PROVN OF TOILET BLOCK FOR STUDENTS AT BAYONET SCHOOL AND PROVN

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.

M&L for PCC (1:4:8) type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etc complete all as specified and directed

M & L for high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed.

M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and directed.

M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and directed

M&L RCC M-25 (Nominal Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Returing, filling in trenches, incl spreading, levelling, watering and well ramming in layers not exc 25 Cm in soft/loose soil complete all as specified and directed.

M&L sand filling under floor (obtain from excavation) including waterring and consolidaion complete all as specified and directed.

Removing excavated material (soil) to a distance not. exc. 50 mtr and depositing where directed at a level nexc 1.5 mtr above the starting point.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and directed

M&L RCC M-20 (nominal Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor (1:6)., etc complete all as specified and directed.

M & L for brick work with sub class 'B' modular bricks, straight or curved on plan to any radius built in CM 1:6 in half brick thick walls complete all as specified and directed.

M & L for use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc complete all as specified and directed

M&L RCC M-20 (nominal Mix) using 20 mm graded stone aggr as in beams, bands, cantilvers, bressummers, linters, chajjas, etc over 1.5m span etc complete all as specified and directed

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc complete all as specified and directed.

M&L RCC M-20 (nomilnal Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and directed

M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L plain cement concrete (1:4:8), type D-2 ( using 40mm graded stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed .

M & L 25mm thick cement concrete (1:2:4 ) type B-0, (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed.

M&L plain cement concrete (1:3:6), type B1( using 20mm graded stone aggregate) 75mm thick as in plinth protection including joints filled by filler compound complete all as specified and directed .

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on other than fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound to be measured paid separately)

M&L for rendering 10mm thick in CM (1:4) on other than fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in ceiling CM (1:3) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and directed.

S&F fabricating powder coated aluminium frame work,door shutter ,windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F aluminium power coated window and ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed.

S&F 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed.

S & F for stainless steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or screws, wire staples, etc complete all as specified and directed.

S&F for door closer hydraulically regulated, designation no 2 universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg Aluminium (extruded section) body complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with partical board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.

S&F for 125mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long anodised aluminium handles, cast type complete all as specified and directed.

M & L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

S&F vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and directed.

S&F vitreous china wash hand basin,Table top patern white, incl fixed on new MS bracket, fixing of tap, waste coupling,fitting,waste pipe and union incl 15 mm bore pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F of PVC connections 15 mm size with PTMT of 450mm long complete all as specified and directed.

S&F of 75 mm dia of PVC floor trap plain with grating including jointing with solvent cement of outlet complete all as specified and directed.

S&F of 15 mm bore CP bib tap of fancy type with long shunk with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule fixed complete all as specified and directed.

S&F of Piller tap swan neck type for table top WHB chromium plated screwed down high pressure and screwed for iron pipe and fixed

S&F of 15 mm bore CP angle stop cock with wall flange complete all as specified and directed.

S&F of CP towel rail 600 mm long fixed with CP screws and wood cleats / rowel plug with wall complete all as specified and directed.

Supply and fixing of soap-dish chromium plated all as specified and directed.

S&F of GI tubing 15 mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and directed.

S&F of GI tubing 20 mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) tripple layer construction, ISI marked complete all as specified and directed.

S&F of 20mm bore dia stop valve cast copper alloy screwed down , high pressure with crutch or butter fly handle ,screwed both ends for pipe or for unions and fixed complete all as specified and directed.

S&F of ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.

S&F of 110mm bore PVC (SWR) pipes single socketed in any length with carefully prepare rubber ring joints (or solvent joint) fixed to walls / ceiling or laid in floor complete all as specified and directed

S&F of 75mm bore PVC (SWR) pipes single socketed in any length with carefully prepare rubber ring joints (or solvent joint) fixed to walls / ceiling or laid in floor complete all as specified and directed

S&F of 110mm size PVC (SWR) bends any radius complete all as specified and directed

S&F of 75mm size PVC (SWR) bends any radius complete all as specified and directed

S&F of 110mm vent cowl complete all as specified and directed

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of 150 mm bore pipes in cement concrete 1:3:6 type C-2 ( using 40 mm graded stone aggregate) after they are laid and tested complete all as specified and directed.

M&L for 150 mm bore salt glazed stone were (SGSW) drain pipe grade 'A' laid to slope in tranches and jointed in cement mortar (1:1) including necessary testing for ensuring teak proofing complete all as specified and directed.

M & L for cement concrete (1:2:4) type B-1 ( 20 mm graded aggregate) as in coping, bearing course, manhole/ drain channels etc in including necessary formwork complete all as specified and directed.

M&L for providing pre-cast cement concrete of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in cover slab set in CM (1:4) for manhole cover including formwork complete all as specified and directed.

Material and Labour for apply two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer on new surfaces complete all as specified and directed. Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b)Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

M & L for preparing new plastered surfaceof wall and ceiling and applying three coat of white wash complete all as specified and directed.

S&F of Vitreous China urinals, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F of Fe 410-W(Grade-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over 25mm thick sand cushion complete all as specified and directed. Note :- Sand for cushioning shall be measured and paid separetley.

M & L for water proofing treatment to roof and edges (Vertical or tapered ) etc. in following sequence (i) Properly cleaning and drying the surface (ii) laying APP based polymetric membrane minimum weight 3.5 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric(wt not less than 150 gms/sqm) with 100 mm over lap laid on primed surface by sealed and bonded to the surfaces by torchen method and applying Two coats of bitumen based aluminium painting on water proofing treatmen complete all as specified and directed. Note :- Sand for cushioning shall be measured and paid separetley.

S&F of Vitreous china wash down water closet pan (Padestal pattern), white complete incl seat and coverflush pipe incl all joints.

M&L for moorum / red bajri filling in floors or pavings, laid in layers nexc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 Cum, getting out, reterning filling and ramming earth or broken rubber mixed with earth around in layers not exceeing 25 cm, watering and removing surplus soil to a distance not exc. 50m and making good surface complete all as specified and directed.

S & F steel work in tubular/Rolled trusses,purlins,rafters,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge. Note: The pre-painted galvaluame aluminium zinc GI based profile pattern steel sheet should be TATA Blue Scope colourbond XRW or equivalent as approved by GE.

S & F Pre-painted galvalume aluminium zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge.

S&F for 1.25mm thick mild steel sheet eaves gutters of di 150mm, galvanised class 3, half round with rounded edges ,proper clamping to existing purlins,rafters,wall etc complete all as specified and as directed.

M&L in for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over 40mm thick sand cushion complete all as specified and as directed. Note:- The sand for cushioning shall be measured and paid seperately.

Supply & laying of sand for cushining under interlocking paver block as provided under item No 69 & 81 of BOQ.

M & L for Point wiring with FR LS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding galvanised boxes and bakelite sheet used for mounting switches, sockets, fan regulators etc for the following :-

(a) One light/ fan point controlled by one switch

(b)One 5amps socket out let point controlled by one switch on same board with other switches.

(c) One 5amps socket out let point on independent board controlled by one switch.

All as per item no 1 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

S&F socket outlet flush type 5 pin, 5 amps, 230 volts complete all as directed .

S&F switch piano flush button single pole one way 15 Amp 240 volt complete as directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed

S&F ceiling rose surface bakelite three terminal complete all as directed .

Supply and fix integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018/ Crompton Cat Pt No. LCTL-18-CDL/Bajaj Cat No. BCLSB18WH

Supply and fix integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed .Make:- Havells Cat No. LHEXBLP7IN1W009 /Crompton Cat Pt No. LCTL-9-CDL/Bajaj Cat Pt No. BCLSB10WH

M&L for Sub main wiring with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including not less than 25mm dia and all fittings like bends, tees, saddles etc including one run of FR LSPVC insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete

Supply and fix double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din rail complete all as specified and directed by Engr-in-Charge.

S & F MCB SPN 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

Supply & Fifing Exhaust fan of 300mm sweep, 230 Volts single phase, 900 RPM, complete with all accessories like nuts, bolts, louvers, shutters etc all as specified and directed by Engr-in-Charge. complete with all accessories like nuts, bolts etc etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified and directed by Engr-in-Charge. Make : Havells/Bajaj/Crompton

M/S GARG CONSTRUCTION

M/S Parikshit Sharma

PD GUPTA AND COMPANY

M/S UnitedConstruction

Sharad Enterprises