Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.0 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹15.1 L+₹66,310.50 (4.59%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid | |
| 3 | L3₹15.7 L+₹1.3 L (8.72%)Rejected-Finance BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L3 | Rejected-Finance Other than lowest bid | |
| 4 | L5₹15.8 L+₹1.3 L (9.10%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bid | |
| 5 | L5₹18.7 L+₹4.2 L (29.0%)Rejected-Finance SHOP NO 4 GULATI MARKET KRISHNA NAGAR NEHRU GARDEN ROAD JALANDHAR PUNJAB 144001 | JALANDHAR | PUNJAB | 144001 | L5 | Rejected-Finance Other than lowest bid |
Tender Value
₹16 L
EMD Value
₹32,000
Closing Date
19 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (West) Jalandhar Cantt
Kabir Road Jalandhar Cantt
WELCOME MAINT (BR AND EM) IN OFFRS MD ACCN IN A-1 AREA OF AGE B/R-1 UNDER GE (WEST) JALANDHAR CANTT
2022_MES_556412_1
GE/JAL(W)-59/2022-23
Open Tender
Civil Works
Item Rate
335 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer (West)
₹32,000
Yes
29 Nov 2022
7 Oct 2022
22 Nov 2022
7 Oct 2022
19 Nov 2022
7 Nov 2022
Amount
Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles all as specified.
M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius with built in cement mortar 1:6 all as specified.
All as per serial item No 2 above but except brick all as specifed
M&L for brick work in half brick thick walls built in cement mortar (1:4) using sub class ‘B’ old size bricks, straight or curved on plan to any radius complete all as specified.
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water built in cement mortar., complete all as specified and as directed by the Engineer-in-Charge
Material and labour for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished fair and even without using extra cement complete all as specified and as directed.
M&L for preparation of plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted over a coat of alkali resistant priming paint complete all as specified.
Material and labour for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished fair and even without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and distempering with two coats of oil bound distemper white or tinted over a coat of chalk whiting complete all as specified.
Material and labour for rendering 10 mm thick in ceilings in cement mortar 1:4 on brick work or concrete surfaces finished fair and even without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white lime wash complete all as specified.
M&L for preparation of old surfaces of plastered or unplastered walls and distempering with one coat of oil bound distemper complete all as specified.
M&L for complete removal of existing treatment on walls and applying 1mm thick wall care putty and applying two coats of oil bound distemper complete all as specified and as directed by EIC
M&L for prepration of old plastered or unplastered surfaces of walls and applying one coat of white wash on wall complete all as specified and directed by Engr -in-charge.
M&L for prepration of old plastered or unplastered surfaces of ceiling and applying one coat of white wash on ceiling complete all as specified and directed by Engr -in-charge.
M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of interior plastic emulsion paint as per manufactures instruction complete all as specified.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by the Engineer-in-Charge.
M&L for non skid ceramic, coloured, joint free, tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15mm thick cement mortar (1:4) complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skriting set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 10mm thick rendering as backing coat of CM 1:4 complete all as specified.
S&F glazed ceramic tiles 350mmx250mm/300mmx200mm, 7mm thick as on vertical surfaces viz dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including rendering 10mm thick cement mortar (1:4) complete all as specified and as directed
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm; as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15 thick cement mortar (1:6) complete all as specified and as directed.
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm; as in skirting etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles as in skriting over and including rendering 10mm thick cement mortar (1:4) complete all as specified and as directed.
M&L for machine cut kota stone slabs (22" x 22") in flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, over & including 15mm thick cement screed base in cement mortar 1:6 including rubbing and polishing to achieve mirror finish complete all as specified.
M&L for machine cut kota stone slabs (22" x 22") 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, over & including 10mm thick cement rendering in cement mortar 1:4 as in riser of steps, skirting, dado and pillar laid over cement including rubbing and polishing to achieve mirror finish complete all as specified.
M&L for 25 mm thick granite machine cut as in window cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over & including bedding layer or screed 15 mm thick in cement mortar 1:4 including cutting , grinding, rounding edges, rubbing and polishing complete all as complete all as specified and directed by Engr-in-Charge.
Dismantling of AC corrugated/semi corrugated) sheets as in roof covering all as specified and directed by Engineer-in-Charge.
Material & Labour for 6 mm thick AC sheet corrugated or semi corrugated sheets in roofs fixed with `L' hook or `J' bolt.
Supply & Fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering or cladding to wall fixed with self tapping screws as specified .
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F anodised aluminium frame for doors,windows, partitions ,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F anodised aluminium door shutters ,aluminium section weighing 0.55 kg/m including necessary joining cleats ,glazing clips, rubber neoprene packing, hanndles 2 Nos in each door, butt hinges, anodised aluminium snap beading screws etc complete all as specified.
S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F floor door stopper of aluminium alloy body and tongue ,anodised,with hard drawn steel spring fixed in floor having overall length 150 mm
S&F sheet glass 4.8 mm thick ordinary quality to be fixed in aluminium frame work in square exc 0.5 sqm in each pane
Taking down Chowkat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by EIC.
Taking down Chowkat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by EIC.
Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2 sqm each complete all as specified and as directed.
Refixing shutters of any description not exceeding 1.00 Sqm each in the same opening complete all as specified and as directed.
Refixing shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each in the same opening complete all as specified and as directed.
Securing or easing and adjustment without taking down the shutter of any description exc 1 sqm and n exc 2 sqm each complete all as spd and directed
S&F solid PVC door frame of size 50x47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing
S&F steel window 1.25mm thick sheet box type ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW, sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 (four Nos for each window) including following fittings welded to frame/shutter:- (a) Hold fast,150mm long of 12mmx3mm made to shape-04 Nos per window (b) Handle of Z section 20mmx25mm 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf. (d) Z Section 20mmx25mm,100mm long stopper- 01 No per leaf (f) MS pintle hinges of size 75mmx12mm-2 Nos per leaf. (g) Fabrication and fixing arrangement as per Drg No.CEJZ/TD-06/07. Note:- Wire mesh shall be measured and paid separately under appropriate item.
All as per Item No.44 here-in-before but glazed window shutter. Note:- Glass shall be measured and paid separately under appropriate item
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde- E- 250) quality- A
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L mild steel work as in holdfasts, knee piece and similar small article complete all as specified.conforming to Fe-290 Gde-E-165
S&F 35 mm thick plain, framed, panelled shutters factory made of second class hard wood (Hollock) door shutters with two panels having lock rail and panels of 9mm BWP commercial ply, the size of rail and style as per IS 1003 (part-I), kiln seasoned and chemically pressure treated hammer marked complete all as specified.
S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35mm thick glazed and skeleton shutters of 2nd class hard wood (Hollock) open rebated and prepared to receive glass gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I Sec 8 clause 8.23 (a).
S&F 18-19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified.
S&F continuous (Piano) hinges, mild steel bright finish or electro galvanized (width of flap when open 30mm) ISI marked complete all as specified and as directed.
M&L for 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified .
S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.
S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden surfaces including punching or drilling out old glazing pins/spring clips exceeding 1.5 Sq.m and providing and fixing new pins/clips complete all as specified.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed
S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified as directed.
S&F 200 mm long aluminium, anodized, barrel tower bolts of extruded section and ISI marked complete all as specified.
S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and ISI marked complete all as specified.
S&F 150 mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed
S&F aluminum cast type anodized handles 150mm long. complete all as specified.
S&F125 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed
S&F 100 mm size butt hinges galvanized mild steel, medium weight, cold rolled complete all as specified.
S&F 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed
S&F 40m dia cup board knobs fixed with nut , screw and washer of brass polished
S&F 300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
Supply and fixing in repairs brass chromium plated health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.
S7F Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified
S&F Ball catcher with 8mm dia steel ball and brass body and striking plate complete all as specified
M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of old wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified.
S&F 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified.
Refixing old 15mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified.
S&F 20mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified.
Refixing old 20mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.
M&L fixing in repairs 15mm bore chromium plated shower rose with or without swivel joints, 125mm size including fixing to steel pipe or union circular or sqare in shape complete all as specified and directed
Supply, hoist and fix in position; 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified .
Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified.
S&F 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density polythene ball screwed for iron pipe (Min for 20mm – 210 gm) complete all as specified and directed.
S&F in replacement 15 mm bore chromium plated bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed complete all as specified.
S&F in repair 15 mm bore stop valve (or angle valve) fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.
S&F in replacement PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed.
S&F in replacement 15mm bore chromium plated brass mixer for mixing hot and cold water for wash basin screwed down for dia iron pipe complete all as specified and directed.
S&F in replacement 32 mm bore waste coupling of PTMT (half or full threaded) with minimum weight 45 gms complete all as specified and as directed.
S&F in replacement chromium plated grating 125mm dia circular, fixing with cement mortar 1:3 on Nahani or floor trap complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.
S&F in repairs vitreous china ware squatting pan ‘Orissa’ pattern size 580x440mm white with integral foot rest including connection to trap and flushing pipe, anti-syphonage pipe etc and making good to floor etc complete all as specified and as directed.
S&F in repair vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.
S&F in repair 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified.
S&F PVC bath cabinet of size 585mmx483mmx110mm with mirror all as specified.
S&F brass chromium plated towel rail 20 mm dia, 600mm long fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed.
S&F 300mm long mild steel ordinary rat tail rod pattern springs for doors including roller and roller plate ISI Marked complete all as specified and directed.
S&F in replacement cast iron floor trap including jointing to waste pipe 75mm dia of outlet in cement mortar (1:4) complete all as specified and as directed.
M&L fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guards and railing 60cm long including brass screws and PVC rawl plugs complete all as specified and directed
S & F 110 mm bore PVC (SWR) pipe of pressure rating 6kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.
S&F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm complete all as specified and directed.
S & F 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.
S&F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.
S&F 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement incl taking down damaged floor trap in any position complete all as specified and directed.
S&F 110mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement incl taking down damaged floor trap in any position complete all as specified and directed.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
S&F in replacement; sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed by EIC.
Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls and floors .
Taking down sub main wiring of two single core PVC cable PVC insulated 4 / 6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. as directed by Engineer-in-Charge.
Taking down main switch / DB as directed by Engineer-In-Charge.
M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified. (a) One light / fan / call bell point controlled by one, one way switch.
All as per Ser item No -116 above but for 5 amps socket on independent board
All as per Ser item No- 116 above but for 5 amps socket on same board
All as per ser item No- 116 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.
Supply and fix in repair Modular switch 6 Amps single pole one way as per existing make & model/ as per sample .
Supply and fix in repair Modular switch 16 Amps single pole one way as per existing make & model/ as per sample . .
Supply and fix in repair Modular bell bush 5 Amps as per existing make & model/ as per sample .
Supply and fix Modular multi socket 3 pin and 2 pin 6 Amps round and flat as per existing make & model/ as per sample .
Supply and fix in repair Modular socket 6A /16 A Twin socket heavy duty as per existing make & model/ as per sample .
Supply and fix Modular metal flush box 18 way with modular white colour plate with frame including and making good to the disturbed surface complete all as directed by Engr-in-Charge.
All as per Item No. 125 above here-in-before but 12 way
All as per Item No. 125 above here-in-before but 8 way
All as per Item No. 125 above here-in-before but 6 way
All as per Item No. 125 above here-in-before but 4 way
All as per Item No. 125 above here-in-before but 3 way
All as per Item No. 125 above here-in-before but 2/1 way
Supply & fixing switch piano flush type single pole one way 5 Amps all as specified.
All as item No 132 above here-in-before but single pole 5 Amps two way all as specified.
Supply & fixing switch piano flush type single pole 15 Amps.
Supply & fixing socket outlet 5 Amp flush button type all as specified.
All as per item No. 135 above here-in-before but 6 pin 5/15 Amps multi type.
Supply & fixing ceiling roses surface bakelite two three terminals 65 x 50 mm all as specified.
Supply & fixing lamp holder PVC, insulated body with back plate suitable for batten fittings including LED lamp 9W all as specified.
Supply & fixing bell electric (dingdong) 230 volt, SP
Supply and fix in repair modular fan regulator step type 240 V, 120 W , 2 modules all as as per existing make & model/ as per sample .
Supply and fix ceiling fan regulator Electronic rotary Step type single phase A/C 230 volts all complete as specified and directed.
Supply & Fixing MCB DP 240 volts 40 Amps to 63 amps to be fixed in the existing DBs.
Supply & Fixing MCB single pole , 240 volts, 6 to 32 Amps to be fixed in the existing DBs.
Supply & Fixing MCB, 240 volts, 100 Amps SPN .
Supply & fixing MCB DB SPN with 200 amps rated Bus Bar suitable for MCBs 8 way double door all as specified and directed by Engr-in-Charge.
Supply & fixing wall light fixure made up of polycarbonate, suitable for 9 W retrofit LED lamp B22 base all as specified and directed
S &F in repair LED secuirty light fitting 60 Watt with Electronic driver IP 66 Powder coated pressure die cast aluminum body with heat resistance toughened glass and accessories like GI Bracket , clamps etc
S & F in repair surface mounted LED Batten with LED tube rod 2 Feet 10W internal surge protection device of 4 KV with voltage band 140-280V and making electrical connection to ceiling rose all as directed
S & F in repair 6.5 W LED Bulk Head fitting and connecting electricity using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed
S&F in replacement LED lights fitting 1 x 20 W Decorative box type with driver, holder including LED tubelight connecting up with electricity to celling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.
Supply & fixing LED tube rod 20 W in existing tube light fittings including making necessary conections as required for LED tube all as directed .
S & F distribution board TPN, double door, 08 way 240 Volts with sheet metal enclosure 200 Amps busbar suitable for isolator
S/F MCB TPN 100 Amps 415 volts.
S & F LED bulb 9 Watt complete all as specified
M&L for submain wiring with two RUNS of single core 4 sqmm for main wire and one run of single core 4 sqmm as earth wire of stranded copper conductor FLRS PVC insulated unsheathed cables drawn through and including pvc concealed conduits in wall and necessary cutting and chassing for rigid PVC conduit ISI marked of required sizes and all accessories complete all as specified & directed Note:- Two run of single core 4sqmm copper wire FRLS for main, one run of single core 4sqmm copper wire as earth wire and one run of PVC conduit shall be considered as one unit
Supply & fix bakelite Hylem sheet 3mm thick of size 10"x12" superior quality, including cutting of sheet to fix switch socket & regulator, including unscrewing the existing switch, socket, regulator and fixing the same on new sheet with new machine screw complete all as specified and directed.
All as per item no above but size 8"x10" complete all as specified and directed.
All as per item no above but size 8"x5" complete all as specified and directed.
ASHWANI SETHI
B.P CONSTRUCTION CO
JAGDISH KUMAR SEHGAL
FRIENDS ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .