General Electrification work of "new station building & platform of Pilibhit station" as per revised master plan and Yard remodeling of Pilibhit station of Izzatnagar Division of NE Railway.

bus coupler) - 01Nos, multifunction Meter-1 set, Indication lamp R,Y,B (LED) (iii) Outgoing: 200A 4 pole MCCB -03 Nos, 125A 4 pole MCCB -02 Nos, 100A 4 pole MCCB -03 Nos, 63A 4 pole MCCB -04 Nos, Indication lamp R,Y,B (LED) Breaking capacity. 25KA for rated current >100A and 10KA for lesser rated current. LT Panel shall be Confirming to IS-60947 and IS/IEC 61439 Part-1, Part-2, Part-3 & Part- 5 as applicable and it shall be equipped with inbuilt control supply Power Pack (UPS with 15Ah Battery), complete in all respect. LT Panel should be manufactured by switchgear OEM or its authorised system house for panel manufacturing, only. (LTP-4) Above/ SS03 b 2.00 Numbers 327150.26 654300.52 AT Par 654300.52 Below/P ar IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Design, Supply, installing, testing & commissioning of LT distribution panel with

thick, re-enforcement with 2.5mm thick members and channel arranging rakes and shelves of suitable size (ii) Incomer: MCCB 250A, 4 Pole, 25KA-02 Nos, 150Amp. MCCB (as interconnected Bus coupler) 4pole - 01No, multifunction Meter-1 set, Indication lamp RYB (LED) (iii) Outgoing: MCCB 200A, 4 Pole, 25KA-01 No, MCCB 100A, 4 Pole, 25KA-02 Nos, 63A 4 pole MCCB -05 Nos, 40A 4 pole MCCB -01 No, 32A 4 pole MCCB -02 Nos, Indication lamp RYB (LED) Breaking capacity 25KA for rated current >100A and 10KA for lesser rated current. LT Panel shall be Confirming to IS-60947 and IS/IEC 61439 Part-1, Part-2, Part-3 & Part- 5 as applicable and it shall be equipped with inbuilt control supply Power Pack (UPS with 15Ah Battery), complete in all respect. LT Panel should be manufactured by switchgear OEM or its authorised system house for panel manufacturing, only. (LTP-5 & LTP-6). Above/ SS06 b 1.00 Numbers 297195.56 297195.56 AT Par 297195.56 Below/P ar Description:- Design, Manufacturing, supply, installation, connecting & commissioning of cubical type LT. Switch Board Distribution panel fabricated with CRCA sheet of thickness minimum 1.6 mm with 9 tank process powder coated CPRI approved specification, IP-44. Supply, fixing, testing & commissioning of suitable main TPN copper bus bar 400 Amp in the panel including supply & fixing of CT's and sub copper bus bar to connecting outgoings MCCB to main copper bus bar of suitable size with aluminium lugs of all incoming side. All MCCBs with outgoing cable will be connected with aluminium lugs through cable glands, wiring of meter & indication lamp etc., as per required with suitable size of copper conductor cable. (Note: The following material will be Supply, fixing &

main MCCB 320Amp., 04 pole, 35 KA - 01 No. 2. Outgoing MCCB 100 Amps, 04 poles,35 KA 02 No. 3. Outgoing MCCB 200 Amps, 04 poles,25 KA 01 No. 4. Outgoing MCCB 63 Amps, 04 poles, 25 KA 05 No. 5. Outgoing MCCB 32 Amps, 04 poles, 25 KA 01 No. 6. Outgoing MCCB 40 Amps, 04 poles, 25 KA

as per IEC 61036, three phase voltage, current, frequency, PF, kW, kVA, kVAR, kWh, kVAh, kVARh with communication, two output contact for trip, optional RS485, Auxiliary Supply: 85 300V AC/DC, Rated Current: 5Amp, Frequency Measurement: 20-200 Hz as per requirement and instruction of site engineer. 8. RYB LED Indication lamps for incoming & outgoing feeders as per requirement and instruction of site engineer. LT Panel shall be Confirming to IS-60947 and IS/IEC 61439 Part-1, Part-2, Part-3 & Part- 5 as applicable and complete in all respect. LT Panel shall be manufactured by switchgear OEM or its authorised system house for panel manufacturing. (LTP-7). Above/ 1077267.0 SS06 c 1.00 Numbers 1077267.09 AT Par 1077267.09 Below/P 9 ar Description:- Design, Manufacturing, supply, installation, connecting & commissioning of cubical type LT. Switch Board Distribution panel fabricated with CRCA sheet of thickness minimum 1.6 mm with 9 tank process powder coated CPRI approved specification, IP-44. Supply, fixing, testing & commissioning of suitable main TPN copper bus bar 1000 Amp in the panel including supply & fixing of CT's and sub copper bus bar to connecting outgoings MCCB to main copper bus bar of suitable size with aluminium lugs of all incoming side. All MCCBs with outgoing cable will be connected with aluminium lugs through cable glands, wiring of meter & indication lamp etc., as per required with suitable size of copper conductor cable. (Note:- The following material will be Supply, fixing &

Incoming main ACB 1000 Amp., 04 pole, 50 KA, MDO Draw out type, microprocessor based - 02 No. (2) 630 Amps ACB (as bus coupler), 04 poles, 50 KA - 01 No. (3) Outgoing MCCB 400 Amps, 04 poles,

Accuracy class -1.0 as per IEC 61036, three phase voltage, current, frequency, PF, kW, kVA, kVAR, kWh, kVAh, kVARh with communication, two output contact for trip, optional RS485, Auxiliary Supply: 85-300V AC/DC, Rated Current: 5Amp, Frequency Measurement: 20-200 Hz - 10 No. (7) RYB LED Indication lamps for incoming & outgoing feeders - 30 No. All ACB, MCCB & COS shall be of reputed make. LT Panel shall be Confirming to IS-60947 and IS/IEC 61439 Part-1, Part-2, Part-3 & Part- 5 as applicable and it shall be equipped with inbuilt control supply Power Pack (UPS with 15Ah Battery), complete in all respect.LT Panel should be manufactured by switchgear OEM or its authorised system house for panel manufacturing, only. (LTP-1). Above/ SS06 d 1.00 Numbers 261677.35 261677.35 AT Par 261677.35 Below/P ar IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Design, Manufacturing, supply, installation, connecting & commissioning of cubical type LT. Switch Board Distribution panel fabricated with CRCA sheet of thickness minimum 1.6 mm with 9 tank process powder coated CPRI approved specification, IP-44. Supply, fixing, testing &

of CT's and sub copper bus bar to connecting outgoings MCCB to main copper bus bar of suitable size with aluminium lugs of all incoming side. All MCCBs with outgoing cable will be connected with aluminium lugs through cable glands, wiring of meter & indication lamp etc., as per required with suitable size of copper conductor cable. (Note: The following material will be Supply, fixing & connecting in the cubical type LT switch board panel including testing & commissioning) (1) Incoming COS 200Amp. TPN - 01 No. (2) Outgoing MCCB 100 Amps, 04 poles,35 KA- 02 No. (3) Outgoing MCCB 63 Amps, 04 poles, 25 KA- 05 No. (4) Outgoing MCCB 32 Amps, 04 poles, 25 KA- 02 No. (5) Outgoing MCCB 40 Amps, 04 poles, 25 KA- 01 No. (6) Supply & fixing of LED Multifunction Meter conforming to IEC 62053-21, Accuracy class-1.0 as per IEC 61036, three phase voltage, current, frequency, PF, kW, kVA, kVAR, kWh, kVAh, kVARh with communication, two output contact for trip, optional RS485, Auxiliary Supply: 85 300V AC/DC, Rated Current: 5Amp, Frequency Measurement: 20-200 Hz as per requirement and instruction of site engineer. (7) RYB LED Indication lamps for incoming & outgoing feeders as per requirement and instruction of site engineer. LT Panel should be manufactured by switchgear OEM or its authorised system house for panel manufacturing, only. (LTP-8) Above/ SS06 e 1.00 Numbers 471876.16 471876.16 AT Par 471876.16 Below/P ar Description:- Supply, installation, testing & commissioning of cubical type, floor mounted, dust & vermin proof, multi-tier construction, LT switch board (each panel shall be in segregated compartment), fabricated with 1.6 mm thick CRCA sheet with base MS channel 100x50x7.5mm (nominal size), duly powder coated. The LT switch board shall be suitable for operation on 3 phase, 4

instrument connections with copper conductor cable, main copper bus bars 600 Amps, front operated switch gears, selector switches, ammeter, voltmeter with LED type indication lights, cable glands, earthing studs etc. and shall comprise of following 1) 2 Nos. 400 Amp. MCCB FP, 50kA as incoming. 2) 1 Nos. 320 amps MCCB (As interconnected Bus coupler) 3) 3 Nos. 250 Amp. MCCB FP as outgoing. 4) 11 Nos. 125 Amp. MCCB FP as outgoing. LT Panel shall be Confirming to IS-60947 and IS/IEC 61439 Part-1, Part-2, Part-3 & Part- 5 as applicable and shall be equipped with inbuilt Power Pack with battery backup or UPS with minimum 15Ah Battery, complete in all respect. LT Panel shall be manufactured by OEM switchgear or its authorised system house manufacturer. (LTP-3) Above/ SS06 f 1.00 Numbers 406714.91 406714.91 AT Par 406714.91 Below/P ar Description:- Design, Manufacturing, supply, installation, connecting & commissioning of cubical type LT. Switch Board Distribution panel fabricated with CRCA sheet of thickness minimum 1.6 mm with 9 tank process powder coated CPRI approved specification, IP-44. Supply, fixing, testing & commissioning of suitable main TPN copper bus bar 600 Amps in the panel including supply & fixing of CT's and sub copper bus bar to connecting outgoings MCCB to main copper bus bar of suitable size with aluminium lugs of all incoming side. All MCCBs with outgoing cable will be connected with aluminium lugs through cable glands, wiring of meter & indication lamp etc., as per required with suitable size of copper conductor cable. (Note: The following material will be Supply, fixing & connecting in the cubical type LT switch board panel including testing & commissioning) (1)

coupler), 04 poles, 35 KA- 01 No. (3) Outgoing MCCB 250 Amps, 04 poles, 35 KA- 04 No. (4) Outgoing MCCB 200 Amps, 04 poles, 35 KA- 01 No. (5) Outgoing MCCB 100 Amps, 04 poles, 25 KA- 02 No (6) Outgoing MCCB 63 Amps, 04 poles, 25 KA- 04 No. (7) Supply & fixing of LED Multifunction Meter conforming to IEC 62053-21, Accuracy class-1.0 as per IEC 61036, three phase voltage, current, frequency, PF, kW, kVA, kVAR, kWh, kVAh, kVARh with communication, two output contact for trip, optional RS485, Auxiliary Supply: 85-300V AC/DC, Rated Current: 5Amp, Frequency Measurement: 20-200 Hz as per requirement and instruction of site engineer. (8) RYB LED Indication lamps for incoming & outgoing feeders. All ACB, MCCB & COS shall be of reputed make as per requirement and instruction of site engineer. LT Panel shall be Confirming to IS-60947 and IS/IEC 61439 Part-1, Part-2, Part-3 & Part-5 as applicable and it shall be equipped with inbuilt control supply Power Pack (UPS with 15Ah Battery), complete in all respect. LT Panel shall be manufactured by switchgear OEM or its authorised system house for panel manufacturing. (LTP-2) Above/ SS12 50.00 Numbers 3975.98 198799.00 AT Par 198799.00 Below/P ar

providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required and connection with 40mm x 4 mm GI strip/flat instead of GI wire. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Schedule () A-SUB STATION WORK (HT Indoor/Outdoor Gantry) 4994512.95 Above/ SS15 20.00 Numbers 19705.30 394106.00 AT Par 394106.00 Below/P ar

comprising of bottom 5.8 mtr, middle, 3.1 mtr & top 3.1 mtr Approx weight 313kg. (Designation 410 SP-65) IS: 2713 Pt.-1 to 3/1980. (Latest version) in cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 40mm nominal size) foundation, including excavation & refilling. Dressing up of the plinth etc. complete in all respect as per direction of site Engineer. Above/ SS17 48.00 Numbers 248.35 11920.80 AT Par 11920.80 Below/P

Description:- Supply & erection of 11KV pin insulator set with MS bolts & nuts on pole complete in all respect. (for drawing 11 KV O.H line). Above/ SS18 18.00 Numbers 766.62 13799.16 AT Par 13799.16 Below/P ar

of cross arm straps & clevies type disc insulator 16mm dia cotter pin strain type strain clamps 16mm dia 170mm long bolts with nuts, spring washers, split pin 5mm dia plain washers etc. The strain insulator set should be as per Sketch No. DY.CEE/Con/BG/GKP/ STD/1/0492. Above/ SS20 20.00 Numbers 2628.00 52560.00 AT Par 52560.00 Below/P ar

suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. Above/ SS21 10.00 Set 10129.66 101296.60 AT Par 101296.60 Below/P ar 14 Description:- Supply, erecting & mounting of 11KV vertically mounted GOS (Gang operated switch)

complete in all respect. Above/ SS22 1550.00 Metre 37.07 57458.50 AT Par 57458.50 Below/P ar 15 Description:- Supply & erection of Alumn. Conductor steel reinforced conductor (6/3.35 + 1/3.35) (Rabbit) on pole including its bending etc. complete in all respect. (ACSR conductor will be supplied by contractor.) (for drawing overhead HT/LT Line) Above/ SS23 15.00 Set 1621.67 24325.05 AT Par 24325.05 Below/P ar

diax1.8M.long stay rod, anchor plate of size 30cmx30cmx6.4mm thimble stay clamps, turn buckle 19mmx60cm/bow tightner, 7/4.00 G.I.wire, strain insulator etc. in cement concrete 1:3:6 (1cement:

complete in all respect. Above/ SS24 150.00 Metre 579.36 86904.00 AT Par 86904.00 Below/P ar 17 Description:- Supply, fabricating & erecting of rolled steel Top channel of size, 100mmx50mmx6mm with MS clamp, MS flats of size 50mmx6mm clamps, bolts & nuts suitable for double pole structure complete in all respect.(H pole structure and 11 KV line.) Above/ SS25 200.00 Kg 94.75 18950.00 AT Par 18950.00 Below/P

Description:- Supply, fabricating & erecting of 50X50X6 mm size MS angle, 50x6mm MS flats, clamps, bolts & nuts etc. wherever is required except schedule item. Above/ SS28 1.00 Numbers 761250.00 761250.00 AT Par 761250.00 Below/P ar 19 IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY 19 Description:- "Design, supply, erection, testing and commissioning of 250 KVA, 11/0.433 KV, 3 Phase, 50 Hz, Outdoor type, copper wound oil immersed, Delta/Star, Dyn11, ONAN cooled Energy efficient (Energy Efficiency Level 3 or above New defined) Distribution Transformer with off load Tap changer having range +5% to -10% in steps of 2.5% each , confirming to IS: 1180 amendment - 4 or latest, having following : Dehydrating breather, Oil level indicator with minimum/maximum marking, control wiring, WTI/OTI indication & alarm cum trip contacts/terminals fitted in marshalling box complete in all respect and fully filled with Transformer Oil. Note:- Transformer shall be of reputed make. " Above/ 1376529.0 SS 28 b 1.00 Numbers 1376529.03 AT Par 1376529.03 Below/P 3 ar Description:- Design, supply, erection, testing and commissioning of 500 KVA, 11/0.433 KV, 3 Phase, 50 Hz, Outdoor type, copper wound oil immersed, Delta/Star, Dyn11, ONAN cooled Energy

changer having range +5% to -10% in steps of 2.5% each , confirming to IS: 1180 amendment - 4 or latest, having following : Dehydrating breather, Oil level indicator with minimum/maximum marking, Buchholz relay, control wiring, WTI/OTI indication & alarm cum trip contacts/terminals fitted in marshalling box complete in all respect and fully filled with Transformer Oil. Note:- Transformer shall be of reputed make. Above/ 1656818.4 SS 30 a 1.00 Numbers 1656818.41 AT Par 1656818.41 Below/P 1 ar Description:- Supply, installation, testing, connection and commissioning of HT 11 KV indoor type vacuum Circuit Breaker type VMX vertical isolation & horizontal draw out type comprising of following: Incoming: one no. 630 Amp 11 KV 250 MVA VCB with Dual core CT of ratio 100/50/5 A, Dual core PT of ratio 11KV/110 Volt and Outgoing: 2 nos VCB of 630A, 250MVA 3phase 11 KV with Dual core CT of ratio 50/25/5A, Dual core PT of ratio 11 KV/110 Volt. CT specification: minimum burden 15VA, accuracy: class- 5P10 for protection and Class-0.5 for Metering & indication for

5P10 for protection & Class-0.5 for Metering & indication for Incoming & Class-1 for Outgoing VCB, Primary: 11kV and Secondary: 110V (for Control, metering & Instrumentation) & 230V (for Power Pack). VCB panels shall be equipped with Auxiliary relay, Master trip relay, over current relay, Earth fault relay, Voltmeter, Ammeter, selector switch, indicating lamps, HRC fuse, remote switch, digital tri-vector meter, control circuit wiring, including inbuilt 110Vac/ 24Vdc Power pack or UPS with sufficient Battery backup for three consecutive opening & closing operation of VCB. The panel will be floor mounting draw out type having metal clad totally enclosed dust & vermin proof, conforming to IS:2516, VCB panel shall be complete in all respect and shall conform to CPWD General specifications for electrical works part IV Sub stations-2013/ section-2: 'High voltage panel' attached with Tender NIT. Above/ SS31 a 2.00 Numbers 50551.20 101102.40 AT Par 101102.40 Below/P

Description:- Dismantling and Transportation of existing 500 KVA distribution transformers including loading and unloading from Sub-station to Consignee Store as and when required basis. Above/ SS33 14.00 Numbers 14076.00 197064.00 AT Par 197064.00 Below/P ar Description:- Supply & Making Maintenance free Earthing arrangement for HV system. Earth

mm, Inner Shell thickness = 3.25 mm, Terminal size 30 x 10/12 x 12 Galvanisation Outer Shell 80-

CEE/Maintenance Free Earthing/July 2009 Amendment No 1. All material will be supplied by Contractor. (Transformer & HT panel) Above/ SS34 500.00 Metre 188.44 94220.00 AT Par 94220.00 Below/P

Description:- Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for Earthing connection etc. as required. Above/ SS17 a 20.00 Numbers 2310.45 46209.00 AT Par 46209.00 Below/P ar 25 Description:- Supply & fixing of cross arm bracket made of M.S. angle of size 65 mm x 65 mm x 6 mm of length 6.5 ft long with 3 Nos. of 11 Kv pin insulator including supply of all necessary clamps, nuts & bolts etc. & painting. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () A-SUB STATION WORK (Miscellaneous items) 428080.80 IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Above/ SS37 15.00 Numbers 1297.09 19456.35 AT Par 19456.35 Below/P

Description:- Supply & provision of Insulating Rubber Mat of size 2 Mtr. X 1 mtr. X 1.5" for insulation purpose in front of LT panel Complete in all respect. Above/ SS38 150.00 Kg 46.84 7026.00 AT Par 7026.00 Below/P

Description:- Supply of barbed wire & making anti-climbing device on horizontal & diagonal MS angle iron bracings on poleetc. upto suitable height for safety complete in all respect. Above/ SS40 4.00 Pair 1093.57 4374.28 AT Par 4374.28 Below/P ar

extra wide PU sole, slip resistant oil & Chemical resistant, abrasion resistant, soft low density mid sole, electric shock resistant upto 15KV as per IS:15298 (Part-2) : 2011. ISO 20345:2004 with test certificate. (Warranty as per OEM various sizes electrical safety shoe requirement men size i.e. Nos.6,7,8,9,10 as required by Railway. Above/ SS41 7.00 Numbers 2316.90 16218.30 AT Par 16218.30 Below/P ar 29 Description:- Supply of shock treatment chart Laminated electric shock treatment chart (in three languages (Hindi & English) Size (3x2) feet 6 mm acrylic sheet vinyl print with mounting and biding with 2 hooks for hanging on wall, sample /matter details. Above/ SS44 6.00 Numbers 17985.36 107912.16 AT Par 107912.16 Below/P ar 30 Description:- Making foundation (Size 2500mm x 2000mm x 1500mm) with re-enforced cement concrete mixture of 1:2:4 (1 cement: 2 coarse sand: 4 graded stone) & brick wall along with ramp plastering etc. for 250/500 KVA Transformer. Above/ SS46 1.00 Numbers 23600.00 23600.00 AT Par 23600.00 Below/P

Description:- Supply of Aluminium self supporting sliding Ladders, 28feet height . Above/ SS47 10.00 Set 445.55 4455.50 AT Par 4455.50 Below/P ar

1968/1991 or latest if any, Length 375 MM, Test Potential 30KV and Working Potential 25KV or more than 25 KV. Manufacture TC issued by any Govt.approved Laboratory submitted along with materials. Above/ SS48 4.00 Numbers 4900.69 19602.76 AT Par 19602.76 Below/P ar

of 7.9 Kg per meter with nut & bolts on tubular pole grouted by cement concrete (1:3:6) including excavation of earth work and making of foundation of H pole with painting of H pole structure etc. as required. The H pole structure will be made as per drawing No.DRM/Elect/IZN/04/2005. . Above/ SS50 3.00 Job 27871.86 83615.58 AT Par 83615.58 Below/P ar

+ 02/03 outgoing) , including all HT/LT and control cable connection, control and protection relay setting ( All safety precautions shall be ensured by contractor). Old/New HT VCB Panel shall be supplied by Railway Above/ SS51 1.00 Job 10515.87 10515.87 AT Par 10515.87 Below/P ar 35 Description:- Dismantling of existing panel board with all accessories like Change over, ACB, MCCB, MCB, bus bar, meter etc without damaging the materials & shifting to SSE store/actual work site by contractor's own arrangement as per instruction of Engineer incharge at site. Above/ SS52 2.00 Job 4000.00 8000.00 AT Par 8000.00 Below/P ar 36 IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Dismantling of H-Pole, as per direction of Engineer Incharge at site complete in all respect. Above/ SS53 2.00 Set 2301.10 4602.20 AT Par 4602.20 Below/P ar Description:- Supplying and Fixing of fire bucket stand made out of MS angle with one coat of

each stand should have four nos fire buckets of 24 gauge galvanized steel sheet, standard 9 litre capacity of each bucket and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters ""Fire"" in black and gold at approved location as per direction of Engineer incharge. Above/ SS54 4.00 Numbers 7229.52 28918.08 AT Par 28918.08 Below/P ar

flat base including valve, discharge hose of not less than 10 mm dia. min. 600 mm long & complete in all respects including initial fill with C02 gas confirming to IS:3071966 filled to a filling ratio of not more than 0.667and wall suspension bracket. Capacit y 4.5 Kg. Above/ SS55 3.00 Numbers 19621.24 58863.72 AT Par 58863.72 Below/P ar

VCB unit including protection relay calibration & testing with primary & secondary current injection kits, CT/PT installation and connection, insulation resistance testing of panel, replacement of defective LED indicators, Push button/rotary switche, Voltmeter, Ammeter as required. (Note: As required spare CT & PT shall be supplied by Railways) Above/ SS56 2000.00 Litre 15.46 30920.00 AT Par 30920.00 Below/P

Description:- Transformer oil filtration. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () B-CABLE LAYING WORK 3758803.00 Above/ Please see Item Breakup for details. 502451.00 AT Par 502451.00 Below/P ar

confirming to IS:14930Part-II, along with all accessories (socket/ coupler and T joint where ever required), including excavation of 110 cm depth and 40 cm wide cable trench, in all kinds of soil and its refilling with the same excavated soil with laying of DWC pipe of required size, for laying and protection of power cable. Above/ CBL 02 3200.00 Metre 219.03 700896.00 AT Par 700896.00 Below/P ar Description:- Laying of multicore XLPE insulated power LT/HT cable 1100 volt upto 4 core of sizes

cushioning, protective brick covering as per IS 1255/1983 (Latest version) and Supply & fixing of stone made Cable route marker at every 70 Mtr interval and all strategic locations track /road crossing & cable route alignment deveation >30 degree, complete in all respect.(Only cable will be supplied by Railway) Above/ CBL 02 i 1500.00 Metre 150.83 226245.00 AT Par 226245.00 Below/P ar

sqmm direct in ground at a depth of 1 Meter below ground and 350 mm wide trench including excavation, sand cushioning, protective bricks covering as per IS: 1255/1983 (Latest version) & refilling of cable trench with solid earth consolidating over the trench complete in all respect. (Cable will be supplied by Railway) Above/ CBL 03 5300.00 Metre 73.80 391140.00 AT Par 391140.00 Below/P ar 04 IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Laying of 1 No. Additional multicore LT/HT XLPE cable up to 11 KV voltage level, upto size 240 sqmm direct in ground in above made trench vide item no 1 at a depth of 1 Meter below ground level including trench widening & excavation to ensure 04-inch cable separation to accommodate this additional cable sand cushioning, protective covering with bricks as per IS: 1255/1983 (Latest version) complete in all respect. (Cable will be supplied by Railway) Above/ CBL 04 3500.00 Metre 18.94 66290.00 AT Par 66290.00 Below/P ar 05 Description:- Laying of LT cable of required size in open air/ along the Pole/ wall /Pucca trench/DWC Pipe with clamping arrangement. Cable laying work shall be governed by IS:1255/1983.(Cable & DWC Pipe will be supplied by Railway) Above/ CBL05 50.00 Metre 713.58 35679.00 AT Par 35679.00 Below/P

Description:- Making support for cable by GI Pipe 100 mm dia B class on pole/wall/FOB/Shelter, conforming to IS:1239 complete in all respect. Above/ CBL 10 3.00 Numbers 60000.00 180000.00 AT Par 180000.00 Below/P ar 07 Description:- Supply, fixing, Testing & Commissioning of 11 KV HT Feeder Pillar consisting of 2 mm thick powder coated CRCA sheet body and 80x10 mm aluminium bus-bar conforming to IP-55 and IEC-61432 as per technical specification attached with all accessories & Plinth. Above/ CBL 17 iii 200.00 Metre 648.33 129666.00 AT Par 129666.00 Below/P ar

with cover, Hardware etc. as per IS:2629/4759 for cabling on wall/pillar/ground or wherever is required complete in all respect. (for proper cabling of existing & new overhead cabling) - {Size 300 mm (W)X 100 mm (H)}. Above/ CBL19 12.00 Numbers 17157.00 205884.00 AT Par 205884.00 Below/P ar 09 Description:- Supply & mounting/fixing of heat shrinkable type 11KV out door cable end termination jointing kit, confirming to IS:13573/1992 (Latest version) suitable for 120-185 mm sq. 3 core XLPE alumn. Conductor cable and connecting with cable complete in all respect. Above/ CBL20 12.00 Numbers 11675.00 140100.00 AT Par 140100.00 Below/P ar 10 Description:- Supply & mounting/fixing of heat shrinkable type 11KV In-door cable end termination jointing kit, confirming to IS:13573/1992 (Latest version) suitable for 120-185 mm sq. 3 core XLPE alumn. Conductor cable and connecting with cable complete in all respect. Above/ CBL 24 i 1300.00 Metre 908.04 1180452.00 AT Par 1180452.00 Below/P ar Description:- All work pertaining to Horizontal Directional drilling (HDD/Boring and trenchless cable

and 125 mm outer dia conforming to IS: 4984/1995 and laying of various cables in HDPE pipe as permissible depending on cable size in boring under the track/road will be crossed. The depth of Horizontal boring should be minimum 1.65 Mtr. Upto 3 Mtr from rail flange/road level. Note: The bore and the laying of cable in the bore under the track/road as per direction of Engineer in charge. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () C-BUILDING ELECTRIFICATION WORK 4287769.04 Above/ ELE 01 25.00 Numbers 2189.70 54742.50 AT Par 54742.50 Below/P ar

SPN MCB, DB's prefitted with incoming 63AMP. 2pole MCB-1 no and outgoing 6/10/16/20 A. single pole MCB -6 Nos.breaking capacity 10KA, bus-bar, neutral link, earth bar, plates .Confirming to IS/IEC 60898-2;2003, and IS:13032/1991 including, drilling holes on the board, its connection, earthing the body etc. complete in all respect. Above/ ELE 04 2.00 Numbers 800.10 1600.20 AT Par 1600.20 Below/P ar 02 IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Supply & fixing metal enclosed board with 25 Amp MCB - 1 no, modular socket-32 A,1no conforming to IS:8828-1996, IS:13032/1991,including, drilling holes on the wall/board, its connection, earthing etc. complete in all respect.(AC/geyser point) Above/ ELE 06 i 9.00 Numbers 10749.20 96742.80 AT Par 96742.80 Below/P ar

sheet steel made 415 V, TPN distribution board, consisting of 63 A four pole MCCB-1 No,63 A DP MCB- 1 No, 32 A SP,MCB- 2Nos, 16 A SP,MCB- 1 No10 A SP,MCB- 1 No, inclusive of 100A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB as required. Above/ Please see Item Breakup for details. 1039560.00 AT Par 1039560.00 Below/P ar

cable conforming to IS: 694 (Latest version) & its drawing in laid (Recessed/surface) PVC conduit pipe for wiring/sub-main/main as required including connection testing & commissioning. In addition to it suitable size of T-bend socket & other joints which is required provided by contractor.(incl. renovation of wiring of existing PF shelter, FOB, Station building etc). Above/ Please see Item Breakup for details. 64294.40 AT Par 64294.40 Below/P ar 05 Description:- Supply & fixing GI box along with modular base & cover plate for modular switches conforming to IS:3854/1997 (Latest version)/flush type socket outlet as per IS;1293-1988 (Latest version) including connection, testing & commissioning complete in all respect. Above/ Please see Item Breakup for details. 81361.40 AT Par 81361.40 Below/P

Description:- Supply, fixing and commissioning of modular type switches, sockets & bell push as per relevant IS 1293:2019 and IS 3854:1997 or latest. Above/ ELE 10 6000.00 Metre 39.85 239100.00 AT Par 239100.00 Below/P ar 07 Description:- Supply & fixing of heavy duty PVC conduit pipe 25 mm dia conforming to IS: 9537/Pt.III/1983 (Latest version) with accessories, Jn. Box etc. including making, chase, plastering/clamping etc. Above/ ELE 10 i 2500.00 Metre 70.00 175000.00 AT Par 175000.00 Below/P ar 08 Description:- Supply and recessing/fixing of PVC Conduit pipe 32 mm (Medium) conforming to IS 9537/ Part III/1983 (Latest version) with accessories, junction box, bend etc. including making chase, plastering/ clamping etc. Above/ ELE 12 20.00 Numbers 325.00 6500.00 AT Par 6500.00 Below/P

Description:- Making hole in the wall for exhaust fan and finishing properly complete in all respect. Above/ ELE 13 500.00 Numbers 592.09 296045.00 AT Par 296045.00 Below/P ar

mm Integrated with Aluminium Extrusion Base with LED & Driver, decorative pin type end caps & copper contacts with Diffuser made of transparent polycarbonate with tube light, operating voltage single phase 230 volt AC, 50 Hz, 5 year warranty, with required size of clamp etc. complete in all respect. As per detailed Technical specification of Tender document. Above/ ELE 14 20.00 Numbers 168.20 3364.00 AT Par 3364.00 Below/P

Description:- Supply, installation, testing & energisation of 10 watt LED tube light fitting with 5 year warranty with required size of clamp etc. complete in all respect . Above/ ELE 15 i 15.00 Numbers 9503.10 142546.50 AT Par 142546.50 Below/P ar

circulating fan 600/610 mm sweep, suitable to work on single phase 220/240 volts, 50 Hz AC single phase supply, 50 Hz, Max 150 watt, oscillating facility 3/4 aluminium die cast blade conforming to IS:2997/1964 or latest. Including supply of suitable size MS clamp as required and as per direction of site engineer. IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Above/ ELE 16 130.00 Numbers 3370.56 438172.80 AT Par 438172.80 Below/P ar

ceiling fan as per IS:374/2019 or latest in White Colour with 3 blade, speed control compatible to electronic regulator (covered vide item ) along with 12 mm dia 300 mm long suspension rod and clamp fastener etc. and double ball bearing complete in all respect. Above/ ELE 18 i 20.00 Numbers 2509.52 50190.40 AT Par 50190.40 Below/P

Description:- Supply, installation, testing & commissioning of Exhaust fan, 380 mm with louver indoor type window/wall Mount as per IS: 2312 for 230 Volt AC Single. Above/ ELE 19 650.00 Numbers 39.04 25376.00 AT Par 25376.00 Below/P

Description:- Supply and fixing 3 pin 5 A ceiling rose including connections etc. as required as per IS:371/1999 (Latest version) Above/ ELE 21 10.00 Numbers 10436.00 104360.00 AT Par 104360.00 Below/P ar 16 Description:- Supply& fixing of Geyser of 20 Ltr storage capacity 5 star rated 230 volt AC steel body, material of tank stainless steel conforming to IS:2082:2018 with all accessories complete in all respect. Above/ ELE 23 100.00 Numbers 2767.05 276705.00 AT Par 276705.00 Below/P ar 17 Description:- Supply, installation, testing & energisation of ceiling mounting 2 feet x2 feet, 36 watt LED fitting or equivalent decorative LED luminaire as per direction of engineer in-charge with 5 year warranty with required size of clamp, ceiling rose etc. complete in all respect Above/ ELE 24 130.00 Numbers 284.98 37047.40 AT Par 37047.40 Below/P

Description:- Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Above/ ELE 30 40.00 Numbers 119.99 4799.60 AT Par 4799.60 Below/P ar 19 Description:- Supply of ceiling fan 2.5 feet long 12mm dia M.S. down rod/ flat of suitable size & fastener bolt/Clamps and erecting in concrete slab/roof structure of the Building etc. for hanging ceiling fan complete in all respect. Above/ ELE 32 2.00 Numbers 71999.00 143998.00 AT Par 143998.00 Below/P

Description:- Supply of 2 KVA UPS Single phase 160V-260V,50 HZ input supply, with 2 hour backup at full load .complete in all respect. (window ticketing) Above/ ELE 33 2.00 Numbers 106200.00 212400.00 AT Par 212400.00 Below/P

Description:- Supply of 3 KVA UPS Single phase 160V-260V,50 HZ input supply, with 2 hour backup at full load. Complete in all respect. (window ticketing/station building) Above/ ELE 35 300.00 Metre 161.75 48525.00 AT Par 48525.00 Below/P

Description:- LED Rope Light multi colour (Red, Yellow, Blue, Green, Warm White, COOL day light),

Description:- Supply, fixing, testing & connecting of Driver for above LED Rope Light item code ELE 35. Above/ ELE 39 10.00 Numbers 671.40 6714.00 AT Par 6714.00 Below/P

Description:- Supply, fixing , testing & commissioning of Decorative LED Mirror Light LED fitting 10-

IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Above/ ELE 40 5.00 Numbers 4796.00 23980.00 AT Par 23980.00 Below/P

Description:- Supply, fixing , testing & commissioning of Insect Killer, Single Phase 230 Volt AC. Above/ ELE 46 2.00 Numbers 17101.70 34203.40 AT Par 34203.40 Below/P

Description:- Supply , fixing , testing & commissioning of Oil filled Radiator Room heater, 11 wave fin single 230 Volt 2500 Watt. Above/ ELE 47 i 16.00 Numbers 5174.99 82799.84 AT Par 82799.84 Below/P ar

0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per site requirement and flood light to be erected as per the direction of site engineer in charge. Above/ ELE 50 50.00 Numbers 1034.25 51712.50 AT Par 51712.50 Below/P

Description:- Supply, installation, testing & Commissioning of 1x1 feet 18 W, 230V, CRI-90, CCT- 2700K, square shaped LED down lighters Above/ ELE 51 2.00 Numbers 48000.00 96000.00 AT Par 96000.00 Below/P

Description:- Supply, installation, testing & Commissioning of BEE 5 Star rated inverter type 1.5 Ton Split Type Air Conditioner complete. Above/ ELE 53 10.00 Metre 867.30 8673.00 AT Par 8673.00 Below/P

Description:- Supply, installation & Commissioning of extra copper pipe line along with insulation and other accessories for connecting indoor unit to outdoor unit of 1.5 Ton split AC. Above/ ELE 54 10.00 Metre 128.10 1281.00 AT Par 1281.00 Below/P ar 31 Description:- Supply, connection testing & Commissioning of Flat 4 core size 2.5 sq. mm copper. PVC insulated & PVC sheathed industrial cable, 1100 Volts conforming to IS:694 for air conditioner connection. Above/ ELE 55 10.00 Metre 89.25 892.50 AT Par 892.50 Below/P

Description:- Supply, installation, testing & Commissioning of Nylon Pipe 01 inch diameter for water drainage including saddle & clipping at every 1M interval/bends. Above/ ELE 66 10.00 Numbers 21717.78 217177.80 AT Par 217177.80 Below/P ar

Station made of 18 mm MDF with Deco Paint Branded Electric wiring with MCB. The Size of the system is Height - 5', Width 24 ", Base - 30" (It can be customised as per client requirement) The charging station is to charge 24 Nos. of Cell Phone/Laptop together at Single Place (12 Nos. at Each Side) . Branding of Mobile Charging station as desired by Railway. Above/ Square ELE 67 64.00 635.00 40640.00 AT Par 40640.00 Below/P Foot ar

backlit/Clipon board (size 8x4 feet x 2 No. per station) for indoor use made of aluminium profile, light guided plate sheet of 2.5mm & LED profile backside covered with 5mm sun board. Printed subject as per approved drawing by railway. Note :- LED based Backlit/Clipon board should he guarantee for a period of five years. Above/ ELE 13 i 200.00 Numbers 824.90 164980.00 AT Par 164980.00 Below/P ar 35 IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Supply & fixing of LED Inverter Batten 20 Watt 6500 degree kelvin Tube light fitting with Li ion battery of minimum 4 Hours backup, operating voltage :140 Volt to 250 volt 50 Hz AC supply, minimum lumen efficacy 100 lumen per watt, Fitting must have auto cut facility after battery fully charged, with supply of flexible wire to connection the nearest ceiling rose. warranty for free replacement is minimum two years. As per explanatory note and direction of site incharge. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () D-MISCELLANEOUS WORK 72466.40 Above/ Square MIC05 6000.00 6.18 37080.00 AT Par 37080.00 Below/P Foot ar

/Station buildings and preparation & Submission of building wiring drawings (General Layout drawing and single line diagram in 03 copy on tracing paper.) for station, halt station, Gate Lodge, ABS Hut, Quarters, S&T depot etc. Above/ MIC 08 4.00 Numbers 1916.85 7667.40 AT Par 7667.40 Below/P

Description:- Supply of Stanley Analog electrician Tool Kit with wire strippers, insulated screw drivers, Insulated pliers, Electric Tape, Hacksaws, Cable cutter, Spanner, Voltage tester) Above/ MIC 10 4.00 Numbers 4999.00 19996.00 AT Par 19996.00 Below/P

Description:- Provision of Automatic Infrared Sensor High Jet Speed Fast Dry Hand Dryer, ABS Plastic, voltage: 200-240 V, 50 Hz, Induction distance: 5mm - 20mm, Power : 1800 W Above/ MIC04 1.00 Numbers 7723.00 7723.00 AT Par 7723.00 Below/P ar 04 Description:- Designing of HT/LT distribution system, including various equipments/cable capacity calculation, protection scheme, cable layout. Submission of design calculation report. BOQ and detailed single line diagram and cable route diagram, for NSG- 05 level station. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () E-OUTDOOR ELECTRIFICATION & LIGHTING WORK 5038188.54 Above/ ODL 01 i 2.00 Numbers 396890.90 793781.80 AT Par 793781.80 Below/P ar Description:- Supply, Installation, testing & Commissioning of 16 Mtr. totally Hot dip Galvanized suitable for wind velocity of 50 Mtr./sec. as per IS:875 Part-3 1987 latest version High mast lighting system along with head frame, minimum 4 mm dia SS wire rope, single drum winch galvanized lantern carriage suitable for mounting of "8 LED luminaires fixed in circular peripheral arrangement"

powered reversible power tool for raising and lowering of lantern carriage, gear box coupled with the winch & torque limiter, along with supply & installation of 8 Numbers 200W LED flood light luminaires as per attached technical particular and twin dome aviation obstruction light. High mast to be installed on OEM designed suitable RCC foundation considering safe soil bearing capacity of 10 T/Sq. Mtr. at 2 Mtr. depth, foundation bolt of special steel with nuts, washers anchor plates, templates. High mast shall also include heavy gauge hot dipped galvanized lighting feeder panel comprising of 32A four pole main incoming MCB's, timer switch, 32A 4P contactor, reversing starter and protective system etc. and maintenance free earthing, as required. Above/ ODL 01 ii 2.00 Numbers 396890.90 793781.80 AT Par 793781.80 Below/P ar 02 IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Supply, Installation, testing & Commissioning of 16 Mtr. totally Hot dip Galvanized suitable for wind velocity of 50 Mtr./sec. as per IS:875 Part-3 1987 latest version High mast lighting system along with head frame, minimum 4 mm dia SS wire rope, single drum winch galvanized lantern carriage suitable for mounting of "all 8 LED luminaires fixed in 0-180 degree and Suitable counter-weights fixed on 180-360 degree semi circular peripheral arrangement" for Asymmetrical lighting. As well as inclusive of CG boxes & lightning finial, integral type high powered reversible power tool for raising and lowering of lantern carriage, gear box coupled with the winch & torque limiter, along with supply & installation of 8 Numbers 200W LED flood light luminaires as per attached technical particular and twin dome aviation obstruction light. High mast to be installed on OEM designed suitable RCC foundation considering safe soil bearing capacity of 10 T/Sq. Mtr. at 2 Mtr. depth, foundation bolt of special steel with nuts, washers anchor plates, templates. High mast shall also include heavy gauge hot dipped galvanized lighting feeder panel comprising of 32A four pole main incoming MCB's, timer switch, 32A 4P contactor, reversing starter and protective system etc. and maintenance free earthing, as required. Above/ ODL 01 iii 1.00 Job 28400.00 28400.00 AT Par 28400.00 Below/P ar

crane, Complete overhauling, lubrication and greasing of lowering/lifting winch mechanism, wire rope, Replacing of defective nuts and bolts washer and clip, Complete rewiring of all LED flood light and refitting of LED flood light, Complete re-erection & fixing with help of Hydra crane and servicing, testing & commissioning of Highmast Lighting system, complete in all respect. Above/ ODL 01 iv 1.00 Each 33414.32 33414.32 AT Par 33414.32 Below/P ar

having the safe soil bearing capacity at site as 10T/sq mtr at 2 meter depth including supply of foundation J-bolts manufactured from special steel, along with nuts, washers and anchor plates and templates. As per direction of Site Engineer. Above/ ODL 03 120.00 Numbers 3850.52 462062.40 AT Par 462062.40 Below/P

Description:- Supply, Installation, testing & commissioning of 60 Watt street light LED luminaire fittings with 5 year warranty as per detailed specification attached. Complete in all respect. Above/ ODL 05 10.00 Numbers 5581.40 55814.00 AT Par 55814.00 Below/P ar

saving, environmentally friendly, long life aesthetically designed made in die-cast aluminium landscape having IP65 protection with high power LED as light source to be fitted on GI pipe 50 mm diameter of 3.0m length complete with driver circuit, lamp etc. and all accessories as per direction of Engineer In-charge at site. Above/ ODL 07 4.00 Numbers 8443.56 33774.24 AT Par 33774.24 Below/P ar 07 Description:- Prov.& supply of Timer based semi automatic light control Panel Board consisting with 16 A,4 Pole MCB-5Nos+16 A, 4 Pole contactor inbuilt digital timer switch -2 nos , all assembled inside 1 feet x 2 feet size CRCA Sheet Powder coated box complete. Above/ ODL 07 i 4.00 Numbers 9424.01 37696.04 AT Par 37696.04 Below/P ar

adjustable time delay relay assembly with the following accessories incoming 3 phase 32 Ampere contactor with NO/NC, PCB circuit plate with required electric component complete wiring & power supply control by 6 A SP MCB in MS Box made by 1.6 mm CRCA sheet with powder coated paint system suitable for maximum 6 KW lighting load. Above/ ODL 08 60.00 Numbers 13526.47 811588.20 AT Par 811588.20 Below/P ar Description:- Supply & Erection of 6 mtr Long G.I Octagonal pole with Standard double arm bracket (0.5 mtr long) made up of 48.3mm dia G.I.pipe bracket suitable for road way LED Luminaires fitment

TPN connector 6 amp, SP MCB Fitted inside connection chamber having neoprene rubber gasket and

flexible copper cable, (as per detailed drawing attached). Street light pole to be fixed on suitable foundation of cement, concrete 1:3:6 (Ratio concrete) foundation. Including excavation & refilling. dressing up of the plinth. IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Above/ ODL 08 i 4.00 Numbers 16893.07 67572.28 AT Par 67572.28 Below/P ar Description:- Supply, Erection, Testing of hot dip galvanized tapered octagonal pole of 7.0 Mtrs long, top dia 70 mm, bottom dia 155 mm, sheet thickness 3 mm, base plate dimension (L x B x T)

plate thickness 4 mm. (Octagonal pole shall confirm to IS: 2629 or latest.), Fitting shall be fixed with suitable FR PVC insulated unsheathed multi strand flexible copper cable, Street light pole to be fixed

refilling. dressing up of the plinth. Design, manufacturing, supply and fixing of stainless steel square frame of size 450 mm x 450 mm made by stainless steel square pipe 32 mm dia with stainless steel pipe 80mm dia 150 mm long & making 4 Nos holes in the stainless steel pipe with top 380 mm sheet and making of holes in the square pipe for fixing of 04 Nos. LED fittings. Including steel nut & bolts on the octagonal pole etc. as per site requirement as per direction of Engineer in charge at site. Note:-1. Galvanized thickness of pole should be minimum 65 microns and test report to be submitted by the contractor at the time of supply. 2.Octagonal pole shall be pre fitted with FR Bakelite base sheet with TPN connector 6 amp, SP MCB Fitted inside connection chamber having neoprene rubber gasket and 50 cm long examination door cover Above/ Square ODL 12 i 100.00 2638.38 263838.00 AT Par 263838.00 Below/P Foot ar Description:- Design, manufacture, display, erection and installation of wall/hanging/floor mounting type LED illuminated sign / direction boards in various shapes (Single & double sided horizontal & vertical Elliptical/Parabolic- Full Elliptical/Half Elliptical/Semi Elliptical or other types as per site requirement /Flat Single & double sided wall mounted/ Circulating area signage) as per enclosed specification and as per site requirement (decided by engineer in charge). The display

graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monogenic calendared vinyl of 70 µm thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. Above/ ODL16 4.00 Numbers 98557.10 394228.40 AT Par 394228.40 Below/P ar

with (Non-CFC refrigerant R-134 a) energy efficient compressor consisting of 380(litres) storage capacity,170 (litres/hr) cooling capacity,4 faucets, faster cooling, Eco friendly, stainless steel body, stainless steel tank in power saving PUF insulation, easy controls speedy drainage and suitable for

of cooling capacity 80 litres per hr, storage capacity 120 litres and suitable for 230 volts/single phase/50 Hz AC supply conforming to IS:1475(Part 1);2001 latest, material will be SS Grade 304 with 0.5 mm thickness and body of PPGI complete in all respect. Above/ ODL18 35.00 Numbers 930.62 32571.70 AT Par 32571.70 Below/P

Description:- Dismantling of street light poles embedded in cement concrete foundation etc. duly digging around upto bottom of the pole and then taken out the pole complete in all respect. Above/ ODL19 25.00 Numbers 12703.08 317577.00 AT Par 317577.00 Below/P ar Description:- Fabrication, supply, Installation, testing & commissioning of outdoor type 415 volts Pre-Cooling cum 110 Volts battery charging box, made by 3 mm thick M.S. sheet and angle 40x40x5 mm. The box shall be outdoor type, wall/floor mounted type, weather, dust & vermin proof with

release 35 kA ,01 No 63 Amps 5 pin (3P+N+E) 415 volts panel mounted socket with spring loaded cover & 1 No. 16 Amps 3 pin (2P+E) 250 volts panel mounted socket with spring locked cover and 1 No. 16 Amps 3 pin (2P+E) 250 volts Plug, with 32 Amp Double pole DC MCB for working on 130 Volt DC supply, and 200 Amps AL bus bar for three phases & neutral should fixed with PVC sleeve colour coded. Note: -Box & all accessories as per Drg. No. L/CEE/NER/ GKP/09/01. IZZATNAGER DIVISION-ELECTRICAL/NORTH EASTERN RLY Above/ ODL 23 2500.00 Metre 35.39 88475.00 AT Par 88475.00 Below/P ar 16 Description:- Supply & fixing of PVC pipe 25 mm dia Conforming to IS:(Latest version) with accessories, Jn. Box etc. including cleating/ clamping/fixing on wall/ pillar at suitable interval etc. as per direction of Engg-In-charge. (for shelter, FOB) Above/ ODL 26 40.00 Numbers 8146.90 325876.00 AT Par 325876.00 Below/P ar Description:- Supply, fabrication, installation, testing & commissioning of out door type bus-bar

chamber, comprising of 125 A ,4 Pole MCCB and alumn. Bus-bar cross section (25mmx5mm) fixed on bus-bar insulator with top cover fixed with hinged & locking arrangement complete with red oxide primer & final painting with metal grey enamiled paint, complete in all respect. Box framing will be done by 40 mm x40mm x3mm angle iron. Above/ ODL27 2.00 Numbers 177000.00 354000.00 AT Par 354000.00 Below/P ar Description:- Supply, Installation, testing & commissioning of train lighting battery charger 300

with outgoing MCB/MCCB of suitable capacity, incoming voltmeter 0-500 volts, outgoing voltmeter 0-

indicating lamps for incoming supply as per RDSO Spec. No RDSO/PE/SPEC/AC/0008 (REV '2') 2010 or latest complete in all respect.