SPECIAL REPAIRS TO BLOCK NO 10 AT GORKHA CAMP OF 18 QTRS AT MH WELLINGTON UNDER GE WELLINGTON

Amount

Taking down PVC / wooden chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down PVC / wooden chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr all as specified and directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm each all as specified and directed.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

35 mm thick flush shutter, solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer on both sides with lipping/ frame to match, complete all as specified and as directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing as mentioned in SSR all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame made up of tubes shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as mentioned in SSR drawing all as specified and directed.

Pressed steel windows with Glazed and Wiremesh shutter (Double leaf, Gauged and Glazed) with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. Note: i) The plain area of opening shall be measured as one sqm ii) Glass and wire mesh shall be measured and paid separately.

Pressed steel ventilators with top hung shutters including Box type hinges with steel handle and steel peg stay, complete all as specified and directed.

4 mm thick sheet glass, ordinary quality and glazing with oil putty and beads in squares not exceeding 0.5 sq. m in each pane all as specified and directed.

Applying two coats of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or girth over a coat of pink primer including preparation of surface complete all as specified and as directed.

Preparation of new or untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Preparation of old steel surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

preparation of old wooden surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Butt hinge, 100 mm long medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Extruded aluminium alloy handles 150 mm long, fabricated type, anodised complete all as specified and as directed

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed.

Mild steel hold fast conforming to Fe-290 Gde-165 all as specified and directed.

PCC type C1, 1:3:6 using 20mm graded stone aggregate bed blocks for hold fast, and like of any description, over 10mm in width or girth not otherwise described all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor and including fixed in repairs all as specified and as directed.

Taking down unserviceable hinges from steel windows and fixing new box type hinges by welding making easy opening and closing including painting and refixing window in same opening and making good to existing surface all as specified and directed.

Aluminium handles, cast type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and directed.

150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed in repairs complete all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Preparing surfaces of small articles such as stop, covers, gully, gratings, hold fast, etc area not exceeding 0.1 Sqm each of any description and grith, not otherwise described and treated with or coal tar black paint all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm nd fixed with tinned or galvanised wire staple all as specified and directed.

Dismantling boarding/ ceiling board of any description fixed with nails complete all as specified and directed.

18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.

External teak wood lipping, 6mm thick fixed with nail complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 40mm complete all as specified and directed.

Aluminium handles, anodised, extruded section 75mm long all as specified and directed.

Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and directed.

Fancy type decorative drapery rod 20 mm dia including side caps and brackets, as in repairs complete all as specified and directed.

Latches of 75 mm size rim latches with two lever of brass body.stove enamelled finish, with brass knob or lever handle all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 on fair face of brick or concrete surface complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vetrified tiles light shade 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vitrified tiles light shade 10mm thick as in skirting/ dado etc (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Granite slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Machine cut polished kota stone slab flooring/ cills 20-25mm thick over and including 15mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish, complete all as specified and directed.

Machine cut polished kota stone slab 20-25mm thick over cement screed base as in riser, skirting, dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls/ ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed

Rendering 15mm thick on stone masonry surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and as directed.

Rendering 5mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) in ceiling finished even and smooth without using extra cement complete all as specified and directed.

Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in cement mortar, not previously plastered and scrubbing down with water etc to receive plaster, complete all as specified and as directed.

Rendering 15mm thick in two layers on stone masonry surfaces or surface other than fair face of brick work in cement mortar 1:4, first coat 5mm thick and second coat 10mm thick mixed with WPC finished even and smooth without using extra cement), mixed with water proofing compound complete all as specified and directed. Note: 1. Liquid WPC shall be measured and paid separaterly.

Supply only liquid water proofing compound all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion Paint (Anti Fungal) white or tinted over a coat of primer and including one coat of external wall care putty smooth finish complete all as specified and as directed.

Preparing surfaces, plastered or unplastered on new wall surface and applying three coats of white wash complete all as specified and directed.

Applying two coats of oil bound distemper over a coat of primer over and including a coat of wall care putty in two layer, 2-3mm thick on newly plastered wall surface including preparation all as specified and directed.

Preparation of new ceiling surfaces and applying two coats of oil bound distemper including one coat of primer over and including one coat of putty in two layer, 2-3mm thick in two layers complete all as specified and directed.

Preparing surfaces, plastered or unplastered on new ceiling surface and applying three coats of white wash complete all as specified and directed.

Complete removal of existing treatment of wall surface and applying one coat of primer (water thinable/ solvent thinable) over and including one coat putty in two layers 2-3mm thick even and smooth and applying two coats of oil bound emulsion distemper (washable) complete all as specified and directed.

Complete removal of existing treatment of ceiling surface and applying one coat of primer over and including one coat putty even and smooth and applying two coats of oil bound emulsion distemper (washable) complete all as specified and directed.

Preparation of old decorated plastered or unplastered surface of ceiling by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coats of white wash on ceiling complete all as specified and directed.

Preparation of old decorated plastered or unplastered surface of walls by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of white wash on walls complete all as specified and directed.

Supply fix and repairs to Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and directed.

Vitreous china squatting pan Orrissa pattern size 580mmx 440mm white with integral foot rest with 'p' or 's'trap including flush pipe PVC 32 mm dia, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc, and making good to floors, fixed in repairs, complete all as specified and directed

PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Long body bib tap fancy type Chormium plated fixed to 15mm dia in repairs,complete all as specified and as directed. Make :- Cat No. CON-107KN of Jaquar or equivalent

Brass CP Wall mixer for mixing hot & cold water with provision of over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges screwed down for iron pipe 15mm dia bore and fixed in repairs complete all as specified and as directed. Make : Cat No. CON- 273KNUPR of Jaquar or equivalent

Over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 450 mm long and fixed in repairs complete all as specified and as directed. Make: Payag Cat No BOS-90S or equivalent

Bib tap fancy type long body chromium plated 15mm dia complete including fixed in repairs all as specified and directed Make : Cat No. CON- 037KN/ 047KN of Jaquar or equivalent

Vitreous china Counter Wash Hand Basin with fixing accessories, any shape size not less than 480x370x200 mm including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore Pillar Tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed completeincluding fixed in repairs all as specified and directed.

Angular stop cock with wall flange for 15mm dia of chorumium plated fancy type in repairs complete all as specified and directed. Make : Cat No. CON- 059KN of Jaquar or equivalent

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Soap dish complete fixed in repairs all as specified and directed. Make: Cat No. ACN- 1131N of JAQUAR or equivalent

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store for 15mm bore pipe all as specified and directed

Taking up or down steel tubing and connections including cleaning for refixing or removal to store for 20mm bore pipe all as specified and directed

Supply, laying and testing concealed steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified of size 15mm all as specified and directed

Supply, laying and testing concealed steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified of size 20mm all as specified and directed

Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repairs of size 20mm dia (Minimum weight 20mm-210gms) complete all as specified and directed.

Gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe including fixed in repairs of size 20mm dia all as specified and directed.

Dismantling PVC water tank exceeding 250 ltrs and not exceeding 500 Ltr capacity from existing position all as specified and as directed.

Rotational moulded polyethylene water storage tank of capacity 1000 Ltr (cylindrical vertical with closed top) three layers, hoisted and fixed in position with proper inlet and outlet connections all as specified and as directed

Stainless steel plate track of size 0.9m X 1.2m complete all as specified and as directed.

Demolition and breaking up drain pipes of any description of any size complete all as specified and as directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls, with PVC clamps complete all as specified and as directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls, with PVC clamps complete all as specified and as directed.

PVC (SWR) bends 110 mm any radius, complete all as specified and as directed.

PVC (SWR) bends 75mm any radius, complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia with access door complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia with access door complete all as specified and as directed.

PVC (SWR) branch piece single, (single Y) equal or un equal of 110mm bore of pipe complete all as specified and directed

PVC (SWR) branch piece, (single Y) equal or un equal of 75mm bore of pipe complete all as specified and directed

PVC (SWR) branch piece, (double Y) equal or un equal of 75mm bore of pipe complete all as specified and directed

Stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified.

Stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 100mm bore of pipe, complete all as specified.

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed

PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4,complete all as specified and as directed.

Demolition of reinforced cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

75mm thick plain Cement concrete, 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection and hard standing finish even and fair complete all as specified and directed.

Rendering 15mm thick on fair face of brick work or concrete surfaces in cement mortar 1:3 at sunken floor finished smooth and even without using extra cement including using liquid integral WPC as per manufacturers instructions complete. Note: Supply of liquid intergral water proofing compound will be measured and paid seperately.

Applying for waterproof and damp proof treatments a uniform coat of blown grade bitumen 85/25 @ 1.20 Kg per Sqm conforming to IS 702/cold applied bituminious elastomeric coat over a coat of primer in sunken floor including cleaning surfaces all as specified and directed.

Priming surfaces with a coat of primer @ 0.70Kg per Sqm over plastered surfaces and applying heavy treatment (for severe conditions) conforming to IS 3384 in sunken floor all as specified and directed.

APP modified prefabricated five layer water proofing membrane, 3mm thick and weighing not less than 3.6 kg/Sqm laid on bituminous surface by forced application complete in sunken floor all as specified and directed.

20mm thick cement mortar 1:4 screed mixed with liquid proofing compound over APP membrane in sunken floor all as specified and directed. Note: Supply of liquid integral water proofing compound will be measured and paid separately

40mm dia light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor all as specified and directed.

Lean concrete 1:5:10 type E2 with 40mm graded stone aggregate with lime mortar 1:3 filling in sunken portion all as specified and directed.

Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Plain cement concrete in surface channels and drains finished even and smooth of type D-2, 1:4:8 using 40mm graded stone aggregate complete all as specified and directed.

Demolition of cement Concrete of any description and in any position including padding concrete of roof/ chajjas all as specified and directed.

Providing cement concrete 1:2:4 type B0 using 12.5mm graded aggregate average thikness 50mm as in levelling / padding course on roof slab , projections on similar surfaces existing with slope, making the surface even and smooth using extra cement all as specified and directed.

Rendering 10mm thick on roof slab / fair faces of brick work or concrete surface in cement mortar 1:3 laid over the RCC roof slab, parapet wall when the concrete is green at an height and making the surface fair and even without using extra cement using liquid integral WPC as per manufacturer's instructions complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.

APP modified prefabricated polymeric membrane 4mm thick and weighing not less than 4.5 Kg / Sqm reinforced with non woven polyster / HMHDPE matt black finished weighing not less than 100 gm/sqm having softining point not less than 140 degree celsius longitudinal tensile strength not less than 300N / Sqcm, side lap & end lap 10cm, with trch application of membrane, over compatible primer @0.40 Ltr/Sqm and finishing with aluminium paint applied @0.10 Kg/sqm finished complete all as specified and directed.

Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including fixed in repairs all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC concealed / surface conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/ Ex-fan point controlled by one 5Amps one way switch all as specified and directed. Note: Cutting chasing of wall / floor will be measured and paid separately.

All as per Item No 124 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

ll as per Item No 124 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 124 hereinbefore but point wiring complete with 4 sqmm for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC casing and caping complete with fittings/ accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light /Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

All as per Item No.128 hereinbefore but One 3 pin 5A switch socket outlet on independent Board with cable 1.5Sqmm size all as specified and directed.

All as per Item No 128 hereinbefore but One 3 pin 5A Socket outlet on same board with cable 1.5Sqmm size complete all as specified and directed

All as per Item No 128 hereinbefore but point wiring complete with 4 sqmm for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note :1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

All as per Item No 132 hereinbefore but One 3 pin 5 Amps socket out let on independent Board all as specified and directed.

All as per Item No 132 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No.132 hereinbefore but point wiring complete with 4 sqmm for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

All as per Item No.132 hereinbefore but point wiring complete One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings all as specified and directed.

Bell Multi Music type 230 volts single pole all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular Bell push 6A 230V, AC 50 Hz SP One module all as specified and directed

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 145 hereinbefore but 16 way all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 20 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 147. hereinbefore but SPN 230V 32 Amps capacity all as specified and directed.

All as per item No. 147. hereinbefore but SPN 415V 40 Amps capacity all as specified and directed.

All as per item No. 147. hereinbefore but MCB TPN 415V 63 Amps capacity all as specified and directed.

Supply and fix 10W LED lamp, B-22, 5 star lamp, lumen 1200 & 6000K holder type all as specified and directed. Make Havells Cat Part No-LHLDEUEBML8Z010 / Phillps/ CG

Taking down old unsv FTL fittings, Supply and fix 22W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. HavellsCat Part No. LHEXBLP7PN1W022 / CG/ Philips / Bajaj.

All as per item No. 152 hereinbefore but 25 Watts Make. HavellsCat Part No. LHEXACP7IN1W025 / CG/ Philips / Bajaj.

Taking down old unsv 2ft FTL fitting Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 20 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells Cat Part No-LHEXARP7IN1W020 / Philips/ CG/ Orpit

Taking down unserviceable building security light and Material and labour for LED Security Light fitting of 15 Watt comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 65 complete with all accessories and lamp colour white all as specified and directed. Make: CG or equivalent in Phillips/ Bajaj

GI Pipe Medium Grade 40 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers complete all as specified and directed.

Taking down old unsv geyser and Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. all as specified and directed. Make: Crompton/ Bajaj/ Racold

PVC connections 15mm size with PTMT nuts of length 300mm all as specified and directed.

Bib tap of size 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) all as specified and directed

Takingdown unserviceable Plug and socket and Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20A 240V SP MCB all as specified and directed. Make-Legrand/ ABB/ Havells

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 25 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the platee not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100 c/c , funnel ,watering pipe etc. all specified and directed including testing on completion.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire.

Cutting chases in stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth all as specified and directed

Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including making openeing brick/ stone Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified and directed. Make:Crompton Greaves/ Havells/ Bajaj

GI pipe light grade of size 40mm dia for cable protection in trenches/ floor, fixed on pole/wall etc all as specified and directed.

Cutting PCC/road 200mm width and 200mm depth for laying of cable and making good with PCC 1:3:6 type C1 all as specified and directed

Supply, testing and replacement of LT UG Cable, 1100 volts grade, XLPE insulated screened PVC bedded, Galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor of size 16 Sqmm x 4 Core laid in trenches / ducts, fixed on wall / inside panel, drawn through pipe including taking out old unserviceable LT cable complete all as specified and directed. Note: Excavation earth work sand cushioning cable cover and pipe for cable protection shall be measured and paid separately.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in soft /loose soil for laying for under ground cable all as specified and directed.

Returning filling in including spreading, levelling watering and well ramming in layer not exceeding 25 Cms all as specified and directed.

Material and labour for removal of excavated surplus soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Supply and spreading sand in trenches as cushioning to under ground cable on top and bottom of cable all as specified and directed.

Material and labour for brick sub class 'B' to be laid over dry sand cushioning in trenches as protection to cable all as specified and directed.

ZOOM ENTERPRISES

sree devi construction

P K ENTERPRISES

ACE PROMOTERS