GE/ALP (8465) KOLKATA OF 2025-26

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 sqm each of following size complete all as specified and directed.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames)Area exc 1.5 sqm but not exc 4 sqm each of following size complete all as specified and directed.

Taking down shutter and refixing in same opening size of shutter is exc 1.0 sqm not exc 2 sqm and complete all as specified and directed.

Resuring, Easing /adjusting without taking down shutter size of shutter is exc 1.0 sqm not exc 2 sqm complete all as specified and directed.

S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl both faces covered with decorative 1.5 mm thick sunmica with lapping and matching fixed with fevicol nails complete all as specified and directed.

S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type complete all as specified and directed.

S&F for second class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for in repair framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed alusters, wald ways, railings, framework of water tanks and similar work confrming to Fe-290 Gde -E 165 complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood polymer composite) solid door Frames of size 45 mm x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), mimimum compressive strength of 58 N / Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood polymer composite) solid flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N (Face) & 900 N (Edge), mimimum compressive strength of 50 N / Sqmm, modulas of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of termite / borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed.

S&F for 100 mm long butt hinge, stainless steel complete all as specified and directed.

S&F in repair 100 mm long butt hinge, stainless steel complete all as specified and directed.

S&F for aluminium anodised handles cast type, anodised 150 mm long complete all as specified and directed.

S&F in repair aluminium anodised handles cast type, anodised 150 mm long complete all as specified and directed.

S&F for aluminium anodised tower bolt cast type, anodised 200 mm long complete all as specified and directed.

S&F in repair aluminium anodised tower bolt cast type, anodised 200 mm long complete all as specified and directed.

S&F for 300 mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded or cast aluminium alloy complete all as specified and directed.

S&F in repair 300mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified and directed.

S&F in repairs mortice lock vertical type size 100 mm Brass 4 lever for wooden door(left/right)/aluminium door(vertical type) complete all as specified and directed.

S&F for second class hardwood 30 mm thick glazed skelton shutters open rebated and prepared to recive glass, gauze, etc. (without sash bars), edges of framing plain, chambered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR part-I section 8 clause 8.24 (a) supplied and fitted to chowkats all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete Gauzed with glazing bars, dovetailed or welded complete including taking down old steel window all as specified and directed.

S&F for PVC ventilator fixed type half portion 4 mm frosted glass and half portion stainless steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm including fixing of ventilator incl taking down old ventilator complete all as specified and directed.

Taking down aluminium door(any size) and refixing in same position ,change of pivot, beading, gasket, setting of door and change of damaged style /rail any length in aluminium section thickness not less 1.50 mm match with existing anodised /power coated complete and refixing in same position complete all as specified and directed.

S&F for floor door stopper of overall length of cover plate in 150 mm Aluminium alloy body abd tonuge with hard drawn steel spring complete all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and incl a coat of pink primer complete all as specified and directed.

M&L for preparing old wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paints complete all as specified and directd.

M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and incl a coat of red oxide primer complete all as specified and directd.

M&L for preparing old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paints complete all as specified and directd.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel / aluminium frames glazed with putty or fixed with beads complete all as specified and directed.

S&F for 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane complete all as specified and directed.

S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F for 4 mm thick figured glass / frosted glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F for 4 mm thick figured glass/frosted glass , pin headed type and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F for 10 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F for in repair solar control film 50 micron reflective type sticked to glass panes as per manufacturer's instructions complete all as specified and directed.

S&F for in repair 0.56 mm thick plain aluminium sheeting,alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut).

S&F in repair for 25 mm curtain rod fancy type Mild steel chromium plated with fancy brackets and knobs complete all as specified and directed.

M&L for Cub-boards shutters made with Particle board 18/19 mm thckness , medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber nframe work fixed with screws to timber frame-work complete all as specified and directed.

S&F for in repair stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples incl of dismentling complete all as specified and directed.

M&L in repair 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partions , fixed in repair complete al as specified.

S&F in repairs powder coated aluminum window (double shuttered double leaf) side hung type with stainless steel butt hinges, one shutter glazed and other shutter gauzed, rubber gasket, stopper, With aluminium grills of 70 mm aperture, aluminium anodised handle 100 mm long, aluminium anodised tower bolts 100 mm long and peg stay etc, size of aluminum frame shall be (100 mm x 38 mm x 1.55 mm) and shutter frame shall be (20 mm x 40 mm x 1.55 mm) after and including dismantling of existing unserviceable steel window complete all as specified and directed. Note : 1 No Glazed shutter(double leaf), 1 No Gauged shutter (double leaf) and aluminium grill shall constitute one unit.

S&F in repairs for Powder coated aluminium sliding windows for two track with powder coated aluminium standard beads / glazing clips, locking arrangement etc and aluminium frame of size 64 mm x 25 mm x 1.55 mm and s hutter of section 20 mm x 20 mm x 1.55 mm including (fixing of 4.8 mm thick glass) and taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions.

S&F for aluminium anodised (powder coated) Three track sliding window frame with shutters with (2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers including deco aluminium grill with the following section of frame and shutter:- (A) Sections for shutter :- (i) 'Vertical' section 38 x 20 x 1.10 mm thick. (ii) 'Interlock' section 38 x 20x 1.50 mm thick. (iii) 'Top/ Bottom' section 41 x 20 x 1.20 mm thick. (B) Section for frame :- (i) Top & Sides 92.36 x 29.70 x 1.50 mm thick. (ii) Bottom 92.36 x 29.70 x 1.50 mm thick complete all as specified and directed.

S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws complete all as specified and directed.

S&F Anodised powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators or aluminium frame for partition works etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868) of approved design/pattern, with approved standerd section and fix to the existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer in charge. (only weight of grill to be measured for payment) complete all as specified and directed.

S&F for in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg complete all as specified and directed.

S&F for in repairs double action door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair 5 mm thick beveled edge best quality looking mirror of size (600x450) mm fixed with screws complete all as specified and directed.

S&F in repair only 4 mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

M&L for suspended false ceilling system using metalic (E-grid) exposed suspende system, grid section size 600 mm x 600 mm comprising of GI powder coated main runner of dimension 39 mm x 24 mm x 0.80 mm thick (thickness comprising of GI/0.4+ PPPCGS / 0.3mm & weight of Runner 1.35 kg for 3600 mm length) Cross Tee of dimensions 29 mm X 24 mm x 0.8 mm thick wall angle 22.2 mm x22.2 mm x 0.65 mm thick (thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 4 mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 2 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt- 0.007 Kg/clip) hold down clips (Wt - 0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed.

S&F in repair stainless steel door lock safety type for glass door lock fixed in glass door lock (bottom) complete all as specified and directed.

S&F in repair stainless steel handle fancy type for glass door size 250 mm long,10 mm round fancy type any shape complete all as specified and directed.

S&F in repair stainless steel soap dish fixed in wall with screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid, joint free, coloured ceramic tiles 6-7mm thick (Square/Rectunglar),Area of each tile exc 0.11 Sqm but not exc 0.18 Sqm. as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in cement mortar (1:4), area of each tiles shall be of following complete all as specified and directed.

M&L for coloured, glazed ceramic tiles size (450 mm x 300 mm x 6-7mm) thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over10 mm thick rendering in cement mortar (1:3) complete all as specified and directed.

M&L for light shade Vitrified ceramic tiles 9-10 mm thick (Sqr/ rectangular) Polished, area of each tiles n.exc. 0.36sqm, in floors etc. set and jointed in neat cement slurry over a bedding layer of scread bed 15 mm thick in cement mortar 1:4 and pointed in white/colour cement to match complete all as specified and directed.

M&L for Granite(of any type) tiles 20 mm thick for slab machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over 15 mm thick screed bed in cement mortar (1:4) including grinding & polishing fixed in slab/steps complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash brick straight or curved on plan exc. 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B1 (20 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick plastering on other than fair faces of wall surfaces in cement mortar (1:4) surface finished even and fair complete all as specified and directed.

M&L for 15 mm thick plastering on fair faces of brick wall and concrete surfaces in cement mortar (1:4) surface finished even and fair complete all as specified and directed.

M&L for Rendering on ceiling 5 mm thick in cement mortar (1:3) on of concrete surface finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying one coat of acrylic distemper with wall care putty complete all as specified and directed.

M&L for preparing and removing existing surfacesn new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coat of acrylic distemper with wall care putty complete all as specified and directed.

M&L for preparation of decorated Ceiling & applying two coats of acrylic oil emulsion distemper complete all as specified and directed.

S&F in Repairs Towel rail 600 mm long of brass chromium plate 20 mm dia fixed with and including chromium plated brass screws & wooden/plastic cleats complete all as specified and directed.

S&F in Repairs Towel rail 600 mm long of PTMT 20 mm dia fixed with and including chromium plated brass screws & wooden / plastic cleats complete all as specified and directed.

Dismantling of plain or corrugated aesbestos sheet any gauge, thickness in roof coverings complete all as specified and directed.

S&F for Pre painted galvalume aluminium zinc coating GI based corugated steel sheet 0.50 mm thick Hi-Rib colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F for Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick Hi-Rib colour having tensile strength of 550 Mpa as in roof covering / cladding to wall/valley gutter fixed with self tapping screws complete all as specified and directed.

S&F in repair Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel' and complete all as specified and directed.

Demolation of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) complete all as specified and directed.

M&L for RCC (Nominal Mix) in type-B1 (1:2:4) (20 mm graded stone aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming complete all as specified and directed.

Dismantling of old unserviceable water tank, removing from site, Supply and fixing of rotational moulded polythene water storage tank 1000 litre capacity ISI marked (cylindrical, vertical, double layered with closed top) hoisted and fixed in position including PVC float valve 20 mm bore weight not less than 210 gms. complete all as specified and directed.

Dismantling of old unserviceable water tank, removing from site, Supply and fixing 2000 Litre capacity rotational moulded polyethylene water storage tanks (multilayer.cylindrical vertical with closed top) with and including 50 mm dia PVC float valve hoisted and fixed in position complete all as specified and directed.

M&L for L-shaped rubberised corner guard for sharp vertical edges of length 1000mm, width (100 x 100)mm reflective type of thickness 10mm complete all as specified and directed.

RST ENTERPRISE (BID ID -3339500)

GOODWILL AND CO. (BID ID -3338576)