REPAIR, PAINTING AND REPLACEMENT OF VARIOUS PARTS OF STEEL AND WOODEN FURNITURE AND GI CHARPOY FOR OTM AND MD ACCN AT UMROI MIL STN UNDER GE UMROI

Amount

Charpoy GI with ply top includes following items (refer Drg NoFD-220), Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Removing of existing unserviceable ply wood from GI Charpoy, including threading, tihghtening of all components of GI Charpoy and supply & fixing 12mm thick plywood size 1980x900mm, BWR grade, conforming to the requirement of IS : 303-1989, commercial face both side including replacing 25 x 5mm mild steel flat iron stiffener where required duly bolted with long rails at equal spacing. MS flat shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer. 10 Nos flush headed bolts and nuts with washer shall be provided for fixing of plywood in the short rail /long rail with flat iron of suitable size as directed by Engineer-in-Charge. Edges of Plywood shall be smoothened all around and corners shall be rounded and smoothened as per direction of Engineer-in-Charge. One coat of water resistant adhesive/marine grade fevicol shall be given to edges all around after smoothened the edges.

Dismantling of existing unserviceable broken long rail of charpoy GI pipe and supply and fixing long rail made out of 32mm bore mild steel galvanised pipe medium grade ISI marked. The end of the pipe shall be threaded as required for fixing with the charpoy. (Note :- Old serviceable long rail shall be kept in safe custody for re-used as short rail and legs and unserviceable GI Pipe shall be contractors property against credit.)

Taking out old unserviceable short rail from the frame and making short rail from old long rail obtained from serial item No-8.02 above by cutting serviceable part to required length, threading both end and fixing complete all as directed. Note :- Old Unserviceable short rail shall be kept in safe custody for re-used as legs and unserviceale GI pipe shall be contrators property against credit

Taking out old unserviceable GI legs from the frame and making legs from old long and short rail obtained from serial item No-8.03 above by cutting serviceable part to required length, threading one end, another end shall be covered with block of hard wood and fixing complete all as directed. Note :- Unserviceable GI pipe shall be contrators property against credit

Supply and fixing galvanised iron 3 way elbow 32mm bore, ISI marked, medium grade length not less than 65mm in each way including dismantling of old elbow complete all as specified and directed.

Supply and fixing galvanised iron check nut, 5mm thick suitable for 32mm bore galvanised iron pipe including dismantling of old unserviceable check nut complete all as specified and directed.

Supply and fixing MNF clamp made out of flat iron 25mm x 3mm welded to GI pipe legs with end closed with 3mm thick MS plate welded to the clamp and 5mm thick MS plate welded properly at the bottom of leg including painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as sfecified and directed.

Almirah Large Steel with Shelves includes following items (refer Drg NoFD-67/1031),

M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV locks and S&F new locks 6 lever ISI Marked of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV 3 way locking device and S&F new 3 way locking device including MS rod of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV clamps and S&F new clamps of existing shape and size including adjustment of shelves where reqd all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV hinges and S&F new hinges of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV base/legs and S&F new base/legs of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV shelves and S&F new shelves made of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Almirah large steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Almirah Medium/Small Steel with Shelves includes following items (refer Drg NoFD-243/1032),

M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV locks and S&F new locks 6 lever harrison/Godrej make of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV 3 way locking device and S&F new 3 way locking device including MS rod of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV clamps and S&F new clamps of existing shape and size including adjustment of shelves where reqd all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV hinges and S&F new hinges of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV base/legs and S&F new base/legs of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV shelves and S&F new shelves made of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Almirah Med steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Locker Steel includes following items (refer Drg NoFD-257/1029),

M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing existing UNSV hasp and stapple S&F new CP hasp and stapple of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV hinges and S&F new hinges of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV base/legs and S&F new base/legs of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV shelves and S&F new shelves made of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV conduit pipe S&F new conduit pipe of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Locker steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Bed Hard Iron Frame includes following items (refer Drg No- FD/E6/MAP/08(R)), Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Removing of existing unserviceable ply wood from Charpoy hard top iron frame and supply and fixing 12mm thick plywood of existing size, BWR grade, conforming to the requirement of IS : 303-1989, commercial face both side duly fixed with stiffners all as specified and shown on drawing or as directed by Engineer-in-Charge.

M & L for removing existing UNSV bolt and S&F new bolt of exisiing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M & L for removing existing UNSV rubber shoe and S&F new rubber shoe of exisiing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV paints by scrubbing with sand/emery paper, welding work where as required and repaint the Bed hardtop Iron frame steel applying two coats of synthetic enamel black paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Repair of Bed Ply Wood Top includes following items (refer Drg No. FD-246): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of new long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix new plywood 4mm thick one side teak face other side commercial ISI mark BWR grade including covered with 12mm thick half cut beading both side of head board of Bed hard including removing of existing unserviceable ply wood from existing head board of Bed hard all as specified and shown on drg or as directed by Engr-in-Charge..

Supply & Fix new plywood 4mm thick one side teak face other side commercial ISI mark BWR grade including with 12mm thick half cut covered with beading both side of foot board of Bed hard including removing of existing unserviceable ply wood from existing foot board of Bed hard all as specified and shown on drg or as directed by Engr-in-Charge..

Supply & Fix new plywood top 12mm thick commercial BWR grade ISI marked confirming to IS-303 including removing of existing unserviceable plywood top all as specified and shown on drg or as directed by Engr-in-Charge..

Supply & Fix of new bottom rail made out of 2nd Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable bottom rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new legs of head board made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable legs of head board all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new legs of foot board made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable legs of foot board all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new corner cleats made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable corner cleats and all as specified & shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing new and old surfaces of bed ply wood top as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Bin soiled lilen includes following items (refer Drg No. FD-212/FD-244): Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of top made of 6mm thick plywood with teak veneer fixed in position of Bin soiled linen including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing of old existing unserviceable ply wood from front side of Bin soiled linen complete and replacing the same with new 6 mm thick ply wood with teak veeneer fixed in the same position of Bin soiled linen complete all as specified and shown on drawing or as directed by Engr in Charge.

Material & Labour for removing of old existing unserviceable ply wood from back side of Bin soiled linen complete and replacing the same with new 6 mm thick ply wood with teak veeneer fixed in the same position of Bin soiled linen complete all as specified and shown on drawing or as directed by Engr in Charge.

Removing of existing unserviceable cane both side from Bin soiled linen and reweaving the same with new cane plastic 2mm half round in godrej pattern and providing 4mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing new and old surfaces of Bin Soiled Linen as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Table Bed side (MAP) includes following items (refer Drg. No. FD-E6/MAP/15®): Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix top made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing UNSV Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of chromium plated handle if existing shape and size complete all as specified & shown on drg or as directed by Engr-in-Charge..

Supply & Fix new drawer made of commercial plywood 12mm thick BWR grade and front side pannel shall be made out of Pre-laminated Particle board 18/19 mm thick one side teak face exterior grade & bottomg side shall be applied of existing size of commercial plywood 6mm thick and also removing of existing unserviceable drawer complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of rubber shoe of existing shape and size complete all as specified & shown on drg or as directed by Engr-in-Charge..

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of Table bed side (MAP) as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Chair writing includes following items (Refer Drg No. FD/E6/MAP/12): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

M&L for removing existing UNSV seat and back with foam cushion incl tapestry cloth and S&F the same of chair writing steel all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV set of arm rest and S&F new arm rest set of chair writing steel all as specified and shown on drawing or as directed by Engr-in-charge ..

Material & Labour for removing paints by cutting/scrubbing from chair writing steel and contineous gas welding to the broken parts where reqd after preparing the entire frame repaint the chair with two coats of synthetic enamel paint white all as specified and shown on drawing or as directed by Engr-in-charge .

Repair of Locker Wooden includes following items (refer Drg No.FD 54(M)), Work will be carried out at verious places in station, if required or as directed by Engineer in charge:-

Supply & fix top made of block board 18/19mm BWR grade fixed in position of locker including removing of existing unserviceable top complete all as specified and shown on drg or as directed by Engr in Charge.

Supply & fix side made of block board 18/19mm BWR grade fixed in position of locker including removing of existing unserviceable side complete all as specified and shown on drg or as directed by Engr in Charge.

Material and labour for removing of existing unserviceable ply wood from back side of locker wooden and replacing the same with new 6 mm thick commercial ply wood BWR grade fixed in the same position of wooden locker complete all as specified and shown on drawing or as directed by Engr in Charge.

Supply & Fix new door shutter (Single leaf ) made of block board 18/19mm BWR grade fixed in position of locker including removing of existing unserviceable door shutter complete all as specified and shown on drg or as directed by Engr in Charge.

Material and labour for Removing of existing unserviceable legs of locker wooden and replacing the same with new legs in existing position of size 50x30mm at top and 40x40mm at bottom made by 1st class hard wood well seasoned complete all as specified and shown on drg or.as directed by Engr in Charge.

Material and labour for Removing of existing unserviceable stainless steel courtain rod 20mm dia with bracket of locker wooden and replacing the same with new stainless steel courtain rod 20mm dia in existing position complete all as specified and shown on drg or.as directed by Engr in Charge.

Material and labour for Removing of existing unserviceable shelves of wooden locker and replacing the same with new shelves as per existing size and shape complete all as specified and shown on drg or.as directed by Engr in Charge.

Supply & Fix new aluminium alloy handles fixed in the position of size 100mm including removing of existing unserviceable aluminium alloy handle complete all as specified and shown on drg or.as directed by Engr in Charge

Supply & Fix new aluminium alloy hasp and staple 100mm including removing of existing unserviceable hasp and staples complete all as specified and shown on drg or.as directed by Engr in Charge

Material and labour for preparation of old painted surface of locker wooden and applying two coat of synthetic enamel paint (approved shade/colour) to all external and internal surface of locker wooden complete.all as specified and shown on drg or.as directed by Engr in Charge

Schedule of Credit

M/S MANOJ KUMAR BAL (BID ID -3176306)