REPAIR TO COMPOUND WALL, FENCING, GATE, PATH AND HARD STANDING IN ZONE B AREA UNDER AGE (I) AYODHYA CANTT

Amount

Excavation in trenches not exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and gettingout in soft / loose soil complete all as specified and directed by Engr-in-Charge.

Removing excavated material (soil) at a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Charge.

M&L for brick work with old size subclass 'B' bricks built in cement mortar (1:6), straight or curved on plan to any radius complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

S&F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

S&F TMT steel bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or with securing clips complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description and any in position not other wise provided for complete all as specified and as directed by the Engr-in-charge.

S&F mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters, running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Dismantling of fencing wire mesh of any type and description complete all as specified and as directed by the Engr-in-charge.

S&F in repairs, galvanised 2 strand , steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolt, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) ,complete all as specified and as directed by the Engr-in-charge.

S&F mild steel screw bolt (machine made) with hexagonal at one end and screwed the other end, each screwed end to be fitted with washer and one hexagonal nut, size of bolt 12mm dia and length of bolt exc 5cm but n.exc 10cm long. (from under side of head to the end in 75mm) complete all as specified and directed by Engineer-in-Charge.

Supply only steel wire chain link fencing 75X75mm mesh size, secured with MS flat, straining bolt etc complete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, and mesh size type to any type of standard, rail straining bolts etc including binding, provission of binding wire complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregsate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregsate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in lintel upto 1.5m clear span, cill, steps, seismic and other similiar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge.

Use & waste form work to sides of columns, pillars, posts, struts, piers etc for fair finished flat concrete surfaces complete all as specified and directed by Engr-in-Charge.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls etc and applying three coats of white wash complete all as specified and as directed by Engr- in- Charge.

Dismantling posts or struts (wood, steel or RCC) of any section including taking out embedded portion from concrete, brick work, masonry etc and making good disturbed ground complete all as specified and as directed by Engr- in- Charge.

S&F mild steel ornamental and intricate disign framed work as in grills, gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 and hanging gates including pintel hinge, stops, hand made sliding bolt etc complete all as specified and as directed by Engr- in- Charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer over complete all as specified and directed by Engr-in-Charge.

Dismantling of stone slabs and tiles, laid dry in floors, aprons etc of any description or thickness complete all as specified and directed by Engr-in-Charge.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base and the like complete all as specified and directed by Engr-in-Charge.

M&L for 60mm thick machine pressed precast coloured concrete interlocking paver block of any shape using M-35 Grade concrete with grey cement and pigment, conforming to IS-15658-2006, laid dry over sand cusuioning complete all as specified and directed by Engr-in-Charge. Note:- Sand for cusioning shall be measured and paid for separately.

M&L for sand filling under floors, cushioning to paver blocks / tiles or filling in foundation etc including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying further floor finishes complete all as directed by Engr-in-Charge.

M&L for chequered cement concrete tiles of size 25cm x25cm x 22mm thick with grey cement and no pigment, laid over screed bed, set, jointed and pointed in neat grey cement slurry as in floors, pavings and the like complete all as specified and directed by Engr-in-Charge.

M&L for precast compound cement panel of size 6' x 1'x 1.5" (1800mm x 300mm x 40mm) using piece of hitension wire of 3mm dia per set, columns of size 6"x6" (150mmx150mm) reinforced with 6 Nos of 3mm dia hitension wire using M-20 grade concrete including necessary earth work complete all as specified and directed by Engineer-in-Charge.

R K BROTHERS (BID ID -3147960)

B.S.S.ENTERPRISES (BID ID -3147912)

Pundir Construction Co. (BID ID -3148012)

awashyakta enterprises (BID ID -3147796)

Jairajyadav security services (BID ID -3147407)