PROVN OF CAR/ SCOOTER PARKING SHED NEAR OFFICE COMPLEX AND SPL REPAIRS TO BLDG NO P-31 OF 102 INF BN (TA) PUNJAB AT MIL STN KALKA UNDER GE JUTOGH

Amount

Taking down of cement plaster on walls and ceiling of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over chalk whitening complete all as specified and directed.

M & L for preperation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Complete removal of existing trearment on wall complete all as specified and directed.

M & L for applying a layer of 1-2mm thick wall care putty on walls complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thick (below or above ground level) and removing rubbish off the premises complete all as specified and directed.

M & L for machine cut Kota stone slab flooring 18-20mm thick fixed over and including 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including complete all as specified and directed.

M & L for machine cut Kota stone slab 16-18mm thick fixed over and including 10mm thick plastering in CM 1:4 as in riser/dado/skirting including rubbing and polishing complete all as specified and directed.

M & L for grinding/ polishing of existing kota slab flooring complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match fixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic colored tiles of size 350X250X7mm /450X300X7mmthick, on vertical surface as in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick plastering in CM 1:4 complete all as specified and directed.

M &L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone agg finished even & smooth without using extra cement as in plinth protection complete all as specified and directed.

Dismantling AC (corrugated or semi corrugated) roof sheeting of any description, thickness complete all as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with cranked huck bolt with washer self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with cranked huck bolt with washer self tapping screws as in ridge eves, gutter etc complete all as specified and directed.

S & F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, anfle, channel or flat sections) including distance pieces cleats etccomplete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm complete all as specified and directed.

S&F Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building boards white/off white (E board designer) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or slopingcomplete all as specified and directed.

M & L for preparation of new or previosuly untreated steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint to steel surface over one coat of red oxide primer complete all as specified and directed.

M&L for preparing old painted steel & iron surfaces of any description over 10 cm in width or girth, including roof and applying one coat of white/ approved colour/ shade synthetic enamel paint complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

M&L for brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed .

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs and removing from site complete all as specified and directed.

S&F Rotational moulded polythelene three layered water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed in SSR Part-I

S&F in repair ball valves 15 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. (Minimum weight 15mm-142gms)

S&F in repair 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

S & F pressed steel frames of size 125x60mm for door with one or more rebates incl necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

S & F pressed steel frames for door with one or more rebates incl necessary fixing lugs hinges lock strike plate etc complete all as specified size 105 x 60

M&L for PCC1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in filling back of pressed steel chowkhats complete all as specified and directed.

S & F 2nd class hardwood 35mm thick factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venerred particle board with commercial veneering on both faces. The size of rail and style as per IS- 1003 (part -I) kiln seasoned and chemically pressure treated of 2nd class hardwood rails and style for doors complete all as specified and directed.

M &L for 35mm thick IInd class hardwood glazed & skeleton shutters , open rebated & prepare to receive gauze divided into squares ,with plain , chamfered and rounded, mitred and rebated sash bars, any numbers size of members of shutter as specidied in SSR Part-I section 8 (clause 8.24 (a) complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, fixed in opening as per specification & drawing given in SSR complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S& F 4mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S& F stainless steel wire cloth 0.36mm nominal dia or wire and average width or apeture 1.40mm and fixed with stainless steel wire staplecomplete all as specified and directed.

S&F 100 mm long butt hinge cold rolled mild steel medium weight complete all as specified and directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extrunded sections and fixing bolt and sliding bolt of extrunded sections or cast aluminium alloy complete all as specified and directed.

S&F floor door stopper Aluminium body and tongue, anodised overall length of cover plate of size 75 mm long with hard drawn steel spring complete all as specified and directed.

S&F 150mm, ordinary rat tail rod patttern door springs including roller and roller plate complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290-0 or Gde E-165 complete all as specified and directed.

M & L for preparation of new or previosuly untreated wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of Synthetic enamel paint to wooden surface inc one coat of pink primer complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified and directed.

S & F 15 mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin, white, flat back size 550 x 400mm including, 600 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.

S & F in repair viteous china squating pan " ORISSA PATTERN" of size 580mm x 440mm white with integral foot rest inlet incl PCC 1:2:4 type B-1 for making good the floor complete all as specified and directed.

S & F in repair PVC valve less syphonic action type flushing cisten of 10 litres capacity white, inlet hall valve float side handle incl brackets of angle iron of size 25 x 25 x 4mm incl PVC flush pipe of 32mm dia 90cm long for low level fixed to squat pattern closet incl all joints and making good the floor and PVC connection 15cm long complete all joints and making good to floor complete all as specified and directed.

S&F in repair 15mm bore dia chromium plated Pillar tap, fancy type cast copper alloy with capstain head, screwed down high pressure with long screwed shank and fly nut complete all as specified and directed.

S & F 15mm bore PVC water connection 450mm long with brass nuts and fitted complete all as specified and directed.

S & F in repair stop valve of 15mm bore cast copper alloy screwed down high pressure with crtuch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair 15 mm bore bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair stop valve of 15mm bore cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crtuch or butterfly handle capstan head screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair 15mm bore brass chrominum plated shower rose 100mm size with or without swivel joint incl fixing to steel pipe complete all as specified and directed.

S&F Tubler towel rail, 20mm dia D type 60 CM long between flanges complete all as specified and directed.

S&F PVC (SWR) floor trap of 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends complete all as specified and directed.

S&F in repair 25 mm thick drapery rod ,mild steel,powder coated with fixing brackets ,end knobs ,stop, etc. complete all as specified and directed.

Surface excavation in hard/dense soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified and directed.

Retruning filling in including spreading levelling watering & well ramming in layers n.exc 2.5 cm complete all as specified and directed.

Removing excavated material/soils not exceeding 50 mtr and deposited where directed a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L 75mm thick PCC (1:4:8), type- D-2, using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

M&L for 50 mm thick PCC (1:2:4), type B-1, using 20 mm graded crushed stone aggregate as in plinth protection, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints complete all as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness , M- 40 Grade with grey cement and no pigment and laying over 25mm thick sand cushining complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping, benching cills, roof kerb, seismic and other similar bands and the like including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of grade Fe-410 (Gde E-250) quality-B complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck 5 to 10 mm complete all as specified and directed

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work rough finished surface complete all as specified and directed.

M&L for PCC 1:2:4, type B-2, using 40 mm graded crushed stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses coloumns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint complete all as specified and directed.

Taking down shutters only of size exc.1 sqm and n. exc 2 sqm each complete all as specified and directed.

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash all as required complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with concealed Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification complete all as specified and directed.

One light /fan/bell point controlled by one, switch complete all as specified and directed.

One 5 pin 5/6 Amp socket on the same board complete all as specified and directed.

One 5 pin 5/6 Amp socket on independent board complete all as specified and directed.

All as per item No 89.00 above but for one 3 pin 15 Amp socket independent but with 2.5 sq mm PVC insulated (FRLS) unsheathed copper stranded conductor and earth wire with 2.5 Sqmm complete all as specified and directed.

S & F switch piano type 240 V, 6 Amp , single pole one way flush type complete all as specified and directed.

S&F socket 5 pin, 6 Amp, flush type piano (multi purpose) complete all as specified and directed.

S&F Socket 15 Amps flush type 230 Volts , AC complete all as specified and directed.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.

M&L Fan regulator Electronic type 240 Volt single phase suitable for ceiling fan step type complete all as specified and directed.

S&F ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F for lamp holder pvc body with back plate complete including with 9/10 Watt LED lamp complete all as specified and directed.

S&F in replacement of sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified.

S&F MCB SPN 06 to 40 Amps 240V incl all termnials, fitting etc and including taking down existing MCB's

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc and including taking down existing MCB's.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

S&F LED bulkhead luminaire 10W decorative type as per sample complete and including taking down existing fittings all as specified & directed. Make :Havells cat part No RUGBYNEONFT10W LED 860SSYMTOPC/ Polycab Cat Part No. PLT0101316/ Crompton Cat Part No. LBH-10-CDL.

S & F LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete and including taking down existing fittings all as directed. Make : Havells Cat part No ENDURA LINE ARNEOBS20W LED 840 SPCWH, Polycab Cat part No LDO0103023/ Crompton cat part No LCCLB-24-CDL/ Bajaj Cat ref BCLSBAL 20W CW.

S&F in replacement LED Street Light Luminaries 45 watt fitting with driver having secondary optics with uniform distribution of light. Pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V, including GI brackets with nuts and bots of suitable size ,making connection from ceiling rose to LED light fitting with suitable cable size for connection complete all as specified and directed. Make :-CROMPTON Cat no - LSTP-45-CDL , Bajaj Cat No BRTFG 45W LED I & Polycab Cat No PCGLS T1 45 N.

R. P. Suppliers and Construction Co.

m/s jupiter builders

M/S Dahiya Builders

SS BUILDERS

AAR PEE ENTERPRISES