Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹42.8 L+₹1.1 L (2.60%)Rejected-Finance NEAR RANGE OFFICE CHOUBYANA TALBEHAT DISTT LALITPUR UP | TALBEHAT | LALITPUR | UP | L2 | Rejected-Finance Not become lowest bidder | |
| 3 | L3₹45.0 L+₹3.3 L (7.87%)Rejected-Finance WARD NO 4 NEAR MASZID BHATTAGAON DISTT JHANSI 284001 UTTAR PRADESH | JHANSI | UTTAR PRADESH | 284001 | L3 | Rejected-Finance Not become lowest bidder | |
| 4 | L4₹45.1 L+₹3.4 L (8.19%)Rejected-Finance 282 SADAR BAZAR JHANSI 284001 | JHANSI | JHANSI | UTTAR PRADESH | 284001 | L4 | Rejected-Finance Not become lowest bidder | |
| 5 | L5₹46.3 L+₹4.6 L (11.1%)Rejected-Finance 792 2 A CIVIL LINES NEAR BABULAL MILL GWALIOR ROAD JHANSI 284001 | JHANSI | JHANSI | UTTAR PRADESH | 284001 | L5 | Rejected-Finance Not become lowest bidder |
Tender Value
₹48.4 L
EMD Value
₹96,800
Closing Date
5 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Deepak Kumar
Garrison Engineer Jhansi
SPECIAL REPAIR TO BLDG NO T-2 AND T-3 RA NORTH (SINGLE JCO ACCN) OF 631 EME BN AT JHANSI CANTT UNDER GE JHANSI
2022_MES_530197_1
GE/JHA/TOK/17 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE Jhansi
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE Jhansi
₹96,800
Yes
27 Aug 2022
10 Jun 2022
7 Jul 2022
10 Jun 2022
5 Jul 2022
21 Jun 2022
Amount
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling of Framed timber scantling 40sq cm and over in section in any position complete all as specified and directed.
Dismantling of Framed timber fillet, rails, post, rafters, purlin etc n. exc 40sq cm in section in any position complete all as specified and directed.
S & F 0.50 mm thick pre- painted galvatume aluminum zinc-150 AZ coating GI based corrugated steel sheet of grey colour having tensile strength of 550 Mpa as in roof covering/cladding to roof, fixed with self tapping screws as specified complete all as specified and directed.
S & F 0.50 mm thick pre-painted galvalume aluminum zinc-150 AZ coating GI based plain steel sheet grey colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws as specified complete all as specified and directed.
M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rocks/debris to a distance not exc 50 mts and depositing where directed at a level n exc. 1.5 m above the starting point.
M & L for 25 mm thick plain cement concrete 1:2:4. type B-1 (20mm graded aggregate) as in floor topping including finishing top even & fair without using extra cement.
M & L for non - skid ceramic tiles, (first quality of approved class, colour and design/shade) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq m but not exceeding 0.11 Sq m, as in floor surface etc. over 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed.
M & L for Jointless non - skid ceramic tiles, (first quality of approved class, colour and design/shade) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sq m but not exceeding 0.38 Sq m, as in floor surface etc. over 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes , set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed.
M & L for glazed coloured ceramic tiles in vertical surfaces 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match ,over rendering 10 mm thick in CM 1:4 on wall complete all as specified and directed.
M & L for machine cut kota stone slab flooring 20-25 mm thick over over 15 mm thick screed bed or bedding layer of cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M & L for 75 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base.
M & L for 60mm thick factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, duly ISI marked over 50 mm thick sand cushion, with complete all as specified and directed.
M & L for filleting of section exc 25 sq cm but not exc 50 sq cm, in any position and to any shape in cement mortar 1:4 including excavation and earth work and all mitres, stops, etc.
M & L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate) as in plinth protection finished even and fair without using extra cement and making 50 mm deep joints at every 3 metre interval and at every corner and filling the joints with bitumen of grade 85/25 and sand mixture 1:3 complete all as specified and directed.
Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed.
M & L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surface including finishing plaster surface even and fair without using extra cement complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:6 fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified and directed.
Demolition of brick work or stone boulder masonry built in cement mortar or lime mortar including all quoins arches ,pillars etc complete all as specified and directed.
M & L for old size brick work with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.
Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika
M & L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer over 2 mm thick of Birla/JK White wall care putty to get level and smooth surface, on plastered surfaces, preparatory to distempering primer complete all as specified and directed.
M & L for preparation of new plastered surface of walls and applying two coats of exterior emulsion paint over a coat of primer all as per manufacturer's instructions complete all as specified and directed.
M & L for PCC 1:2:4, type B1 as in roof kerbs or mud stops, rounded or chamfered on edges using 20 mm graded aggregate complete all as specified and directed.
M & L for cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in copings complete all as specified & directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 sqm each complete all as directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but n exc 4 sqm each complete all as directed.
S&F Solid PVC door frame of size 50mmx47 mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified in SSR Part-II 2010 section 8.
S&F mild steel frame work as in door or gate of angle or other section with gusset plates, rails, braces etc complete drill for fixing of steel sheeting or other covering door etc conferming to Fe-410 W Gde-E-250 quality A complete all as specified and as directed.
M & L for mild steel angles, bars, flats etc, as in supports for hold fasts, pipe clamps, plain angle cleats for securing purlins, door frame, stay clamps incl nut & bolts (as required) and similar small articles confirming to Fe-290 Gde E-165, complete all as specified and directed.
S & F 35 mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed.
S & F 35 mm thick factory made second class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters for doors as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. complete all as specified.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
M &L for box type steel window with 80 x 40 x1.25 mm MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and including , grill using 12 mm square bar @ 10 cm C/C including , box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note: (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x25mm and 3.0mm thick.
M&L for box type steel ventilator with 80 x 40 x 1.25mm MS tubular frame partly gauged with top hung shutter with and including , grill using 12mm square bars @ 10 cm C /C including box type, hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note : (a) The Glass / gauze shall be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 3.0mm thick.
S & F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified and directed.
S & F 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed.
S & F 3 mm thick sheet frosted/figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed.
S & F 100 mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F 100mm Butt hinges, aluminium cast type, and fixed
S & F 150 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed complete all as specified and directed.
S & F 150 mm size extruded aluminium alloy handle, (ISI marked) fabricated type anodised fixed complete all as specified and directed.
S & F 300 mm long aluminium alloy, anodised, sliding door bolt (ISI marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing with nut bolts(head of nut bolt plain) and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.
S & F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S & F in repairs 25 mm dia stainless steel curtain rod steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed.
S & F 300 mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and directed by Engr-in-Charge.
S & F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.
S & F in repairs 20 to 30 mm wide rubber door seal strip with aluminium holder, fixed in doors with screws, complete all as directed.
S & F in repair brass hat and coat hooks, solid body, 175 mm to 250 mm.
M & L two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as specified and directed.
M & L for preparing surface of steel & iron work of any description exc 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.
S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for structural steel work.
M & L for PCC (1:4:8) type D-2, using 40 mm graded stone aggregate as in foundations, fillings as mass concrete and packing under squatting pan for securing, complete all as specified and directed.
S & F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
Dismantling PVC water tanks of capacity exc 500 but n exc 1000 ltr and removing to store complete all as specified and directed.
S & F double layered WHITE COLOUR 1000 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 Nos 25 mm dia tank nipple and 1 No 32 mm dia drain plug and cover of tank all as specified in SSR Part I complete all as specified and directed.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed.
M & L for cutting bricks chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, complete all as specified and directed.
S & F laying and testing 15 mm dia (normal bore) galvanised iron water tubing 'medium grade' with and including all GI fitting such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls & ceiling or laid in floors concealed or exposed, complete all as specified and directed.
S & F laying and testing 20 mm dia (normal bore) galvanised iron water tubing 'medium grade' with and including all GI fitting such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls & ceiling or laid in floors concealed or exposed, complete all as specified and directed.
S & F in repairs 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 20 mm bore pipe complete all as specified and directed.
S & F in repairs 15 mm dia bib cock, long body with wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed.
S & F in repairs 15 mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.
S & F in repairs stop valves suitable for 15 mm bore iron pipe, cast copper alloy, chromium plated, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs stop valves suitable for 15 mm bore iron pipe, cast copper alloy, chromium plated, with long shank and cup (concealed type), screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed.
S & F in repairs 32 mm dia of waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms complete all as specified.
S & F in repairs PVC flexible waste pipe, 40 mm dia, suitable for WHBs/Urinals including threaded PVC socket suitable for shank of waste coupling complete all as specified.
S & F in repairs grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
S & F in repairs vitreous china wash basin white ,flat,flate back size 630x450 mm excluding taps,waste pipe,chain and plug and procelain stopper but including brackets complete all as specified and directed.
S & F in repairs for 15 mm pillar taps,cast copper alloy fancy type with chromium plated screwed
S & F in repairs 300 x 300 mm glass shelf fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as directed.
S & F in repair 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S & F in repair 15 mm bore brass chromium plated shower 125 mm size complete all as specified and directed.
S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.
S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe).
Demolition of reinforced cement concrete of any description and at any position as in cover slab and like complete all as specified and directed.
M & L for RCC 1:1.5 (Nominal Mix) using 20mm graded agg in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
M & L for reinforced precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:4 complete all as specified and directed. (Reinforcement shall be measured and paid for separately under respective item of schedule 'A').
M & L for mild steel TMT bare 5 to 8 mm dia up to and including 10mm dia. bar in stirrups binder and binding with mild steel wire (annealed) not less than 0.9 mm dia.
M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Form work to soffits of suspended curved slabs such as roof slabs, floor slabs, landings and similar work not exce 200 mm thick, flat, fair finished surfaced.
Formwork to flat chullah hoods, chajjas, troughs and similar items including edges.
Taking down PVC pipe, eaves and gutters (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar including concrete bed of 150 mm internal dia of pipe complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
Removing excavated soils to a distance exc 250 m but n.exc 500 m and depositing where directed.
M & L for returning, filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose and hard/dense soils complete all as specified & directed.
M & L for concrete bed 100 mm thick PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.
M & L for cutting into existing manholes for connecting new drains 150 mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.
S & F 150 mm internal dia of pipe salt glazed stoneware drain pipes, grade 'A' laid in trenches and jointed in cement & sand mortar 1:1,and testing complete all as specified and directed.
S & F of ring fit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.
M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-
One light point controlled by one switch
One ceiling fan controlled by one switch and one regulator
One 6A socket point controlled by one switch on independent board
One 6A socket point controlled by one switch on same board
All as per srl item no. 103 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.
M&L for Circuit/submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length
Notes for item No. 103.00 to 105.00 (i) Quoted rate shall deemed to incude the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & caping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing caping may be used in that portion.
S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.
S&F, Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed.
S&F, Socket, 6 pin, 6/16 Amp, multipurpose 240 volts, complete all as specified and directed.
S&F, Socket, two-in-one, 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed.
S&F, angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed.
Supply and fix electronic fan regulator in 5 steps, 240V, 50Hz complete all as specified and directed.
S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.
S & F 7W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink.
Supply and fix LED batten box type with CRCA sheet steel body pre-wired suitable for and including provision of 1x20/22Watt (4 feet) retrofit LED tube with PC body and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.
Supply and fix LED batten 9W/10W (2 Feet) complete with polycarbonate diffuser and built in with electronic driver including connecting up with twin core twisted flexible copper conductor cable form ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.
Supply and fix LED building security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP 65degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed by Engineer-in-Charge.
Supply and fix MCB distribution board, SPN, 8 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely.
S& F MCB SPN 40 to 63Amp, 10 KA, 'C' curve, 230 V, 50 Hz
All as per srl item no. 118 here-in-before but SP 6 to 32 Amp, 230 V
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 25 sq mm x 2 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing service cable of any description complete all as specified and directed.
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of GI Pipe and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .