08/EDCE/2023-24

Safe carriage of STP/PCC pole from store center Etawah to site of work. Including loading & unloading at both ends.

Safe carriage of Line material from store center Etawah to site of work. Including loading & unloading at both ends.

Erection and grouting of STP/ PCC Pole duly grouted including necessories clamps, accessories required fixing of HT/LT fittings as per RESPO norms. The support shall be grouted in cement, sand and brick ballast. It including the cost of all labour, T&P etc. required for proper completion of work.

Erection and grouting of double pole structure of 9/8.5 Mtrs long PCC Pole duly grouted including necessories clamps, accessories required fixing of HT/LT fittings as per RESPO norms. The support shall be grouted in cement, sand and brick ballast. It including the cost of all labour, T&P etc. required for proper completion of work.

Installation of stay set with grouting and Nuzzling etc. as per RESPO drawing /norms along with all routine material to be used for such works.

Earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour T&P and required material for such work.

Dismantling & Re-installation of consumer’s cable service connection from existing line feeding consumer supply.

Laying, sagging and stringing and jumpering / binding etc. of Arial Bunch Conductor 3x50 sq mm. in LT lines as per RESPO manual and as per direction of Executive engineer including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work

Laying, sagging and stringing and jumpering / binding etc. of ACSR Weasel/Raccon conductor in 11 KV/ LT lines as per RESPO manual and as per direction of Executive engineer including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work

Dismantling of existing old conductor, from the various area in the respective J.E.’s (Store) as per direction of supervising engineer. It includes the work of cartage the cost of labour T & P carrier etc. required for proper completion of work.

Re-sagging of loose 11 KV./L.T. line as per direction of Executive engineer. It includes the cost of labour, T&P etc required for proper completion of work.

Re-nuzzling of old stay set by opening old binding for better straightening of pole and re-sag the existing conductor of H.T/L.T line properly as per direction of supervising engineer.

Straightening of 8.5/9 Mtr. Long PCC/ST/Rail Pole tilted pole at various places by straightening of pole including the cost of labour ,T&P charges required for proper completion of work.

Chopping of Tree branches to Clear the line route to give horizontal and vertical clearance to the line including cost of labour T&P etc.

Repairing/ resagging/ new guarding of HT/LT Line with GI wire as per RESPO Norms.

Replacement of following broken/damaged/ missing accessories by new accessories including opening of the same and refixing. (i) 11 KV line jumper

(ii) LT line jumper

(iii)11 KV pin insulator

(iv)33 KV disc insulator

(v) Cross arms holding clamps

(vii) Stays Clamp

Carriage of Scrap Material (11/13 Mtrs. long Damaged ST pole from Pit Site to J.E Store Kunera Etawah including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.

INDIAN ELECTRICALS

M/S Pradeep Kumar Dohare