GE/SP/TOKEN-51/2021-2022

Amount

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified and as directed by Engr-in-charge.

Demolition of Stone slabs and tiles laid in cement mortar of any description or thickness in floors, aprons etc. removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and as directed by Engr-in-charge.

M&L for sand filling under floor or in foundation including watering & consolidation complete all as specified and directed by Engineer-in-Charge.

S&F precast machine pressed PCC interlocking paver block rubber moulded of 60 mm thickness, M-35 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and as directed by Engr-in-charge.

M&L precast cement concrete rubber moulded in approved design in kerb stone, with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM mortar 1:4 complete with joints to match complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete 1:2:4 type B-1(20mm graded aggregate), 40mm thick complete all as specified and as directed by Engr-in-charge.

M & L for heavy duty 20 – 22 mm thick designers coloured glossy finished cement concrete floor chequered tiles of size (30x30cm) or next higher size and design as approved set and jointed in neat cement slurry laid over cement screed complete all as specified and as directed by Engr-in-charge.

M & L for screed bedding 15 mm thick on concrete surfaces in cement mortar 1: 6 even and fair complete all as specified and as directed by Engr-in-charge.

Material and labour for 18-20 mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry @ 3Kg/Sqm, laid over and including 15mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-charge.

Material and labour, machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed by Engr-in-charge.

Dismantling roof sheets / wall cladding etc complete all as specified and as directed by Engr-in-charge.

Dismantling structural steel work etc complete all as specified and as directed by Engr-in-charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated/ style pattern steel sheet 0.50mm thick fixed to steel frame with self tapping screw (as direced) with rubber washer in roofs , complete all as specified and directed by Engr-in-charge.

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

Excavation in hard/dense soil for post holes or similar holes each n. exc. 0.5Cum getting out returning filling and ramming earth or broken rabble mixed with earth around in layer n. exc. 25cm complete all as specified and as directed by Engr-in-charge.

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation etc complete all as specified and as directed by Engr-in-charge.

S&F Joist, channel, angle, or tee sections etc. with Fe-290 (Gde E165) quality A complete complete all as specified and as directed by Engr-in-charge.

S & F steel work in tubular trusses, rafters and posts etc including special shaped washer etc. complete using ERW or induction butt welded Square/ Rectangular tubes conforming to IS-1161-1979 (grade st-240)all as specified and directed by Engineer - in - Charge.

S&F Mild steel plates (plain or chequered) channels, square cut or notched etc complete all as specified and directed by Engineer - in - Charge .

Taking down of double leaf steel gate and refixing on same location incl repair /replaement to holdfast,locking device complete all as specified and as directed by Engr-in-charge.

M&L for framed work as in doors or gates of angle or other section with gusset plates, with Fe-290 (Gde E165) quality A complete all as specified., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified.

M&L two coats synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and as directed by Engr-in-charge.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

S&F Glass mosaic tiles 4mm thick of size 20x20mm or 10x10mm with beveled edge and conner joints will be fixed to the floor side of swimming pool as per manufacture's instruction using glass mosaic tiles adhesive. Instruction for Fixing Glass Mosaic Tiles - i. The surface to be covered must be perfectly dry, clean and smooth. Spread the adhesive preferably rubber latex, on wall. Uniform the adhesive by means of a toothed trowel of 2mm or as per manufacturers instructions. ii. Apply the mosaic sheets setting them inline so as to be obtain a currect vertical and horizontal meeting of the joints. Tap the sheets with a wooden or rubber trowel to ensure adequate adhesion. iii. Wet thoroughly with a sponge the backing paper. iv. Wait for the water to seep across the than peel the paper off holding it by a corner. v. Fill the joints between the tiles with a slurry. vi. Then, clean the mosaic carefully with a wet sponge and subsequent with a dry rag.

S&F in repairs PVC swimming pool overflow greating (heavy duty) 15-20mm thick and not exceeding 300mm wide as specified and directed by engr in charge.

M&L for vitrified double charge ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specified and directed.

All as per item No 27 above but in dado over 10mm thick rendering in CM 1:4

M&L First quality, Non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, and leveling the floor with PCC 1:2:4 type B0 of required thickness if required to maintain slope etc. complete all as specified.

S&F glazed ceramic coloured tiles in vertical surface 450mmx 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering in cement mortar 1:4 complete all as spd and directed

S&F glazed ceramic coloured tiles in vertical surface 200mmx 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering in cement mortar 1:4 complete all as spd and directed

Demolition of brick work built in cement mortar including all quains, arches, pillers etc and removing debries out site MOD land complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class B bricks of old size built in cement mortar 1:4 straight or curved on plan exceeding 6m mean radius complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints , hacking for key and scrubbing down with watercomplete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plastered or concrete surfaces of wall and applying two coat of cement base paint over a coat of lime wash complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plastered or concrete surfaces of wall and applying two coats of exterior weather proof emulsion paint complete all as specified and as directed by Engr-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and remove the debris outside from MOD land complete all as specified and directed.

S & F in repair precast factory made polycrete (SFRC) Medium duty main hole covers 80 mm thick rectangle in shape upto 0.60 sqm area for main hole with at least 5 cm bearing each sid complete all as specified and as directed by Engineer-in-Charge.

S & F in repair 80mm thick precast factory made polycrete (SFRC) medium duty perforated drain cover complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm grade stone aggregate) in plinth protection finished even and smooth without using extra cement including necessary form work complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed by Engr-in-charge.

Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed by Engr-in-charge.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors incl Cutting chases complete all as specified and as directed by Engr-in-charge.

S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors incl Cutting chases complete all as specified and as directed by Engr-in-charge.

S&F in repair 5mm thick glass sheet front shelf 12 mm wide with CP bracket guard and railing 60 cm long complete all as specified and as directed by Engr-in-charge.

S&F in repair 5 mm thick glass corner with 12" dia with steel railing and fixed with CP screw & cup washer on wall.

M & L for preparation of old surfaces and applying one coat of plastic emulsion paint on wall surface complete all as specified and as directed by Engr-in-charge.

M&L complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primercomplete all as specified and as directed by Engr-in-charge.

M&L complete removal of existing treatment on ceilling and applying two coats of oil bound distemper over a coat of primer all as specified and directed

M & L complete removal of existing treatment of walls and applying two coats of exterior weather proof emulsion paint complete.

M & L complete removal of existing treatment, as preparation of old decorated surface of walls and applying two coats of cement based paint complete.

M&L preparation of old plastered surface of walls/ceiling and applying 1 mm thick wall care putty complete.

M & L for preparation of old painted wooden/steel/concrete surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete.

Supply and fixing, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed.

S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.

Demolition of RCC precast jalli of any thickness, complete all as specified.

Providing precast cement concrete louvers and jallies , 35 mm thick including all mouldings type B-0 1:2:4 ( 12.5 mm graded stone aggregate) set in CM 1: 6 complete all as specified and directed.

M & L for PCC 1 : 2 : 4 type B - 1 (Using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges coping benching etc including like weathering, slightly rounded or chamfered angles and throating complete.

M&L for reinforcement cement concrete (1:2:4) type B-1 using 20mm graded aggregate in man holes covers slabs/ Shelves as in slabs supported on walls, beams and columns, in floors, roofs, landings, deck slabs and in shelves and like including necessary form work, complete all as specified and directed by Engr-in-Charge.all as specified.

M/L for TMT mild steel bars of 10 mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L 18-20mm thick granite ( of any type) work (table rubbed and polished ) in cooking plateform, shelves and the like, over and including 15mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including taking out the old broken stone complete all as specified and directed.

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge.

S & F in repair Bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, 15mm bore complete.

S & F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe complete all as specified.

S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs Chromium plated brass shower rose 125 mm size with or witout swivel joints including fixing with 15 mm bore pipe, fixed in repairs, complete all as specified.

S&F in Repair Towel rail 600 mm long, 20 mm dia, ‘D’ type, brass, chromium plated, fixed to walls with screws and plastic cleats, fixed in repairs, complete all as specified.

S&F in repairs Wash basins, vitreous china, white, Oval type/flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and directed.

Supply and fix in repair Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), including connection to water pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed by Engineer - in -Charge.

S&F Plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, fixed in repairs, complete all as specified and directed by Engineer - in -Charge.

S&F in repairs CP paper holder of Make-AHS-1553 of Jaquar or equivalent. complete all as specified and directed.

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

S & F in repairs Vitreous China urinals,flat back large pastal colour Make : Hindware Cat part No 60002 complete including spreader and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipecomplete all as specified.

Taking down aluminium door shutter of any size upto 4 Sqm each and replacement of defecting pivot with new pivot & refixing in position complete all as specified and directed by Engineer-in-Charge.

Taking down aluminium door shutters of any size upto 4 Sqm each replacement of defecting floor spring with new floor spring

S&F in repair dead lock 6 lever brass for aluminium door shutter complete all as specified and directed by Engineer-in-Charge.

Taking down old broken prelaminated board/glass from aluminium door, window or partition panel by removing glass clips and fixed prelaminated board/Glass in any size and refixing the glass clips in position after replacing rubber gasket complete all as specified and directed by Engineer-in-Charge. Note :- Glass and pre laminated board will be measured and paid separately.

S&F 12 mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work complete.all as specified and directed by Engineer - in - Charge .

S&F in repair Hydraulic door closer for aluminium door shutter complete all as specified and directed by Engineer-in-Charge.

Hindustan Co.Co

M/S MG GROUP

J D ENTERPRISES

shakti construction

Mahesh Enterprises