Provn of car parking for 05 x car and Provn of ceiling Fans under Nagrota.

Amount

Surface excavation nexc 30cm and averaging 15cm deep in any type of soil complete all as specified and directed.

Excavating in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Sof t/ loose soil

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point

Returing filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick.

M & L PCC 1:4:8 type D-2 (Using 40 mm grade aggregate) in foundation, filling and mass concrete

M & L brick work with subclass ‘B’ bricks using old size straight on plan exc 6m mean radius built in cement mortar 1:6 as directed

M&L rendering 15 mm thick on external faces brick /concrete surfaces other than fair faces of wall in cement mortar 1:4 rendering is to be finished even and smooth (without using extra lime or cement all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer Complete all as specified and directed.

M&L for hard core of broken bricks n exe 63 mm, deposited, spread and levelled in layers n exe 15 CM thick, watered and rammed to a true surface complete

PCC 1:4:8 D-2 (using 40mm graded crushed stone aggregate) as a sub base to chequred tile ( 75mm thick ) finished even and rough.

Excavation for post holes (or in similar hole ) each n.exc 0.50 Cum including dismantling PCC including disposal of surplus n.exc 50m all as specifed and directed by Engineer -in- Charge.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates, or flat sections) including distance pieces, cleats etcFe 410 -W (GdeE- 250) qualityA complete all as specified.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer all as specified and directed.

PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in benching & copping complete all as specified.

Material and labour for Factory made mechine pressed precast concrete interlocking paver block any shape and size top layer with grey cement and pigment of thickness 80mm in different colour and pattern ,laid over 25mm thick dry sand and joint filled with dry sand complete all as specified and as directed by Engineer-in-Charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified and dircted.

S&F switch piano flush type 5 Amps single pole, one way, 230 volts AC circuit complete all as specified & directed.

S&F of ceiling rose surface type 65mm x 50mm 2 to 3 terminal complete all as specified & directed.

Supply and fixing Exhaust fan 250 mm sweep Metal body single phase AC 230/240V complete with louvers for wall mounting incl grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core 23/0.0076 size from ceiling rose to exhaust fan. Make : Havells/Crompton greaves / Crystal.

Cutting out holes in existing cement concrete/bricks walls built in cement mortar making opening suitable for Exhaust fan 250/300mm sweep plastic body with louvers, grouting steel bolts for fixing with screwed end of suitable size complete all as specified and directed including making good the disturbed surface to match with the existing surface and finishes complete all as specified and directed.

Supply and fixing ceiling fan 1200 mm sweep single phase AC 230/240V complete incl grouting of eyebolt of suitable size in ceiling and fixing the fan by mean of suitable sutable bolts, nuts, washers and provision of flexible copper conductor cable 3 core 23/0.0076 size from ceiling rose to fan complete. Make : Havells/Crompton greaves / Crystal.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.

Supply and fixing swing type wall mounting fan 450 mm sweep single phase AC 230/240V complete for wall mounting incl grouting, holding down bolts, nuts, and provision of flexible copper conductor cable 3 core 23/0.0076 size from ceiling rose to fan. Make:-Havells/Crompton greaves / Crystal.

Supply and install stationary water heater (Geyser) vertical storage type of 10 Ltr capacity electric driven closed vented 5 star marked suitable for operation for single phase 240 volts, inner container made out of stainless steel, 1500 watt, pressure rating 60 N/Sqmm, class-1, 5 star with all necessary fittings, cutting out holes in existing cement concrete/bricks walls built in cement mortar, supply, fixing, grouting new purpose make mild steel bolts with screwed end 8mm dia and 100mm long alongwith one washer and one Hexagonal nut at screwed end for fixing the geyser all as specified and directed including making good the disturbed surface to match with the existing surface and finishes complete. Make:-Havells/Crompton greaves / Crystal.

Nitika electricals and engineers works

Shri Karshni Builders

SUPER BUILDER

U K Engineering Works

M/S A K ENGINEERS & CO.

MAMTA ENTERPRISES

S R CONSTRUCTIONS

RAJINDRA ENGINEERS & CONTRACTORS

SHSS ASSOCIATES

JK BUILDERS AND DEVELOPERS

Bidder Name

Shri Karshni Builders

Nitika electricals and engineers works

MAMTA ENTERPRISES

U K Engineering Works

RAJINDRA ENGINEERS & CONTRACTORS

JK BUILDERS AND DEVELOPERS

SUPER BUILDER

S R CONSTRUCTIONS

M/S THAPPA TRADERS

SHSS ASSOCIATES

M/S A K ENGINEERS & CO.