At MLG- Modernization of Gati shakti office/MLG Ground floor at GM/NFR complex of N F Railway.

A-Execution of works as per Annexure-I (Masonry work, Clading work,

B-Execution of works as per Annexure-II (Finishing, Repairs to Building,

C-Execution of works as per Annexure-III (Aluminum work , Structural

D-Execution of works as per Annexure-IV (Ply & Toughened glass)

E-Execution of works as per Annexure-V (Electrical works items)

F-Execution of works as per Annexure-VI (DSR Horticulture &

G-Execution of works as per Annexure-VII (Railnet connectivity at Gati

H-Execution of works as per Annexure-VIII (Telephone connectivity at

Item- 1 Annexure-I

S No. Item No Description of Item Unit Qty Rate Amount

6.0 MASONRY WORK

6.12S HALF BRICK MASONRY

Half brick masonry with common burnt clay

F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above

plinth level up to floor V level.

6.26S EXPOSED BRICK WALL

Brick work with common burnt clay selected

F.P.S. (non modular) bricks of class

designation 7.5 in exposed brick work

6.26 including making horizontal and vertical

grooves 10 mm wide 12 mm deep complete

in cement mortar 1:6 (1 cement : 6 coarse

8.0 CLADDING WORK

8.1S General

Providing and fixing 18 mm thick gang saw

cut, mirror polished, premoulded and

prepolished, machine cut for kitchen

platforms, vanity counters, window sills,

facias and similar locations of required size,

approved shade, colour and texture laid over

20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high

gloss finish etc. complete at all levels

Granite stone slab colour black, Cherry/Ruby

NFR HQ-ENGG/N F RLY

8.20S STONE WORK DRY CLADDING

Providing and fixing plywood 4 mm thick, one

side decorative veneer conforming to IS:

8.28 1328 (type-1), for plain lining / cladding with

necessary screws, including priming coat on

unexposed surface with :

8.28.1 Decorative veneer facings of approved Sqm 300 1946.25 583875

8.31 Providing and fixing Ist quality ceramic Sqm 30 1267.95 38038.5

glazed wall tiles conforming to IS: 15622

(thickness to be specified by the

manufacturer), of approved make, in all

colours, shades except burgundy, bottle

green, black of any size as approved by

5 Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per

sqm, including pointing in white cement

mixed with pigment of matching shade

9.0 WOOD AND P.V.C. WORK

9.1S FRAMES AND TRUSSES

Providing and fixing ISI marked flush door

shutters conforming to IS : 2202 (Part I)

decorative type, core of block board

9.20 construction with frame of 1st class hard

wood and well matched teak 3 ply veneering

with vertical grains or cross bands and face

veneers on both faces of shutters.

9.20.2 30 mm thick including ISI marked Stainless Sqm 20 3167.95 63359

Steel butt hinges with necessary screws

9.105S GYPSUM BOARD PARTITIONS

Providing & Fixing decorative high pressure

laminated sheet of plain / wood grain in gloss

/ matt/ suede finish with high density

9.127 protective surface layer and reverse side of

adhesive bonding quality conforming to IS :

2046 Type S, including cost of adhesive of

approved quality.

NFR HQ-ENGG/N F RLY

Providing and fixing factory made uPVC

glazed/wire mesh windows/ doors comprising

of lead free uPVC multi-chambered frame,

sash and mullion/coupler (where ever

required) extruded profiles having minimum

wall thickness of 1.70 mm for Series R1 and

R2 profiles and 2.10 mm for Series R3 and

R4 profiles conforming to EN: 12608 in any

shape, colour and design duly reinforced with

galvanized mild steel section made of

required shape & size as per CPWD

Specification, uPVC extruded glazing beads,

interlocks and Inline sash adaptor (where

ever required) of appropriate dimension,

EPDM gasket, hardware, SS 304 grade

fasteners of minimum 8 mm dia with

countersunk head, comprising of matching

polyamide PA6 grade sleeve for fixing frame

to finished wall as per IS 1367 : Part 1 to 14,

plastic packers, plastic caps and necessary

stainless steel screws etc. Profile of frame,

sash & mullion (if required) shall be mitred

cut and fusion welded/mechanically jointed

duly sealed at all corners, including drilling of

holes for fixing hardware and drainage of

water etc. After fixing frame the gap

between frame and adjacent finished wall

shall be filled with weather proof silicon

sealant over backer rod of approved size and

quality, all complete as per approved

drawing conforming to CPWD specification &

direction of Engineer-in-Charge. Section of

steel reinforcement and cross sections of

uPVC profiles to be as per design approved

by Engineer-in-Charge. Wire mesh / Glazing

of plain/ toughened/ laminated/ double glass

unit with / without high performance coatings

as per design requirements and conforming

to IS: 3548 & IS: 16231 shall be paid

Three track three panels sliding window with

two glazed & one wire mesh panels with

Aluminium channel for roller track, wool pile,

nylon rollers with SS 304 body.

above) x (45 mm & above) & both glazed

and fly screen sash (44 mm & above) x (55

8 mm & above) with zinc alloy (zamak) powder

coated handle on every glazed panel along

with multipoint locking system. (Height

9.169 Providing and fixing 19 mm thick both side Sqm 300 2593.15 777945

balancing lamination factory pressed BWP

grade marine ply as per IS 710 of approved

9 brand boxes, shelves, racks, almirah,

cupboard and drawer etc. including

necessary nails, screws etc. complete as per

direction of Engineer-in-charge.

11.0 FLOORING

11.41S VITRIFIED FLOOR TILES

NFR HQ-ENGG/N F RLY

Providing and laying Vitrified tiles in floor in

different sizes (thickness to be specified by

the manufacturer) with water absorption less

than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick

cement mortar 1:4 (1 cement: 4 coarse sand)

jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white

cement and matching pigments etc. The tiles

must be cut with the zero chipping diamond

cutter only . Laying of tiles will be done with

the notch trowel, plier, wedge, clips of

required thickness, leveling system and

rubber mallet for placing the tiles gently and

Double charge vitrified tile polished finish of

Providing and laying Polished Granite stone

flooring in required design and patterns, in

linear as well as curvilinear portions of the

building all complete as per the architectural

drawings with 18 mm thick stone slab over

20 mm (average) thick base of cement

11.56 mortar 1:4 (1 cement : 4 coarse sand) laid

and jointed with cement slurry and pointing

with white cement slurry admixed with

pigment of matching shade including rubbing

, curing and polishing etc. all complete as

specified and as directed by the Engineer-in-

11.56.1 Polished Granite stone slab colour of Black, Sqm 217.5 4481.3 974682.75

Cherry/Ruby Red or equivalent

12.0 ROOFING

12.37S RAIN WATER SPOUT AND PIPE

Providing and fixing on wall face

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal

expansion, (i) Single socketed pipes.

Providing and fixing on wall face

unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain

12.42 water pipes conforming to IS : 13592 Type A,

including jointing with seal ring conforming

to IS : 5382, leaving 10 mm gap for thermal

12.42.5 Bend 87.5 degree

NFR HQ-ENGG/N F RLY

Providing and fixing tiled false ceiling of

specified materials of size 595x595 mm in

true horizontal level, suspended on

interlocking metal grid of hot dipped

galvanized steel sections ( galvanized @ 120

grams/ sqm, both side inclusive) consisting of

main "T" runner with suitably spaced joints to

get required length and of size 24x38 mm

made from 0.30 mm thick (minimum) sheet,

spaced at 1200 mm center to center and

cross "T" of size 24x25 mm made of 0.30

mm thick (minimum) sheet, 1200 mm long

spaced between main "T" at 600 mm center

to center to form a grid of 1200x600 mm and

secondary cross "T" of length 600 mm and

size 24x25 mm made of 0.30 mm thick

(minimum) sheet to be interlocked at middle

12.52 of the 1200x600 mm panel to form grids of

600x600 mm and wall angle of size

24x24x0.3 mm and laying false ceiling tiles

of approved texture in the grid including,

required cutting/making, opening for services

like diffusers, grills, light fittings, fixtures,

smoke detectors etc. Main "T" runners to be

suspended from ceiling using GI slotted

cleats of size 27 x 37 x 25 x1.6 mm fixed to

ceiling with 12.5 mm dia and 50 mm long

dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x

30 x 0.8 mm spaced at 1200 mm center to

center along main T, bottom exposed width

of 24 mm of all T-sections shall be pre-

painted with polyester paint, all complete for

all heights as per specifications, drawings

and as directed by Engineer-in-charge.

12.52.3 12.5 mm thick square edge PVC Laminated Sqm 270 2215.15 598090.5

Gypsum Tile of size 595x595 mm, made of

Gypsum plasterboard, manufactured from

natural gypsum as per IS 2095 part I and

laminated with white 0.16 mm thick fire

retardant PVC film on the face side and 12

micron metalized polyester on the back side

with all edges sealed with the face side PVC

film which goes around and wraps the edges

and is bonded to the edges and the back side

metalized polyester film so as to make the

tile a completely sealed unit.

Schedule B-Execution of works as per Annexure-II (Finishing, Repairs to Building, Sanitary

installation, Dismantling & Water supply)

Item- 2 Annexure-II

S No. Item No Description of Item Unit Qty Rate Amount

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

15 mm cement plaster on the rough side of

single or half brick wall of mix :

13.20S PEBBLE DASH PLASTER

13.26 Providing and applying plaster of paris putty Sqm 400 262.7 105080

of 2 mm thickness over plastered surface to

prepare the surface even and smooth

13.37S INTERIOR FINISHING

NFR HQ-ENGG/N F RLY

Distempering with 1st quality acrylic

distemper (ready mixed) having VOC content

less than 50 gram/litre, of approved

manufacturer and of required shade and

colour all complete to achieve even shade

13.41.1 New work (two or more coats) over and Sqm 300 185.65 55695

including water thinnable priming coat with

cement primer having VOC content less than

13.44S EXTERIOR FINISHING

Finishing walls with water proofing cement

paint of required shade :

13.44.1 New work (Two or more coats applied @ 3.84 Sqm 100 116.9 11690

Finishing with Deluxe Multi surface paint

13.48 system for interiors and exteriors using

Primer as per manufacturers specifications :

13.48.3 Painting Steel work with Deluxe Multi Surface Sqm 50 170.7 8535

Paint to give an even shade. Two or more

6 coat applied @ 0.90 ltr/10 sqm over an under

coat of primer applied @ 0.80 ltr/10 sqm of

approved brand and manufacture

14.0 REPAIRS TO BUILDING

14.1S General

Repairs to plaster of thickness 12 mm to 20

mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper

shape, raking out joints and preparing and

plastering the surface of the walls complete,

including disposal of rubbish to the dumping

ground, all complete as per direction of

Engineer-in-Charge.

15.0 DISMANTLING AND DEMOLISHING

15.1S General

15.3 Demolishing R.C.C. work manually/ by cum 5 3551.25 17756.25

mechanical means including stacking of steel

8 bars and disposal of unserviceable material

within 50 metres lead as per direction of

Engineer - in- charge.

15.5 Extra for cutting reinforcement bars Sqm 50 1147.2 57360

manually/ by mechanical means in R.C.C. or

9 R.B. work (Payment shall be made on the

cross sectional area of R.C.C. or R.B. work) as

per direction of Engineer-in-charge.

Demolishing brick work manually/ by

mechanical means including stacking of

15.7 serviceable material and disposal of

unserviceable material within 50 metres lead

as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory

windows (steel or wood) shutter including

15.12 chowkhats, architrave, holdfasts etc.

complete and stacking within 50 metres lead

Dismantling wooden boardings in lining of

walls and partitions, excluding supporting

members but including stacking within 50

NFR HQ-ENGG/N F RLY

15.57 Dismantling aluminium/ Gypsum partitions, Sqm 99.95 56.35 5632.18

doors, windows, fixed glazing and false

ceiling including disposal of unserviceable

material and stacking of serviceable material

with in 50 meters lead as directed by

Engineer-in-charge.

17.0 SANITARY INSTALLATIONS

17.1S General

Providing and fixing water closet squatting

pan (Indian type W.C. pan ) with 100 mm

sand cast Iron P or S trap, 10 litre low level

white P.V.C. flushing cistern, including flush

17.1 pipe, with manually controlled device (handle

lever) conforming to IS : 7231,with all fittings

and fixtures complete, including cutting and

making good the walls and floors wherever

17.1.1 White Vitreous china Orissa pattern W.C. pan Each 2 6767.4 13534.8

15 of size 580x440 mm with integral type foot

Providing and fixing white vitreous china flat

back half stall urinal of size 580x380x350

mm with white PVC automatic flushing

cistern, with fittings, standard size C.P. brass

flush pipe, spreaders with unions and clamps

(all in C.P. brass) with waste fitting as per IS :

2556, C.I. trap with outlet grating and other

couplings in C.P. brass, including painting of

fittings and cutting and making good the

walls and floors wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. Each 2 12071.75 24143.5

automatic flushing cistern

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32

mm C.P. brass waste of standard pattern,

including painting of fittings and brackets,

cutting and making good the walls wherever

17.7.1 White Vitreous China Wash basin size Each 5 2648.85 13244.25

17 630x450 mm with a pair of 15 mm C.P. brass

17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet Each 5 349.15 1745.75

with flexible tube upto 1 metre long with S.S.

18 triangular plate to European type W.C. of

quality and make as approved by Engineer -

Providing and fixing P.V.C. waste pipe for

17.28 sink or wash basin including P.V.C. waste

fittings complete.

17.28.2 Flexible pipe

Providing and fixing vitreous china dual

purpose closet suitable for use as squatting

pan or European type water closet (Anglo

Indian W.C pan) with seat & lid fixed with C.P.

brass hinges and rubber buffers, 10 litre low

level flushing cistern with fitting and

17.68 brackets, 40 mm flush bend, 20 mm over

flow pipe, with specials of standard make

and mosquito proof coupling of approved

municipal design complete, including

painting of fittings and brackets, cutting and

making good the walls and floors wherever

NFR HQ-ENGG/N F RLY

17.68.1 White vitreous china dual purpose WC pan Each 3 11847.65 35542.95

with white solid plastic seat and lid with

white vitreous china flushing cistern and C.P.

17.71 Providing and fixing PTMT liquid soap Each 5 168.35 841.75

container 109 mm wide, 125 mm high and

112 mm distance from wall of standard

shape with bracket of the same materials

with snap fittings of approved quality and

colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete

with brackets fixed to wooden cleats with CP

brass screws with concealed fittings

arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of Each 5 708.95 3544.75

22 645 mm, width 78 mm and effective height

of 88 mm, weighing not less than 190 gms.

17.74 Providing and fixing PTMT shelf 440 mm long, Each 5 713.2 3566

124 mm width and 36 mm height of

approved quality and colour, weighing not

less than 300 gms.

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, and all

CPVC plain & brass threaded fittings,

including fixing the pipe with clamps at 1.00

m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement

and testing of joints complete as per

direction of Engineer in Charge. ( Internal

work - Exposed on wall )

Providing and fixing G.I. pipes complete with

18.12 G.I. fittings including trenching and refilling

etc. External work

18.15S BRASS FITTINGS

Providing and fixing brass bib cock of

approved quality :

Providing and fixing brass stop cock of

approved quality :

C.I. SLUICE VALVES/ FIRE HYDRANTS &

18.48 Providing and placing on terrace (at all floor Per Litre 10000 11 110000

levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable

28 locking arrangement and making necessary

holes for inlet, outlet and overflow pipes but

without fittings and the base support for

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass long body bib

cock of approved quality conforming to IS

standards and weighing not less than 690

18.54S PTMT FITTINGS

Providing and fixing PTMT pillar cock of

approved quality and colour.

weighing not less than 110 gms

NFR HQ-ENGG/N F RLY

Providing and fixing PTMT, push cock of

approved quality and colour.

18.57.1 15 mm nominal bore, 98 mm long, weighing Each 5 112.8 564

not less than 75 gms

Schedule C-Execution of works as per Annexure-III (Aluminum work , Structural glazing and glass

Item- 3 Annexure-III

S No. Item No Description of Item Unit Qty Rate Amount

21.0 ALUMINIUM WORK

21.1S General

21.18 Providing and fixing 12 mm thick frameless Sqm 45 5325.9 239665.5

toughened glass door shutter of approved

brand and manufacture, including providing

and fixing top & bottom pivot & double acting

hydraulic floor spring type fixing

arrangement and making necessary holes

etc. for fixing required door fittings, all

complete as per direction of Engineer-in-

charge (Door handle, lock and stopper etc. to

paid separately)

STRUCTURAL GLAZING ALUMINIUM

COMPOSITE PANEL

25.1S General

25.8 Design supply & installation of suspended Sqm 350 9502.35 3325822.5

Spider Glazing system designed to withstand

the wind pressure as per IS 875 (Part-III). The

Suspended System held with Spider Fittings

of SS-316 Grade Steel of approved

manufacturer with glass panel having 12 mm

thick clear toughened glass held together

with SS- 316 Grade Stainless steel Spider &

bolt assembly with laminated glass fins 21

mm thick. The Glass fins and glass panel

assembly shall be connected to Slab/beams

by means of SS- 316 Grade stainless steel

brackets & Anchor bolts and at the bottom

using SS channel of 50x25x2 mm using

fastener & anchor bolts, non staining

weather sealants of approved make, Teflon/

nylon bushes and separators to prevent bi-

metallic contacts, all complete to perform as

per specification and approved drawings. The

complete system to be designed to

accommodate thermal expansion & seismic

movements etc. The joints between glass

panels (6 to 8 mm) and gaps at the

perimeter & in U channel of the assembly to

be filled with non staining weather sealant,

so as to make the entire system fully water

proof & dust proof. The rate shall include all

design, Engineering and shop drawing

including approval from structural designer,

labour, T& P,scaffolding, other incidental

charges including wastage, enabling

temporary services all fitting fixers nut bolts,

washer, Buffer plates, fastener, anchors,SS

channel laminated glass etc. all complete.

For the purpose of payment, actual elevation

area of Glazing including thickness of joints

and the portion of Glass panel inside the SS

channel shall be measured.

Schedule Schedule D-Execution of works as per Annexure-IV (Ply & Toughened glass)

Item- 4 Annexure-IV (NS Items)

S No. Item No Description of Item Unit Qty Rate Amount

NFR HQ-ENGG/N F RLY

1 1 12 mm thick marine plywood conforming to Sqm 600.00 850.75 510450.00

Schedule Schedule E-Execution of works as per Annexure-V (Electrical works items)

Item- 5 Annexure-V (NS Items)

S No. Item No Description of Item Unit Qty Rate Amount

1 1 a) Supply, wiring, testing & commissioning of Numbers 200.00 734.00 146800.00

concealed point wiring by FR-LSH PVC

insulated and unsheathed 1.5 sq mm, single

core multi strand copper wire with earth

continuity wire by PVC insulated and

unsheathed 1 sq mm , single core multi

strand copper wire concealed on wall

through PVC rigid conduit pipe/polythene

pipe of dia not less than 20 mm dia heavy

duty including all types of joints and bends

as required, complete with 6 amps flush type

controlling modular switch to be mounted on

modular GI inner plate and modular

mounting frame of suitable module as per

requirement complete to be concealed in

wall as per instruction of Engineer Incharge

at site. Existing wall should be cut and re-

mended to original finish by contractor's own

material. a) FL point/LED tube point/Mirror

light point with C/rose

2 2 b) Fan point with c/rose and 5 step fan Numbers 24.00 1335.00 32040.00

5 5 e) Emergency (inverter) light point with angle Numbers 10.00 648.00 6480.00

6 6 f) Plug point 6 amps on board complete Numbers 50.00 332.00 16600.00

7 7 h) Fixing, testing & commissioning of ceiling Numbers 24.00 42.00 1008.00

fan with supply & fixing of MS clamp with

hook,nut,bolt,washer etc. (Fan will be

supplied by Railway)

8 8 i) Supply and testing of wall mounted bracket Numbers 10.00 1840.00 18400.00

fan 400 mm sweep complete with all

accessories to be fixed on wall by suitable

fixing arrangement including connection by 2

core, 1.5 sqmm PVC insulated and FR PVC

Round Sheathed, Copper Conductor (flexible)

industrial cable

9 9 Supply, fixing, connection & testing of indoor Numbers 10.00 900.00 9000.00

LED tube batten with 20 watt LED T8 tubular

lamp with extuded aluminium body and PC

diffuser complete with inbuilt driver (System

wattage-20 Watt, System efficacy> 105

lm/W, Power factor 0.90) with suitable fixing

arrangement as per instruction of Engineer

incharge at site.

10 10 Supply, installation, testing & commissioning Numbers 10.00 2600.00 26000.00

of 300 mm sweep (metallic) heavy duty

exhaust fan, 1400 RPM complete with fixing

on wall by suitable size bolts & nuts grouted

on wall as per instruction of Engineer

Incharge at Site.

11 11 Supply, installation, testing & commissioning Numbers 32.00 2113.00 67616.00

of Surface/Recessed LED luminaire with slim

line CRCA sheet metal body, square type,

(System wattage-18 Watt, Nominal system

efficacy 100 lm/watt) suitable for 600 x 600

mm modular ceiling as per instruction of

Engineer incharge at site.

NFR HQ-ENGG/N F RLY

12 12 Supply, wiring, testing & commissioning of Numbers 20.00 787.00 15740.00

concealed 6/16 amps power plug point on

separate board complete with modular 16

amps switch (with indicator) and 6/16 amps 3

pin combined shuttered socket to be

mounted on modular GI inner plate 4M or

suitable size with modular mounting frame to

be concealed in wall (Wiring measurement

from Sr. No-11)

13 13 Supply, wiring, testing & commissioning of Numbers 10.00 679.00 6790.00

concealed plug point on separate board

complete with 2 x 6 Amp modular socket and

6/10 amps modular switch to be mounted on

modular GI inner plate 6M and 6M modular

mounting frame with GI box to be concealed

in wall as per instruction of Engineer

Incharge at site. Existing wall should be cut

and re- finish.

14 14 Supply, installation, testing & commissioning Numbers 2.00 10610.00 21220.00

of 120 watt LED flood light luminaires

complete with pressure die cast aluminium

housing, IP 65, Luminous efficacy 100

lm/watt with heat sink feature, surge

protection etc including wire connection as

per instruction of Engineer incharge at site.

15 15 Supply, installation, testing & commissioning Numbers 13.00 46050.00 598650.00

of Inverter Split Air Conditioners 1.5 Ton,

(BEE star raying-5 star, Coil material-Copper,

Echo-friendly refrigerant, Nominal cooling

capacity in Ton / (kcal/hr)-1.5 Ton / 4500

kcal/hr) with all accessories as per OEM

suitable for operation on 230V AC ,single

phase, 50 Hz as per instruction of Engineer

incharge at site. Re-mending work should be

done after installation of RAC. (with 1 pair

outdoor wall stand)

16 16 Supply, wiring, testing & commissioning of Numbers 100.00 648.00 64800.00

concealed point wiring by FR PVC insulated

and unsheathed 1.5 sq mm, single core multi

strand copper wire with earth continuity wire

by PVC insulated and unsheathed 1 sq mm ,

single core multi strand copper wire

concealed on wall through PVC rigid conduit

pipe of dia not less than 20 mm dia heavy

duty including all types of joints and bends

as required, complete with 6 amps flush type

controlling modular switch to be mounted on

modular GI inner plate and modular

mounting frame of suitable module as per

requirement complete to be concealed in

wall as per instruction of Engineer Incharge

at site. Existing wall should be cut and re-

mended to original finish by contractor's own

material.a)Inverter Point

17 17 Supply & wiring by 6 sq mm, Single Core FR- Metre 200.00 76.00 15200.00

LSH PVC Insulated Industrial Grade Copper

Conductor (Unsheathed) Flexible Cables,

1100 Volts Conforming to IS: 694 to be drawn

through double locked PVC casing capping of

not less than 19 mm wide & 0.85 mm thick

along with 1 sq mm single core FR PVC

insulated and unsheathed copper wire for

earth continuity as per instruction of

Engineer Incharge at Site.

NFR HQ-ENGG/N F RLY

18 18 Supply & wiring by 2.5 sq mm, Single Core Metre 1000.00 47.00 47000.00

FR-LSH PVC Insulated Industrial Grade

Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts Conforming to IS: 694 to

be drawn through double locked PVC casing

capping of not less than 19 mm wide & 0.85

mm thick along with 1 sq mm single core FR

PVC insulated and unsheathed copper wire

for earth continuity as per instruction of

Engineer Incharge at Site.

19 19 Wiring for light point/ fan point/ exhaust fan Numbers 1467.00 100.00 146700.00

point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core

cable in surface / recessed medium class PVC

conduit, with modular switch, modular plate,

suitable Gl box and earthing the point with

1.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Schedule Schedule F-Execution of works as per Annexure-VI (DSR Horticulture & Landscaping Items- 2020)

Item- 6 Annexure-VI

S No. Item No Description of Item Unit Qty Rate Amount

3.0 FOLIAGE AND SHADE LOVING PLANTS

3.60 Providing and displaying of Money Broad Each 2 246 492

Leaves mounted on moss stick 1.20 m ht., 5

to 6 s in each pot, well developed with full of

1 fresh & healthy leaves in size of 25 cm Top

dia x 18 cm Bottom dia x 25 cm

Perpendicular height Earthen pot/Plastic pot

& as per direction of the officer-in-charge.

3.64 Providing and displaying of Philodendron Each 5 430.5 2152.5

Envy mounted on moss stick 90 cm ht., well

2 developed with full of fresh & healthy leaves

in 30 cm size of Earthen pot/Plastic pot & as

per direction of the officer-in-charge.

4.0 SEASONAL PLANTS

4.1S Winter Seasonal plants

4.37 Providing and Displaying Marigold jaffri Each 5 150.7 753.5

orange/yellow/Russet colour well developed

with fresh & healthy foliage with 40 to 50

flowers in bloom specimen plant 60 to 75 cm

ht in 25 cm Earthen Pot/Plastic Pot and as per

direction of the officer-in-charge.

4.40 Providing and Displaying Marigold(Tagetes) Each 5 64.6 323

inca hybrid different colour having 30 cm and

above ht., with 6 to 8 flowers in bloom &

blooming condition, well developed pot

should be fully covered with fresh and

healthy, foliage and flowers in 20 cm Earthen

Pot/Plastic Pot and as per direction of the

officer-in-charge.

4.65 Providing and Displaying Star of Bethlehem Each 5 344.4 1722

(Chinchi - Rinchi), 5 to 6 plant in each Pot full

5 bloom, with fresh and healthy foliage flower

in 25 cm Earthen Pot/Plastic Pot and as per

direction of the officer-in-charge.

4.69 Providing and Displaying Tulip Dutch hybrid Each 4 183.5 734

variety (3 in one) in each pot in full bloom

6 fresh & bright in different colour well

developed in 25 cm Earthen Pot/Plastic Pot

and as per direction of the officer-in-charge.

4.90S ROSE PLANTS

NFR HQ-ENGG/N F RLY

4.92 Providing and Displaying Creeper Rose Each 5 75.85 379.25

variety 3 to 4 healthy branch 60 cm and

7 above ht. well developed with one and above

flowers in 25 cm Earthen Pot, as per direction

of the officer-in-charge.

4.93 Providing and Displaying Standard Rose (H.T. Each 5 150.7 753.5

variety) 3 to 4 healthy branch 90 cm and

8 above ht. well developed with one and above

flowers in 25 cm Earthen Pot, as per direction

of the officer-in-charge.

5.0 ORNAMENTAL PLANTS

5.24 Providing and Displaying Ficus Retusa topiary Each 5 2152.5 10762.5

well developed with fresh & healthy 5 to 6

9 big ball specific size and shape 180 to 210cm

ht in 40 cm Cement Pot as per direction of

the officer-in-charge.

5.25 Providing and Displaying Ficus reginold well Each 5 377.2 1886

developed fresh & healthy foliage 60 to 75

10 cm spread 105 to 120 cm ht., Bushy in 35 cm

Cement Pot as per direction of the officer-in-

5.29 Providing and Displaying Fishtail palm well Each 5 307.5 1537.5

developed with fresh & healthy foliage leaves

11 of ht 210 to 240cm Specimen in 35 cm

Cement Pot as per direction of the officer-in-

5.30 Providing and Displaying Foxtail palm well Each 5 1183.9 5919.5

developed with fresh & healthy foliage of ht.

210 to 240 cm in big 40 cm Cement Pot as

per direction of the officer-in-charge.

5.40 Providing and Displaying Topiary of Ficus Each 5 1127.5 5637.5

Panda well developed with fresh & healthy

foliage with 3 to 4 Ball and 60 to 75 cm

spread each Ball, 135 to 150 cm ht., in 35 cm

Cement Tray /Cement Pot as per direction of

the officer-in-charge.

5.43 Providing and Displaying Travelers palm well Each 5 973.75 4868.75

developed with fresh & healthy leaves foliage

210 to 240 cm ht specimen in 40 cm Cement

Pot as per direction of the officer-in-charge.

Schedule G-Execution of works as per Annexure-VII (Railnet connectivity at Gati Shakti/MLG office

ground floor at GM/NFR Complex)

Item- 7 Annexure-VII (NS Items)

S No. Item No Description of Item Unit Qty Rate Amount

1 1 Supply of GPON ONT Device for End User Numbers 10.00 3479.00 34790.00

Premises having 1GE+1FE+ 1POTS+ WIFI AC

(Support 2.4Ghz and 5Ghz) and designed for

fulfilling FTTH. It should be fully compliant

with technical regulations such as

IEEE802.3ah and technical requirement of

GPON as per TS-1.

2 2 Supply of 6 core Optical Fiber Cable Metre 1000.00 27.00 27000.00

(Unarmoured) for end user connectivity from

splitter as per TS- 2.

3 3 Supply of SC to SC patch cord (Single mode) Numbers 20.00 249.00 4980.00

as per site requirement as per TS-3.

4 4 Supply of Cat-6 UTP cable roll/box of approx. Per Box 4.00 6735.00 26940.00

305 mtr as per TS-4.

5 5 Supply & Installation of Indoor Access point Numbers 3.00 27423.00 82269.00

with all accessories. Make & Model: Cambium

cn Pilot Indoor E400 dual-band/ Superior as

NFR HQ-ENGG/N F RLY

6 6 Concealed Wiring- Supply and fixing of 3/4" Metre 30.00 143.00 4290.00

dia Conduit pipe with its accessories, laying

/blowing of telecom wires in pipe/fixing of

mild steel box after cutting the

wall/roof/floor. This includes cutting of

wall/roof/floor by manually/cutting machine

approximately depth to set conduit pipe

below 1 cm minimum of surface level and

back filling, ramming, plastering and painting

of the wall/roof/floor to its original condition.

For this all consumables i.e. different types

Bends, Circular Junction box, couplers etc.

are to be supplied by contractor as per TS-6.

7 7 Supply of RJ45 connector as per TS-7. Numbers 50.00 5.00 250.00

8 8 Supply of Ethernet patch cord (2 Mtr long) as Numbers 10.00 146.00 1460.00

9 9 Supply of 16 ports Gigabit Unmanaged Numbers 2.00 4474.00 8948.00

Switch having Gigabit Ethernet speeds up to

1 Gigabit per second (Gbps) as per TS-9.

10 10 Supply, installation & fixing of 9U Rack with Numbers 2.00 7699.00 15398.00

power strip having 5 sockets of 6A capacity

each & one tray as per TS-10. Make:

Valrack/Netrack /Emerson.

11 11 Supply, installation, testing and Numbers 2.00 19124.00 38248.00

commissioning of 3KVA UPS as per TS-11.

12 12 Supply of Joint enclosure box for 6 core fibre Numbers 10.00 4498.00 44980.00

13 13 Supply & installation of Joint Closure Box (2 Numbers 20.00 439.00 8780.00

ports) for ONT with dust- proof device to

prevent dust from entering fiber optic panels

Schedule H-Execution of works as per Annexure-VIII (Telephone connectivity at Gati Shakti/MLG

office ground floor at GM/NFR Complex)

Item- 8 Annexure-VIII (NS Items)

S No. Item No Description of Item Unit Qty Rate Amount

1 1 Excavation of trench 1.2 mtr deep, 0.3 mtr Metre 170.00 76.00 12920.00

wide at the bottom along railway track/other

locations in all type of soils (except rocky

area), including clearing of bushes, trees,

temporary obstruction, bailing out water from

the trench etc. and refilling of the trench by

excavated soil and ramming after laying of

the required quantity of cables as per

instruction of Engineer at site as given in TS-

2 2 All works of excavation of cable trench 1.0 Metre 90.00 584.00 52560.00

Meter deep, 0.3 Meter wide on pucca

platform/ on Road for road crossing/track

crossing and restoration of the platform/Road

surface /Track to original condition with

contractor's material, after laying of GI/DWC

pipes supplied by contractor and then re-

filling the trench as per Technical

Specifications TS-2.

3 3 Supply of 50 pair 0.5mm dia of switch board Metre 90.00 338.00 30420.00

PVC indoor Copper conductor. Make: Delton/

Finolex/Havells as per TS-3.

4 4 Supply & laying of 10 pair PVC insulated Metre 500.00 79.00 39500.00

cable of Copper conductor, size 0.5mm dia.

as per TS-4. Make: Delton/ Finolex/Havells .

5 5 Supply & installation of Distribution box of 50 Numbers 5.00 4637.00 23185.00

pair capacity fitted with krone module of

disconnection type, Hansel make or similar

NFR HQ-ENGG/N F RLY

6 6 Supply of PVC conduit pipe/casing capping Metre 300.00 27.00 8100.00

superior quality with ISI mark (25mm or as

per site requirement) as per TS-6.

7 7 Supply of PVC conduit pipe/casing capping Metre 200.00 70.00 14000.00

superior quality with ISI mark 2 inch or as per

site requirement) as per TS- 7.

8 8 Laying of co-axial/CAT- 6/telephone cable Metre 500.00 31.00 15500.00

along with PVC conduits pipes/casing capping

9 9 Supply of PVC Box of 4x7x2 inch (Pack/Set of Set 10.00 169.00 1690.00

2 boxes) as per TS-9.

10 10 Supply of 1 inch dia PVC flexible conduit pipe Per Box 2.00 340.00 680.00

(Coil/BOX of 25 Mtr) as per TS-10.

11 11 Supply and installation of Glass tray as per Numbers 15.00 912.00 13680.00

12 12 Supply and installation of cable distribution Numbers 2.00 20456.00 40912.00

pillar complete with inside framework for

accommodating 400 Pair and supply of IDC

disconnection tool for IDC module for 200 as

13 13 Repair of Tadiran make 24 circuit Analog Numbers 1.00 13688.00 13688.00

extensions card 24 SLS of Flexicom 6000

system as per TS-13.

14 14 Supply, Installation, Testing & Commissioning Numbers 1.00 61360.00 61360.00

of EPABX System Configured for 24 Lines as

per TS-14. Make : Matrix or Similar.

15 15 Supply of Push button telephone instrument Numbers 15.00 1239.00 18585.00

single line with caller ID facility. Handsfree

with 10 one tuch Memory Buttons as per TS-

15. Make & Model: Beetel Model M59 or

16 16 Supply of 2 line handsfree telephone Numbers 5.00 3114.00 15570.00

Panasonic as per TS-16. Make -Model KX-

T2378 MXWD or superior

17 17 Supply of wall hanging telephone as per TS- Numbers 2.00 645.00 1290.00

17. Make & model: Beetel, B- 25 or Similar.

18 18 Supply of Desk Type Push Button CLI phone Numbers 15.00 3500.00 52500.00

as per TS-18. Make & Model Euroset 2025 C

19 19 Supply of Rosette Box with 2 port (Set/Pack Set 15.00 117.00 1755.00

of 2 nos) as per TS-19.

20 20 Supply of Rosette Box for single telephone Set 15.00 112.00 1680.00

port (Set/Pack of 2 rosettes) as per TS-20.

21 21 Supply, Installation and commissioning of Numbers 1.00 4130.00 4130.00

50+50 MDF+IDF both with KRONE Module for

all extension lines at Exchange side as per

22 22 Supply of Integrated Protection Module (IPM) Numbers 50.00 236.00 11800.00

23 23 Supply & installation of 2 KVA online UPS Numbers 1.00 58982.00 58982.00

with external SMF battery of 6 nos having

12V, 42AH capacity including battery rack as

per TS-23. Make: Luminous/APC/Microtek.

24 24 Supply, installation & fixing of 9U Rack with Numbers 1.00 7699.00 7699.00

power strip having 5 sockets of 6A capacity

each & one tray as per TS-24. Make:

Valrack/Netrack/ Emerson

25 25 Supply & installation of Chemical Earthing Numbers 1.00 22805.00 22805.00

forEquipment using Earthing Electrode, Back

Fill Compounds(BFC) GI Strip as per TS-25.

26 26 Supply & laying of 5 pair PVC insulated cable Metre 500.00 31.00 15500.00

of Copper conductor, size 0.5mm dia. as per

TS- 26. Make: Finolex or better.

27 27 Supply of PVC sleeve of size 1mm dia as per Metre 65.00 75.00 4875.00

NFR HQ-ENGG/N F RLY