SITC OF DG SET

Amount

Supply , Delivery, Testing & Commissioning of 415 Volt, 82.5 KVA, 50 Hz, 3 Phase Silent directly coupled diesel generator set comprising of prime mover, alternator, Microprocessor / relay based AMF control pane, Base frame, Fuel tank, Battery and CPCB approved acoustic enclosure with prime mover of adequate BHP,3 cylinder, liquid cooled, 4 stroke & 24 Volt DC electric starter with protection system and alternator of rating 82.5 KVA at 0.8 p.f (lag) of 3 Phase, 4 Wire system with voltage regulation of +/- 1.0 % Brushless self excited IP: 23 protection with class H insulation etc. (Make:- FG Wilson- cat no.- FB82.5-2( A brand of Caterpillar Co), JACKSON- CUMMINES, ASHOK LEYLAND)

Carrying the D.G. set from the store to the Foundation by hiring Crain to the working site and installation of the same in CC foundation incl. plastering and neat cememt finish as per direction of the EIC.

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Morrum Soil)

Earthing with 50 mm dia, ISI-Medium GI pipe of 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as per GS.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

S & Delivery of 4 x 70 sq. mm. PVC/A Al cable. (Havells/ Polycab)

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry for 4 core 70 sqmm XLPE/PVC armoured cable.

Finishing of the 4 core 70 sqmm XLPE/PVC armoured cable ends by crimping with cable sockets and insulated tapes etc., including supplying sockets, crimping materials, tapes etc. and making connection to switch, BDB and BBC etc.

Making permanent shade for salient DG set by GI sheet on roof after making MS angle iron structure as per direction of EIC.

M.P. SITANI AND SONS