Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹40.7 L+₹6.9 L (20.6%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L2 | Rejected-Finance HIGH RATE |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
29 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI PRAVEEN KUMAR, IDSE
GE KHADAKWASLA NDA KHADAKWASLA PUNE-23
REPAIR / MAINT / UPKEEP OF E/M INSTALLATIONS UNDER ZONE A AND B AT NDA KHADAKWASLA
2023_MES_606865_1
8736/E8
Open Tender
Civil Works
Item Rate
180 days
GE KHADAKWASLA
As per tender documents
8 documents required · 8 mandatory
₹500
GE KHADAKWASLA
₹90,000
Yes
25 Sept 2023
29 Jun 2023
1 Aug 2023
29 Jun 2023
29 Jul 2023
17 Jul 2023
29 Jun 2023 - 16 Jul 2023
Amount
Dismantling fencing wiremesh/barbed wire any type complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed
M&L for lowering & laying in trench of Reinforced Cement Concrete pipes of 300mm bore, class NP3,spigot and socket ended pipes (IS:458-2003 marked) with and including rollon rubber ring gasket (Conforming to IS : 5382-1967 Type -I, aligning & jointing complete all as specified and directed
M&L for lowering & laying in trench of Reinforced Cement Concrete pipes of 450mm bore, class NP3,spigot and socket ended pipes (IS:458-2003 marked) with and including rollon rubber ring gasket (Conforming to IS : 5382-1967 Type -I, aligning & jointing complete all as specified and directed
S&F Galvanised chain link fencing, 3 mm nominal dia of wire, avg area of apperture 0.25 sqcm and/or weight of the fencing not less than 2.00 kg/sqm complete all as specified and directed
Fixing only MS galvanised chain link fencing, incl line wires any mesh, size and type to any type of standards, rails, straining bolts etc incl provision of binding wire complete all as specified and directed Note: Chain link fence obtained from dismantling shall be re used.
M&L 10 mm and above dia MS round bars cut to length bent to shape required etc..(to be used for stiffness to chain link) fixed indepdently to the angle iron post as complete all as specified and directed (Conforming to Fe 410w (Gde E-250) quality 'A' or Fe 290 (Gde E-125) complete all specified and directed.
S&F MS screw bolts (machine made 12 mm dia. Shank) with hexagonal or square heads at one end and screwed at another end, each screwed end to be fitted with washer and one hexagonal or square nut, exc. 5cm n. exc 10 cm in length complete all as specified and directed
Supply, fabricate and fixing in position angle iron posts for fencing posts and struts, split at bottom, cut to shape, including providing flat iron for securing wire mesh with necessary welding, drilling bolting or rivetting, complete all as specified and directed (Steel confirming to Fe-290 (Gde E-165) complete all as specified and directed.
Fixing only in position angle iron posts for fencing posts and struts, split at bottom, cut to shape, including providing flat iron for securing wire mesh with necessary welding, drilling bolting or rivetting, complete all as specified and directed. Note: angle iron obtained from dimantling shall be used under this item
Demolition of Precast cement concrete block/stone boulder walling built in CM or Cement lime Mortar complete all as specified and directed
M&L for precast cement concrete block masonry exc. 10 cm width with solid block C5 Grade and setting in cement mortar (1:6) complete all as specified and as directed
M&L for precast cement concrete block (Except block) masonry exc. 10 cm width with solid block C5 Grade and setting in cement mortar (1:6) complete all as specified and as directed Note: PCC blocks obtained from item no. 12 shall be used.
M&L for PCC (1:2:4) type B-0 (Using 12.5 mm graded stone aggregate) in coping, hold fast block including weathering slightly rounded and chamferred angle including necessary form work and finish of exposed surfaces of concrete as described in SSR Part-II) complete all as specified and directed.
M&L for cement concrete Type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in foundation,Mass concreting filling and mass concrete complete all as specified and directed
M&L for cement concrete Type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, Mass concreting filling and mass concrete complete all as specified and directed
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed
M&L broken hard core gauge, n exc 63mm deposited spread and leveled in layers n.exc 15cm thick water and rolled/rammed true surfaces (for rising of path level) complete all as specified and directed
Raking or cutting out Joints and decayed mortor etc ,washing the joints and keeping the surface to be pointed wet for 2 days prior to re-pointing in random rubble or polygonal rubble uncoursed or brought up to courses work built in cement mortor etc upto three storyed bldg or 20m height complete all as directed.
M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:4) upto and incl height 20m. Complete all as specified and directed. Note : Rates all as included for scafollding, shuttering, ladder etc
Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and directed
M&L for rendering 15mm thick cement plaster in CM( 1:4)on block/stone walling surface finished even and smooth without using extra cement complete all as specified and directed
Dismantiling timber 40 Sq.cm and over in section (unframed work), in any position complete all as specified and directed
S&F Framed work ornamental and intricate design such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 including removing old structure complete all as specified and directed
S&F portions framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; tubular steel, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 including removing old structure complete all as specified and directed
M & L running Welding in repairs and to make in original position of article in any length and thk of weld n exc 6 mm for purline, rafter, gate, chainlink fencing, fencing post , MS door, collapsible gate, rolling shutter and misc MS Items (Height of bldg G+3) complete all as specified and directed
M & L for taking down /dismantling and erection /resecuring in origional position of steel gate after repair of opening n.exc 7 mtr any weight incl welding of any parts new/old, welding of pintal hinges, providing new pintal hinges ,aldrop,handle where ever reqd, fixing of pintal hinges with RCC column/wall complete all as specified and directed
Servicing and repairs to exsisting rolling shutters at and at all heights above floor level of sizes mentioned below comprising of removing the exsisting hood cover, rectifying damages, removing all shafts along with bearings, springs, gears etc. reconditioning/ adjusting the tension of springs, rectifying damages, if any, to laths, grills flats, bottom plates guide channels, locking arrangements, handles including providing end clips and pins, welding where required reassambling the shutter, refixing the same in original position. Luberating all moving parts ,the new spare part shall be measure and paid separately, operating and commissioning the shutters to the entire satisfaction of the Engr-in-Charge. Note: Rate includes taking down and refixing of rolling shutter in same or other opening
M&L for Dubbing out average 15mm thick on irregular face of walls (when specificially ordered in writing) in CM (1:4) complete all as specified and directed
M&L Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:4) upto and incl height 20m complete all as specified and directed. Complete all as specified and directed. Note : Rates all as included for scafollding, shuttering, ladder etc
M&L for preparation of old plastered wall surfaces and applying one coat of distemper oil emulsion. including cleaning the spilled colour on the floor/skirting complete all as specified and directed
M&L for complete removal of existing treatment from wall including removing nails and similar article etc and fill up the holes and cracks with putty to make the surface free from dust, loose paint and loose plaster by scrapping manually as directed by Engineer-in-charge complete all as specified and directed.
M&L applying avg 1mm thick wall care putty on wall/ceilling in patch and prepare the surface even and smooth upto desired finishes complete all as specified and directed
M&L for preparation of suraces and applying two coats of distemper oil emulsion over a coat of primer including cleaning the spilled colour on the floor/skirting complete all as specified and directed
M & L for prepration of old treated surfaces and cleaning including removing nails and similar article etc and fill up the holes and cracks with putty with scraping, applying one coat of Exterion weather (apex ) paint including cleaning the spilled colour on the floor/skirting complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed
M&L for applying one coat of synthetic enamel paint including preparation of old steel/iron /angle Iron surface of any description over 10 cm in width or girth complete all as specified and directed
M&L for preparation of new/Old untreated concrete surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed
M&L for preparation of newly plastered/ concrete wall surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed
Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified and directed
M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like over 10 mm thk cement screed in CM (1:4)) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing complete all as specified and directed.
M&L for providing edge moulding with semi ciruler shape to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high glossY finish etc. complete all as specified and directed.
S&F in repairs 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to floor including clamp and weep hole etc complete all as specified and directed
Restraining and resecuring to existing barbed wire fencing including making good staples etc acomplete all as specified and directed
M&L for taking down existing water proofing treatment of any description and layers from wall/roofs including screed bed or bedding layers of mortar, concrete in any position complete and cleaning the surfaces by grinder to make it smooth and even, free from dust and scrubbing down with water complete all as specified and clearing the premises complete all as specified and directed. Note :- Cost of Disconnected , setting aside and refixing of tank any capacity while taking down existing treatment deemeed to be included as no water supply to users hampered
M&L for 15 mm thick Plaster on RCC roof slab with CM (1:4) including water proofing compound @ 3% by weight of cement shall be caried out complete all as specified and directed Note: supply of WPC will be measure and paid seperatly)
M & L for preparing plastered surfaces , applying uniform coat of primer@ 0.30Kg/Sqm and applying water proofing treatment on roof/ wall, edges and vertical surfaces, using 3 mm thick APP modified bitumen based prefabricated water proofing membrane reinforced with non woven polyster matt black finished weighing not less than 3.50 Kg/Sqm with torch application and 10 cm overlap both ways complete, further apply a coat of bituminious reflective alumium paint complete all as specified and directed
Supply only intergal water proofing compound complete all as specified and directed
Dismentaling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed
S& F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /clading to wall fixed with self taping screws complete all as specified and directed
Taking down and removal to stores of Rolling shutter of any description and any type but not exc 12 sqm each complete all as specified and directed
Supply and fix for Steel rolling shutters, thickness of lath 1.25mm, with gear operated type with bevel gear box and crank handle and with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed
S & F Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
S&F pressed steel door frames conforming to IS 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness size 125mm x 60mm profile B, one or more rebate including hinges, mortar guards, lock strike plate, shock absorbers complete all as specified and as directed.
S&F Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats -IInd class hardwood - Thickness of shutter 35mm complete all as specified and directed
S&F IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a), 35mm thick with synthetic enamal paint complete all as specified and directed
Taking down and removal to or stores for Chowkhats or frames not exc. 1.5 sq. m each complete all as specified and directed
Taking down and removal to or stores for Chowkhats or frames exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed
S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm/20 x 20 x25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and directed
M&L for 60 mm thick glossy finished cement concrete coloured interlocking pavers, pattern as approved, as in floors or pavements, laid on 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all manufacturer's instruction complete all as specified and directed
Dismantling of floor hearth, wall tiling incl cement mortar bedding( but not backing) removing of serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for Providing & Laying 300x300 Glazed Ceramic Matt Finish Tile of Thickness 8-10mm as per IS 15622:2017 of Group BIIa with water absorption between 3-6% set and jointed in neat cement slurry and pointed in coloured cement to match etc over 15mm thick cement screed bed in CM 1:6 complete all as specified and directed
M&L for Providing & Laying 600x300mm Glazed Ceramic Wall Tile of Thickness 8-10mm as per IS 15622:2017 of Group BIIa with water absorption between 3-6% set and jointed in neat cement slurry and pointed in coloured cement to match etc over 10mm thick cement screed bed in CM 1:4 complete all as specified and directed.
M & L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed
S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and directed
S&F factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as per specification and as directed.
S&F alumiium anodised barrel tower bollt of extruded section and fixed 200mm size complete all as specified and directed
S&F alumiium anodised barrel tower bollt of extruded section and fixed 150 mm size complete all as specified and directed
S&F 250 mm long mild steel sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding boltsof extruded sections complete all as specified and directed
S&F Butt hinges, medium weight, cold rolled, mild steel length of hinges 100 mm complete all as specified and directed
S&F 300mm mild steel ordinary rat rail rod pattern spring incl roller and plate complete all as specified and directed
S&F door stopper of aluminium alloy body and tounge anodised with hard down steel spring length of cover plate 150mm complete all as specified and directed
S&F extruded aluminium alloy handle fabricated type annodised size of handle 150 mm complete all as specified and directed
S&F extruded aluminium alloy handle fabricated type annodised size of handle 100 mm complete all as specified and directed
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire average width of apperture 1.18 mm complete all as specified and directed
S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty/fixed with wooden beads in square n exc 0.5 sqm in each pane complete all as specified and directed
Sunil Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .