long with 2xpair of MS clamps made out 40mmx5mm MS flat iron bolts,nuts complete including two coat of synthetic enamel paint (first grade) over a coat of red oxide primer complete all as specified and as directed .
M& L for cement concreted (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation of poles and mass concrete etc complete all as specified and directed.
M&L Cement concreted (1:2:4) type B-1 using 20 mm graded stone aggregate as in foundation of electric poles/struts/ etc including necessary form work, fair finished surfaces without using extra cement complete all as specified and directed.
M&L Cement concreted (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation of stay assembly/feeder pillar/LT panel etc including necessary form work, fair finished surfaces without using extra cement complete all as specified and directed.
Supply and fixing automatic street light switch for automatic swithcing of street light/high mast light (timer switch) Integrated VMS Model for Three Phase Load light. The sensor alongwith suitable power contractor as per IEC - 60947-4-4 , MCB and support terminal and enclosed in pole/wall mounted factory made PVC enclosure made out of rust , shock, termite proof and FR grade confirming to IP 54 of capacity 5 KW, Three phase of make Make- Kaktiya Energy system (model - swadeep 02EC3 KW1P or quivalent model of /bajaj/Havells as approved by GE)
Supply and laying GI pipe "light grade " for cable protection including taking out old/broken/rusty of size 80 mm bore complete all as specified and directed.
S&F MCCB of cap 100 Amp,415 V, 16 KA 4 pole as incomer control to be concelled in wall with vertical DB box complete all as specified and directed.
S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified and directed.
S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 16 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .
S&F sheet metal enclosure Double door type made out of CRCA 1.2 mm thick MS sheet,powder coated. partially immersed in wall,VTPN DB with 200 Amps rated bus bar 4 way,415 volts vertical type, dust and vermin proof, sutable for incorporation of MCCBs/MCBs duly concealed in wall, factory made, including thermal release adjstable type 4 pole 63 Amps, 50 Hz ,415 Volts with repturing capacity 16 KA and make good the disturbed surfaces with matching color, complete all as specified . Make- SIEMENS, LEGRAND & SCHNEIDER
Taking down carefully existig copper/ alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fittings and fixtures such as Switches, Sockets, Ceiling Roses, Holders, Bracket fittings with Battens/ Conduits/ Wires,Tube Light fittings and ceiling fans as exist at working spot and making good the disturbed surfaces of walls and ceiling etc. and to match with existing colour and shade complete all as specified and directed.
Taking down carefully unserviceable tube light fittings any type or wattage from height upto 3 meter on walls/ ceiling complete all as specified and directed.
Dismantling and taking down fluorescent street light fittings from bldg, height upto 3-5 mtrs complete all as specified and directed.
Taking down carefully unserviceable main switches and distribution boards with MCCB/ MCB's (Single phase or Three phase) of any capacity complete all as specified and directed.
Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing complete all as directed and specified
S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following :- (a) One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch.
All as per item No 34 above but One 3 pin 6 Amp socket outlet point controlled by one switch on Independent board.
All as per item No 34 above but One 3 pin 6 Amp socket outlet point controlled by one switch on same board.
All as per item No. 34 above but one 20 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable.complete all as specified and directed.
S&F Switch piano flush type 6 amps, single pole one way, white in colour, duly ISI marked. complete all as specified and directed.
S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked. complete all as specified and directed.
S&F Socket outlet 2 in 1, 5 pin, 6 Amps, white in colour, duly ISI marked. complete all as specified and directed.
S&F Power Socket outlet, UNI, 10 Amps & 20 Amps, white in colour type duly ISI marked. complete all as specified and directed.
S&F Bell push switch, flush type, 6 Amp, single pole, white in colour, duly ISI marked. complete all as specified and directed.
S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked. complete all as specified and directed.
S&F Ceiling rose, 240 volts, 50Hz, 6A, surface type, Pilot 3 plate, white in colour, 3 terminals duly ISI marked. complete all as specified and directed.
S&F Lamp angle holder (Plastic Ring), 240 volts, 50Hz, 6A, white in colour, duly ISI marked. complete all as specified and directed.
S&F Rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, white in colour, duly ISI marked. complete all as specified and directed.
S&F LED 20 W LED 6000 K, indoor E-Lite LED Curve with wide angle profile. High lumen batten with efficacy of 100 Lumens, energy efficient fixed to wall/ ceiling etc complete. complete all as specified and directed.
S&F LED bulb of 10 Watt, 950 Lm, 6500 K, complete all as specified and directed.
S & F bldg LED Security light fittings 25 watts including GI bracket bend to shape made out of GI pipe light grade of size 25mm nominal bore, suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements on wall including connecting up with 2 core copper flexible wire of size 23/00.0076 complete all as specified and directed.
S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed.
S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 4 way, IP-43 protection, partly embedded at wall, 240 volts, dust and vermin proof, suitable for incorporation of MCBs (MCB SPN/ MCB DP), factory made, including making good distrubbed surfaces with matching colour and shade,complete all as specified and directed.
S&F MCB SPN, 63 Amps, 240 volts, "C" curve, 10KA duly ISI marked, complete all as specified and directed.
S&F MCB SP, 06 to 32 Amps, 240 volts, "B" curve 10 KA duly ISI marked, complete all as specified and directed.
S&F MCB SPN 20 Amp 240 Volts 'B' curve 10 KV duly ISI marked, complete all as specified and directed.
Supply and draw sub main wiring of two run 6.0 sqmm single core PVC insulated ( FRLS) , unsheathed multistranded copper conductor cable 1100 Volt grade, draw through and including PVC conduit heavy duty and accessories of 25 mm size and fixed with PVC saddles and cadmium plated steel screws to the surfaces of the wall/ceiling including one run of 4.00 sqmm single core PVC insultated unsheathed copper earth continuty conductor complete alll as specified and directed. Make :- finolex/ polycab. Note :1. Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one length. 2. The rates quotes against this item is deemed to be inclusive of making good the disrurbed surfaces to match with the existing surfaces.
M&L for Sub main wiring with two single core 2x2.5 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 2.5 sqmm drawn in PVC rigid conduit connected to main board complete all as specified and directed. (Two runs cable and one number earth wire and suitable PVC conduit shall measured together as unit length).
Supplying, laying, jointing and testing XLPE insulated, armoured, electric cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 6 sqmm 3 core confirming to IS:7098-1985 laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed.
Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified and directed. Note : Ceiling fans obtained from taking down shall be used for hanging.
S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire. complete all as specified and directed.
M&L for Earthing complete with galvanized steel plate elecrode of size 60cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a coats of red oxide primer to exposed steel surfaces including excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mtr as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) .complete all as specified and directed.
S&F Batten for LED tube 20 W indoor Highly robust Industrial Box type luminaire suitable for single T8 LED Tube fixed to wall / ceiling etc complete, including Crysal Glass LED tube with in built driver double sided connection of 20 W complete all as specified and directed. Make - Crompton (ECO-I) Part No- IGP161LT8-16) & LED tube (Part No- LGT8-20-865-2) or equivalent in Havells/ Bajaj as approved by GE
S&F stationary water heater (Geyser) vertical storage type, electric driven, closed vented type (5 star rated marked) of capacity 25 Ltrs, complete all as specified and directed. Make-Havells, Model No-NaZZ, Part No. GHWENZTWG025 of Havells or equivalent in CG, Bajaj, Recold as approved by GE
S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F 15 mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, complete all as specified and directed.
S&F Non return valve suitable for 15 mm bore pipe, complete all as specified and directed.
S&F PVC connection of 15mm dia 45 cm long with PTMT nuts suitable for hot water supply complete all as specified and directed.
S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed. Make:-Crompton, Model.EXHD300-6-1 or equivalent in Khaitan/CG/Bajaj as approved by GE
Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.
M&L for Fabrication of angle iron for supply and fixing stand of cold water tank of cap 1000 ltrs made out of60x60x6 mm angle iron of height 2500mm and 1500mmx1500mm chequered plate complete all as specified directed.
Supply and fixing Rotational moulded polyethylene water storage tank of cap 1000 ltrs ( Cylindrical vertical type with close top )hoisted and fixed in position all as specified and directed.
M&L for GI Tubes, ' medium grade' galvanised, with all fitting and fixed complete to walls and ceiling or laid in floor of 15 mm bore dia with clamps & bolts as required complete alll as specified and directed.Make :- Jindal/ Praksh Surya / Oswal as approved by GE
M&L for GI Tubes, ' medium grade' galvanised, with all fitting and fixed complete to walls and ceiling or laid in floor of 20 mm bore dia with clamps & bolts as required complete alll as specified and directed.Make :- Jindal/ Praksh Surya / Oswal as approved by GE.
M&L for lagging of heat insulator PVC Foam type of internal dia suitable for 15 mm GI pipe , min 15 mm thick walls and wrap with 0.01 mm thick aluminium wraping tape duly one sided adhesive on 15 mm dia GI pipe for hot water Supply from solar water heating system to bathroom complete all as specified and directed.
S& F Factory made sheet metal enclosures DB 2 way single door type made of CRCA 1.2 mm thick M.S. sheet , powder coated , suitable for incorporation of MCBs , concealed in wall ,including making good disturbbed surfaces with matching colour, complete all as specified . Make HPL / Indo Asian as approved by GE.
Supply & fixing for gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed. of size 15 mm .Make Sant/ BIR or other equivalant makes as approved by GE
Supply and fix gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete of size 20m dia ISI markd complete all as specified and directed.bir/ Prayag or other equivalant makes as approved by GE
Supply and fix Bib Tap fancy type cast copper alloy with crutch or butterfly handle, screwed down for iron pipe 15mm dia . Complete all as specified and directed. Make :- Janco, Sanco etc.
Cutting of existing CI/GI tubing of 80/50mm and insertion of GI pipe 20 mm dia all in posion as specified and directed
Providing cement concrete of 1:2:4 type B1 with 20 mm graded aggregate in foundation, including rafts footing, foundation beams, plinth beams, basement for water coolers complete all as specified and directed.
M&L for plinth of transformer of size 2.1x2.1x1 mtr including excavation work , PCC 1:4:8 type D2 (using 40 mm graded stone aggreate) for foundation , Brick work with sub class 'B' bricks and rendering of 15 mm thick cement plaster on of brick / concrete work , sand filling for foundation , Moorum / red bujri filling in floor and hard core of broken bricks of gauge n exc 63 mm depsited ,spread and fiiling in layers and cement conerete type C-2, 1:3:6 ,150 mm thick and Cement concrete type B-1, 1:2:4, 100 mm thick complete all as specified and directed. Note :- Item rate also including Shifthing of transformer from Existing location to new plinth properly.
Supply and fix XLPE insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor rating 1100 volts cross sectional area 185 Sq mm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete alll as specified and directed
S & F cable joint kit for 11 KV grade cable for outdoor end termination , heat shrink type, joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured, Aluminium conductor cable of size 185 sq mm. Complete all as specified and directed.
S & F cable joint kit for 11 KV grade cable for outdoor end termination, heat shrink type, joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured, Aluminium conductor cable of size 70 sq mm. complete all as specified and directed
Boring of holes under road, pavement, hard standing for laying GI pipe of 100/80 mm dia for crossing cable including getting out, disposal of rubbish off to a distance upto 50 Mtrs complete alll as specified and directed
Supply and laying GI pipe "light grade " for cable protection including taking out old/broken/rusty of size 100 mm bore complete alll as specified and directed
M&L Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 metre below normal ground level with top edge of the earth plate not less 1.5 metre (BGL) connected to galvanized iron earth strip 32 x6 mm by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 50mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 50 mm bore “light grade” galvanized iron protection pipe for earth strip 32 x6 mm upto 5m length, charcoal, common salt, complete all as shown in EP No 1 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion, complete all as specified and directed. Note : GI earthstrip 32 x6 mm more than 7.5 m will be measured and paid separatly.
KAILASH CONSTRUCTION COMPANY
JAWAHAR CONSTRUCTION COMPANY
Ms Hari Singh
RAKESH KUMAR SATISH KUMAR
HAPPY ELECTRICALS
ABHISHEK AND COMPANY
AKASH ELECTRICALS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .