Providing electrification with new fixtures to renovated residential building for PC-6 at SVP colony, Jogfalls

Providing electrification with new fixtures to renovated residential building at SVP colony, Jogfalls

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. Ceiling rose, necessar...

Supplying exhaust fan of 1440 RPM of 300mm size with bracket blades complete for light duty suitable to operate on 230V 50 Hz AC supply.

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

Supplying, fixing and wiring Earth Leakage miniature circuit breaker 240V up to 300mA sensitivity on existing wood/panel board. 32-40 Amps 2 pole

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying heavy gauge PVC conduit pipe …….dia .mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC cei...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...

2.5 sqmm copper wire

4 sqmm copper wire

6 sqmm copper wire

Supplying and fixing of modular switch & connected

accessories on existing modular switch plate as per IS 3854 and IS 1293.

6 Amps one way switch

6 Amps 3way socket

6 Amps Bell push

TV/Telephone socket

stepped fan regulator Two Module

6 Amps Two way switch

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing superior quality modular switch

mounting polycarbonate plate with necessary supporting

back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box

long point above 6Mtr upto 10Mtr from tapping point to out let via switch box

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.

6A Batten Holder

6 Amps Bakelite ceilong rose

16 Amps Three way 5 pin socket

32A Bakelite DP

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.

Supplying and fixing of 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.

Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws

Supplying, stringing and wiring PVC insulated and PVC sheathed 650/1100 "V" class aluminum conductor to 8mm dia mesenger wire with two break insulator at either end and each insulated conductor suppor...

1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 -PVC Wire - 10 SqmmWeight per 100 Mtr Coil: 5.3 Kg

Guy Wire & GI Wire as per IS-2141

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (25m=3.275KG),(3.275KG=0.003275MT).

Supplying&FixingChemicalearthlingforgrounding.Conduits,ICcut-outs&otherequipmentsbackfillcompoundwhichisnon-corrosive,thermallyconductive,potentialtopermissiblelimits,superiorFaultconductioncapacity,n...

Supplying of .feet -PVC Batten with integrated LED tube .

W with high quality diffuser with Life of 25000 burning

hours & 70% lumen maintenance with CRI 80. Power

Input: 220-240V@ 50/60Hz & Power fac...

Supplying & fixing of retrofit type - LED bulb 9W with

OPAL acrylic diffuser comprising of LED source with CCT

6500 degree K, CRI 70%. efficacy 80 lumen per watt,

life 25000 burning hours and Complian...

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

Supplying and fixing regular MCB distribution boards on

wall/wood board / flush mounting using required clA, bolts,

nuts etc., with provision for fixing suitable type capacity

MCB's single phase/3 pha...

Supply and fixing polished wood board made of not less than 15 mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.- 15" x...

Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers.- 32 A