WBPHED/EE/BMD/NIeT- 7 OF 2024-2025/9

Amount

PART-A

Supply, delivery of clear water Open well Submersible Pump, with Bronze Impeller (Heavy Duty Pump). potable clear cold water and BEE 3 Star Rated motor and suitable for operation in AC Three phases 415V,50Hz (category B motor) Suction and Delivery size 80/65mm N.B- H-Q curve has to be submitted during the delivery (1W+1S)

a) Discharge-45m3/Hr Total head -65Mtr

Supply and delivery CIDF single door swing check Non Return valve(P.N-1.0) generally conforming to IS 5312 Part I for 80mm delivery line and as per technical Specification given in NIT

ii) 80 mm dia for H/L Pumping machinery

CIDF non-rising Sluice Valve (P.N-1.0) generally conforming to IS 14846 as per technical Specification given in NIT

i) 150 mm dia for Common delivery header

Supply and delivery of three phase actuator operated wafer type butterfly valve (PN-1.0) as per Bs-5155 and as per technical Specification given in NIT For H/L Side

Supply & delivery of M.S. suspension clamp suitable for above 80 mm dia column pipe with necessary nuts, bolts & washer etc suitable tor 80mm dia pipe (Size-300 mm x 75 mm x 10 mm each)

Supply, delivery & storage at site M,S Pipes for individual pump delivery line from pump discharge upto common delivery header, M.S flanges, bends, specials, etc. as required to make the installation of delivery and common delivery header of pumping machineries complete in all respects up to the satisfaction of E.I.C.and as per technical Specifications given in NIT

Supply delivery and storage at site of Electromagnetic Flow Meter with remote indicator cum totalizer unit and cable between the meter and indicator as per technical specification i) DN 150mm for CWR site

Supply, delivery & storage of Gleeserine type pressure gauge, cast Al. dial along with DN-15 GI impulse line with valve.

i) (0 – 7 Kg.) 102 mm dia for individiual delivery header

ii) (0 – 7 Kg.) 150 mm Ф for Common Header

Supply and delivery of folling cables

70 Sqmm 3.5 Core, 1100V grade XLPE insulated aluminium Armored cable ,cable As Per IS-7098 (Part 1) 2011 with Up To Date Amendments

1.5 sq mm , 12 core , 1.1 KV Grade PVC insulated Copper Armoured control cable as per relevent IS. a) For H/L 2nos actuater x 30 mtr= 60 mtr

10 sqmm 3core, 1100 Volt grade copper water proof PVC insulated submersible flat submersible cable,Conforming To IS : 694 As Amended Up To Date. For H/L Pump 2nos motor x 40mtr =80mtr

N.B- All cables should be purchased as per site condition

Supplying delivery of 200 Amps 415 Volt TPN Sheet steel enclosed HBC Fuse type Heavy Duty Double Break Main Switche with Sidet handle operated For receiving WBSEDCL power

Supply, Delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor Floor Mounted 415 Volt PDB cum MCC Panel having required Feeders as per technical specification

Supply delivery and storage at site of Ultrasonic type continuous level measuring unit with provision of 4 to 20 mA analogue signal, indicator and recorder for continuous level monitoring as well as 5 nos. relay out put for sensing high, low, low - low level in suction sump as per technical Specifications given in NIT

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). a) 40 mm dia [ for Sub mersible Cable protection]

PART-B

Installation of all items mentioned as in PART A including supply of all erection items, as required for installation of Puming machineris, MCC Panel, Cable joint box necessery cable laying finishing, Socketing supply of cable gland, etc.and other matrerials i.e-Gasket, nut & bolt, washer) by engaging skilled technician all complete as per relevent IE Rules with the entire satisfaction of EIC and as per detail technical specification.

Earthing with 65 mm dia GI pipe 3.64 mm thick x 3.04 Mts.incl GI bolts, double nuts, double washers . GI pipe protection (3 Mts. long) to be filled with bitumen partly under the ground level and size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside)and CI hinged inspection cover of 36.56 cm x 35.56 cm with locking arrangement, and connecting the equipments body to earth busbar including S&F 50 mm x 6 mm galvanised strip By ISI-Medium GI pipe For PDB cum MCC panel

Supply and delivery of 4(four) nos Colored cast Plastic Chair & 1(one) nos rectangular foldable potable table as per technical specication given in NIT

Internal luminaries arrangement at the Pump House and bathroom including internal wiring etc. as per technical Specifications given in NIT

Supply delivery and installation at site and storage of safety equipment like 6kg capacity Fire Extinguisher , sand bucket with bracket , rubber mats, shock treatment chart and first aid box, complete as per technical Specifications given in NIT

PART-C [ High Must ]

Supply and delivery and storage of the following at site

8mtr octagonal sections pole suitable for 50m/sec wind speed with raising lowering system comprising ,head frame ,luminaries carriage suitable to install 6 nos luminaries in symmetrical arrangement, double drum winch , 6mm dia SS wire rope trailing cable ,connector , integral power tool motor, manual handle, junction box, lightening arrester and foundation bolts manufactured from special steel along with nuts, Aviation light washer,anchor plate and common template.

Flood lighting luminaire with single die ceramic base high power LED, PDC housing & integrated flood optics to ensure uniform distribution maintenance free system, ideal for sports lighting, area lighting and high mast lighting.- M.No-BVP483 LED210 CW AWB PSU GR for Philips make or equivalent make

Surge protection device suitable for both 1+2 type protection 3 phase system 440V max operating voltage and max current 40KA along with sheet steel enclosure make- as per approved unified vendor list vide official website of WBPHED

32 Amps 415 Volt TPN re-wireable fuse type side handle operated and fixing Sheet steel Main Switch

10sqmm 4 core 1100V grade XLPE insulated aluminium Armored cable ,cable As Per IS-7098 (Part 1) 2011 with Up To Date Amendments,

Laying of above cable through the under ground trench having depth 760mmX width 460mm and laying 8 nos brick for per mtr length of the cable for protection of the cable including sand filling ramming complete as per IE rules as per direction of the EIC.

Construction of shallow foundation with M20 grade concrete for the high mast considering the safe soil bearing capacity at site as 10T/sq mt at 2 mtr depth with all materials and labour as per direction of EIC.

Erection and commissioning of the above pole with the help of suitable tools and plants wiring of luminaries with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor of 1.5 sq mm lugs, MCB and all labour as per direction of EIC

Provision of GI pipe earthing for high mast with 3 mtr long 50 mm dia GI pipe including connection to high mast earth terminal with 25 x 6 mm GI flats with all materials and labour as per direction of EIC and as per technical Specification

Add: 18% GST

Add: 1% Cess

S. P. CONSTRUCTION (BID ID -5700418)

PROGRESSIVE ENGINEERS CO OPERATIVE SOCIETY LIMITED (BID ID -5700990)