Construction of 6 ACR Building at KGBV Bero Ranchi

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B)

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) :4 gradde stone aggregate 40 mm nominal size)

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-lll) :6 gradde stone aggregate 40 mm nominal size)

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-lll) :8 gradde stone aggregate 40 mm nominal size)

making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 agraded stone aggregate 20mm nominal size ) over 75mm thick bed of dry brick ballast 40mm nominal size , well rammed and consolidated and grouted with fine sand , including necessary excavation , levelling & dressing & finishing the top smooth.

providing and laying in position specified grade of reinforced cement concrete ,excluding the cost of centering ,shuttering, finishing and reinforcement - All work up plinth level. 1:1.5.3 (1 cement :1.5 coarse sand (zone-lll): 3 graded stone aggregate 20mmnominal size)

reinforced cement concrete work in walls (any thickness), including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers , abutments, posts and struts etc. above plinth level up to floor five level , excluding costo of centering, shuttering , finishing and reinforcement: 1:1:5:3 (1 cement :1.5 coarse sand(zone-lll) :3 graded stone aggregate 20mm nomimal size)

reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landing, balconies , shelves , chajjas , lintels , bands, plain windows sills, staircases and spiral stair cases above plinth level up to floor five level , excluding the cost of centering , shuttering , finishing and reinforcement, with 1:1:5:3 (1 cement :1.5 coarse sand (zone-lll) : 3 graded stone aggregate 20 mm nominal size )

Centring and shuttering icluding strutting propping etc and removal of form for foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral-staircases

Weather shade, chajjas, corbels etc including edges

Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 8mm (TMT,Coil Fe 500)

10mm (TMT,Coil Fe 500)

12mm (TMT,Coil Fe 500)

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)

Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l.

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6mm size graded stone chips and top layer 6 mm thick (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l

Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curring, taxes and royalty all complete as per building specification and direction of E/l.

Extra for providing and fixing 30x4mm glass strips in joints of flooring, complete job as per specifications and direction of E/l.

Extra for flooring work for each consecutive floor above first floor complete as per direction of E/l

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pum

ice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)

Providing 150mm. wide brick drain in cement mortar (1:6) with av. 125 mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Water proofing for Old and New Roof Slab Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with brush, roller or spray for water proofing coating as per manufacturer specifications with following steps (a)surface preparation-Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint/ coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete Ponding test to be done after plugging all outlets and to be checked from soffit to identify see page, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika India Pvt Ltd. MYK Schomberg Dr Fixit/Fosroc or equivalent Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150mm X 150 mm fillet of mortar (Cement sand 1:4) admixed with acrylic polymer of Sikal Fosroc MYK Schomberg/Dr Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry of acrylic polymer Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete (b)1st Coat Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller After 1st coat of application, 45 gsm of Fibre glass cloth to lay when the first layer is still green 1st coat should be applied @150 kg/Sgm/coat For the purpose of measurement the entire treated surface will be measured." (c) 2nd Coat-To apply the 2nd coat of two component acrylic modified, ready to use, flexible cementitious material right angle to the 1st coat over the glass fibre laid surface 2nd coat should be applied @0.7 kg/ Sqmt/coat For the purpose of measurement the entire treated surface will be measured" After three days of drying the 2nd coat, the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C. The waterproof coating to be protected from damage before screed over it Waterproofing Brand. Sika Topseal 109hi Fosroc Brushbond RFX/Dr Fixit Pidiffin 2K/MYK Aquafin TG Product Performance Chemical Base Part A Acrylic copolymer, Part B: Specially graded cementitious powder Density 1.6 kg/l (mixed density) at +27°C Tensile Strength 2 N/mm2 after 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Strength -2 N/mm2 (concrete failure) (According to ISO 4624). Slant-Shear Bond Strength 4 N/mm2 (According to FIP 5.15) Elongation at Break -35% without Fibre Cloth and 20% with Fibre Cloth (According to ASTM D 2370) (d) Protection of treated surface with PCC :- The treated surface should be covered with 25mm/50mm PCC of M-20 grade(1:1:5:3) with proper slope (1:120) towards the rain outlets in alternatepanels of 2 mt x 2mt keeping 6 mm gap between the panel joint Integral water proofing admixture conforming to IS 2645 @ of 100 ml per bag of of cement to be added in the screed concrete (paid separately for this items) Al corners shall be chamfered with 150mm X 150 mm fillet The rainwater outlets shall be just leveled with the screed concrete to ensure smooth discharge of water the peripheral gaps between pvc pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of Sika India " Pvt. Ltd. MYK Schomberg Dr Fixit/Fosroc For the purpose of measurement the entire treated surface will be measured.(e) Groove of PCC surface should be filled with Polysulphide Sealant (Paid Separately) Brand Sika India Pvt.Ltd. MYK Schomberg Dr Fixit/Fosroc. Warranty for five years.

Covering of treated surface with PCC Providing 50 mm thick Cement Concrete M20(1153) maintaining slope in alternate 2 mt x 2 mit pan with aaproved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of FM 2.5 to 3 including screening shuttering and mixingcement concrete in mixer with admixture of integral waterproofing and placing in position striking curing taxexand royality all complete as per building specifiction and directions of E/ Panets that has been left should be casted next day. There should be 6 mm gap between Panels Brand-Sika-Plastocrate plus, MYK proof WP 10.Fosroc Conplast X 4211C. Dr.fixit Pidiproof LW or Equivalent

Providing and filling of 6 mm thick Groove between 50 mm PCC Panels with 6 mm thick 25 mm deep thermocol strip and filling the rest 25 mm with Polysulphide Sealant (Poring Grade)as per drawings and technical specifications and direction of E in Charge. (with 18% GST) Brand Sika Polysulphide. Fosroc-Thioflex 600,Dr. Fixit Pidi Seal PS(42P).MYK Seal PS or Euivalent

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm Coupler 110 mm

Bend 87.5° 110 mm bend

Shoe (Plain) 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 1.5m

m cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.

Carraige of Materials Bricks - 8km (1k + 7p)

Sand - 30km

Chips - 20km

Metal - 20km

FlyAsh brick - 15km

Carraige of Earth- 3km

Providing and fixing brass/C.I. Stop cock of approved quality all complete as per specification and direction of E/I. (A) BRASS STOP COCK (a) 15 mm dia

Providing and fixing brass/C.I. Stop cock of approved quality all complete as per specification and direction of E/I. (A) BRASS STOP COCK (b) 20 mm dia

Providing and fixing 15mm size C.P brass pillar rock (Weight not less than 350gms). C.I body brass spindle pillar cock of approved quality as per specification and direction of Engineer-In-Charge. C.I body brass spindle

Providing and fixing Gun metal full way valve of approved quality, all complete as per specification and direction of E/I. 25mm dia and weight not less than 500gms.

32mm dia and weight not less than 700gms.

cutting chajja or cornice for laying G.I pipe and restoring the same with R.C.C(1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of Engineer-In-charge.

Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/I. (a) 125mm thick wall

(b) 250mm thick wall

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. 450*125mm glass shelf complete

Mirrors of 6mm thick plate glass bevelled edge mirror including C.P brass revolving fittings 3mm ply wood board and C.P hinges to fix with mirror. 450,, * 300mm size

C.P brass dish container medium quality with screw and hinges etc.

Supplying fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S approved make with 100mm H.C.I 'p' trap 15 litres C.I pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings, C.I or C.C brackets 32mm alkathene / P.V.C telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of vitrous white glazed earthenware ware footrest to be fixed in floor 15mm C.I body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580 mm long With 10 lit. low level PVC cistern

Supplying fitting and fixing 40mm high vitreous white glazed earthen E.W.C with 'p' trap of parry hindustan or any other approved I.S.S make including supplying and fixing 15 litres C.I mosquito proof low down flushing cistern of approved make with complete fittings with C.I handle and R.S or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C alkathene pipe 45cm long with brass coupling at both ends and white/black plastic solid state seal and lead of commander cuckoo or ther I.S.S make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I. (i) With 'P' trap (b) 12.5 lit. low level PVC cistern

Supplying fitting and fixing flat back or angular lipped front vitreous white glazed earthen ware urinal of 'Hindustan Parry' or any other approved I.S.S make with 5 liters capacity C.I automatic fulsing cistern of reliance for any other I.S.S approved make with all fitting with C.I or R.S brackets standard size G.I flush pipe with fitting clamps 15mm C.I body brass spindle stop cock of approved quality weight not less than 400grams, 15mm P.V.C/Alkthene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor making good the same etc. all complete as per specification and direction of E/I. (a) Flat back or standing corner (600mm*350mm)

Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved make supprted on painted C.I or R.S brackets 32mm C.I brass waste 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Earth work in excavation for laying of different types and sizes of R.C.C spun pipes with disposal of excavated earth within intial lead and lift as per specification and direction of E/I. For classification of soil item - A

Labour for laying fitting and fixing NP2 R.C.C spun pipe with collars in lines level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, red light and barrier etc. all complete as per specification and direction of E/I. 150mm dia R.C.C spun pipe. Upto 3.0 metre depth of invert below G.L

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600*450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600*475mm G.I cover with frame (weight not ness than 36 kg ) along with earth work in excavation and 80mm thick P.C.C, (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Supplying and fixing NP2 Hume pipe etc. (150 mm dia)

Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm

Single tee with door 110x110x110 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

100 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes

32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes

20 mm nominal dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Special type C.P. bath room fitting for V.I.P. Buildings (JAL, Jaquar, Mark or Equivalent) Pillar cock (Long neck)

Bib cock (2 Way)

Angular stop cock (Long Thread) ISI Marked

Pressure Adjustable Shower with revolving joint (Health F

açade)

Towel Rail 24"

Soap dish

Point wiring in PVC conduit, with piano type switch :- Wiring for light point/fan point/exhaust fan point/call bell point, with 1.5 sq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, piano type switch, phenolic laminated sheet with suitable size PVC/MS box etc as required. Group C

Power plug wiring in PVC conduit (2*4 sq. mm):- Wiring for light/power plug with 2 * 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, along with 1 No 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc as required.

Circuit/submain wiring in PVC conduit :- Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. 2*1.5 sq.mm + 1*1.5 sq.mm earth wire

2*2.5 sq.mm + 1*2.5 sq.mm earth wire

4*6.0 sq.mm + 2*6.0 sq.mm earth wire

4*10 sq.mm + 2*6 sq.mm earth wire

S/F Piano type switch / socket :- Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc. as required. 5/6 amps, one way switch

3 pin 5/6 amps, socket outlet

15/16 amps, one way switch

15/16 amps, 6 pin socket outlet

Electronic step fan regulator, deluxe

S/F light plug point with piano type accessories :- Supplying and fixing suitable size GI/PVC box of 75mm * 75mm * 50mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch connection, painting etc as required. (For light plugs to be used in non residential buildings)

S/F power plug point with piano type accessories :- Supplying and fixing suitable size GI/PVC box of 121mm * 173mm * 48mm/(6"*8") (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps type switch connection, painting etc. as required.

S/F ceiling rose :- Supplying and fixing 2 pin 5 amps. Ceiling rose on the existing junction box/ wooen block including connertion etc as required.

S/F Batten holder :- Supplying and fixing Batten / Angle holder including connertion etc as required.

S/F Dingdong Call bell :- Supplying and fixing Ding-Dong sound call bell single phase. 230 volt, complete as required.

ITC exhaust fan upto 450mm sweep :- Installation of exhaust fan upto hole to suit the size of the above fan, making good the damage, connection, testing, commmissioning etc. as required.

S/F S.P MCB DB :- Supplying and fixing following way single pole and neutral sheet steel MCB distribution board , 240 volts, on surface / recess, complete with tinned copper bus bar neutral bus bar, earth bar, din bar, interconnections, powder painted including erathing etc required. (But without MCB / RCCB / Isolator) 4 way, double door

S/F 'C' series, MCB :- Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. 6/32 amps, single pole

S/F four pole MCB isolator :- Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required. 40 amps

Earthing with G.I earth pipe 4.5 mtr long. 40mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.

Earthing with copper earth plate 600mm * 600mm * 3mm thick including accessories and providing masonry enclosure with cover plate having locking arranngement and watering pipe etc. (with charcoal or coke and salt) as reqiured.

Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required.

Providing and fixing 25mm * 5mm G.I strip in 40mm dia G.I pipe from earth electrode including connection with G.I nut.bolt, spring, washer excavation and re-filling etc. as required.

P/F G.I lightning condutor finial :- Providing and fixing of lightning condutor finial made of 25mm dia 300mm long, G.I tube, having single prong at top with 85mm dia 6mm thick G.I base plate including holes etc complete as required.

Reverting, sweating and soldering lightning condutor tape :- Reverting, sweating and soldering of copper / G.I tape (with another copper / G.I tape base of the finial or any other metallic object) as required.

P/F G.I lightning condutor tape in horizotal run :- Providing and fixing G.I tape 20mm * 3mm thick on parapet or surface of wall for lightning condutor complete as required. (for Horizotal run)

P/F G.I lightning condutor tape in vertical run :- Providing and fixing G.I tape 20mm * 3mm thick on parapet or surface of wall for lightning condutor complete as required. (for Vertical run)

Laying of one number PVC insulated and sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sqmm but not exceeding 95 sqmm direct in ground including excavation sand cushioning protective covering and refilling the trench etc as required.

S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast horsing and toughened glass cover (IP 66 protection) in existing pole / pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS : 10322 part- 5/ section -5 and shall be complete with all necessary accessories as reqiured. 30W LED Flood light

Single tee without door 75x75x75 mm

Supply Installation testing and commissioning of following size ceiling fan 3 Blades confirming to IS : 374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sqmm FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required. 1200mm (48") BLDC 5 star rating 32W Ceiling Fan

S.I.T.C of following rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required. 20/22W LED Tube light

Providing and fixing of XLPE, Aluminium Armoured PVC Cable confirming to IS IS7908 (Part-1) 1988 of grade 1.1KV. Make:- Havells / Finolex / Polycab 50 Sq. mm, 3.5 core

Providing , laying and fixing following dia GI pipe (medium class) in ground complete with GI fitting including trenching (75cm deep) and refilling etc. as required. 50 mm dia

15/16 Watt LED Bulb

9/10 Watt LED Bulb

12" (300mm) metal exhaust fan

S/F MCCB in cubical panel board :- Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubicle panel, making connection etc as required. 250 amps, 35 KA, fixed thermal setting

25-100 amps, 10 KA, fixed thermal setting

25-100 amps,16 KA, fixed thermal setting

S/F 'C' series, MCB :- Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. 6/32 amps, DP

50/63 amps, DP

S/F Busbar chamber :- Providing and fixing following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following capacity complete with all accessories including connections earthing the body etc as required. 300 amps

S/F sheet metal ON / OFF-Load changeover :- Providing and fixing following capacity 2 pole / 4 pole ON/OFF -load changeover switch with side handle operation in sheet enclosure in existing metal board including drilling holes in metal board making connection earthing the body etc as required. 100 amps, 4 pole

Pilot lamp for indcator

Digital volt meter 500V (3 phase class 0.5)

Digital A meter 500V (3 phase class 0.5)

Add 18% GST

Add 1% Labour Cess