B V 1 2025 26 QM SRE 2

Earth work in exvation by mechnical means (Hydrulic excavater)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottams, lift upto 1.5 m , including getting out the excavated soil and disposel of surplus excavated soil as directed within a leasd of 50m. all kind of soil.

Providing and laying in poisition cement concrete of specified grade excluding the cost of centring and shuttring . All works up to the plinth level 1:5:10 ( 1 cement :5 fine sand derived from natural sources:10 graded stone aggregrate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundation and plint in : Cement mortar 1:6 (1 cement: 6

Brick work with common burnt clay F.P.S.(non modular)bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1.6 (1 cement :6 coarse sand)

12 mm Cement plaster of mix.1.6 (1 cement : 6 fine sand)

62 mm thick cement concrete flooring with concrete hardener topping layer 50 mm thick cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)and top layer 12 mm thick cement hardener consisting of mix:1:2(1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size)by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. 40 mm thick with 20 mm nominal size stone aggregate.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc, including cutting ,hoisting fixing in position and applying a priming coat of approved steel.Hot finished welded type tubes.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal /vertical or curved surfaces) excluding the cost of purlins, rafters and trusses. 0.63 mm thick with zinc coating not less than 275 gm/m2

35 mm thick factory made solid panel PVC ;Door shutter, made fo single piece extruded solid PVC profiles, 5 mm (+0.2 mm )tick, having styles & rails (except lock rail) of size 95 mmx5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side),having one side thickness of 15 mm integrally extracted on the hinge side of the profile for better side), having one side thickness of 15 mm integrally extracted on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x20mmx1mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement , self driven self tapping screws & MS rectangular pipes bracket of size 190 mm x100 mm of cross section size 35 mm Non decorative finish (matt finish)

Providing and placing on terrace (at all floor levels)polyethylene water storage tan , IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank