03/SE-I/2024-25

Amount

Cleaning thick bushes & throny jungle without uprooting with disposal.

Construction of granular sub-base by providing well grades material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compaction with smooth wheel roller to achieve the desired density, as per MORD specification 401.

Providing laying spreading and compacting stone agregates of specification sizes (63 mm to 45 mm) to water bound macadam specification including spreading in uniform thickness, hand packing rollding with three wheel 80-100 kN static roller in stages to proper grade and camber MORD specification 405.2 (WBM-2)

Providing laying spreading and compacting stone agregates of specification sizes (53 mm to 22.4 mm) to water bound macadam specification including spreading in uniform thickness, hand packing rollding with three wheel 80-100 kN static roller in stages to proper grade and camber MORD specification 405.3

Brick Lining on both side of the Road of M-150 Bricks 7 cm wide 11 cm deep, laid with mud mortar including labour & Supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer in charge.

Providing and laying Primer coat with bitumen emulsion (SS-A) on prepared surface of granular base including cleaning of road surface and spraying primer at the of 0.70-1.00 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with bitumen VG-10 grade using bitumen pressure distributer at the rate of 0.30 kg. per Sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheele 80-100KN static roller capacity, finished to required level and grades complete all specified in Manual MORD technical specification clause 508 and as directed by the Engineer in charge. (Paver Machine)

Providing and laying seal coat by mannual means with 80/100 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 by Paver Machine

Providing and applying 2.5 mm thick road marking strips of specified shade/colour using hot thermoplastic material by fully/semi autoatic thermoplastic paint on road surface including cost of material, labour, T&P cleaning the road surface of all dirt, seats oil, grease and foreign material etc. complete.

Earth work in filling shoulder of road including lift upto 1.50 m. and lead upto 1.00 km. by power transport

S F INFRA PROJECTS

Basant Enterprises

AKANKSHA ASSOCIATES

VIJAY LAXMI ASSOCIATES

M/S CHHATERPAL SHARMA

M/S SUDHIR KUMAR CONTRACTOR