REPAIR REPLACEMENT OF STREET SECURITY LIGHTS POST TOP LANTERNS LAND SCAPE ROAD WAY LUMINARARIES TIMER PANELS HIGH MAST LIGHTS FENCING CHANNELS AND OTHER CONNECTED MISC WORKS AT MAP OFFRS QSS HILL VIEW AAD COLLEGE ARO AREA AAD CENTRE 28 AD REGT STATI

Amount

Excavation in post holes (or similar holes) each not exceeding 0.50 cum, in soft/loose soil, getting out, returning filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering or removing surplus soil to a distance not exceeding 50 m & making good surface. Complete all as specified & directed.

M&L plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete. Complete all as specified & directed.

M&L for Providing Reinforced Cement Concrete Type B-1, 1:2:4 (using 20 mm graded aggregate) in precast posts, fencing post, straining or terminal posts, struts etc. for fencing average sectional area n exc. 100 sq cm, with or without chamfered angles & flat, splayed, rounded or mitred top as directed & fixed including necessary formwork if required. Complete all as specified & directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165). Complete all as specified & directed.

M&L for TMT Bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Complete all as specified & as directed.

M&L for TMT Bars 5 mm dia & over upto & including 10 mm dia in stirrups, spaces & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Complete all as specified & as directed.

S&F angle iron posts and rails,drilled and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described & apply two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer. Complete all as specified & as directed.

M&L for preparation of new or previously untreated surfaces of any description, n exc 10 cm in width or girth when unconnected with other painting or when painted in a different tint & apply two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer. Complete all as specified & as directed.

Supply only PVC Coated chain link of 3.16 mm dia Mild steel galvanised fencing of mesh size 100 mm x 100 mm as per IS:2721-1979 weight not exceeding 4.00 Kg per sqm. complete all as specified & directed.

Fixing only PVC coated chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire. Complete all as specified & as directed.

Dismantling of chain link fencing of any type & size complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling posts or struts (wood,steel or R.C.C) any section, including taking out embedded portion and making good natural ground disturbed ground.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails braces, etc, conforming to Fe-290 Gde Fe-165 complete, drilled for fixing of steel sheeting or other covering Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastering and fixing complete all as specified & directed.

M&L plain cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in coping & like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work complete all as specified & directed.

Excavation in trenches in soft / loose soil, not exceeding 1.5 metre wide & not exceeding 1.5 metre deep; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan including getting out, complete all as specified & directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling & mass concrete. Complete all as specified & directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. Complete all as specified & directed.

Removing surplus excavated material (soil) to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point, including spreading. Complete all as specified & directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan exceeding 6m mean radius built in 1:6 cement mortar. Complete all as specified & directed.

Demolition of brick work built in cement mortar or cement mortar or cement lime mortar including all quoins, arches, pillars etc.

M&L 15mm plaster in one layer in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. Complete all as specified & as directed.

M&L for preparation of newly plastered wall surfaces & providing 02 coats of cement based paint over & including 01 coat of priming plastered & other surfaces with alkali resistant priming paint. Complete all as specified & directed.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described & apply one coat of synthetic enamel paint (ordinary tint). Complete all as specified & directed.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for. Complete all as specified & directed.

M&L for Hardcore of broken stone or boulders of guage n exc. 63 mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface. Complete all as specified & as directed. .

S&F Rubber Moulded machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment. Complete all as specified & directed.

M&L for Sand filling under floors or in foundations including watering & consolidation. Complete all as specified & directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured). Complete all as specified & as directed.

All as per item No 31 above but fixing only of old Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) fixed in proper as per layout.

Taking down Galvanised steel barbed wire 2.24mm dia. complete all as specified & directed.

Taking down concertina coil of 1050mm dia in stress position not deep and aligned steel wire coated with CIR anti corrosive paints.

M&L for concertina coil of 1050mm dia in stress position not deep and aligned steel wire coated with CIR anti corrosive paints making diamonds shape with the help of dove tail clips (18 SWG ) fixed over barbed wire with the angle iron, the concertina coil is to be fixed with barbed wire at points where coil touched the bottom points where coil touched the bottom barbed wire with the help of lug rings (24 SWG) complete all as specified and directed. Make-Indian quality product Zone/Rashtriya Ispat/Global Techno Pvt Ltd/Suraksha Industries/Shakti Industries.

All as per Item No 35 abovebut fixing only of old coil fixed in proper as per layout.

M&L for plastic coated PCC chequered tile of size 250 x 250 x 18 to 20mm set and jointed in neat cement slury and pointed in white or coloured cement to match over 20mm thick screed bed in cm 1:6.

Checking of street/security lights breakdown maint of overhead lines/9 mtr pole/swan neck poles by checking out the cables/carbon removel /connectors/mcbs etc and locating the fault and replacing with necessary cables for jumpers/ clamps & connectors/terminal box etc, making good, cleaning and lubricating the parts etc complete all as specified and directed : Note 1: quoted rate inclusive of vehicle with ladder and manpower job card received from power house and after completion of work job card return to power house. Note 2 Drivers/PCBs/cables/fittings/terminal box/ disc/pin insulators, are measured and paid separately under relavent items

Supply and fix in replacement of Driver for 45W LED fittings complete all as specifed and directed Make : C&S / Havells/ HPL/ Sysca

Supply and fix in replacement of Driver for 20/25W LED fittings complete all as specifed and directed Make : C&S / Havells/ HPL/ Sysca

Supply and fix in replacement of PCB for 45watts street light fittings with lens complete all as specified and directed : Make : C&S / Havells/ HPL/ Sysca

Supply and fix in replacement of MCPCB for 20/25 watts street light fittings with lens complete all as specified and directed : Make : C&S / Havells/ HPL/ Sysca

Supply and fix in replacement of Timer panel, made of MS Enclosure factory made consisting digital timer 24 hour set up with contactor rating65 Amps TP of max load 12 KW complete with fixing arrangemetns on MS Channel of suitable size and necessary PCC Wk complete all as specified and as directed.

M&L for taking down the motorised / manual High Mast Lights circular grid accomodating MH/MV light fittings any cap over a ht of 15 mtr to the ground, taking aside, replacing the unsv control gears/ light fittings with LED fixtures and raising back to its original position upto 15 mtr etc complete all as specified and directed (Rates quoted shall be incl of replacing required accessories where specifically not mentioned but required to complete the Job except LED fixtures)

S & F in replacement of direct type LED retrofit lamp in street light fittings 40 watt 2500 lumen output, 6500 K colour temp complete all as specified and directed. Make: C&S/Havells/HPL/Sysca

S&F in replacement Anologue electro mechanical timer 24 hrs minimum setting 30 minutes for daily working contact rating 16 Amps, 240 Volts, AC with initial charging, battery backup having supply reserve failure complete all as specified and directed Make : C&S / Havells/ HPL/ Sysca

Supply and fix in replacement of automatic modular contactor with manual override , 40 Amps 3P 50HZ suitable for timer switch of street light complete all as specified and directed Make : C&S / Havells/ HPL/ Sysca

Surface dressing n.exc 30 cm deep and average 15 cm deep and getting out in any type of soil around the timer/ elect panel boards complete all as specified and directed.

S&F 40mm bore GI tubes medium grade galvnised with all fittings, laid in frenches complete all as specified and directed.

Boring of holes horizontally for laying of 40mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve including taking out existing unserviceable cable complete all as specified and directed for cable size 10 sqmm x 2.0 core: - Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items ( Make:- Havells / polycab / cci / nicco / Gloster)

All as per itme No 14 above but for 16 sqmm x 2.0 core

All as per itme No 14 above but for 16 sqmm x 4.0 core

All as per itme No 14 above but for 25 x 3.5 core

S&F in replacement of pre-stressed concrete pole, 09 mtr long class-10, conforming to IS-1678 of size 102 x 152 mm at top and 102 mm x 289 mm at bottom in true vertical position including dismantling of existing unserviceable PCC pole complete all as specified and directed. Note : Excavation , earth work & PCC for foundation shall be measured and paid separately

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in pole foundation complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in pole coping including necessary form work for fair finish surfaces complete all as specified and directed

Restringing of old ACSR or AAAC conductor of any size and make on Lt 9 mtr long poles including earth wire, replacement of binding wire and aluminium taps reconnection, street light connections, service connections and binding to insulators with suitable size of new binding wire including prunning of tree branhes 2 mtr all around OH LT line complete all as specified and directed. (04 Nos of ACSR or AAAC conductor shall be measured as one unit length )

M&L of earthing complete with galvanised iron strip 32mm x 6mm and galvanised iron earth plate electrode 600x600x6mm thick, burried directly in ground(earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 2.25 meters below normal ground level, connected to galvanised earth lead wire 32x6mm dia by means of bolts, nuts, check nuts and washers of GI or steel and GI pipe 'L' grade of 40mm dia for protection of earth lead and 20mm dia GI pipe 'M' grade for watering with wire wash funnel etc as shown in electrical plate No. 3 of SSR part - I (2009) connected to earthing test point complete all as specified and indicated including testing on completion as per IE rule.

S & Fix in replacement of PVC cable aluminium stranded conductor 1100V grade 10 sqmm x 2.0 core complete all as specified & directed.

S&F in replacement of Old unsv cable loop box with PVC box of size 280 x 170 x 130mm incl 6 amps MCB fixed on pole incl necessary clamps, bolts, nuts complete all as specified and directed (Syntex/hensel)

Supply and spreading 40mm graded stone aggregate complete all as specified and directed.

M&L for writing of numbers and words (not more than 10 characters) on existing steel / PCC poles with synthetic enamelled paint of any size in 30 cm wide strips alternatively black and white on existing surface including white washing on PCC coping of poles complete all as specified and directed.

M&L in repair stringing and fixing of ACSR conductor including binding to insulator with suitable size of binding wire, size of conductor (a) squireel 6/1 x 2.11 (b) weasel 6/1 x 2.59 © Rabbit 6/1 x 3.25 conforming to IS - 398 part -4 of 1994 including taking out existing u/s conductor complete all as specified.

M&L stay assembly comprising of 7/ 8 SWG galvanised stay of standard wire of reqd length fixed to pole with and including galvanised flat iron clamps, bolts, nuts and washers etc including galvanised steel 14 mm dia, 400 mm long stay bow and GI stay plate of size 300 x 300 x 6 mm thick, thimble MS clamp made out of 50 x 6mm and loop insulators porcelain brown complete all as shown in EP No.1 of SSR part - I including all accessories and excavation, earth work and PCC work complete all as specified and directed.

M&L in repair of pin type porcelain vitreous insulator white, brown or green including one GI mild steel spindle, GI nuts and washers etc of size 100 mm height and 65 mm dia, 1100 volts grade including taking out existing U/S insulator complete all as specified and directed..

M&L in repair of shackle type insulator porcelain vitreous 100 mm height and 115 mm dia brown colour for working pressure 1100 voltscomplete with GI strap &bolt including taking out existing u/s insulator complete all as specified and directed.

Supply and fixing in replacement MCCB fixed type 4 pole 415 volts of capacity 100 amps 16 KA complete all as specified and directed. Make Standard/ Havells/ L & T / MDS/Legrand/HPL

Supply and fixing in replacement On load change-over switch 4 pole 415 volts of capacity 100amps with enclosure complete all as specified and directed. Make Standard/ Havells/ Indo-asian/Legrand/HPL

Supply and fixing in replacement of load change-over switch 4 pole 415 volts of capacity 200amps with enclosure complete all as specified and directed. Make Standard/ Havells/ Indo-asian/Legrand/HPL

S&F in replacment of decorative garden/lawn lights made of high grade polycarbonate meterial suitable for retrofit LED Bulb 15 Watts cap, moutable on pole of max dia 60mm complete incl necessary making good arrangemetns to suit the existing complete all as specified and directed (Rate to be incl of LED Bulb and modificaions)

Supply and fix street light fitting LED type of 45 watt New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic dirver complete all as specified and directed.

Supply and fix street light fitting LED type of 30 watt New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic dirver complete all as specified and directed.

Supply and fix post-top lantern 25 watt ruby clear energy saving, environmental friendly, long life aesthetically designed with IP 65 symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed. make : Havells cat part No RUBYPT25WLED757PSYMTOPC or equivalent of Bajaj/CG

M&L in replacement of LED flood lights of cap 120 W cap D-clamp fitting of powder coatedpressure die cast aluminium High power LED with heat resistant toughed glass with connected accessories complete all as specifed and directed (Make syska/hPL/Havells/C&S)

M&L in repair mild steel work for Cross arms, /angle supports bracings, supports, clamps and black plates fabricated from structural steel section including nuts, bolts, washers, welding ,bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including taking out existing u/s MS work complete all as specified and directed.

M&L for Danger notice plate made of sheet molding composite (SMC) with red white with letters figures and conventional skull and in bones in signal red colour of size 150 x 200 mm and fixed with GI clamps bolts and nuts for 415V/LV Installations complete all as specified and directed

Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out for taking out / laying of cable complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable and necessary fillings in the yards/ cable ducts etc complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.

Supply and laying flyash building bricks laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and directed.

Prunning of tree not exc 10mm girth including cutting of trunk branches & stacking of servicerable meterial and disposal of UNSV materials to a disatnce not exc 50 mtrs & clearing site complete all as specified and directed

Prunning tree not exc 15mm girth including cutting of trunk branches & stacking of servicerable meterial and disposal of UNSV materials to a disatnce not exc 50 mtrs & clearing site complete all as specified and directed.

Prunning of tree not exc 20mm girth including cutting of trunk branches & stacking of servicerable meterial and disposal of UNSV materials to a disatnce not exc 50 mtrs & clearing site complete all as specified and directed.

Prunning of tree not exc 25mm girth including cutting of trunk branches & stacking of servicerable meterial and disposal of UNSV materials to a disatnce not exc 50 mtrs & clearing site complete all as specified and directed.

Preparing external/internal surfaces of the panel boards/Feeder pillar boxes , consoles etc by scrubbing /CTC by emary paper by removing stains/rusted scales etc and applying two coats of synthetic enamel paint complete and cleaning the meters/indicators / MES Nos etc complete all as specified and directed.

S & Fix in replacement of flat /round 3 core copper conductor PVC insulated & PVC Sheathed cable , 1100V grade complete all as specified & directed (Havells/RR KABEL/HPL/Anchor)

Supply & fix PVC conduit pipe 20mm dia with fixing arrangement with flat iron with nut bolts on pole complete all as specified & directed.

M&L for painting of LT steel tubular pole swaged/steel /Swan neck poles of 9/11 mtr height with and including cross arms, MS clamps nuts, bolts, height from 1.5 mtr from coping to top of pole including preparation of iron surface and applying with single coat of aluminium paint on existing surface complete all as specified and directed.

M&L for painting of LT pole PCC/RCC poles of 9 mtr height with and including cross arms, MS clamps nuts, bolts, height from 1.5 mtr from coping to top of pole including preparation of iron surface and applying with single coat of aluminium paint on existing surface complete all as specified and directed.

M/s Ats Electricals

M/S JAGANNATH SASMAL

M/S S.K GHOSE

ABC CONSTRUCTION COMPANY

M/s Bapujee Builders and Traders

M/S. KISHAN ENGINEERING

M/S SIWALIK AND CO

R J ENTERPRISES

DHABALESWAR ENGINEERING WORKS