Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC PLOT NO 361 FLAT NO 06 FIRST FLOOR SECTOR 11 HIRAN MAGRI UDAIPUR 313001 RAJ | UDAIPUR | UDAIPUR | RAJASTHAN | 313001 | L1 | Accepted-AOC being lowest | |
| 2 | L2₹9.8 L+₹46,870 (5.01%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-Finance Highest amount quoted |
Tender Value
₹9.6 L
EMD Value
₹19,200
Closing Date
21 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I UDAIPUR
ASST. GARRISON ENGINEER (I) EKLINGGARH CANTT, UDAIPUR (RAJ.) - 313001
PROVISION OF STORAGE ACCN (OLD RECORDS)
2022_MES_526330_2
8738/E8/AGE I UDAIPUR
Open Tender
Civil Works
Item Rate
120 days
ARMY AREA UDAIPUR
AS PER TENDER DOCUMENTS
5 documents required · 5 mandatory
₹500
AGE I UDAIPUR
₹19,200
Yes
2 Aug 2022
25 Jun 2022
23 Jul 2022
25 Jun 2022
21 Jul 2022
27 Jun 2022
60 days
Amount
Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil.
Excavation in trenches not exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manhole, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil.
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hadr/dense soil.
Material & Labour for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed. (Make : Chlorophyriphos or lindane emulsifiable concentrate conforming to IS : 8944 or IS-632 respectively).
Material & Labour for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and as directed. (Make : Chlorophyriphos or lindane emulsifiable concentrate conforming to IS : 8944 or IS-632 respectively).
Material & Labour for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed. (Make : Chlorophyriphos or lindane emulsifiable concentrate conforming to IS : 8944 or IS-632 respectively).
Material & Labour for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed. (Make : Chlorophyriphos or lindane emulsifiable concentrate conforming to IS : 8944 or IS-632 respectively).
Material & Labour for plain cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in foundation filling and mass concrete.
Material & Labour for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in column footings & bases for columns.
Material & Labour for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in slabs supported on columns and beams.
-Ditto-as per item No 11 but for chajjas
Material & Labour for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in beams, cantilevers, bressumers, lintels over 1.5m span.
Material & Labour for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in columns, pillars, piers, posts and struts.
Material & Labour for formwork to sides of concrete foundations, footings, bases of colmns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to battr finished rough and flat.
Material & Labour for formwork to sides of pillars, posts, sturts, piers, columns and stanchions square, rectangular or polygonal finished rough.
Material & Labour for formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilever, shelves including supports, overhangs, etc. also splays between floors and beams, etc finished rough and flat.
Material & Labour for formwork to sides and soffits of suspened slabs such as roof slabs, floor slabs, ladings and similar work, not exc. 200mm thick (horizontal or sloping) finished rough and flat.
Supply & fixing for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia
-Ditto-as per item No 19 but 6mm to 8mm dia (as in stirrups).
Material & Labour for Damp Proof Course (DPC) with 40mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregates) with water proofing compound as recommended by manufacturer and apply evenly a coat of blown bitumen grade VG-10 @ 1.5 Kg per Sqm and blended with clean sand @ 0.05 Cum/Sqm on properly cleaned surface after at least seven days of curing. Note : DPC shall be provided over full width of all internal and external walls except at openings.
Material & Labour brick work with old size fly ash bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6, complete all as specified and as directed.
Rendering 15mm thick on fair faces of concrete block masonry in cement concrete 1:4 in two layers first coat 10mm thick in Cm 1:4 and second coat 5mm thick in CM 1:4 mixed with WPC @ 3% by weight of cement and finished fair and even all as specified. Note : Water Proofing compound shall be measured & paid seperately.
Supply only Liquid water proofing compound of Make : Pidilite, Fosrock or equivalent as approved by AGE (I).
Material & Labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified.
Material & Labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces.
Material & Labour for preparation of new or prevously untreated plastered surfaces of walls and applying three coats of white wash on newly plastered wall surfaces, complete all as specified and directed.
-Ditto-as per item No 27 but on ceilings.
Material & Labour for preparation of new or prevously untreated plastered surfaces of walls and applying two coats of cement base paint , white or tinted complete all as specified and directed.
Material & Labour for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.
Material & Labour for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs :-
(a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. Make: as per APP membrane.
(b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.
(c) One layer of APP based polymeric water proofing membrane of 3mm thick and weight not less than 3.50 kg/Sqm minimum consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame as per manufacturers instruction. Make: (M/s STP Ltd / M/s Texa india Ltd / M/s IWL Ltd)
(d) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.
Supply & fixed Steel ventilators, fixed type, with glazing bars and guard bars complete. Note :- For the purpose of measurement & payment Glazing & painting shall be measured & paid separately.
Supply & fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane
Supply & fixing Steel rolling shutters (thickness of lath 1.25mm), with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and as directed by the EIC.
Material & Labour for preparation of new steel sufaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of re-oxide primer complete all as specified and as directed by the EIC.
Material & Labour for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished surface complete. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.
Material & Labour for Sand filling under floors or in foundations including watering and consolidation
Material & Labour for broken stone or boulders hardcore of gauge not exc 63mm, deposited spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface.
Material & Labour for 75mm thick cement concrete type E-2 (1:5:10) (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.
Material & Labour for 25mm thick cement concrete type B-0 under 12.5mm grade crushed stone aggregate as in sub base.
Material & Labour for Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and screed bed or bedding layer of 20mm thick in CM 1:6, complete all as specified and as directed.
Material & Labour for Machine cut kota stone (Prepolished) slab as in skirting/risers etc 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and screed bed or bedding layer of 15mm thick backing coat in CM 1:4, complete all as specified and as directed.
Material & Labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified (Make of cable: Kalinga/Havells/Anchor) for One light point / Fan/ bell point controlled by one switch.
(a) One light point controlled by one 5 Amps switch
(b) One Fan point controlled by one 5 Amps switch
(c) One socket 3 Pin 5A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size
(d ) One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size.
(e) One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size
Supply & fixing switch piano flush type single pole one way 5/6 Amps. Make : Anchor / Leader/ Kinjal.
Supply & fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd
Supply & fixing lamp holder Angle / batton type insulated body with back plate and to be fixed on PVC bock. Including dismantling old one. Make : Anchor / Leader/ Kinjal
Supply & fixing socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. Make : Anchor / Leader/ Kinjal
Supply & fixing of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge including dismantling old one. Make : Anchor / Leader / Kinjal
Supply & fixing socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one Make : Anchor / Leader /Kinjal
Supply & fixing ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one. Make : Anchor / Leader / Kinjal
Supply and Fixing LED integrated batten tube light fittings 20/22 Watt 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed.Note: LED tube lights will be issued under Sch 'B'
Material & Labour MCB SPN DB sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 8 way including dismantling old one. Make : Havells / Legrand / Schneider/Standard
Supply & fixing MCB SPN 230 Volts 40 Amps. Make : Havells/Legrand/Standard/ C&S
Supply & fixing MCB SP 230 Volts 6- 32 Amps. Make : Havells/Legrand/Standard/ C&S
Supply and fixing LED lamp 9W system lumen (NOM) 600 with all accessories all as specified and directed by Engr-in-Charge. Note: LED Bulbs will be issued under Sch 'B"
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core
Supply & fixing Submain wiring alongwith earth wire with the following sizes of 2x2.5 sqmm + 1x1.5 sqmm FR PVC insulated copper conductor, single core cable in surface/recessed as required.
Supply & fixing Submain wiring alongwith earth wire with the following sizes of 2x 4.0 sqmm + 1 x 2 .5 sqmm FR PVC insulated copper conductor, single core cable in surface/recessed as required.
M/S KAUTILYA GARG
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .