REPAIRS/POLISHING/PAINTING OF WOODEN/STEEL FURNITURE AND CHARPOY GI UNDER GE DINJAN

Amount

M&L for repairs to sofa chair (single seat) by taking down the existing broken /unserviceable wooden arm and replacing the same with new wooden (as per the existing specifications) arm after cutting, made to shape and size as required all as shown on drawing and all as specified and as directed. (Drg No. FD-281/373/258)

All as per serial item No. 01 above but replacing front/rear leg..

All as per serial item No. 01 above but replacing front/back rail.

All as per serial item No. 01 above but replacing side rail.

All as per serial item No. 01 above but replacing top/bottom rail of back.

All as per serial item No. 01 above but replacing battens.

M&L for repairs to sofa set (three seater) by taking down the existing broken /unserviceable wooden arm and replacing the same with new wooden (as per the existing specifications) arm after cutting, made to shape and size as required all as shown on drawing and all as specified and as directed . (Drg No. FD-281/373/258)

All as per serial item No. 07 above but replacing front/rear leg.

All as per serial item No. 07 above but replacing long/back rail.

All as per serial item No. 07 above but replacing side rail.

All as per serial item No. 07 above but replacing top/bottom Rail of Back.

All as per serial item No. 07 above but replacing battens.

S&F in repalcement high density (32 Density) P.U. foam cushion of size 530mm x560mmx100mm of approve quality and covered with new superior quality tapestry cloth of exactly same size and quality as per existing and as approved complete all as specified and as directed. Make : Foam cushion : Sleepwell/Century/Kurlon) (Drg No. FD-281/373/258)

M&L for repairs to Chair Dining by taking down the existing broken /unserviceable wooden Front leg (left & right) and replacing the same with new wooden (as per the existing specifications) Front leg after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-228, 279)

All as per serial item No. 14 above but replacing Rear leg (left & right). (Drg No. FD- 228, 279)

All as per serial item No. 14 above but replacing seat member (front, rear, left & right). (Drg No. FD-228, 279)

All as per serial item No. 14 above but replacing Stiffener. (Drg No. FD-228, 279)

All as per serial item No. 14 above but replacing Back Support Rail. (Drg No. FD- 228, 279)

Removing of old broken components of chair dining offrs and S&F new components made out of second class hard wood without crack and knobs of similar size, shape planed and fixed with teak wood pining and fevicol as under :- (Drg No FD/MAP-II/04)

All as per serial item No. 19 above but replacing front leg as specified & shown in drg. (Drg No FD/MAP-II/04)

All as per serial item No. 19 above but replacing Rear leg as specified & shown in drg. (Drg No FD/MAP-II/04)

All as per serial item No. 19 above but replacing Stiffner as specified & shown in drg. (Drg No FD/MAP-II/04)

All as per serial item No. 19 above but replacing Front rear/ side rail of seat as specified & shown in drg. (Drg No FD/MAP-II/04)

All as per serial item No. 19 above but replacing Vertical strip as specified & shown in drg. (Drg No FD/MAP-II/04)

All as per serial item No. 19 above but replacing Back rest as specified & shown in drg. (Drg No FD/MAP-II/04)

All as per serial item No. 19 above but replacing Seat using 12mm thick (7 ply) commercial ply wood BWR grade Type BB as specified & shown in drg. (Drg No FD/MAP-II/04)

Replacement of old U/S foam cushion and S&F of new cushion of size 420mmx 445mm and 75mm thick of 32mm density of Make - Cool foam or equivalent make duly covered with tapestry cloth as approved by GE. (Drg No FD/MAP-II/04)

Removing of old tapestry cloth from the exisiting cushion and S&F new tapestry cloth only of same size and shape as specified and shown in Drg. (Drg No FD/MAP-II/04)

M&L for taking down the existing unserviceable plastic cane of chair dining and supply & fix new PVC seat of suitable size as specified and as directed by Engr-in-Charge. (Drg No. FD-229/FD/MAP-11/05)

M&L for repairs to Chair Easy by taking down the existing broken/unserviceable wooden Arm and replacing the same with new wooden (as per the existing specifications) arm after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-229 )

M&L for repairs to Chair Easy by taking down the existing broken /unserviceable wooden seat member (Front/Rear/left/right) and replacing the same with new wooden (as per the existing specifications) seat member (Front/Rear/left/right) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-229 )

M&L for repairs to Chair Easy by taking down the existing broken /unserviceable wooden Bottom Rail of Back and replacing the same with new wooden (as per the existing specifications) Top/Bottom Rail of Back after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 229 )

M&L for repairs to Chair Easy by taking down the existing broken /unserviceable wooden legs and replacing the same with new wooden (as per the existing specifications) legs after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 229 )

M&L for taking down the existing unserviceable plastic cane of Chair Easy and supply & fix new cushion of suitable size as specified and directed by Engr-in-charge. (Drg No. FD- 229)

M&L for repairs to Chair writing by taking down the existing broken /unserviceable wooden Leg and replacing the same with new wooden (as per the existing specifications) Front/Rear Leg after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 280 )

M&L for repairs to Chair writing by taking down the existing broken /unserviceable wooden Arm and replacing the same with new wooden (as per the existing specifications) Arm after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-280 )

M&L for repairs to Chair writing by taking down the existing broken /unserviceable wooden Seat member (Front, rear, left & right) and replacing the same with new wooden (as per the existing specifications) Seat member (Front, rear, left & right) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-280 )

M&L for repairs to Chair writing by taking down the existing broken/unserviceable wooden Stiffener and replacing the same with new wooden (as per the existing specifications) Stiffener after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-280 )

M&L for repairs to Chair writing by taking down the existing broken /unserviceable wooden Back Support and replacing the same with new wooden (as per the existing specifications) Back Support after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 280 )

M&L for removing existing old/unserviceable canes from all types of chairs and recaning the same in godrej pattern using new plastic cane of suitable of size as shown on relevent drawings and as per existing complete all as specified and as directed. (Drg No. FD-228/279, 229, 280)

M&L for repairs to Table Writing by taking down the existing broken /unserviceable wooden Leg and replacing the same with new wooden (as per the existing specifications) Leg after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 275 )

M&L for repairs to Table Writing by taking down the existing broken /unserviceable wooden Side Stiffener and replacing the same with new wooden (as per the existing specifications) Side Stiffener after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 275 )

M&L for repairs to Table Writing by taking down the existing broken /unserviceable wooden Centre Stiffener and replacing the same with new wooden (as per the existing specifications) Centre Stiffener after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 275 )

M&L for repairs to Table Writing by taking down the existing broken /unserviceable wooden Long Rail and replacing the same with new wooden (as per the existing specifications) Long Rail (Front/Rear) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 275 )

M&L for repairs to Table Writing by taking down the existing broken /unserviceable wooden Side Rail and replacing the same with new wooden (as per the existing specifications) Side Rail after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 275 )

M&L for repairs to Table Writing by taking down the existing broken /unserviceable wooden Bearer and replacing the same with new wooden (as per the existing specifications) Bearer after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 275 )

M&L for repairs to Table Writing by taking down the existing broken /unserviceable wooden Back side (Left/Right) of Cabinet and replacing the same with new wooden (as per the existing specifications) Back side (Left/Right) of Cabinet after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 275 )

M&L for repairs to Drawer of Table Writing by taking down the existing broken /unserviceable wooden Top/ Bottom of cabinet and replacing the same with new wooden (as per the existing specifications) Top/Bottom of cabinet after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 275 )

M&L for repairs to Table Writing by taking down the existing broken /unserviceable Table top and supply and fixing of new top of suitable size made of 18 mm thick prelaminated particle board one side with approved shade and other side balancing white including all around second class hard wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD- 275 )

M&L for Repairs to Table Writing by taking down the existing broken /unserviceable Shutter of table writing and replacing the same with new Shutter of table writing (as per the existing specifications) after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 275 )

M&L for Repairs to Table Writing by taking down the existing broken /unserviceable drawer complete and replacing the same with new drawer made out of ply wood and timber frame work as complete (as per the existing size and specification) made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 275 )

M&L for repairs to Side Board by taking down the existing broken /unserviceable top/bottom and supply and fixing of new top/bottom of suitable size made of 18 mm thick prelaminated particle board one side with approved shade and other side balancing white including all around second class hard wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD- 241 )

All as per serial item No. 52 above but side (left/right) of side board.

M&L for repairs to Side Board by taking down the existing broken /unserviceable shelf and supply and fixing of new shelf of suitable size made of 12 mm thick prelaminated particle board including all around second class hard wood beading of 4 mm x 12 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD- 241 )

All as per serial item No. 54 above but partition of side board. (Drg No. FD- 241 )

M&L for repairs to Side Board by taking down the existing broken /unserviceable back and supply and fixing of new back of suitable size made of 6 mm thick (5 ply) plywood, commercial type Grade BWR complete all as specified and as directed and as shown on drawing. (Drg No. FD- 241)

M&L for repairs to Drawer of Side Board by taking down the existing broken /unserviceable wooden Shutter and replacing the same with new front (as per the existing specifications) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 241)

All as per serial item No. 57 above but side (left/right) of drawer.

All as per serial item No. 57 above but back (Front/Rear) of drawer.

All as per serial item No. 57 above but bottom of drawer.

M&L for repairs to Side Board by taking down the existing broken /unserviceable wooden Leg and replacing the same with new wooden (as per the existing specifications) Leg after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 241)

All as per serial item No. 61 above but bottom long stiffner.

All as per serial item No. 61 above but Short stiffner.

M&L for repairs to TABLE DRESSING LADIES by taking down the existing broken /unserviceable top/bottom and supply and fixing of new top/bottom of suitable size made of 18 mm thick prelaminated particle board one side with approved shade and other side balancing white including all around second class hard wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD-251 )

All as per serial item No. 64 above but Sides of TABLE DRESSING LADIES.

All as per serial item No. 64 above but back of TABLE DRESSING LADIES.

Dismantling/taking out carefully for replacement of old existing broken mirror of Table Dressing ladies and S & F (new) Mirror 5.5 mm thick of dimensions as shown on drawings complete all as specified and as directed. (Drg No. FD- 251 ) Make : Modiguard/Atul/Swastik.

Dismantling/taking out carefully for replacement of existing old / broken back ply on frame of mirror of Table Dressing ladies and S & F (new) back ply 6mm thick (5 ply) commercial type, BWR (As per the existing specifications) complete all as shown on drawing, as specified and as directed. (Drg No. FD- 251 )

Dismantling/taking out carefully for replacement of existing old / broken back ply of box of Table Dressing ladies and S & F (new) back ply of box 6mm thick (5 ply) commercial type, BWR (As per the existing specifications) complete all as shown on drawing, as specified and as directed. (Drg No. FD-251 )

Dismantling/taking out carefully for replacement of old existing knobs and S & F (new) 35 mm dia, brass chromium plated knob complete all as shown on drawing all as specified and as directed.

Dismantling/taking out carefully for replacement of old existing broken aluminium channel for sliding glass of Table Dressing ladies and S & F (new) aluminium channel of size 10mm x 22mm of dimensions as shown on drawing complete all as specified and as directed. (Drg No. FD- 251 )

M&L for repairs to Table Dressing ladies by taking down the existing broken /unserviceable wooden Leg and replacing the same with new wooden (as per the existing specifications) Leg after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 251 )

M&L for Repairs to Table Dressing ladies by taking down the existing broken /unserviceable wooden Bottom long stiffner and replacing the same with new wooden (as per the existing specifications) Bottom long stiffner after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 251 )

M&L for repairs to Table Dressing ladies by taking down the existing broken /unserviceable wooden Stiffiner short and replacing the same with new wooden (as per the existing specifications) Stiffiner short after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 251 )

Dismantling/taking out carefully for replacement of old existing broken sliding glass of Table Dressing ladies and S & F (new) sliding glass, 4 mm thick of dimensions as shown on drawings complete all as specified and as directed. (Drg No.FD- 251 )

M&L for repairs to TABLE DRESSING GENTS by taking down the existing broken /unserviceable top/bottom and supply and fixing of new top/bottom of suitable size made of 18 mm thick prelaminated particle board one side with approved shade and other side balancing white including all around second class hard wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD-230 )

All as per serial item No. 76 above but Sides of TABLE DRESSING GENTS.

Dismantling/taking out carefully for replacement of old existing broken mirror of TABLE DRESSING GENTS and S & F (new) Mirror 5.5 mm thick of dimensions as shown on drawings complete all as specified and directed (Make : Modiguard/Atul/Swastik). (Drg No. FD-230 )

Dismantling/taking out carefully for replacement of existing old / broken back ply of mirror of TABLE DRESSING GENTS and S & F (new) back ply 6mm thick, BWR grade made out from well seasoned hard wood (As per the existing specifications) complete all as shown on drawing, as specified and as directed. (Drg No. FD-230 )

M&L for repairs to Drawer of TABLE DRESSING GENTS by taking down the existing broken /unserviceable wooden Front/rear and replacing the same with new wooden (as per the existing specifications) Front/rear after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 230 )

M&L for repairs to Drawer of TABLE DRESSING GENTS by taking down the existing broken /unserviceable wooden Side (Left/Right) and replacing the same with new wooden (as per the existing specifications) Side after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-230)

M&L for repairs to Drawer of TABLE DRESSING GENTS by taking down the existing broken /unserviceable wooden Bottom and replacing the same with new wooden (as per the existing specifications) Bottom after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-230)

S&F for repairs hanging key hook all as shown on drawing complete all as specified and as directed. (Drg No. FD - 230)

M&L for repairs to PEG TABLE by taking down the existing broken /unserviceable wooden Leg and replacing the same with new wooden (as per the existing specifications) Leg after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-236, 277)

M&L for repairs to PEG TABLE by taking down the existing broken /unserviceable wooden Side rail (Left/Right) and replacing the same with new wooden (as per the existing specifications) Side rail (Left/Right) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 236, 277)

M&L for repairs to PEG TABLE by taking down the existing broken /unserviceable wooden Front/Rear rail and replacing the same with new wooden (as per the existing specifications) Front/Rear rail after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-236, 277)

M&L for repairs to PEG TABLE by taking down the existing broken /unserviceable wooden Side stiffner and replacing the same with new wooden (as per the existing specifications) Side stiffner after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 236, 277)

M&L for repairs to PEG TABLE by taking down the existing broken /unserviceable wooden Centre stiffner and replacing the same with new wooden (as per the existing specifications) Centre stiffner after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 236, 277)

M&L for repairs to PEG TABLE by taking down the existing broken /unserviceable top and supply and fixing of new top of suitable size made of 18 mm thick prelaminated particle board including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD-236, 277 )

M&L for repairs to TAEPOY WOODEN by taking down the existing broken /unserviceable wooden Leg and replacing the same with new wooden (as per the existing specifications) Leg (Front/Rear) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 232, 278)

M&L for repairs to TAEPOY WOODEN by taking down the existing broken /unserviceable wooden Side rail (Left/Right) and replacing the same with new wooden (as per the existing specifications) Side rail (Left/Right) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-232, 278)

M&L for repairs to TAEPOY WOODEN by taking down the existing broken /unserviceable wooden Front/Rear rail and replacing the same with new wooden (as per the existing specifications) Front/Rear rail after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-232, 278)

M&L for repairs to TAEPOY WOODEN by taking down the existing broken /unserviceable wooden Side stiffner and replacing the same with new wooden (as per the existing specifications) Side stiffner after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-232, 278)

M&L for repairs to TAEPOY WOODEN by taking down the existing broken /unserviceable wooden Centre stiffner and replacing the same with new wooden (as per the existing specifications) Centre stiffner after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD-232, 278)

M&L for repairs to TAEPOY WOODEN by taking down the existing broken /unserviceable top and supply and fixing of new top of suitable size made of 18 mm thick prelaminated particle board one side with approved shade and other side balancing white including all around second class hard wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD-232, 278)

M&L for repairs to TABLE CENTRE by taking down the existing broken /unserviceable wooden Leg and replacing the same with new wooden (as per the existing specifications) Leg (Front/Rear) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 235, 274)

M&L for repairs to TABLE CENTRE by taking down the existing broken /unserviceable wooden Side Rail (Left/Right) and replacing the same with new wooden (as per the existing specifications) Side Rail (Left/Right) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 235, 274)

M&L for repairs to TABLE CENTRE by taking down the existing broken /unserviceable wooden Front/Rear Rail and replacing the same with new wooden (as per the existing specifications) Front/Rear Rail after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 235, 274)

M&L for repairs to TABLE CENTRE by taking down the existing broken /unserviceable wooden Side stiffner and replacing the same with new wooden (as per the existing specifications) Side stiffner after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 235, 274)

M&L for repairs to TABLE CENTRE by taking down the existing broken /unserviceable wooden Centre stiffner and replacing the same with new wooden (as per the existing specifications) Centre stiffner after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 235, 274)

M&L for repairs to TABLE CENTRE by taking down the existing broken /unserviceable top and supply and fixing of new top of suitable size made of 18 mm thick prelaminated particle board one side with approved shade and other side balancing white including all around second class hard wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD- 235, 274)

M&L for repairs to Table 3' x 2' with/without drawer by taking down the existing broken /unserviceable wooden Front/Rear Leg and replacing the same with new wooden (as per the existing specifications) Front/Rear Leg after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 231, 284)

M&L for repairs to Table 3' x 2' with/without drawer by taking down the existing broken /unserviceable wooden Front/Rear Rail and replacing the same with new wooden (as per the existing specifications) Front/Rear Rail after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 231, 284)

M&L for repairs to Table 3' x 2' with/without drawer by taking down the existing broken /unserviceable wooden Side Rail (Leaft/Right) and replacing the same with new wooden (as per the existing specifications) Side Rail (Leaft/Right) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 231, 284)

M&L for repairs to Table 3' x 2' with drawer by taking down the existing broken /unserviceable wooden Side stiffner (Left/Right) and replacing the same with new wooden (as per the existing specifications) Side stiffner (Left/Right) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 231, 284)

M&L for repairs to Table 3' x 2' with/without drawer by taking down the existing broken /unserviceable top and supply and fixing of new top of suitable size made of 18 mm thick prelaminated particle board one side with approved shade and other side balancing white including all around second class hard wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD-231, 284)

M&L for repairs to Table 3'x3' by taking down the existing broken /unserviceable wooden Leg (Front/Rear) and replacing the same with new wooden (as per the existing specifications) Leg (Front/Rear) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 88(M), 291)

M&L for repairs to Table 3'x3' by taking down the existing broken /unserviceable wooden Front/Side Rail (Left/Right) and replacing the same with new wooden (as per the existing specifications) Front/Side Rail (Left/Right) after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 88(M), 291)

M&L for repairs to Table 3'x3' by taking down the existing broken /unserviceable wooden Cross Stiffner and replacing the same with new wooden (as per the existing specifications) Cross Stiffner after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. (Drg No. FD- 88(M), 291)

M&L for repairs to Table 3'x3' by taking down the existing broken /unserviceable top and supply and fixing of new top of suitable size made of 18 mm thick prelaminated particle board one side with approved shade and other side balancing white including all around second class hard wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and as directed and as shown on drawing. (Drg No. FD- 88(M), 291)

Removing of old damaged/unserviceable head board of bed and supply & fixing new head board using hard wood for frame work including providing suitable size 4mm thick plywood (3 ply), Grade - I, (with BWR resin) with one side decorative face including 4 mm thick round bead and refixed to bed complete all as specified and shown on drawing. (Drg No. FD-246/24/21(M))

Removing of old damaged/unserviceable foot board of bed and supply & fixing new foot board using hard wood frame work including providing suitable size 4mm thick plywood (3 ply), Grade - I, (with BWR resin) with one side decorative face including 4 mm thick round bead and refixing the same to bed complete all as specified and shown on drawing. (Drg No. FD-246/24/21(M))

Taking out carefully old / unserviceable ply wood (both side) from head board of Bed plywood top without damaging the adjoining parts and S & F Ply wood BWR grade, one side teak veneered, 4 mm thick (3 ply) including 6mm thick hard wood beading all-round the edges of boards all as shown on drawings complete as specified and directed. (Drg No. FD-246/24/21(M))

Taking out carefully old / unserviceable ply wood (both side) from foot board of Bed plywood top without damaging the adjoining parts and S & F Ply wood BWR grade, one side teak veneered, 4 mm thick (3 ply) including 6mm thick hard wood beading all-round the edges of boards all as shown on drawings complete as specified and directed. (Drg No. FD-246/24/21(M))

Removing old damaged/unserviceable long rails of bed plywood top and supply & fixing new long rails made of hardwood as per the existing shape and size complete all as specified and shown on drawing. (Drg No. FD-246)

Removing old damaged/unserviceable Short rails of bed plywood top and supply & fixing new Short rails made of hardwood as per the existing shape and size complete all as specified and shown on drawing. (Drg No. FD-246)

Removing old damaged plywood top and supply & fixing new plywood of suitable size, 12mm thick (7 ply) commercial, grade BWR, type BB complete all as specified and shown on drawing. (Drg No. FD-246)

Taking down the existing damaged /unserviceable Leg of table dinning 6/8 person and replacing the same with new Leg (Front/Rear) of hard wood after cutting, made to shape and size complete all as specified and shown on drawings. (Drg No. FD-273/239)

Taking down the existing damaged /unserviceable Rail of table dinning 6/8 person and replacing the same with new Rail (Front/Rear) of hard wood after cutting, made to shape and size complete all as specified and shown on drawings. (Drg No. FD-273/239)

Taking down the existing damaged /unserviceable Side Rail (Left/Right) of table dinning 6/8 person and replacing the same with new Side Rail (Left/Right) of hard wood after cutting, made to shape and size complete all as specified and shown on drawings. (Drg No. FD-273/239)

Taking out broken/unserviceable top of Table Dining for 6/8 person and supply and fixing new top of suitable size made of 18 mm thick prelaminated particle board one side with approved shade and other side balancing white including all round second class hard wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and shown on drawings. (Drg No. FD-273/239)

M&L for preparation of old wooden polished surfaces of Sofa chair (Single seater) by rubbing down the old polish from the wooden surfaces including the new fixed wooden parts with sand paper, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish as per manufacturers instruction till glossy finish is achieved complete all as specified and as shown on drawing. (Drg No. FD- 281/258/373)

All as per serial item No. 122 above but Sofa set three seater. (Drg No. FD- 281)

All as per serial item No. 122 above but Sofa set two seater. (Drg No. FD- 281)

All as per serial item No. 122 above but bed hard. (Drg No. FD- 246)

All as per serial item No. 122 above but Chair dinning. (Drg No. FD-228, 279)

All as per serial item No. 122 above but Chair dinning Offrs. (Drg No. FD/MAP-11/04)

All as per serial item No. 122 above but Chair Easy. (Drg No. FD- 229)

All as per serial item No. 122 above but Chair Writing. (Drg No. FD-280)

All as per serial item No. 122 above but Table Writing. (Drg No. FD- 275)

All as per serial item No. 122 above but Table Dressing Ladies. (Drg No. FD- 251)

All as per serial item No. 122 above but Table Dressing Gents. (Drg No. FD- 230)

All as per serial item No. 122 above but Peg Table. (Drg No. FD- 236, 277)

All as per serial item No. 122 above but Teapoy wooden. (Drg No. FD-232, 278)

All as per serial item No. 122 above but Table Centre. (Drg No. FD-235,274)

All as per serial item No. 122 above but Table 3'x2' with/without drawer. (Drg No. FD- 231, 284)

All as per serial item No. 122 above but Table 3'x3'. (Drg No. FD-88(M), 291)

All as per serial item No. 122 above but Table Dinning 6/8 person. (Drg No. FD-273/239)

M&L for preparation of old painted steel surfaces (Externally and internally including shelves etc) of Almirah Steel Large by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler including welding all loose joints and applying a coat of olive green synthetic enamel paint (1st Grade quality) using spray machine complete all as specified and as directed. (FD-1031/67(M))

All as per serial item No. 139 above but Almirah Steel Med. (FD-1032/243/67(M))

All as per serial item No. 139 above but Chair steel tubular with arms. (FD-75(M))

All as per serial item No. 139 above but Chair steel tubular without arms. (FD-75(M)).

All as per serial item No. 139 above but Rack steel 6 tier. (FD-106(M))

All as per serial item No. 139 above but Rack steel 3 tier. (FD-106(M))

All as per serial item No. 139 above but Table Office clerk steel. (FD-1004/84(M))

All as per serial item No. 139 above but Locker steel. (FD-1029/257)

All as per serial item No. 139 above but Table office officer complete and ditto. (FD-1004/84(M))

All as per serial item No. 139 above but Table 900x900x760mm steel. (FD-1009)

All as per serial item No. 139 above but Table 3'x2' with drawer steel. (FD-1008).

All as per serial item No. 139 above but Table 3'x2' without drawer steel. (FD-1008)

All as per serial item No. 139 above but Rack steel. (FD-129)

All as per serial item No. 139 above but Side rack with tray steel. (FD-97(M))

All as per serial item No. 139 above but Stool steel. (FD-119(M))

Taking out unserviceable broken leg from Almirah Steel Large and supply & fixing new leg made out of 1mm thick MS sheet suitable for almirah large steel & welded including two coats of synthetic enamel paint over a coat of primer complete all as directed and shown on drawing. (FD-1031/67(M))

All as per item No. 154 above but for almirah steel medium. (FD-1031/67(M))

Removing of old unserviceable lock without damaging the adjacent parts of Almirah Steel Large and supply & fixing new MS lock of size 65 mm with 02 numbers stainless steel keys to almirah large steel complete all as directed and shown on drawing. (FD-1031/67(M))

Removing of old unserviceable lock without damaging the adjacent parts of Almirah Steel medium and supply & fixing new MS lock of size 65 mm with 02 numbers stainless steel keys to almirah large steel complete all as directed and shown on drawing. (FD-1031/67(M))

Removing of old unserviceable handles without damaging the adjacent parts of Almirah Steel Large and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as specified and as directed. (FD-1031/67(M))

Removing of old unserviceable handles without damaging the adjacent parts of Almirah Steel Medium and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as specified and as directed. (FD-1031/67(M))

Dismantling carefully and taking out old unserviceable/damaged inside steel lock cover Almirah Steel Large and supply and fixing new lock cover made out of MS sheet 1mm thick bent to required size and shape as per drawing suitable for three way locking device and fixed with suitable size MS screws for including painting over a coat of primer complete all as directed. (FD-1031/67(M))

Dismantling carefully and taking out old unserviceable/damaged inside steel lock cover Almirah Steel Medium and supply and fixing new lock cover made out of MS sheet 1mm thick bent to required size and shape as per drawing suitable for three way locking device and fixed with suitable size MS screws for including painting over a coat of primer complete all as directed. (FD-1031/67(M))

Dismantling carefully and taking out old unserviceable/damaged shelf of Almirah Steel Large and supply and fixing new shelf made out of MS sheet 1mm thick bent to required size and shape and welding the same properly in position including painting over a coat of primer complete all as directed. (FD-1031/67(M))

Dismantling carefully and taking out old unserviceable/damaged shelf of Almirah Steel Medium and supply and fixing new shelf made out of MS sheet 1mm thick bent to required size and shape and welding the same properly in position including painting over a coat of primer complete all as directed. (FD-1031/67(M))

Supply and fixing in relacement with new three way locking device of Almirah Steel Large, 10mm dia, mild steel rod and brass shackels complete with fixing accessories complete all as shown in the drawing and as directed. (FD-1031/67(M))

S&F in relacement with new three way locking device of Almirah Steel Medium, 10mm dia, mild steel rod and brass shackels complete with fixing accessories complete all as shown in the drawing and as directed. (FD-1031/67(M))

S&F for Seat frame of Chair Steel Tubular With Arms made out of well seasoned hard wood (As per existing specifications) including caning as per the existing size using new plastic cane including taking down the existing unserviceable one as shown on drg and as specified and as directed. (FD-75 (M))

S&F for Seat frame of Chair Steel Tubular Without Arms made out of well seasoned hard wood (As per existing specifications) including caning as per the existing size using new plastic cane including taking down the existing unserviceable one as shown on drg and as specified and as directed. (FD-75 (M))

S&F for Back frame of Chair Steel Tubular With Arms made out of well seasoned hard wood (As per existing specifications) including caning as per the existing size using new plastic cane including taking down the existing unserviceable one as shown on drg and as specified and directed. (FD-75 (M))

S&F for Back frame of Chair Steel Tubular Without Arms made out of well seasoned hard wood (As per existing specifications) including caning as per the existing size using new plastic cane including taking down the existing unserviceable one as shown on drg and as specified and directed. (FD-75 (M))

S&F for mild steel cleat of size 40mmx20mmx3mm as per the existing size including painting camplete and taking down the existing unserviceable one as shown on drg and as specified and as directed. (FD-75 (M))

Removing of old broken drawer from existing TABLE 3'X2' WITH DRAWER and providing new steel drawer made of 1mm thick plain black steel sheet and as directed and as shown on drawing. (FD-1007/1008)

Removing and cutting out old unserviceable rusted steel parts from table 3` x 3` with and without drawer and S & F new square tube 20 Gauge all as per the existing specifications including necessary welding etc without any damges to the existing parts and making good (if any) including necessary painting with two coat of synthetic enamel paints (Olive Green) (1st grade quality) over a coat of red oxide primer complete all as specified and shown on drawing. FD-1007/1008

Removing the existing unserviceable lock from the drawer of TABLE 3'X2' WITH DRAWER/WITHOUT DRAWER and supply & fixing new brass lock with duplicate keys complete as per existing specification and as shown on drawing. (FD-1007/1008)

Removing of old/broken table top TABLE OFFICE OFFICERS STEEL and supply & fixing new table top of suitable size made out of 18mm thick pre-laminated particle board, exterior grade, one side with approved shade and balancing white lamination on other side with and including all around second class hard wood beading of 4mmx18mm size fixed with adhesive and panel pins and duly polished with a coat of high glossy french polish complete all as specified and as directed and as shown on drawing. (FD-1003/84(M))

Removing of old damage/unserviceable drawer from existing TABLE OFFICE OFFICERS STEEL and providing new steel drawer made of 1mm thick plain black steel sheet including two coat of synthetic enamel paint over a coat of red oxide primer to match with existing and as specified and as shown on drawing. (FD-1003/84(M))

Removing the existing unserviceable lock from the drawer of TABLE OFFICE OFFICERS STEEL and supply & fixing new brass lock with duplicate keys complete as per existing specifications complete all as specified and as shown on drawing. (FD-1003/84(M))

Removing of old unserviceable /broken table top of TABLE OFFICE CLERKS STEEL and supply & fixing new table top of suitable size made out of 18mm thick pre-laminated particle board exterior grade, one side with approved shade and balancing white lamination on other side with an including all around second class hard wood beading of 4mmx18mm size fixed with adhesive and panel pins and duly polish with a coat of high glossy french polish complete all as specified and as shown on drawing. (FD-1004/84(M))

Removing of old broken drawer from existing TABLE OFFICE CLERKS STEEL and providing new steel drawer made of 1mm thick plain black steel sheet including two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drawing. (FD-1003/84(M))

Removing the existing unserviceable lock from the drawer of TABLE OFFICE CLERKS STEEL and supply & fixing new brass lock with duplicate key as per the existing specification complete all as specified and as sown on drawing. (FD-1003/84(M))

M&L for removing old unserviceable Top from Table Computer and S&F new top made out of 18mm thick pre-laminated particle board exetior grade (ISI marked) one side teak face & other side balancing white with including providing 4mm thick hard wood beading fixed with fevicol/panel pin all around, complete all as specified in drg and as directed by Engr-in-Charge ( Drg No FD/E6/MAP/03)

M&L for removing old unserviceable key board tray fitted with telescopic channel from existing table computer and S&F new key board tray fitted to existing telescopic channel all as specified in drg & as directed by Engr-in-Charge. ( Drg No FD/E6/MAP/03)

S&F "L" shape hard steel joints of size 450X230mm member to be fitted in repair by welding in table computer, made out of 25 x 25mm mild steel square tube including painting complete all as specified in drg & as directed by Engr-in-Charge. ( Drg No FD/E6/MAP/03)

M&L for removing of old unserviceable/broken SIDES (Left or Right) of TABLE BED SIDE MAP and S&F new sides (Left or Right) made out 18mm thick prelaminated particle board exterior grad (ISI marked) complete all as showne in drg and directed by Engr-in-Charge (Drg No FD/E6/MAP/15 (R))

M&L for removing of old unserviceable/broken TOP of TABLE BED SIDE MAP and S&F new TOP made out 18mm thick prelaminated particle board exterior grade (ISI marked) as per existing specification complete all as showne in drg and as directed by Engr-in-Charge (Drg No FD/E6/MAP/15 (R))

Removing of old unserviceable/broken UPPER DRAWER of TABLE BED SIDE MAP and S&F new upper drawer of table bed side made out 18mm thick prelaminated particle board and ply board exterior grade (ISI marked) as per existing specification complete all as showne in drg and as directed by Engr-in-Charge. (Drg No FD/E6/MAP/15 (R))

Removing of old unserviceable/broken Lower drawer of TABLE BED SIDE MAP and S&F new lower drawer of table bed side made out 18mm thick prelaminated particle board as per existing specification exterior grade (ISI marked) as per existing specification complete all as showne in drg and as directed by Engr-in-Charge ( Drg No FD/E6/MAP/15 (R) )

Removing of old unserviceable back side of of TABLE BED SIDE MAP and S&F new back side of table bed side made out 12mm thick (7 ply) plywood (ISI Marked) (BWR grade), commercial faces both side complete all as shown in drg and as directed by Engr-in-Charge. (Drg No FD/E6/MAP/15 (R))

Removing unserviceable brass chromium plated Handle for TABLE BED SIDE MAP and S&F for new copper oxide Handle for TABLE BED SIDE MAP complete all as showne in drg and as directed by Engr-in-Charge. (Drg No FD/E6/MAP/15 (R))

Removing old unserviceable SIDE (left or right) OF TV Trolley and S&F for new SIDE OF TV Trolley made out of 18mm thick prelaminated particle board both side teak face exterior grade (ISI Marked) with shelf adhesive beading where ever required complete all as showne in drg and as directed by Engr-in-Charge. (Drg No FD/E6/MAP/04)

Removing old unserviceable TOP/BOTTOM SHELF OF TV Trolley and S&F for new TOP/BOTTOM SHELF OF TV Trolley made out of 18mm thick prelaminated particle board both side teak face exterior grade (ISI Marked) with shelf adhesive beading where ever required complete all as showne in drg and as directed by Engr-in-Charge. (Drg No FD/E6/MAP/04)

Removing old unserviceable BACK OF TV Trolley and S&F for new BACK OF TV Trolley made out of 18mm thick prelaminated particle board both side teak face exterior grade (ISI Marked) with shelf adhesive beading where ever required complete all as showne in drg and as directed by Engr-in-Charge. (Drg No FD/E6/MAP/04)

Removing old unserviceable GLASS OPENABLE SHUTTER of size 630 x 655 x 5.5mm thick with 04 Nos of Nylon washer and 02 Nos steel Hinges Godrej pattern OF TV Trolley and S&F for new GLASS OPENABLE SHUTTER of size 630 x 655 x 5.5mm thick with 04 Nos of Nylon washer and 02 Nos steel Hinges Godrej pattern OF TV Trolley complete all as showne in drg and as directed by Engr-in-Charge. (Drg No FD/E6/MAP/04)

Removing old unserviceable MAGNETIC CATCHER OF TV TROLLEY and S&F for new MAGNETIC CATCHER OF TV TROLLEY complete all as showne in drg and as directed by Engr-in-Charge (Drg No FD/E6/MAP/04)

Removing old worn out /unserviceable castor wheel from the TV Trolley without damaging the thread and S&F (New) castor wheel for the TV Trolley and tight with nut bolt and washer all as shown in drawings and as directed by the Engr-in-Charge. ( Drg No FD/E6/MAP/04 )

Removing of old/broken table top of TEAPOY VERANDAH and supply & fixing new table top of suitable size made out of 18mm thick pre-laminated particle board, exterior grade, one side with approved shade and balancing white lamination on other side with and including all around hard wood beading of 18mmx4mm size fixed with adhesive and panel pins and duly painted with a coat of white paint complete all as specified and as shown on drawing. (FD-255/208)

Removing of old/broken table top of TABLE DINING OR's STEEL and supply & fixing new table top of suitable size made out of 18mm thick pre-laminated particle board, exterior grade, one side with approved shade and balancing white lamination on other side with and including all around hard wood beading of 4mmx18mm size fixed with adhesive and panel pins and duly polished with a coat of high glossy french polish complete all as specified and as shown on drawings. (FD-165(M))

Preparation of old steel surface of TABLE DINING OR's STEEL and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint (1st Grade Quality) using spray machine complete all as specified, directed and as shown on drawings. (FD-165(M))

Taking out unserviceable broken leg form Locker steel and supply & fixing new leg made out of MS sheet 1.00mm thick suitable to locker steel & welded accordingly including two coats of painting over a coat of red oxide primer by using spray machine complete all as specified, directed and as shown on drawings. (FD-1029)

Dismantling/Taking down old unserviceable hasp and staple without damaging the adjacent parts of locker steel and supply & fixing new MS hasp & staple of suitable size complete all as specified and as shown on drawing. (FD-1029)

Taking out old unserviceable broken hinges from locker steel without damaging the adjacent parts of locker steel and supply & fixing new MS hinges of 75mm long of approved quality complete all as specified and as shown on drawing. (FD-1029)

Taking out old unserviceable broken bow type handle from locker steel without damaging the adjacent parts of locker steel and supply & fixing new steel chromium plated bow type handle of 100mm long of approved quality complete all as specified and as shown on drawing. (FD-1029)

Removing old/unserviceable nylon newar from Charpoy GI pipe and supply & weaving of charpoy GI pipe with new white colour nylon newar 50 to 55mm width of approved quality with 12 bands on short rail and 33 bands on long rail, tightly & closely wooven as per trade pattern complete all as specified and shown on drawing and directed. Note : (i) The weght of nylon newar not less than 1.5 Kgs per Charpoy (ii) The entire frame including legs shall be tightened before weaving). (Drg No. FD-220)

Taking out existing unserviceable/broken GI Check nut from Charpoy GI pipe without damaging the adjoining parts and S & F (new) Check nut, GI, 6mm thick, 32 mm bore medium grade complete as directed. (Drg No. FD-220)

Taking out existing unserviceable/broken GI 3 way elbow from Charpoy GI pipe without damaging the adjoining parts and S & F (new) GI elbow (ISI marked) 3 way 32mm bore medium grade complete as directed. (Drg No. FD-220)

Taking out existing unserviceable long rail from Charpoy GI pipe without damaging the adjoining parts and S&F (new) Long rail made from 32 mm bore GI pipe (ISI Marked), medium grade, cut to length as required making thread all as shown in drawing complete as specified and directed. (Note : Serviceable portion of long rail shall be kept in safe custody for reuse in the work as directed). (Drg No. FD-220)

Taking out existing unserviceable short rail from Charpoy GI pipe without damaging the adjoining parts and S & F new short rail made from 32 mm bore GI pipe (ISI Marked), medium grade, cut to length, making thread as required all as shown in drawing complete as specified and directed. (Note : Serviceable portion of short rails shall be kept in safe custody for reuse in the work as directed). (Drg No. FD-220)

Taking out existing unserviceable leg from Charpoy GI pipe without damaging adjoining parts and providing leg, to be made from serviceable portion of dismantled long/short rails obtained from Item No. 206 above including necessary cutting, making thread all as shown on drawing including providing wooden plug at leg end complete as specified and as directed. (Drg No. FD-220)

Removing/taking out existing unserviceable plywood top from GI Charpoy with plywood top and S & F (new) plywood top 12 mm thick (7 ply) commercial faces both side, Type BB, BWR grade as per existing size, fixed to the frame with new steel screws of appropriate size all as shown on drawings complete as specified and as directed. (Drg No. FD-220)

Taking out existing unserviceable nut and bolt from Charpoy GI pipe/steel tubular with ply top and S & F new nuts & bolts of suitable size as per the existing specifications complete all as shown on drawings and as specified and as directed. (Drg No. FD-220)

Removing/taking out carefully existing unserviceable ply wood top from Charpoy Steel Tubular with hard top and S & F (new) ply wood top 12 mm thick (7 Ply), BWR grade Type BB, with commercial face as per existing size, fixed to the frame with new steel screws of appropriate size all as shown on drawings complete as specified and as directed. (Drg No. FD/CWE/DIN/01/2010)

Modification of existing Charpoy GI (newar) as per FD-220 to hard bed with necessary arrangement & fittings as follows including tightening all the component of charpoy, removal of newar and wooden blocks at bottom of legs complete all as specified and as directed :- (i) Providing 2 Nos MS flat iron stiffeners of 840 x 35 x 5mm thick size fixed to each GI tube long rail dividing length into equal three parts by welding and drilling holes for bolts. (ii) Providing 4 Nos MS cleats made out of flat iron size 35 mm x 5 mm x 50mm long on both side of charpoy along short rails (two on head side and two on foot side) by welding & drilling holes for bolts. (iii) Providing MS plate 34mm dia, 3mm thick at bottom of legs welded properly and fixing of 3mm thick rubber sheet under MS plate using adhesive. (iv) Supply & fixing of 12mm thick (7 Ply) plywood top with commercial face, boiling water resistant (BWR) Grade and Type BB as per IS 303 : 1989, IS 1328 : 1996 and IS 848 : 2006 of size 1980 mm x 900 mm fixed over the MS cleats, MS stiffeners with chromium plated screw or bolt 8 numbers, 6mm dia and length not less than 40mm. (v) Stiffeners and cleats shall be finished with painted two coat synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of old painted iron & steel surface of Charpoy steel tubular with hard top by scraping & rubbing down with sand paper etc and removing dents and scratches if any filling the same with paste filler and painting with one coat of synthetic enamelled paint (1st Grade Quality) black using spray machine complete all as specified, directed and as shown on drawings. (Drg No. FD/CWE/DIN/01/2010)

Taking out existing unserviceable/broken PVC shoe from charpoy steel tubular with hard top and S & F new hard PVC shoe of suitable size as per the existing one of approved quality complete all as specified, directed and as shown on drawings. (Drg No. FD/CWE/DIN/01/2010)

Removing old worn out /unserviceable castor wheel from the Computer chair or Chair revolving/executive chair without damaging the thread and Supply and fixing (New) castor wheel to Computer chair/Chair revolving/executive chair and tight with nut bolt and washer all as shown in drawings and as directed by Engr-in-Charge. (Drg No. TP)

Removing old unserviceable nylone newar from chair verandah and Supply & fix for new PVC white seat of required size and pattern all as specified and as directed. (Drg No. FD-19(M)/256/FD-MAP)

Removing old unserviceable nylone newar from chair verandah and Supply & fix for new PVC white back of required size and pattern complete all as specified and as directed. (Drg No. FD-19(M)/256/FD-MAP)

M&L for running welding in repairs not exceeding 6mm thick of metal to be welded to broken steel part of all types of steel furniture including grinding complete as and where required all as as directed by the Engr-in-Charge. Note : Cost element for hire charge of T & P is deemed to be included in the unit quoted rate)

Construction House