Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹28.0 L+₹62,970 (2.30%)Rejected-Finance 149 KHAJURI HARIDWAR UTTARAKHAND 247668 | HARIDWAR | UTTARAKHAND | 247668 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹29.4 L+₹2.0 L (7.39%)Rejected-Finance C 11 100 SAIPRASAD CHSL MALWANI MHADA MALAD W MUMBAI 95 | MUMBAI SUBURBAN | MAHARASHTRA | 400095 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹31.3 L+₹4.0 L (14.5%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹32.0 L+₹4.6 L (16.9%)Rejected-Finance HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹58,000
Closing Date
10 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER DAMAN
Garrison Engineer Daman, Tat RakshakVihar, Dalwada, Nani Daman Post, Daman (UT) PIN396210
REPAIR TO FENCING GATE, DRAIN AND HARDSTANDING AND OTHER B/R ALLIED WORKS AT ICGAS DAMAN, REPAIR /RESURFACING OF ROADS, ROAD FURNITURE AND ROAD SIGN BOARDS ETC AT ICGAS DAMAN.
2024_MES_636202_4
8750/E8
Open Tender
Civil Works
Works
270 days
DAMAN
Please refer Tender documents.
9 documents required · 9 mandatory
₹50
GARRISON ENGINEER DAMAN
₹58,000
3 Sept 2024
12 Jun 2024
12 Jul 2024
12 Jun 2024
10 Jul 2024
26 Jun 2024
Amount
Dismantling posts or struts (wood, steel or R.C.C.) any section,post embedded in concrete,brick work masonry etc complete all as specified and as directed.
Dismantling old unservicable chain link fencing of any type, complete including flat iron and nut bolts and M S round bars etc complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil etc complete all as specified and directed.
M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.
S&F mild steel grade FE-290 Gde E-165 Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire meshetc.) including all necessary drilling, bolting or riveting, et complete all as specified and as directed.
Supply only mild steel galvanized chain link fencing PVC coated any size any type etc complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed
M&L for Mild steel round bars10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165)complete all as specified and directed.
S&F 11 to 15 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt n exc 5 cm long complete all as directed.
M&L for refixing serviceable flat iron retrieved from old fencing by cutting into shape,drilling holes,notching for wire with required number of holes etc complete all as specified and directed.
M&L for refixing serviceable10mm dia MS round bar retrieved from old fencing by cutting into shape,bending and fixing to chainlink fencing etc complete all as specified and directed.
M&L for cement concrete 1:4:8 Type D-2 (40 mm graded aggregate ) 75 mm thick as in sub base etc including demoiltion of plain cement concrete complete all as specified and directed.
M&L 75 mm thick Plain Cement concrete type C-1 1:3:6 (40mm graded aggregate) as in plinth protection etc including demoiltion of plain cement concrete complete all as specified and directed.
M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' all as specified and as directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 including placing/fixing PVC (SWR) pipes of any dia as weep holes etc including demolition of old stone/brick masonry complete all as directed by Engr-in-charge. (Note:- PVC (SWR) pipe shall be measured under and paid seperately under relevant item.)
Supply only PVC (SWR) pipes, single socketed, in any length , with rubber rings 110mm dia in any length with rubber ring joints, laid/placed/fixed as in weep holes etc complete all as directed.
M&L for Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 40mm (Granite or Trap stone).
M&L for flush pointing to to random rubble masonry, uncoursed or brought upto courses in cement mortar 1:4 all as specified and as directed.
M&L for cement concrete as in road kerbs or copings and the like of Type B1, 1:2:4 (using 20mm graded stone aggregate) round or chamfered on edge including necessary use and waste of formwork including demoiltion of plain cement concrete .
M&L for Framed work such as grills, gratings, etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Gde E-165 including dismantling old structural steel etc complete all as specified and directed.
Supplying & fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of ancolour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws including dismantling of corrugated sheet complete as specified and directed.
S&F 1.25 mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) dismantling of plain sheet etc complete all as specified and directed.
M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer etc complete all as specified.
M&L for preparation of new steel surfaces by applying two coats synthetic enamel paint over a coat of red oxide primer n.exc 10cm in width or girth etc complete all as specified.
M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in subbase 100 mm thick finished to receive floor finish etc including demoiltion of plain cement concrete complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as 100 mm thick finished to receive floor finish etc including demoiltion of plain cement concrete complete all as specified and directed.
Taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water and removal of debries out side from MD land etc complete all as specified and directed.
M&L for burnt brick using old sized sub class 'B' bricks straight or curved on plan exceeding 6m mean radius and built in CM 1:4 etc including demolition of old stone/brick masonry complete all as specified and as directed.
M&L for rendering in CM 1:4, 15 mm thick on brick/concrete surfaces and finishing the surface even and fair.
M&L for newly plastered wall surfaces including chajjahs, parapets and applying two coat of weather proof Acrylic Exterior Emulsion over a coat of primer including making good surfaces complete all as specified and directed.
M&L for precast reinforced cement concrete PCC 1:2:4 type B-1 (20 mm graded aggregate) as in manhole/drain cover slabs etc set in CM 1:4 including use and waste of formwork and finishing top surface of cover slab even and smooth using extra cement etc including demoiltion of reinforced cement concrete complete all as specified and directed. (Note : Steel reinforcement and formwork shall be measured and paid separately)
M&L RCC Nominal mix Type B1 1:2:4 (20 mm graded aggregate) as in chajjas including demoiltion of reinforced cement concrete complete all as specified and directed.
M&L Formwork Rough finished surfaces of flat concrete to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and directed.
M&L Mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified as directed.
M&L chequered cement concrete tiles of size 20cmx20cm x25mm thick , set and jointed in neat cement slurry and pointed with grey cement and no pigments to match in and incl 15 mm thick cement mortar screed bed in CM 1:6 including dismantling of old tiles complete all as specified and directed.
M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including 50mm thick Sand filling under floors or in foundations including watering and consolidation including demoltion of old interlocking paver block complete all as directed.
Supply only integral waterproofing compound
Greasing /Oiling of rolling shutter/collapsible doors and replacement of unserceable part like ball bearing springs, ,safety locks, hood cover, & side U channel etc complete all as specified as directed.
S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
S & F in repair for providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, spring core wire (2.5 mm thick)of high tensile strength of165kg/sq. mm with tape (0.52mm thick) and weight 43.478 gm/metre and fixing the same with existing Y-shape angle iron placed 2m apart and with 6 horizontal R.B.T
M&L for Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, filling in screened & graded road metal, watering and well ramming(including supply of road aggregate, chippings material) etc rolling and making good to receive bituminous macadam /semi dense asphaltic concrete etc complete all as specified and directed by Engr-in-Charge.
M&L for scarifying or picking gravelled, macadam or bituminous macadam srufaces in area not exc 400 sqm, exc 50mm and not exc 100mm deep etc complete all as specified and directed by Engr - in- Charge.
M&L for 75mm thick granite trap or basalt (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread rolled with 8 to 12 ton power road roller and consolidated to gradient and camber required, complete all as specified & directed.
All as per serial item No 45.00 here in before but except stone (basalt or granite trap etc. ( serviceable material shall be used as obtained from item No 44.00 here in before).
M&L for preparation of surfaces of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc. sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engr-in-Charge.
M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, complete all as specified and directed by Engr - in- Charge.
M&L for applying evenly a tack coat with paving bitumen of VG-30 grade @ 10.00 Kg per 10 Sqm with the help of pressure sprayer over unsurfaced WBM etc complete all as specified and directed by Engr - In- Charge.
M&L for premix bituminous macadam with 4% binder content (paving bitumen of grade VG 30) by weight of total mix prepared in hot mix plant, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller/tandem vibrating roller etc complete all as specified and directed by Engr-in-Charge.
M&L for applying evenly a tack coat with paving bitumen of 60/70/VG-30 at 5.00 Kg per 10 Sqm with the help of pressure sprayer over existing black top surface etc complete all as specified and directed by Engr - in- Charge.
M&L for Bituminous premixed semi dense asphaltic concrete 40 mm consolidated thickness with 6% binder content (paving bitumen of VG-30 grade) by weight of total mix prepared in hot mix plant, laying of mix with self propelled machenical paver, the surfaces rolled and compacted to required camber and gradient with 8 to 12 tonne power roller/tandem Vibratory Roller etc complete all as specified and directed by Engr - in- Charge. Note:- The contractor coated rates shall also be deemed to include the following elements :- (i) The contractor shall get the mix design done through Govt. Approved Lab and the same shall be got approved from the GE berore providing SDAC. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs. 36/Kg.
M & L Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour(golden,yellow and white) using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
S&F of solar Road Stud with Lens colour "Red" of makes Loto solar road stud ALC-SSTD1 of aluminium alloy with PC of size 132x122x22mm, Oscar - OS-809 (125x125x25mm), or equivalent duly fixed with cement hardner , complete all as specified and directed .
S&F in Road safety Circular Convex Mirror of dia 1000mm incl stand and all necessary fittings Make - OS - 791 or equivalent including dismantling of existing convex mirror , complete all as specified and directed
S& F information Sign board (both Side written) of size size 4' x 3' (1200 mm x 900 mm) made of 3mm thick ACP sheet framed with 25mm dia stainless steel pipe horizonal in top and bottom adjoining with vertical post and having front side entire surface fully bonded with non reflective sheeting grade having pressure sensetive adhesive. The matter should not be printed on non reflective tape duly laminated so that printing should not fade and two Nos vertical post of 50mm dia stainless steel pipe 3Mtr long with ornamental top quoted as per sample including writting the matterial/words digitally on both side as required and as directed including excavation in post holes and embedded in PCC (1:3:6), type C-2 (using 40mm graded coarse stone aggregates) of size 300mm x 300 mm x 600mm deep and/including removal of surplus soil out side of MoD land complete, all as specified and as directed .Note:- The sample of sign board shall be provided by EIC & The contractor shall quote their rate accordingly.
M/s Himanshu Tyagi
PICON ENTERPRISES
RAJESH ENTERPRISE
Harsh Infrastructure
V D JADEJA
AKANKSHA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .