MAINT REPAIR REPLACEMENT OF INTERNAL ELECTRIFICATION DBs SUB MAIN WIRING HANGER LIGHTING INCLUDING ELECTRIC AND CONTROL SYSTEM OF EM INSTALLATION AT VARIOUS HANGERS AT AFS KANPUR

Amount

Supply & fix in replacement Earth Leakage over load and short -circuit protection for double pole for 30 mA to 100mA (6 A to 63A) capacity and connected with suitable lugs in the electric circuit as directed and and specified. Make - Legrand/L&T/ABB

S&F in replacement Master LED Tube 1200mm 20 Watt complete all as specified. Philips Models MAS LEDtube 1200 mm 13W865 T8 I IN30 or Equivalanet in WIPRO/BAJAJ

S&F in replacement sheet metal enclosure , 20A single pole and neutral with a two pin and earth plug and socket complete in metal clad board with one single pole MCB 20 Amp fixed properly on in concealed position all as directed by Engineer-in-Charge. Make : Legrand/Indo Asian/ABB

S&F in replacement Metal clad socket 2pin & earth plug top 20A, 230V complete suitable for AC Box complete all as specified and directed by Engr - in- Charge

S&F in replacement Metal clad socket industrial 2pin & earth plug socket 20A, 230V suitable for AC Box complete all as specified and directed.

Taking down old unserviceable/deteriorated batten/MS conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash complete all as specified and directed by Engineer-in-Charge.

M & L for concealed point wiring on wall and surface wiring on ceiling/roof/trusses with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including 16 gauge stove enameled rigid steel conduit (metallic) not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.0 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators with brass screw and cup washers including PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge. For one light, fan, call bell point controlled by one switch.

All as per item No. 7 above but for 5Amp independent socket point controlled by one switch.

all as per iten No 7 above but for one socket point controlled by one switch on same board

All as per item No 7 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M & L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators with brass screw and cup washers including PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces complete. For one light, fan, call bell controlled by one switch. Make of wire- Polycab / Havells / Finolex.

All as per item No. 11 but 5Amp independent socket point controlled by one switch.

All as per item No.11 but For one socket point controlled by one switch on same board

All as per item No 11 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M &L for point wiring with necessary fixing arrangement with PVC-FRLS insulated and unsheated copper multi-stranded conductor of size 1.5 sqmm ,1100 volt grade drawn in existing surface/concealed conduit including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 sqmm with earth dolly and bakelite laminated sheet 3 mm thick ISI marked for fixing of switches /sockets fan regulators etc with MS screw and cup washers including PVC-FRLS insulated and unsheated copper multi -stranded conductor of size 1.5 sqmm ,1100 volts grade for continious earth complete all as specified and as directed for following :- For - one light ,fan,call bell point controlled by one switch

All as per item No. 15 above but 5Amp independent socket point controlled by one switch.

All as per item No 15 above but for power point wiring in existing concealed/surface conduit with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M & L for surface point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including casing caping/conduit (as per site requirement) 20 / 25 mm white / ivory with all accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC / Polycarbonate gang box of appropriate size for fixing of switches / sockets, fan regulators, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing all as specified and directed by Engineer-in-Charge for the following:for one light , fan, call bell. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG

All as per item No 18 here-in-before but for one socket point controlled by one switch on independent board.

All as per item No 18 here-in-before but for one socket point controlled by one switch on same board.

All as per item No 18 here-in-before but for power point wiring in existing concealed/surface conduit with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S&F in replacement switch flush type single pole one way 5 Amps, 240 volts, white finish ISI Marked complete all as specified . Make : CONA /Anchor/Havells

S&F in replacement switch flush type 15 Amps, 240 Volts single pole white finish complete ISI Marked all as specified. Make : CONA /Anchor/Havells

S&F in replacement socket outlet 5 pin, 5 Amps flush type white finish complete conforming/ ISI Marked all as specified .Make : CONA /Anchor/Havells

S&F in replacement socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.Make : CONA /Anchor/Havells

S&F in replacement electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified.Make : CONA /Anchor/Havells

S&F in replacement, ceiling rose, surface backlite, 65 x 20 mm three terminalcomplete and directed. Make : CONA /Anchor/Havells

S&F in replacement of switch Piano modular type, 6 Amp, one way complete all as specified. Make : Cona/Havells/Anchor

S&F in replacement of switch Piano modular type, 16 Amp, one way complete all as specified. Make : Cona/Havells/Anchor

S&F in replacement of mega bell push Piano modular type, 6 Amp with indicator complete all as specified. Make : Cona/Havells/Anchor

S&F in replacement of socket outlet modular type, 3 pin, 6 Amp, shuttered complete all as specified. Make : Cona/Havells/Anchor

S&F in replacement of socket outlet modular type, 3 pin, 6/16 Amp, shuttered complete all as specified. Make : Cona/Havells/Anchor

S&F modular angle lamp holder 240 V 6A, complete all as specified and directed.

S&F in replacement double door metallic sheet metal enclosure for DB when MCBs to be used TPNL, 4 ways, 415Volts (horizontal type) with 200 Amps rated bus bar suitable for TPN MCB/ 4 pole Isolator fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as directed. Make -legrand /L&T/ABB/ Indo Asian

S&F in replacement sheet metal enclosure TPN MCCB DB 8 Way , 415 volt (vertical type) with 250 A bus bar double door type IP 43 -IK 09 for DB when MCBs and MCCB upto 160Amp (as incomer) to be used fixed properly on/inconcealed position and to provide required sizes of flexible conduit at any open surface near DBs for cables/wires complete all as specified and directed. Make legrand /L&T/ABB/ Indo Asian

S&F in replacement sheet metal enclosure TPN MCCB DB 4 Way , 415 volt (vertical type) with bus bar double door type IP 43 -IK 09 for DB when MCBs and MCCB 160 Amp (as incomer) to be used fixed properly on/inconcealed position and to provide required sizes of flexible conduit at any open surface near DBs for cables/wires complete all as specified and directed. Make legrand /L&T/ABB/ Indo Asian

S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. Make - legrand /L&T/ABB/ Indo Asian

All as per item No 37 above but, SPN DB 4ways

All as per item No 37 above but, SPN DB 2ways

S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs.Make -legrand /L&T/ABB/ Indo Asian

All as per item No 40 above but, SP 40-63 Amps

All as per item No 40 above but, SPN 32 Amps

All as per item No 40 above but, SPN 40-63 Amps

All as per item No 40 above but, TP 40-63 A 415V

All as per item No 40 above but, TPN 40-63 Amps

S&F in replacement MCCB 125 Amps, 4 Pole, 415V, 25KA complete including taking down old unsv MCCB of any rating Make - Legrand/Indo Asina/L&T/ABB

S &F in replacement MCCB 160 Amps 4 pole 415 V 25 KA complete including taking down old unsv MCCB of any rating . Make Legrand/Indo Asian/ L&T/ABB

S&F in replacement sheet metal enclosure , 32A, 415 Volts triple pole neutral & earth with a three pin and earth plug and socket complete in metal clad board (Industrial type) with one TP MCB 32 Amp fixed properly on / in concealed position complete incl taking down old and unsv all as directed by Engineer-in-Charge.Make - Indoasian/ABB/L&T

S&F in replacement sheet metal enclosure , 63A, 415 Volts triple pole neutral & earth with a three pin and earth plug and socket complete in metal clad board (Industrial type) with one TPN MCB 63 Amp fixed properly on / in concealed position complete incl taking down old/unsv all as directed by Engineer-in-Charge. Make - Indoasian/ABB/L&T

M&L in replacement sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in MS/PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete incl taking down old sub main wiring Note : M S Conduit/ PVC casing caping and cutting cheaseling and making good will be measured and paid separately

All as per item No. 50 but two core 4 sqmm and one run of 4 sqmm copper cable complete.

All as per item No. 50 but two core 2.5 sqmm and one run of 2.5 sqmm copper cable complete.

Material and Labour in replacement for 3 core PVC insulated sheathed armoured stranded copper conductor cable of size 2.5 sqmm 1100 volt grade and PVC insulated 3 way

S&F in repalcement rigid metallic medium 20mm dia stove enameled steel conduit ISI marked in concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed position all as directed by Engineer-in-Charge.

All as per item No.54 above but metallic medium 25 mm dia stove enameled steel conduit ISI marked -do-

S&F in replacement rigid metallic medium 20mm dia PVC Casing/ caping ISI marked in concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed/Surface position all as directed by Engineer-in-Charge.

Cutting chases in brick walls, pinning in at the depth of 30 mm, making good to facings where required and pointing in cement mortar 1:3 cutting chases for concealed conduit wiring,submain wiring etc and making good and palstering the surface with cement or plaster of peris and matching with same colour scheme, cutting exceeding 10cm but not exceeding 30cm girth complete all as directed by Engineer-in-Charge. .

Supply and fixing in replacement Recess LED 600x600mm fitting made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI >80, PF >0.95, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, Maximum Wattages 37W, Minimum system Lumens 3400. Philips Models RC-380B LED 36S-6500G4L60W60 PSD or Equvilanet in WIPRO LM24-392-XXX-57-DD/BAJAJ BZRSQL 36LLEDGX

Supply and fixing in replacement for energy saver LED light fitting 20/21 watt, 230 Volts, single tube mounting including LED Tube/ LED blocks 20/21 Watt ,Lumen OUTPUT NOT LESS THEN 115 lM /WATT with 50000 burning Hours, PF = 0.95 with alumnium housing complete with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection three core copper cable from ceiling rose to led light fitting all as directed incl taking down of old unsv fitting . Make PHILIPS SLIMLINE EXTRA SHINE 22W OR EQUIVALENT IN WIPRO cat Part No LL20-221-XXX-65NE3 or Havells

Material and labour in replacement for energy saver LED Smart Batten fitting 10 watt, 230 Volts, alumnium housing ,Box type. etc and accessories, including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting old unserviceable bracket with sketch fitting all all as directed. Make : Philips Cat Part No : BN021LED 10S-6500 PSU GRS1 / Wipro Cat No LL20-111-XXX-65-NE / Havells Cat No : ENDURALINEARNEOBS10WLED865SPCWH

Material and labour in replacement for energy saver LED Full Glow fitting 40 watt , 230 Volts, Box type. etc and accessories, including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting old unserviceable bracket with sketch fitting all all as directed. Make :Philips Cat Part No RC380B LED36S-6500 G5 L3W12 PSU OD or equivalent in Wipro cat Part No CRCO13R036HP57GL1 or equivalent in Havells

Supply and fixing in replacement Industrial LED channel light fitting (4') 39 watts, 5700 K, suitable for surface mounted complete all as specified and directed. Cat No. LE10-491XXX-57HCSL, Make : Wipro or equivalent in Philips or Havells.

S&F in replacement LED 4 FT Batten 40 watt with a nominal system lumen output of 4000 lumens and a minimum syestem efficiency of 105 Lm/W, system lifetime of luminaries 40,000 burning Hours at L70, Colour temparature of 6500 K and CRI not less then 80 IP -20 Protection CRCA WITH a glossy diffuser power factor 0.95, total power comsumption should not exceed 38 watt (including driver) complete with hanging arrangements including taking down old unserviceable fitting complete all as specified and directed. Make:Havells Cat No STOUPLUS1200BS40WLED8405PCWH or equivalent model in Wipro/Philips as approved by GE.

Supply and fix in replacement energy saving LED 4ft Batten 20 Watt twin glow, LED up and down glow batten (Yellow uplight relax mode and white downlight work mode) aesthetic design, with polycarbonate housing, CCT 6500 K, 240V 50 Hz IP 20 ans PF 0.90 complete all as specified and directed. Make Philips Cat No. LB0620 12NC or equivalent in Havells/ Wipro

Supply and fixing in replacement of high pressure die cost aluminium (LM6) alloy housing SMD LED high bay luminaire of not less than 100 Lumens/ watt system lumen with and including mounting accessories specially desiged heat sinks dust free system wattage maximum 100 watt , PMMA material Penuts lenses for effective light distriubtion, co-related color temp upto 5700K, CRI 80 and above, maintenance of lumen @ L70 protection of fixture :- IP65, IK08, Class I, Line Frequancy 50/60 HZ, power factor 0.95 and above, Driver efficiency > 90%, Voltage rang 120-277 Volt AC, lumen standerd / test certificate as per IEC 60598 and IS 10322, fixture should have BIS certification, driver too has BIS certification as mandotary from Govt of India, complete incl taking down old unserviceable fitting all as specified and directed. Make: Havells Cat No. PARABELLOHBP 100WLED857 PBOTG or equivalent in Philips/ WIpro

S&F in replacement of high bay luminary LED 180 Watt, 240 Volts, system lumens 14000, complete with ELECTRONIC DRIVER including suitable size of reflector, hanging/ fixing arrangements & connecting with three core copper cable 2.5Sqmm including taking down old worn out high bay luminary complete all as directed by Engr-in-Charge Make : Philips Cat No. LEDWPHB-180 or equivalent in Havells/ Wipro as approved by GE.

M& L in replacement of high bay luminary LED 150 Watt, 240 Volts complete with ELECTRONIC DRIVER including suitable size of reflector, hanging/ fixing arrangements & connecting with three core copper cable 2.5Sqmm including taking down old worn out high bay luminary complete all as directed by Engr-in-Charge Make : Havells Cat No. SAUCER GENX HBT P 150W LHELAFU7PH7J150 or equivalent in Philips/ C&S

Supply and fix in replacement recessed type 35/40 watt LED with Lumen output of 3400 Lumen with epoxy polyster powder coated CRCA sheet complete with electronic driver etc prewired all accessories and connected with copper wire suitable size & length including hanging arrangements complete all as directed and as specified. Make: Philips Cat No. RCB 380B LED 36S-4000 G4 L60 W60 PSD OD WH OC or equivalent in Wipro/ Havells

M & L in replacement for LED Building Security Light 70 watt of alumenium PDC housing glass coverwith IP 66 protection complete all as specified and directed. Make: Havells 70W Endura Pearl Plus Outdoor / or equivalent in Philips/ Wipro

Supply and fixing in replacement for LED Spot light fitting , 230 Volts with suitable mountning and accessories,etc. including required fixing arrangements and electrical connection complete incl taking down old unsv fitting .Make :Philips Cat pt No 7 W Sky spot COB (CW) 6500K or equivalent in Wipro/Havells

S&F in replacement for LED Building Security Light 90 watt orf alumenium PDC housing glass cover with IP 66 protection all as specified and directed complete inlcuding taking down old/unserviceable fitting .Make Phiilips Cat No : BRP409 90 V2 or equivalent in Havells/ Crompton

M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification including taking down old unsv earthing complete. Note: Earth wire up to 7.5mt shall be deemed to be inclusive under quoted unit rate.

Extension to earth connection with 4 mm dia GI wire fixed on surface in wall or in recess or drawn in conduit for loop earthing all as directed by Engineer in Charge

S&F in replacement for LED Building Security Light 110 watt of aluminium PDC housing glass coverwith IP 66 protection complete all as specified and directed. Make Philips cat No BRP409 LED 110CW M2 FG 90W /WIPRO CAT PART NO LRO2-122-XXX-57-G2 or equivalent /Havells.

S&F in replacement extruded aluminium suspended diffused 4 feet light fitting 38 watt high efficiency suitable for Surface, wall and conduit mounting for energy saver LED light fitting, 230 Volts complete accessories, prewired including required fixing arrangements on false ceiling and electrical connection three core copper cable from ceiling rose to led light fitting complete all as specified and directed. Make : PHILIPS SP680x1 LED39S 6500 PSU WH L120 S1 or equivalent Wipro / Havells.

Supply and laying or fixing in replacement cable on cable tray or wall/surface/roof/ceiling of Hangers or passing through pipe, commissioning and testing 1100 volts grade XLPE insulated armoured heavy duty cable with aluminum conductor of cross sectional area 25 sqmm 3.5 core using stranded conductor complete incl taking down old unsv cable all as specified

All as per item No.76 above but size 16 sqmm 4 core

All as per item No.76 above but size 10 sqmm 2 core

M&L in replacement for service cable of PVC insulated unsheathed weather proof twin core aluminium solid conductor 6 sqmm complete all as specified and directed. Make Plaza/Havells/Polycab

All as per item ser No 79 above but cable size 10 sqmm.Make Plaza/Havells/Polycab

Supply and fix in replacement of bollard including light lamp having IP65/IK10 with base plate and making all necessary connection including fixing it in the ground with suitable clamping all as required and directed at site. Make: Philips cat Part BCP150 LED150/NW PSU 220-240V 7043 or equivalent in wipro/Havells.

M &L for replacement of change over switch 4 pole, 415 V 100 Amp including connecting material, nut bolts washer, lugs etc complete incl taking down old unsv change over switch all as directed Make L&T /Legrand/ABB

S & F in replacement bus bar trunking system compact air insulated 315 Amp 415 volts 3 phase 4 wire, Straight Feeder of 3 Mtr length with neutral as per IES/CEI-60439 IS -8623 (1 &2), 25 KA 1000V operating voltage galavanisedaluminium alloy (copper & tin plated) insulated insulators . F Class shaped ribbed sheet steel enclosure powder coated minimum IP-54, Single Bolt Joining System through monoblock, tap off provision min every meter, fire retardant , type tested & insulator with hot galvanised omega certified bus way system for AC Supply with following accessoried & complete as required all as directed by Engineer in Charge. Make : Legrand - Zucchini / Schneider / L& T / C&S as applicable .

S&F in replacement MCCB 415 Volts 32 Amps capacity , 25 KA, Ics=100% Icu, four pole with Sheet steel enclosure for suitable size of MCCB with locking arrangement consisting of necessary suitable arrangements for incoming & out going cables with cable glands and fixing arrangement on pole/wall ,PCC work including necessary flat iron clamps with nuts, bolts & washers and powder coated complete all as specified & directed.

Supply and Fix superior quality fine finishing reliable hot dip galvanized mild steel cable tray of size not less than width 300mm, height 150mm , 2 mm thick and fixed on angle iron support including suitable size of cable saddles for fixing of cable complete all as specified and as directed.

M/S Husna Electrical Works

Preetpowercontrol

santosh electronics

S B ENTERPRISES

M/s Sohanil Construction

PAWAN COOL CORPORATION