Retrofitting of Shirade Water Supply Scheme Tal Maval Dist Pune under JJM Open Class 8514856

SUB-ESTIMATE NO : 1 3 HP Submersible RAW Water Pumping Machinery From UKSAN DAM TO PRO ESR & EXIST GSR SHIRDHE GAOTHAN Item No : - 1 Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283,with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. Submersible Pump set Cap- Cap- 3 HP, Q- 1.96 LPS, Head-51 m ( with Mech Seal) UKSAN DAM TO PRO ESR SHIRDHE GAOTHAN

Item No : - 2 Providing & erecting 50 mm P.N. 1.0 C.I D.F sluice valve con to I.S, 14846-2000 with all necessary jointing material as per detailed specifications

Item No. : - 3 Designing, Providing, Erecting, Testing & Commissioning 50 MM dia ,Cast Steel,D.F. Reflux valve of Class 150 rating generally conforming to IS- 5312, Part I with renewable gun metal sealing face on swing door without bypass arrangement as per detailed specifications enclosed.

Item No. : - 4 Providing and supplying 20 mm dia Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete.

Item No. : - 5 Providing erecting 63 MM HDPE 8 KG Pipe for suction & delivery

Item No. : - 6 Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications.

Item No. : - 7 Designing , Providing ,erecting commissioning with test & trial of Pressure gauge of 100 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe

Item No. : - 8 LT Panel Board 3 HP: Providing erecting L.T. Panel board as per detailed specifications

A) 4C x 10 sq.mm Aluminium conductor, XLPE / PVC insulated & armoured cable PUMP to Panel

B) 3C x 2.5 sq.mm Copper Submersible cable from starter to 3 Hp Pump

C) Supplying & laying (including excavation) 50 cm outside dia. Double wall corrugated pipes (DWC) - for underground cable H/W to WTP

D) For Floating Pump Arrangement And Other Material For Fixing The Pump

Item No. : - 10 Providing Erecting MS Structural steel work, ISMB for Pumpset Foundation

Item No. : - 11 Providing & making plate type earthing of 60 x 60 x 0.6 mm G.I. earth plate with chember as per IE rules & as per detailed specification.

Item No. : - 12 GI Earthing strip/ Wires

Item No. : - 13 Providing Tools

Item No. : - 14 Indoor Light fittings

SUB-ESTIMATE NO : 1.2 7.5 HP Submersible Pure Water Pumping Machinery FROM UKSAN DAM TO PRO ESR THORAN , JAMBHAVALI & EXIST. GSR KONDESHWAR MANDIR Item No. : - 2 Providing & erecting 50 mm P.N. 1.0 C.I D.F sluice valve con to I.S, 14846-2000 with all necessary jointing material as per detailed specifications

Item No. : - 3 Designing, Providing, Erecting, Testing & Commissioning 50 MM dia ,Cast Steel,D.F. Reflux valve of Class 150 rating generally conforming to IS- 5312, Part I with renewable gun metal sealing face on swing door without bypass arrangement as per detailed specifications enclosed.

Item No. : - 4 Providing and supplying 20 mm dia Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete.

Item No. : - 5 Providing erecting H.D.P.E Pipe for suction & delivery

Item No. : - 6 Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications.

Item No. : - 7 Designing , Providing ,erecting commissioning with test & trial of Pressure gauge of 100 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe

Item No. : - 9 Providing erecting commissioning of cable A) 4C x 10 sq.mm Aluminium conductor, XLPE / PVC insulated & armoured cable PUMP to Panel

C) Supplying & laying (including excavation) 50 cm outside dia. Double wall corrugated pipes (DWC) - for underground cable H/W to WTP

D) For Floating Pump Arrangement And Other Material For Fixing The Pump

Item No. : - 11 Providing Erecting MS Structural steel work, ISMB for Pumpset Foundation

Item No. : - 12 Providing & making plate type earthing of 60 x 60 x 0.6 mm G.I. earth plate with chember as per IE rules & as per detailed specification.

Item No. : - 13 GI Earthing strip/ Wires

Item No. : - 14 Providing Tools

Item No. : - 15 Indoor Light fittings

SUB-ESTIMATE NO : 1.3 3 HP Submersible Pure Water Pumping Machinery FROM UKSAN DAM TO PRO ESR SOMAVADI Item No. : - 1 Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. Submersible Pump set Cap- Cap- 3 HP, Q- 1.06 LPS, Head-55 m

Item No. : - 2 Providing & erecting 50 mm P.N. 1.0 C.I D.F sluice valve con to I.S, 14846-2000 with all necessary jointing material as per detailed specifications

Item No. : - 3 Designing, Providing, Erecting, Testing & Commissioning 50 MM dia ,Cast Steel,D.F. Reflux valve of Class 150 rating generally conforming to IS- 5312, Part I with renewable gun metal sealing face on swing door without bypass arrangement as per detailed specifications enclosed.

Item No. : - 4 Providing and supplying 20 mm dia Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete.

Item No. : - 5 Providing erecting 63 MM 8 KG . Pipe for suction & delivery

Item No. : - 6 Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications.

Item No. : - 7 Designing , Providing ,erecting commissioning with test & trial of Pressure gauge of 100 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe

Item No. : - 8 LT Panel Board 3 HP: Providing erecting L.T. Panel board as per detailed specifications

Item No. : - 9 Providing erecting commissioning of cable A) 4C x 10 sq.mm Aluminium conductor, XLPE / PVC insulated & armoured cable PUMP to Panel

B) 3C x 2.5 sq.mm Copper Submersible cable from starter to 3 Hp Pump

C) Supplying & laying (including excavation) 50 cm outside dia. Double wall corrugated pipes (DWC) - for underground cable H/W to WTP

D) For Floating Pump Arrangement And Other Material For Fixing The Pump

Item No. : - 10 Providing Erecting MS Structural steel work, ISMB for Pumpset Foundation

Item No. : - 11 Providing & making plate type earthing of 60 x 60 x 0.6 mm G.I. earth plate with chember as per IE rules & as per detailed specification.

Item No. : - 12 GI Earthing strip/ Wires

Item No. : - 13 Providing Tools

Item No. : - 14 Indoor Light fittings

SUB-ESTIMATE NO : 2 RAW WATER RISING MAIN FROM UKSAN DAM TO PRO ESR SHIRDHE GAOTHAN & PRO ESR SOMAVADI Item No. : - 2 Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R.,complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading , unloading excluding GST levied by GOI & GOM in all respect etc.complete as per IS 9523.

Item No. : - 3 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Item No. : - 4 Providing and supplying at site ductile iron / Spheroi- dal Graphite (S.G.) iron single / Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. 25 MM

Item No. : - 5 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Item No. : - 6 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Item No. : - 7 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Item No. : - 8 Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc.complete.

Item No. : - 9 Filling in plinth and floors murum bedding in trenches with approved murumb from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete.

Item No. : - 10 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge 90 mm HDPE 6 KG& 8 KG/CM^2

Item No. : - 11 Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. 90 mm HDPE 6 KG& 8 KG/CM^2

Item No. : - 12 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. 25 MM Air Valve Single Ball

Item No. : - 13 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete upto 150mm

Item No. : - 14 Providing and laying in situ Cement Concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. M-150

Item No. : - 15 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete.

SUB-ESTIMATE NO : 3 RAW WATER RISING MAIN FROM UKSAN DAM TO PRO ESR THORAN ,JAMBHAVALI& EXIST.GSR KONDESHWAR MANDIR Item No. : - 1 Providing DI pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S.specification inclusive cost of jointing materials(Rubber gasket of EPDM Quality) Excluding GST lived by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work,unloading, stacking etc. completed as directed by Engineer –in-charge (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition / revision with amendments for Rubber Gaskets. 110 mm HDPE 10 KG/CM^2

Item No. : - 2 Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R.,complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading , unloading excluding GST levied by GOI & GOM in all respect etc.complete 80 to 300 mm Dia

Item No. : - 3 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Item No. : - 4 Providing double flange sluice valve confirming for IS14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 50 mm dia for washout

Item No. : - 5 Providing and supplying at site ductile iron / Spheroi- dal Graphite (S.G.) iron single / Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. 25 MM Single ball Flanged/Screwed Type Air Valve

Item No. : - 6 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Item No. : - 7 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Item No. : - 8 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Item No. : - 9 Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete.

Item No. : - 10 Filling in plinth and floors murum bedding in trenches with approved murumb from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete.

Item No. : - 11 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge

Item No. : - 12 Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. 110 mm HDPE 10 KG/CM^2

Item No. : - 13 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. 25 MM Air Valve Single Ball

Item No. : - 14 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete upto 150mm

Item No. : - 15 Providing and laying in situ Cement Concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) M - 150

Item No. : - 16 Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 50 mm dia for washout

Item No. : - 17 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. c) As above of 60x90cm internal size and depth upto 120 cm with Precast RCC slab coner

Item No. : - 18 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete.

SUB-ESTIMATE NO : 3 RCC ESR OF CAP- 15000 LITERS AT SHIRDHE GAOTHAN Item No. : - 1 Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge. ESR of capacity 0.15 LAC LIT. Cost UPTO 0.25 LL Liter Capacity

Item No. : - 2 Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-incharge.(a) Inlet pipe 80mm dia C.I. D/F pipes

(b) Outlet pipe 80 mm dia C.I. D/F pipes

(e) Overflow pipe 80mm dia C.I. D/F pipes

Item No. : - 3 Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all re- spect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen-tal store, unloading stacking etc. complete. C.I D/F Specials for above pipes

Item No. : - 4 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Item No. : - 5 Providing double flange sluice valve confirming for IS- 14846 including worn geaarrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valve PN-1.0 without bypass(b) For Outlet 80 mm dia

(c) For Washout 80 mm dia

(d) For bypass arranement 80 mm dia

SUB-ESTIMATE NO : 3.3 RCC ESR OF CAP- 20000 LITERS AT THORAN Item No. : - 1 Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge.ESR of capacity 0.20 LAC LIT. Cost UPTO 0.25 LL Liter Capacity

Item No. : - 2 Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-incharge. (a) Inlet pipe 80mm dia C.I. D/F pipes

(b) Outlet pipe 80 mm dia C.I. D/F pipes

(e) Overflow pipe 80mm dia C.I. D/F pipes

Item No. : - 3 Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all re- spect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen-tal store, unloading stacking etc. complete. C.I D/F Specials for above pipes

Item No. : - 4 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Item No. : - 5 Providing double flange sluice valve confirming for IS- 14846 including worn geaarrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valve PN-1.0 without bypass (b) For Outlet 80 mm dia

(c) For Washout 80 mm dia

(d) For bypass arranement 80 mm dia

SUB-ESTIMATE NO : 3.3 RCC ESR OF CAP- 20000 LITERS AT SOMAVADI Item No. : - 1 Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge.ESR of capacity 0.20 LAC LIT. Cost UPTO 0.25 LL Liter Capacity

Item No. : - 2 Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-incharge. (a) Inlet pipe 80mm dia C.I. D/F pipes

(b) Outlet pipe 80 mm dia C.I. D/F pipes

(e) Overflow pipe 80mm dia C.I. D/F pipes

Item No. : - 3 Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all re- spect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen-tal store, unloading stacking etc. complete. C.I D/F Specials for above pipes

Item No. : - 4 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Item No. : - 5 Providing double flange sluice valve confirming for IS- 14846 including worn geaarrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valve PN-1.0 without bypass (b) For Outlet 80 mm dia

(c) For Washout 80 mm dia

(d) For bypass arranement 80 mm dia

SUB-ESTIMATE NO : 3.4 RCC ESR OF CAP- 17000 LITERS AT JAMBHAVALI Item No. : - 1 Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge.ESR of capacity 0.17 LAC LIT. Cost UPTO 0.25 LL Liter Capacity

Item No. : - 2 Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-incharge. (a) Inlet pipe 80mm dia C.I. D/F pipes

(b) Outlet pipe 80 mm dia C.I. D/F pipes

(e) Overflow pipe 80mm dia C.I. D/F pipes

Item No. : - 3 Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all re- spect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen-tal store, unloading stacking etc. complete. C.I D/F Specials for above pipes

Item No. : - 4 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Item No. : - 5 Providing double flange sluice valve confirming for IS- 14846 including worn geaarrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valve PN-1.0 without bypass (b) For Outlet 80 mm dia

(c) For Washout 80 mm dia

(d) For bypass arranement 80 mm dia

SUB-ESTIMATE NO : 04 PROVIDING ONLINE FILTER DesigningProviding. Commissioning Online Drinking Water filtration Plant on turn key basis for rural water supply schemes of following capacity. The item includes Chlorine dosing system. |Pressure sand filter, Activated carban filter, including| providing necessary media for sand filter and carbon filter providing and laying necessary interconnecting UPVC| Piping including giving necessary hydraulic and water quality testing ete compiete as directed by Engineer-incharge. The rate includes loading, unloading at site, all taxes/excise and other duties, Fright & octroi, insurance. tranportation, storage facility, welding facility, temporary |electrical connection/hire charges, chemicals required for commissioning, Electrical work, Cabling, Cable Tray etc. up to panel, Earthing to all motors, third party inspection charges, Transit insurance, all other insurance at site and| 3rd party liability and public liability etc. alongwith 1 months warrenty period. the rate also includes operation &| maintenanace by trained and skilled manpower for a period| of 24 Months including record keeping, log books. |Laboratory reports. Supplying Testing and Capacity 5 m3/Hr

SUB-ESTIMATE NO : 5 PROVIDING DISTRIBUTION SYSTEM MS Special Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. All socketed specials or socketed branch flanged specials of all diameters.

Providing double flanged sluice valves Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle caps taxes transportation levied by GOI & GOM in all respect etc.complete Without by pass arrangement - PN -1 A)Sluice valve PN-1.0 (without by pass arrangement) 50 mm dia

65 mm dia

80 mm dia

Hydraulic testing of HDPE pipe line Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 63 MM

Providing and laying in citu cement concrete Providing and laying in citu cement concrete Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) PCC - M-150

Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 50 mm

Road Box Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 225 mm x 300 mm (40 kg)

Making Property connections Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour, UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mm respective Dia Heavy duty Brass/Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by Engineer inFor MDPE/UPVC Pipe Service Connection on Disribution main For 15 mm dia. Connection on HDPE Pipes (Without Road Crossing)

For 15 mm dia. Connection on HDPE Pipes (With Road Crossing)

Lettering for informatory sign boards etc. complete.

SUB-ESTIMATE NO : 6 TRIAL RUN AND MAINTENANCE OF SCHEME Commissioning, running and maintaing the scheme to its rated capacity, including providing necessary personnel such as operator, valveman,labour etc as per requirement of the scheme for a period of 1 Month together with training to the Local Body maintenance staff and handing over the scheme to local Body after completion of the above period as directed by Engineer-in-charge.

Please Enable Macros to View BoQ information