Tamil Nadu

Active

Works

Civil Works - Water Works

Special Repairs to Marudur Melakkal Head Sluice in Srivaikundam Taluk of Thoothukudi District

Water Resources Department

Marudur | Tirunelveli, Tamil Nadu

Amount: ₹9.5 LCloses: 1 Oct 20263d left

Timeline

Published16 Sept 2026
Closes1 Oct 2026
Bid Opening1 Oct 2026

Tender Value

₹9.5 L

EMD Value

₹9,500

Closing Date

1 Oct 2026, 5:00 pm3d left

Tender Inviting Organisation

Name

Executive Engineer, WRD

Address

Executive Engineer, WRD, Lower Thamirabarani and Korampallam Aru Basin Division, Thoothukudi

Work Description

Special Repairs

Tender Information

Tender ID

2026_WRD_700803_1

Reference Number

02/LTKABD/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Lump-sum

Period of Work

180 days

Location

Marudur

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredDuly signed Tender Document (.pdf)

RequiredWRD Registration and Renewal Details (.pdf)

RequiredSelf Declaration for site visit, Tools and Plant and Affidavit attested by Notary Public (.pdf)

RequiredGST Reg, GSTR 3B, IT and Annual Turnover Certificate issued by CA (.pdf)

RequiredSite Engineer Certificate (.pdf)

RequiredExperience Certificates for similar works and other related documents (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹9,500

Important Dates

Last Activity

16 Sept 2026

Published

16 Sept 2026

Bid Opening

1 Oct 2026

Download Starts

16 Sept 2026

Download Ends

1 Oct 2026

Submission Starts

16 Sept 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (2 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Fabricating, Supplying and erection of Screw gearing steel shutters of size above 1.00 m and upto 2.00m width consist of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 100x50mm mild steel channel at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete.
1.01	Skin plate for Shutter of size 1.65 x 2.60 m	1	No	-	-
2Fabricating, Supplying and erection of Screw gearing steel shutters of size above 2.00 m and upto 3.00m width consist of skin plate made out of 10mm thick mild steel plate and horizontally stiffened with 150x75mm ISMB 150 at an interval not more than 0.50m and vertical stiffeners made out of 100x50mm mild steel channel ISMC at an interval not more than 0.60m and provided with 10mm thick mild steel and shutter Groove Angle made out of 65 x 65 x 6mm Mild Steel angle with required height including welding of Holdfast of size 40x40x6mm Mild Steel angle 3 Nos and Screw Rod 63mm dia Mild Steel Round Rod duly machined and fully threaded to suit the Capstan Head Assembly with required bolt and nut Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc..complete.
2.01	Skin plate for Shutter of size 2.20 x 2.30 m	1	No	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.26 MB

Work Item Documents

BOQ_842375.xls

BOQ • 0.27 MB

DR2.pdf

Tender Documents • 0.64 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Fabricating, Supplying and erection of Screw gearing steel shutters of size above 1.00 m and upto 2.00m width consist of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 100x50mm mild steel channel at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete.
1.01	Skin plate for Shutter of size 1.65 x 2.60 m	1	No	-	-
2Fabricating, Supplying and erection of Screw gearing steel shutters of size above 2.00 m and upto 3.00m width consist of skin plate made out of 10mm thick mild steel plate and horizontally stiffened with 150x75mm ISMB 150 at an interval not more than 0.50m and vertical stiffeners made out of 100x50mm mild steel channel ISMC at an interval not more than 0.60m and provided with 10mm thick mild steel and shutter Groove Angle made out of 65 x 65 x 6mm Mild Steel angle with required height including welding of Holdfast of size 40x40x6mm Mild Steel angle 3 Nos and Screw Rod 63mm dia Mild Steel Round Rod duly machined and fully threaded to suit the Capstan Head Assembly with required bolt and nut Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc..complete.
2.01	Skin plate for Shutter of size 2.20 x 2.30 m	1	No	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Fabricating, Supplying and erection of Screw gearing steel shutters of size above 1.00 m and upto 2.00m width consist of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 100x50mm mild steel channel at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete.

1.01

Skin plate for Shutter of size 1.65 x 2.60 m

2Fabricating, Supplying and erection of Screw gearing steel shutters of size above 2.00 m and upto 3.00m width consist of skin plate made out of 10mm thick mild steel plate and horizontally stiffened with 150x75mm ISMB 150 at an interval not more than 0.50m and vertical stiffeners made out of 100x50mm mild steel channel ISMC at an interval not more than 0.60m and provided with 10mm thick mild steel and shutter Groove Angle made out of 65 x 65 x 6mm Mild Steel angle with required height including welding of Holdfast of size 40x40x6mm Mild Steel angle 3 Nos and Screw Rod 63mm dia Mild Steel Round Rod duly machined and fully threaded to suit the Capstan Head Assembly with required bolt and nut Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc..complete.

2.01

Skin plate for Shutter of size 2.20 x 2.30 m