SPL REPAIRS TO BATHROOM BLOCKS OR S LIVING LINE BLDG NO P 147 (HQ) AND SPL REPAIRS TO BLDG (E M) COMPLETE REWIRING INCL LED LIGHT FITTING IN BLDG NO P 175 (559 OTM ACCN) AT CMP CENTRE AND SCHOOL UNDER GE(SOUTH) BANGALORE.

Amount

Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) and removing servicebale tiles to stores and rubbish off rubbish off the same out side the MD land complete all as specified and as directed.

S&F non-skid coloured ceramic tiles joint free 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM 1:6 etc complete all as specified and as directed..

S&F coloured glazed ceramic tile digital series in verticle surface 350x250x7 mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick CM 1:4 backing coat complete all as specified and as directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc & brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and as directed.

M&L for 20 mm thick Granite Telephonic black including round cutting work for wash hand basin / sink (table rubbed and polished) as in cooking platforms , steps, jambs, pillars, window cills, and like in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade of granite and like complete all as specified and as directed.

Taking down Chowkhats or frames exc. 1.5 sq. m but n. exc 4 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each complete all as specified & directed by Engineer-in-Charge.

S&F 35 mm thick 2nd class hardwood rail and styled plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commerecial veneering on both faces. The size of rail and stiles as per IS : 1003 (Part-I), klin seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar exc half brick wall but n exc one brick wall for incerting hold fast and securing bolts etc and making good dismenteled portion in cement mortar 1 : 3 or cement concrete 1 :2 :3 type B1 as required all as specified and as directed.

Forming Jambs, etc to openings (to foregoing items), including cutting, toothing and properly bonding in old work also facing jointing and pointing to match existing work in cement mortar 1:4 complete all as specified & directed by Engineer-in-Charge.

S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.)

M &L for Factory Made Particle Board Core Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and as directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified.

S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F Stainless steel butt hinges of size 100mm fixed Complete all as specified and as directed.

S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified.

S & F aluminium anodised alloy barrel tower bolt 200mm size all as directed.

S & F extruded aluminium alloy handles, fabricated type anodised 150mm size

S&F Stainless steel butt hinges of size 100mm fixed Complete all as specified and as directed.

Taking down Chowkhats or frames n exc 1.5 sq. m each (without taking off shutters from the frame) complete all as specified and directed.

S&F 4 mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

Repairs to existing steel window / Ventilator hinges by means of replacing the old hinge with box type and welded to steel shutter and frame , easing the shutter,and making good the suface finsh to match extg wall surface complete all as specified and directed

Forming Jambs, etc to openings (to foregoing items), including cutting, toothing and properly bonding in old work also facing jointing and pointing to match existing work in cement mortar 1:4 complete all as specified & directed by Engineer-in-Charge.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed..

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc including complete removal of debris out side MD land complete all as specified and as directed..

M&L for rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces such as wall finished even and smooth with out using extra cement complete all as specified and directed.

M & L for applying two coats of white wash on newly plastered surfaces incl preparing the surfaces complete all as specified and directed .

M&L Rendering 5 mm thick on brick work or concrete surfaces on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for applying three coats of white wash on ceiling newly plastered surfaces incl preparing the surfaces.

M&L for preparation of old decorated/painted surfaces of ceiling and applying one coat of white washing including cleaning of splashes of white wash on floor/objects etc all as specified and directed.

M&L for preparation of old decorated/painted surfaces of walls and applying one of white was including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed.

Dismantling water tanks ans removing to store exc 500 & n exc 1000 litres

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top)vhoilsted and fixed in position all as specified in SSR Part-I complete all as specified & directed by Engineer-in-Charge.

S&F 20 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms) all as specified and as directed.

Supplying and laying of CPVC ball valve 20mm dia all as specified and as directed.

Supplying and laying of CPVC Union 20mm dia all as specified and as directed.

Supplying and laying of CPVC Tank adaptor 20mm dia all as specified and as directed.

Cutting chases, pinning in brick wall, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

Taking up or down steel tubing and connections,20 mm bore including claning for refixing or removal to store complete all as specified & directed by Engineer-in-Charge.

Taking up or down steel tubing and connections,15 mm bore (surafce or concealed type) including claning for refixing or removal to store complete all as specified & directed by Engineer-in-Charge.

S & F of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors (concealed type) complete all as specified and as directed.

S & F of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm dia male brass threaded adapter complete all as specified and as directed.

S&F of 20 mm dia female brass threaded adapter complete all as specified and as directed.

S & F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC bends any radius 75mm dia complete all as specified and as directed.

S&F in repair PVC bends any radius 110mm dia complete all as specified and as directed.

S&F in reapir PVC bends any radius 110 mm dia with access door complete all as specified and as directed.

S&F in repair PVC bends any radius 75 mm dia with access door complete all as specified and as directed.

S&F in repair PVC Single T any radius 110 mm dia with access door complete all as specified and as directed.

S&F in repair PVC Single T any radius 110 mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm branch piece, single (Single Y) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm branch piece, single (Single Y ) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm branch piece,double (double Y) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm branch piece,double (double Y ) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm vent cowl complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm vent cowl complete all as specified and as directed.

Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area n.exc 150 Sqcm complete all as specified and as dircted.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including CI/PVC/Vitreous china 'P' or 'S' trap complete all as specifed and as directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including vitreous china 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float, handle, bracket PVC short bend etc. complete all as specified and directed .

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type and Pedstal type WC complete all as specified.

S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for cold water complete all as specified.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified.

S&F in repair 32 mm dia PVC waste pipe for WHB complete all as specified.

S &F in repair vitreous chinaware urinal half stall type white with grating & union for discharge pipe down take pipe etc. all as specified and as directed.

S&F 15 mm bore CP push taps suitable for urinals any colour , screwed for iron pipe and including Urinal spreader fixed in repairs (Minium weight 15 mm-47gms).complete all as directed

S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified.

S&F in repair 32 mm dia PVC waste pipe for urinals complete all as specified.

S&F in repairs 15mm Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe all as specified and as directed.

S&F 15 mm bore brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule all as specified and as directed.

S&F 15mm pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed.

S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed.

S&F in repairs shower rose 15mm of brass chromium plated 125 mm dia round with shower arm of 190mm Long Light Body complete all as specified and directed.

S&F,in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Cat Part No of Cera F8030105 AB or equivalent in parryware/hindware/prayag)

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap, plain with SS grating including solvent cement all as specified and as directed.

S&F in repairs SS soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

M&L for demolition reinforced brickwork in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) complete including removing the debris out side MD land all as specified and as directed.

M &L providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concerete all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete including removing the debris out side MD land all as specified and as directed.

M&L for PCC 1:5:10 type E2 using 40 mm graded stone aggregate for filling mass concrete as in sunken floor complete all as specified and as directed.

Rendering 15 mm thick on stone masonry, brick work or concrete surface in cement mortar 1:3 using WPC 3% by weight of cement and finished smooth and even without using extra cement for sunken floor treatment complete all as specified and as directed. (Note :- WPC shall be paid separately as supply only by appropriate item)

APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric laid on primed surface(bituminus oil based primer confirming to IS [email protected] lit/Sqm) by torched application on floor, followed by a coat of blown bitumen of grade 85/25 or 90/15 @ 1.2Kg/Sqm each at top and bottom of the membrane complete including sealing all joints by thermo fusion with minimum 10 cm side overlap and 15 cm end overlap and applying one coat of aluminium paint at the rate of 100 grams/per sqm all as per manufacturer's instructions complete all as specified and directed. Note :- The work to be carried out in small patches in toilet & bath. No extra payment shall be made on this account).

Supply only Integral water proofing compound complete all as specified and as directed.

M&L for PVC (SWR) multi floor trap , plain with SS grating including jointing with solvent cement all as specified and as directed.

S&F anodised aluminium frame, for door, windows, ventilators sliding windows, runner & packing with rubber gasket etc, with one or more rebates including joinning cleat for rebates including joining cleats for fixing etc, complete all as specified & directed by Engineer-in-Charge.

S & F anodised aluminium window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron) , sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, roller ,locking arrangements etc. complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L point wiring with1. 5 Sqmm PVC insulated unsheathed multistranded single core copper conductor cable in PVC casing capping incl modular type steel sheet pressed terminal box (surface mounted ) with 2mm hylium thick sheet incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire .

(a) One light point controlled by one switch

(b) One socket oulet 5Amps on same board

(c) One socket oulet 5Amps on indepndent board

All as per item No 106 here in before but for socket outlet 15 Amps on independent board with cable size of 4 sqmm and earth continuity conductor cable of size 4 sqmm. Make- Polycab/Finolex/Havells

S&F switch piano flush type single pole one way 5/6 Amps. Make : Anchor /Havells/ Kinjal.

S&F socket outlet 5 pin 5/6 Amps flush type multipurpose complete . Make : Anchor /Havells/ Kinjal.

S&F of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge . Make : Anchor /Havells/ Kinjal.

S&F socket outlet 2 in 1, 3 pin 6/16 Amps flush type Make : Anchor /Havells/ Kinjal.

S&F ceiling rose surface tpe 3 terminals to be fixed on PVC block Make : Anchor /Havells/ Kinjal.

M & L for sub main wiring (surface) complete with Two single core 06 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable & one single core of 4mm FRLS PVC insulated (drawn through in and including 20 mm dia PVC conduit pipe accessories including elbow , tee )one single run of 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete all as specified and directed by EIC. Make- Polycab/Finolex/Anchor

Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen (NOM) 2000 with all accessories all as specified and directed by Engg-in-Charge. Make: Bajaj catalogue No. BCLSB 20W WH or equivalant of Wipro and Bajaj

Supply and fixing surface & wall mounted LED batten 2feet with extruded aluminium housing and robust construction 18 W system lumen (NOM) 2000 with all accessories all as specified and directed by Engg-in-Charge. Make: BAJAJ catalogue No.BCLSB 10W WH or equivalant of Wipro and CG

S&F LED Bulkhead light fitting 10Watt colour temprature cool white warm white housing high pressure die cast aluminium high pressure die cast front cover poly carbonatye front diffuser glass front cover acrylic front cover Make- BAJAJ cat part No BIBWP 10 LED OR equivalant to Wipro/CG

Supply and fix Exhaust fan 300mm metal body 1400 RPM single phase 230 volt air delivery 1300CMH complete all as specified and directed including dismatling old one deposit to AGE E/M Yard complete.Make- Bajaj product code 70046 /CG/Havells

OM CONSTRUCTIONS

Varsha Enterprises