Providing U/G Cable, Street...

11.69.2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 2. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre [Through Rate]

11.78 Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. [Through Rate]

24.1.1 EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]

24.1.2 EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]

24.1.6 EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. [Through Rate]

24.4.8.7 STREET LIGHT 8.7. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 9 Metre Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm. [Through Rate]

24.5.2.3 MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate]

24.10.6 CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 6. Digging of pucca road in required width for laying of cable / pipe complete in all respect up to the entire satisfaction of Engineer-in charge [Through Rate]

17.47 Restoration of Rain Cuts Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes, as per clause 3002 of MORT&H specifications [Through Rate]

23.22.1.9 MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA [Through Rate]

23.22.5.1 MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate]

23.27.3 Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 3. M.S. pedestal of size 750 mm wide , 1200 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0 [Through Rate]

34.3.2 Printing New Letter and Figures of any Shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade 2. English and Roman (Hyphens not to be paid) [Through Rate]

2.EL315 EL315. Neutral link and Bakelite base plate [Rate]

24.13.24 LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 24. 16 Sq mm 4 core (Arm.) [Through Rate]

Job Work Supply, erection, testing and commissioning of ELEX-TWS-2EXT / Amson’s make Automatic electric timer to switch ON/OFF the street light / road light automatically. It should have lux level adjustable switch, with extensible mountable sensor. It will change ON/OFF timing automatically as per lux level of season throughout the year as purchase in the timing of sun-rising and sun setting suitable for street / road light. It will have three Nos. LandT make, 3 pole power contactor model MNX-25 to control 25 amp. Per phase with 220 Volt coils. It will have auto/manual switching mode for repair of street light during day time and the whole unit fixed on Bakelite sheet to assemble the components etc. The erection of the complete unit in the existing pedestal with complete wiring upto the satisfaction of the Engineer-in-charge (Excluding GST).

Job Work Supply and erection of hot dip galvanized double arm bracket with each arm of 50 mm dia (Nominal) MS pipe 1500 mm long (3.25 mm thick) duly welded with 450 mm long 3 mm thick octagonal canopy of suitable dia (3mm thick) with angle of inclination 105 degree to the vertical. The top end of the canopy should be closed with MS sheet of 16 SWG. The bracket and canopy be supported with bracing of 1400 mm long, 25 mm dia hot dip MS pipe (2mm thick). The rate are inclusive of cutting, welding and all labour charges. The bracket shall be as per design and drawing enclosed complete all respect upto entire satisfication of Engineer-in-charge of the work. (Excluding GST).

Job Work Supply and Erection of Copper Conductor PVC insulated and Sheathed, 3 core circular flexible wire, size 2.50 sqmm compelted in all respect upto entire satisfaction of Engineer-in-Charge of the work. (Excluding GST)..

Job Work Supply and Erection of Junction Box Door Cover Plate for Hot Dip Galvanized Octagonal Pole of suitable size with 2 Nos. SS Allen Key Bolts complete in all respect upto entire satisfaction of Engineer-In-Charge (Excluding GST).

Job Work Supply and Erection of Stainless Steel Wire Rope dia 6mm for High Mast Pole complete in all respect upto entire satisfaction of Engineer-In-Charge (Excluding GST).

Job Work Supply and Erection of Winch Stand, Winch and 1 HP 3 phase Motor with complete power tool and remote for High Mast Pole complete in all respect upto entire satisfaction of Engineer-In-Charge (Excluding GST).

Job Work Credit of Iron Scrap of old M.S. Pedestal including lifting of scrap material from the site of work up to the entire of Engineer-In-Charge of work.

Job Work Credit of Old Cable Scrap of size 25 sqmm x 4 core (Aluminium Conductor) including lifting of scrap material from the site of work up to the entire of Engineer-In-Charge of work.

Job Work Supply and erection of 135 watt LED Street Light luminaire with highly efficient high power multiple LED’s with lens, pressure die cast aluminium housing, reflector and enclosed with toughened glass, IP-66 level, having light efficacy of more than 120 lumens/watt complete in all respect as per specifications attached (Excluding GST) Make: - LT/Bajaj/Phillips/Panasonic

Please Enable Macros to View BoQ information