Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹23.7 L+₹2.3 L (11.0%)Rejected-Finance | L2 | Rejected-Finance Quoted amount is more than L1 | |
| 3 | Rejected-Technical SHANTI KUNJ CHESIRE HOME ROAD BARIATU RANCHI 834009 JHARKHAND | RANCHI | JHARKHAND | 834009 | - | Rejected-Technical Wron DD Submitted. | |
| 4 | Rejected-Technical SEVA SADAN ROAD UPPER BAZAR RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | - | Rejected-Technical Not enlisted in eligible category. |
Tender Value
₹19.5 L
EMD Value
₹39,000
Closing Date
12 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Sahil Ratusaria, IDSE
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
REPMNTCNTFGLPMNGSTCIGI DSTRBMNSNCNTD REPREPMNTACSR CDTR LTDSTRBUTN PNTNGBTOSTELTBLR PLES CNTDITM CRTNREP ELCTR STRGE TYPE GYRS CNCTDINCLG REPMNTOF REFRIGTN AIRCNDTING EQUIPT OTHRCNTDITEM WK REPMAINT REFRGRATN N AIRCNDTIING EQUMNTS ATJSR GERANCHI
2023_MES_633914_2
8400/1210/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class E Cat a (ii)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹39,000
Yes
27 Mar 2024
29 Jan 2024
14 Feb 2024
30 Jan 2024
12 Feb 2024
30 Jan 2024
Amount
Excavating in trenches not exceeding 1.5 wide and not exceeding 1.5 mtr in depth in soft/ loose soil for laying of pipes and getting out, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil, complete all as specified and as directed.
Removal of surplus soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.
M&L taking up/ down of GI pipes including all fitting from trenches/walls /floors and connections etc, complete all as specified and directed.
15 mm bore dia
20 mm bore dia
25 mm bore dia
40 mm bore dia
50 mm bore dia
80 mm bore dia
100 mm bore dia
CI/DI 100 mm bore dia
S&F in replacement tubes,' medium grade', galvanized, with all fittings; laid in trenches of following sizes:
15 mm bore dia
20 mm bore dia
25 mm bore dia
40 mm bore dia
50 mm bore dia
80 mm bore dia
100 mm bore dia
S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, for following bore dia, complete all as specified and directed. Make-Shakti/Scud. Note : Gate valve fixed and removed at difrent places.)
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
M&L Bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.)Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) all as specified and as directed , upt 150mm bore dia collars, caps and plugs
M&L Rubber gasket joint for flange joint all as specified and as directed , upt 150mm bore dia, complete all specified and directed.
S& Replace cast iron sluice valve with flanged ends, confirming to IS-780 type PN-1.6 cast iron body with CI wheel brass spindle, joints with rubber gaskets including bolts nuts and washers complete with ISI mark size 100 mm CI line in position, complete all specified and directed.
All as per Item No 09. above but size 80mm bore pipe
Construction of Brick masonary valve pit chamber of size 1200x1200x1200(internal dimension) including necessary excavtion and earth work in any type of soil,angle iron frame ms sheet cover with locking arrangements incl painting two coats symthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Construction of Brick masonary valve pit chamber of size 900x900x900(internal dimension) including necessary excavtion and earth work in any type of soil,angle iron frame ms sheet cover with locking arrangements incl painting two coats symthetic enamel paint over a coat of red oxide primer complete all specified and directed.
Ductile iron pipe S/S including special Class "k-7"supplied and laid complete 100 mm dia complete all specified and directed.
M&L dismantling of 50 HP capacity motor from 3 phase centrifugal pump set & segregating to its parts for repairs and M & L rewinding of motor with super enameled copper wire of same wire gauge of existing wire including varnishing, turning and polishing to the shaft and / or rotor, including replacement of suitable bearing and spare parts ( if required ) etc incl removing old unsv burnt wire complete & refitting motor after completion of work including testing of motor of following capacity complete all specified and directed. Note : (i) S&F cost ' of bearing and terminal plate will be measured and paid seperately. (ii) Rate for transport site to work shop and work shop to site are deemed to be included in the quoted rates.
S&F in repacement of ball bearing suitable for 50 HP motor complete all as specified & directed at site.
S& F in replacementof coupling suitable for 50 HP Pump set including necessary nuts, bolts, washers, rubber bush etc complete all as specified and directed at site.Note : the rate quoted above are deemed to be included the cost of minor alteration to the shaft of the Pump set for fixing of above coupling complete
S&F in replacement of terminal plate with brass nuts,washers suitable for 3 phase 50 HP pump motor complete all as specified and directed at site.
S&F in replacement of shaft sleeve suitable for centrifugal pump set of capacity 50 HP complete all specified and directed.
S&F in replacement of Impeller set suitable for centrifugal pump set of capacity 50 HP complete all as specified and directed at site.
M&L dismantling centrifugal pump and motor 50 HP three phase from foundation with base plate, nut, bolt, to shift safe place and cleaning pump motor part with greasing, oiling, gland dori, air release valve, pipe and minor repair and fixing in new foundation with new nut, bolt, elect connection complete with running condition without vibrating the foundation complete all as specified and as directed.
S&F in repair, star delta starter fully automatic suitable for electric pumpset motors 50 HP cap 3 phase 415volts, comprising of main star delta starter with 'D' range contractor & electric star delta timer in S.S. enclosure complete all as specified & directed by Engineer-in-charge. Make : C&S , L&T / Siemens of equivalent size and specification.
S&F in replacement Tyre Type Automatic Flexible Cushion Couplings – TC Series of TC/P/014 and TC/Q/013 suitable for centrifugal pump sets.
S&F in replacement GREASED AND GRAPHITED Gland packing made from natural fiber, lubricated and graphited used in centrifugal pumps size of 10mm and 12mm, complete all specified and directed.
S&F in replacement, to water level indicator for over head tanks including replacement of brass pully copper float steel wire rope of required size etc. including painting of water level indicator and making good of water level indicator and marking distinctively the scale of water level by synthetic enamel paint, complete all specified and directed.
M&L repair existing leakage of GI pipe line 15 to 25 mm by welding or cutting and making threading for insertion nipple, socket, union socket, pipe piece up to 01 mtr for any place complete all specified and directed.
M&L repair existing leakage of GI pipe line 40 to 80 mm by welding or cutting and making threading for insertion nipple, socket, union socket pipe piece up to 01 mtr for any place complete all as specified and directed.
M&L repair existing leakage of CI pipe line 100 mm by excavation, cutting of pipe for insertion new pipe, if required change the joint, MS round plate clip set for any size of pipe at any place complete all as specified and directed.
S&F in repais, Brass foot valve ball type heavy duty suitable for 100 mm bore pipe line including dismantling of old unserviciable foot valve any type and make from suction pipe of pumpset at any place complete all as specified and directed by Engineer-in-charge. (a) The rate quoted for above item are deemed to be included the cost of minor repair/alteration to the pipe or fixing of above foot valve complete. (b) The all complaint should be done within two days of any place/location other wise Rs. 500/- panality recovered from the contractor.
M&L spray painting of Pump & Electric motor at site with one coat of weather proof grey synthetic enamel paint after removing all dust rust carbon and oily spots, including well preparation of surfaces and writing / marking SM / MES No as 25 mm stencil with white paint complete all as specified including painting of suction & delivery pipe lines inside the pump house and arrow marking of water direction all as specified and directed for pump set rating of 20 HP to 75 HP at any place complete all specified and directed.
S&F in replacement MCCB , 100 Amps 415 volts four pole 16 KA repturing capacity complete all as specified and directed.
S&F in replacement MCCB , 63 Amps 415 volts four pole 16 KA repturing capacity complete all as specified and directed at site
S&F in replacement MCCB , 250 Amps 415 volts AC with breaking capacity 36 KA, four pole complete all as specified and directed at site .
S&F in repair LED street light fitting 1x45 watt with pressure die cast aluminium housing,heat resistant toughened glass with fram, duly prewired inbuilt LED module IP 66 Protection complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of size 1.5 sq mm including GI tubing 40mm dia light grade 1.5m long band to shape for mounting of security light with 2 nos MS,FI clamp including plinth with nut bolts with PVC 20mm conduit for cable including clamps etc complete all as specified and directed Make: Crompton Greaves Cat part no LSTO-45-CDL or Equivalent Make: Havells/Philips/Bajaj/Wipro.
Taking down old unserviceable LT cable, Supply and Laying LT cable in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer In charge of cross sectional area and core of following sizes:-
Size of cable 10 Sq.mm 2 Core
Size of cable 16 Sq.mm 4 Core
Size of cable 25 Sq.mm 3 1/2 core
Size of cable 50 Sq.mm 3 1/2 core
Size of cable 70 Sq.mm 3 1/2 core
S & L quarry ' M ' sand for cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep over the cable, complete all as specified and directed.
M&L laying Bricks, common burnt clay building sub-class 'A' old size bricks for protection of cable in trenches, complete all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size 32x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. NOTE :- (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Item includes the cost of 7.5M GI pipe for protection of earth lead. Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.5 M earth lead. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate
M&L in repair of GI tubing light grade of size 80 mm for protection of cable in trenches/on pole complete all as specified and directed
M&L in repair of GI tubing light grade of size 50 mm for protection of cable in trenches/on pole complete all as specified and directed
M&L Cutting, trimming and vending tree branches falling on overhead head lines (HT/LT)after arranging electrical shutdown from department or RSEB including taking all precautions while working on lines. [Note:- (i) The length of span between two poles shall be measured in which trees are falling on overhead electric conductors. (ii) Required T & P will be arranged by the contractor at his own cost.
S&F junction box made from SMC/FRP sheet ready made of size 300 x 200 x 105 mm with aluminium bus bar of 100 Amp capacity for RYB and neutral made in suitbale size fixed inside the junction box with necessary supporting insulators fixed on hylem sheet fixed to pole /Wall with MS clamp 20 X 3 mm and nuts & bolts, MCB SP 6 Amp 10 KA 240 V - 1 No and aluminum lugs for connecting cables, complete all as specified and directed
M&L disconnecting the electric supply, disconnecting the water pipe (Cold and hot water) from the geyser of any make and any capacity, taking down the geyser by unscrewing nuts, bolts and washer from its existing place, cleaning geysers tank body properly, removing scaling with the help of brush , cleaning material etc and re-fixing the geyser at its original place by screwing nuts, bolts & washer, connecting the water pipe (hot and cold water) and the electric supply including testing of geyser for proper working to the entire satisfaction all as specified and as directed by Engineer-in-Charge. Note :- Spares required for geyser will be measured and paid separately.
Supply and Fix electric water heater storage type steel body with copper inner tank and heating element upto2 KW capacity 25 Litre BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, as ,connection piece etc. Make : Bajaj/C&G/ Havell's (Monza EC). Note : Old uns geyser will be deposited to SDO Jamshedpur.
Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC consealed conduit of 20mm bore with accessories in wall/roof/floor etc, and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 15 amp socket outlet controlled by one switch on independent board incl 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board.
Supplying and fixing switch socket combination two in one 5 and 15 Amps multipurpose flush type universal 240Volts.
S & F GI pipe 15 mm bore medium grade complete with all fitting like bend, elbows ,sockets ,union ,tees, nipple/long thread etc complete all as specified and directed.
S&F in 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, for following bore dia:Make-Shakti/Scud, for the following bore dia, complete all as specified and directed.
Taking down window/split type AC capacity 1.5 ton for dismantling / taking out cut /uncut compressor unit and taking out the same for replacement, complete all as specified and directed.
Supply and fixing of sealed compressor any type/Make of 1.5 ton capacity (As taken out vide srl item No. 1 above) fixed with all accessories etc, complete all as specified and directed. (Make-Existing Brand/ LG/ Voltas/Bluestar)
S&F of sealed compressor any type/Make of 2 ton capacity (As taken out vide srl item No. 1 above ) fixed with all accessories etc. complete including testing all as specified and directed for AC & Deep Freezer. Make-Existing Brand/ LG/ Voltas/Bluestar
Supply and charging of refrigerant gas R-22/R-12 ecofreindly for air conditioner, complete all as specified and directed.
Supply and charging of refrigerant gas R-134a for refigerator, deep freezer and water cooler
S&F starting capacitor of capacity 100 -150 MFD (Make-Existing Brand/ LG/ Voltas/Bluestar)
S&F running capacitor of capacity 6-36 MFD Make- (Make-Existing Brand/ LG/ Voltas/Bluestar)
S&F running capacitor of capacity 45 MFD. Make-As per sample
S&F relay for window type AC/Split type AC of capacity 1.5 TR (Make-Existing Brand/ LG/ Voltas/Bluestar)
S&F of over load protection assembly, type 1622 for window type AC/Split type AC Make-Existing Brand/ LG/ Voltas/Bluestar)
M&L for Air filter suitable for split type AC, complete all as specified and directed. Make-Existing Brand/ LG/ Voltas/Bluestar
S&F thermostat for window type AC /Split type AC of capacity 1.5 TR Make- Make-Existing Brand/ LG/ Voltas/Bluestar
M & L for Evaporator unit for split type AC of capacity 1.5/2 TR
S&F codeless control unit with PCB Kit suitable for split type AC 1.5/2TR capacity. Make-Existing Brand/ LG/ Voltas/Bluestar
S&F PVC insulated and sheathed cable 3 core, 4 sq mm copper conducter 1100 V grade. Make- Anchor/Havells/Polycab
Servicing of window/split type air conditioners 1.5/2 ton including checking all parts, cleaning the filters, tightining any loose parts and replacement of defective wiring kit, split pins, nuts bolts and washers, brazing, valve replacement, leak testing, temprature setting etc complete all as specified and directed at site Note- Servicing will be attended at site only
S&F for replacement of fan motor of required make and size of following capacity to suit the existing window/ split type AC including dismantling the unserviceable fan motor . Make-Existing Brand/ LG/ Voltas/Bluestar
M&L for rewinding fan motor of following capacity of any make and size to suit the existing window / split type AC.
Supply and fixing of sealed compressor for 40 Ltr /hr capacity water cooler fixed all as specified and directed. Make Existing Brand/ LG/ Voltas/Bluestar
All as per item No 66 above but for 150 Ltr/hrs
S&F in replacement of electric blower motor ,single phase,230 volts of water cooler, 40Ltrs /hr including testing, complete all as specified and directed. Make-Existing Brand/ LG/ Voltas/Bluestar
S&F relay for water cooler of capacity 40 ltrs/hr type 412L. Make-Existing Brand/ LG/ Voltas/Bluestar
S&F relay for water cooler of capacity 150 ltrs/hr type 412L Make-Existing Brand/ LG/ Voltas/Bluestar
M&L for rewinding fan motor of existing water cooler of capacity 40/80 Ltr.
S&F thermostat for water cooler of capacity 40/80 ltrs/hr Make-Existing Brand/ LG/ Voltas/Bluestar
S&F door rubber inner liner (magnetic)suitable for water cooler capacity 40 Ltrs
S&F door rubber inner liner suitable for water cooler capacity 40/80 Ltrs/hrs.
Servicing of water cooler any capacity including checking all parts, cleaning the water tank, tightining any loose parts and replacement of defective wiring kit, split pins, nuts bolts and washers etc, complete all as specified and directed. Note- All facility water cooler for repair will be attended at site only
Taking down cut/uncut unserviceable compressor unit from Refrigerator capacity 120 to 320 Ltr capacity and taking out the same for replacement, complete all as specified and directed. Make-Existing Brand/Kelvin/LG/Whirpool
S&F sealed compressor for 120 to 320 Ltr /hr capacity Refrigerator fixed complete all as specified and directed. Make-Existing Brand/Kelvin/LG/Whirpool
S&F starting capacitor of capacity 40/60 MFD Make-Usha/Asian/EPCOS
Balaji Construction And Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .