REPAIR AND PAINTING OF WOODEN FURNITURE (FD/TP/MAP) AT 7 AFH KANPUR CANTT

Amount

Chair writing ( FD 280,FD 202,FD 261, FD 148) :- Replacement of the following old damaged/ decayed parts of chair writing with new parts made of Ist class new teak seasoned wood complete all as specified and shown on drg and directed.

Front leg to Chair

Rear leg

Right or front or rear or Left rail of Seat with canning holes

Stiffener

Top Rail

Arm to Chair

M&L for preparation of chair writing old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as specified, shown in drgs and as directed.

Chair dinning ( FD 279 , FD 270, FD 262 ) :- Replacement of the following old damaged/ decayed parts of chair dining with new parts made of Ist class new (teak )seasoned wood Complete all as specified, shown in drgs and as directed.

Front leg to Chair

Rear leg to Chair

Right or front or rear or Left rail of Seats with canning holes

Stiffener

Back Rest stiffener

M&L for preparation of chair dining old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as specified, shown in drgs and as directed.

Chair Easy ( FD 229 ) :- Replacement of the following old damaged/ decayed parts of chair Easy with new parts made of Ist class new teak seasoned wood complete all as specified and shown on drg.

Front leg

Rear leg

Front, Rear, Side rail of seat with canning Holes

M&L for preparation of chair easy old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as specified, shown in drgs and as directed.

BED PLY WOOD TOP ( FD 246) ;- Dismantling of old U/S Existing ply wood top from Bed Ply Wood Top and S & F of new top 12 mm thick ply wood commercial face BWR Grade of same shape and size Complete all as specified, shown in drgs and as directed.

Dismantling of old U/S teak face ply wood 4 mm thick from Head Board and S & F new 4 mm thick one side teak face on both side of Head Board with 4 mm thick teak wood beading around the head board after repairing the complete head board Complete all as specified, shown in drgs and as directed.

All as per item No. 4.02 above But Foot board.

Removing of old U/S Leg of Bed Ply Wood top and S & F of new Leg made of seasoned sheesham wood to the same shape and size complete all as specified, shown in drgs and as directed.

Removing of old U/S long Rail of Bed Ply Wood top and S & F of new long rail made of well seasoned sheesham wood of same size and shape as per drg and as directed .

M&L for preparation of bed ply wood top old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as specified, shown in drgs and as directed.

TABLE BED SIDE ( FD 276) :- Taking out old unsevicable following components of table bed side as and where required from table bed side and S&F new components of existing shape and size all as specified, shown on drawing and directed

Side made of 18mm thick veneered teak face particle board exterior grade

Top made out of 18mm thick veeneared teak face particle board exterior grade with 1.5mm thick plastic laminated sheet on top

Bottom made out of 18mm thick veneered teak wood particle board, exterior grade

Shelf made out of 12mm thick veneered teak face particle board, exterior grade

Back ply 6mm thick plywood, BWR grade, commercial type

Removing of U/S knob from table bed side steel and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

M&L for preparation of table bed side old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed:- Make : Berger/Asian/Shalimar.

Table dressing ladies with Mirror (FD 251)& Table dressing ladies without mirror & stool (D/E6/MAP-II/07) :-Taking out following old U/S component of table dressing ladies as and where required and S&F of new components of existing shape and size as specified, shown on drawing and direct

Top made of 18mm thick prelaminated particle board exterior grade, one side decorative with 3mm thick teak wood beading all around.

5.5mm thick mirror on 6mm thick plywood commercial type at back

Drawer with front of 18mm thick prelaminated particle board, exterior grade, one side decorative other sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

Cushion of size 315 x 365mm and 40 density covered with leatherite as specified.

Ply of size 315x365mm x12mm thick openable shutter as specified .

M&L for preparation of Table dressing ladies with Mirror (FD 251)& Table dressing ladies w/m & stool old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as specified, shown in drgs and as directed.

TABLE DRESSING GENTS (FD 230 );- Taking out following old U/S component of table dressing gents as and where required and S&F of new components of existing shape and size all as specified on drawing and directed with following components:-

5.5 mm thick mirror over 6mm thick plywood commercial type at back

Drawer with front of 18mm thick prelaminated particle board, exterior grade, one side decorative other sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade

Top made of 18mm thick prelaminated particle board exterior grade, one side decorative with 3mm thick teak wood beading all around.

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

M&L for preparation of Table dressing gents old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as specified, shown in drgs and as directed.

TABLE CENTRE ( FD 274) :- Taking out following old U/S parts of table centre as and where required and S&F of new components of existing shape and size all as specified on drawing and directed with following components:-

Top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed .

Leg of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge.

All as per item No 8.02 here in before but short rail.

All as per item No 8.02 here in before but long rail.

All as per item No 8.02 here in before but stiffener.

M&L for preparation of Table center old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as specified, shown in drgs and as directed.

Table 3'x2' with and w/o drawer ( FD 224 , FD 231, FD 283 , FD 284 ):- Taking out following old U/S parts of Table 3'x2' with and w/o drawer as and where required and S&F of new components of existing shape and size all as specified on drawing and directed with following components:-

Top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge

Leg of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge.

All as per item No 9.02 here in before but short rail.

All as per item No 9.02 here in before but long rail.

Drawer as per existing shape & size made out of well seasoned teak wood and 6mm thick plywood consisting 3 Nos of ply on the bottom of the drawer complete all as specified & shown on drgs.

All as per item No 10.02 here in before but stiffener.

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

M&L for preparation of Table 3'x2' with and w/o drawer old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as specified, shown in drgs and as directed.

Table peg ( FD 277 ) :- Taking out following old U/S parts of Table peg as and where required and S&F of new components of existing shape and size all as specified on drawing and directed with following components:-

Top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge

Leg of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge.

All as per item No 10.02 here in before but side rail.

All as per item No 10.02 here in before but stiffener.

M&L for preparation of Table peg old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.

Table Writing (FD 249 ) :- Taking out following old U/S parts of Table Writing as and where required and S&F of new components of existing shape and size all as specified on drawing and directed with following components:-

Top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge

Stiffener made of seasoned sheesham wood as per drawing and directed by Engr-in-charge

Drawer of 18mm thick prelaminated particle board exterior grade one side decorative and bottom with 6mm thick plywood commercial grade complete all as shown in drg and directed by Engr-in-Charge.

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

M&L for preparation of Table Writing old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.

Teapoy (FD 284 ) :- Taking out following old U/S parts of Teapoy as and where required and S&F of new components of existing shape and size all as specified on drawing and directed with following components:-

Top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge

Leg of seasoned sheesham wood same shape & size and directed by Engr-in-Charge

All as per item No. 12.02 here in before but side rail

All as per item No.12.02 here in before but stiffener

M&L for preparation of Teapoy old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.

Table Dining 6 Pers/8 Pers ( FD 378) :- Taking out following old U/S parts of Table Dining 6 Pers/8 Pers as and where required and S&F of new components of existing shape and size all as specified on drawing and directed :-

Top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge

Leg of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge.

All as per item No. 13.02 but new short rail.

All as per item No.13.02 but new long rail.

M&L for preparation of Table Dining 6 Pers/8 Pers old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.

Side board( FD 1112 ,FD 241,FD 371):- Taking out following old U/S parts of Side board as and where required and S&F of new components of existing shape and size all as specified on drawing and directed :-

Door made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 4mm thick teak wood beading all-round the top all as specified on drawing and directed.

Side made of 18mm thick prelaminated particle board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing and directed.

Plywood 6mm thick, BWR grade, commercial all as specified on drawing and directed .

Top board made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed.

Bottom board made of 18mm thick, prelaminated prarticle board, extrerior garde both face white laminated complete all as specified on drawing and directed

Drawer to be made of 12mm thick, well seasoned sheesham wood planks and 6mm thick commercial ply at bottom of drawerscomplete all as specified on drawing and directed.

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

M&L for preparation of Side board old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed:-

Book case (FD 234) :- Taking out following old U/S parts of Book case as and where required and S&F of new components of existing shape and size all as specified on drawing and directed :-

Door made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed.

Side made of 18mm thick prelaminated particle board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing and directed

Back Plywood 6mm thick, BWR grade, commercial all as specified on drawing and directed

Top board made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed.

Bottom board made of 18mm thick, prelaminated prarticle board, extrerior garde both face white laminated complete all as specified on drawing and directed

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

M&L for preparation of Book case old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.

Sofa set 5 seated /sofaset 4 seated :-Taking out following old U/S parts of Sofa set 5 seated /sofaset 4 seated as and where required and S&F of new components of existing shape and size all as specified on drawing and directed.

Leg to be made of seasoned sheesham wood same shape and size as specified and directed by Engr –in-Charge

All as per Item No.16.01 above but rear leg

All as per Item No. 16.01 above but Arm

All as per Item No. 16.01 above but Batten

Cushion foam 22”x21”x4” (U Foam) 32 density of & covered with cloth tapestry as per sample Kept in Furniture Yard approved by GE (Cost of tapestry cloth not less than Rs 240/- per meters) all as specified and directed by Engr-in-Charge.

M&L for preparation of Sofa set 5 seated /sofaset 4 seated old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed:-

LOCKER BED SIDE ( FD 54, FD 222 DB 4064 ):- Taking out following old U/S parts of LOCKER BED SIDE as and where required and S&F of new components of existing shape and size all as specified on drawing and directed.

6 mm thick ply wood commercial on back of locker bed side rest all as per drg and directed by Engr-in-Charge.

Door made of 18 mm thick block board phenol formaldehyde bonded of locker bed side rest all as per drg and with 4mm thick teak wood beading alround and directed by Engr-in-Charge.

Seasoned sheesham wood leg to the locker bed side rest all as per drg and directed by Engr-in-Charge.

Aluminium handle 100mm with steel screw rest all as per drg and directed by Engr-in-Charge.

S & F new hinges MS cromoium plated (piano)type door hinges with steel screw to doors of locker bed side rest all as per drg and directed by Engr-in-Charge.

Seasoned sheesham wood bracket & hanging rod of 18/19 mm dia conduit MS Chromium plated pipes to locker bed side rest all as per drg and directed by Engr-in-Charge.

Hasp & staples aluminum 75 mm long with steel screw to lockers doors rest all as per drg and directed by Engr-in-Charge.

Side of locker to be made of 18 mm thick block board phenol formaldehyde bonded commercial of locker bed side rest all as per drg and directed by Engr-in-Charge.

Top to be made of 18 mm thick block board phenol formaldehyde bonded commercial one side teak face and other side commercial rest all as per drg and and covered with 4mm thick teak wood Beading alround and directed by Engr-in-Charge.

Bottom to be made of 18 mm thick block board phenol formaldehyde bonded commercial one side teak face and other side commercial rest all as per drg and and covered with 4mm thick teak wood Beading alround and directed by Engr-in-Charge.

M&L for preparation of locker bed side old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.

Almirah Large/Med with shelves wooden ( DB 3941 & 3942):-Taking out following old U/S parts of Almirah Large/Med with shelves wooden as and where required and S&F of new components of existing shape and size all as specified on drawing and directed.

Shelf of almirah large/Med wooden made out of teak wood all as per drawing and directed by Engr - in - charge

Top of almirah large/med wooden made out of new teak wood all as per drawing and directed by Engr-in -charge

Base complete with legs all as per drawing and directed by Engr-in -charge

M&L for preparation of Almirah Large/Med with shelves wooden old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.

Chair all type- Recanning of chairs CBA/CBB wooden and chair bin soiled linen, chair Easy, Chair dining, Chair writing etc with 2mm wide new plastic cane and 0.4mm thick cream/white half round seat and back and border to be covered with 3 to 4 mm wide ½ round cane complete all as specified and shown in drawing.

GUJRAL BUILDERS

ANAND FURNITURE