Providing Highmast light 12mtr near Tidel park ward 3 in Thirumuruganpoondi Municipality

Amount

Supply and Fixing of 12m height High mast system with all accessories mast shaft fully hot dip galvanized and should with stand wind velocity of 160 km per hour the mast should included head frame ss wire rope 6mm dia double drum winch galvanized lantern carriage arrangement suitable to carry 8 nos of luminaries with control gear box and flexible multi core traling cable as specified in the relavant IS Conditions with built-in non flame proof power tool for simultaneous up ward and down ward movement of lantern carriage complete.

Supply and fixing of LED Flood Light 150W with Integrated Driver

Supply, Laying and Jointing of 4 Core X 16 Sqmm Armored Aluminium Under ground Cable From Feeder Pillar To mast as Directed By Department Officers.

Supply and Laying of 75mm PN 10 HDPE Pipe

Supply and fixng of TNEB meter board suitable for 3 hase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete (SD 129)

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD-69)

Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 14 SWG TC wire with painting of suitable colour (SD 62)

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.

Supply and delivery of MS sheet fabricated 63 A feeder pillar unit with input busbar, Highmast motor mounted up and lowering provisions, safety triping, automatic, Manual ON, Off control with necessary fuse unit and MCBs including erection charges etc complete as directed by the departmental officers

Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification.

Plain Cement concrete 1:4:8 mix (One cement four Crushed Stone Sand and eight aggregate) using 40 mm ISS metal including mixing, laying, consolidating curring cost and conveyance of all materials to site and all labour charges etc., complete as per standard speicification

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc. Centering for soffits of RCC slabs plain surface including strutting upto 3.29 meter height using mild steel of size 90 cm x 60 cm x 10 gauge with MS angles of size 25 mm x 2 mm x 3 mm laid over silver oak (CW) joists of size 10 cm x 6 cm spaced upto 90 cm c/c and supported casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specification and as directed by the departmental officer

Reinforced cement concrete 1:1 1/2:3 mix using 20 mm ISS metal (One cement one and half Crushed Stone Sand and three aggregate) from the approved quarry including mixing, laying, consolidating curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Supplying and fabrication placing in position of M.S. (or) RTS rods for required size and length as directed by the deparmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification

Fly Ash Bricks 230 x 110 x 70mm in Cement Mortar 1:5 (One cement and five m.sand) including curing neat finishing, etc., complete complying with standard specification.

Plastering with cement mortar 1:5 mix (One cement and five Crushed Stone Sand ) to 12 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

ADD(GST 18%)

M.RAVINDRAN (BID ID -1525939)