Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹51.6 L+₹1.0 L (1.99%)Rejected-Finance | L2 | Rejected-Finance higher bid value | |
| 3 | L3₹51.8 L+₹1.1 L (2.21%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L3 | Rejected-Finance higher bid value | |
| 4 | L4₹51.8 L+₹1.2 L (2.35%)Rejected-Finance | L4 | Rejected-Finance higher bid value | |
| 5 | L5₹52.3 L+₹1.6 L (3.22%)Rejected-Finance | L5 | Rejected-Finance higher bid value |
Tender Value
₹48.5 L
EMD Value
₹97,100
Closing Date
18 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok Sikkim 737102
Addn Altn and Spl repair to Offrs accn at MS 13 at Karponang under GE M Gangtok
2022_MES_525303_1
8023AE8
Open Tender
Miscellaneous Works
Item Rate
182 days
Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹97,100
Yes
9 Jul 2022
20 May 2022
20 Jun 2022
21 May 2022
18 Jun 2022
28 May 2022
60 days
Amount
B/R ITEMS Dismantling Plain or Corrugated Steel Sheeting/ Galvalume sheet of any gauge and thickness including Nainital or similar Roof Coverings, complete all as specified and as directed.
Dismantling of wall and ceiling board (fibre pulp, insulation etc.,) /AC sheets and plywood any thickness and cover fillets and removal of dismantled materials/rubbish from site complete all as specified and as directed.
Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed.
Demolition of stone or boulders masonry built in cement mortar including all quoins, arches, pillars with separating serviceable stones & setting aside for reuse in the work complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar etc complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.
Taking up or down steel tubing and connection including cleaning for re-fixing or removing from site etc complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.
Dismantling of timber in scantling 40 Sqcm and over in section in any position in unframed work complete all as specified and as directed.
Demolition of reinforced cement concrete in any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for grills, rails etc complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.
Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4) including brought upto course complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar (1:6) on fair face of brick or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 20mm thick in cement mortar (1:4) in two layer of 10mm thick each with using WPC shall be mixed with cement mortar in finishing outer layer only as per manufacturer's instruction, on other than fair face of brick/stone masonry (external surfaces) finished surface fair and even without using extra cement complete all as specified and as directed. Note : (WPC shall be measured and paid separately as supply only)
Supply only integral Water Proofing Compound, conforming to IS-2465-2003 of approved make complete all as specified and as directed.
M&L for 5mm thick in cement mortar 1:3 as in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and Labour for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate as per IS 383 exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
Material & labour for non skid coloured ceramic tiles of 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc conforming to IS- 13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed / bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed..
M&L for non-skid ceramic coloured(400x400x7 to 8mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
Materials & labour for coloured glazed ceramic tiles of size (300 mm x 200 mm / 350 mm x 250 mm / 450mm x 350mm ) x 7 mm thick as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
S&F Mild Steel Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
M&L for 35mm thick 2nd class HW plain, framed, paneled shutters (two panel) with lock rail and panel of 9mm thick BWR commerical ply or 12mm veneered particle board with commercial face veneering on both faces. The size of rail & site as per IS : 1003 (Part-I), Kiln, seasoned & chemically pressure, treated complete all as specified and as directed.
Supply & fix 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F aluminium alloy anodised sliding door bolts 250mm long with hasp staple (Bolt type) and fixing clips of sheets, cast or extruded section and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed
Supply & fix aluminium handles, 150mm size, cast type anodised complete all as specified and as directed.
S&F mild steel butt hinges of 100mm size complete all as specified and as directed.
M&L for preparation of old/new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer applied over 3mm thick super fine Birla or altek wall care putty finish including complete removal of existing treatment complete all as specified and as directed.
M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new/old plastered surfaces etc complete all as specified and directed.
M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.
M&L for preparation of new or previously untreated wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for labour for Mild steel TMT bars 6mm dia and over upto including 8mm dia as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for providing cement concrete type B0 (1:2:4) (using 12.5mm size graded aggregate) as in coping set including weathering, slightly rounded or chamfered angles & thickness complete all as specified and as directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed by the Engr-in-Charge
S&F 8/9mm thick PVC ceiling/wall panelling of interlocking types width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-jointin internal/external corner trim, corner cove, F/Jedge trims where required fixed with hidden screw to an including steel/wooden frame work of width 75mm complete all as specified and as directed.
M&L PCC 25mm thick 1:2:4 type B-0 (using 12.5mm graded stone aggregate) concrete surfaces in floors complete all as specified and as directed.
Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified & directed.
S&F of factory made solid PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing complete all as specified & directed.
S&F aluminium handles, 150mm size, cast type, anodised complete all as specified and as directed.
S&F of 100mm size mild steel butt hinges medium weight complete all as specified and as directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F in repair for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge.
S&F in repair for PVC (SWR) bends (bore of pipe 110mm) any radius fixed to PVC Pipes/Steel Gutters etc complete all as specified and as directed.
S&F sink with drainage board made of stainless steel 1.00mm thick for kitchen with plugs, washers and waste pipe, waster including cantilver CI brackets connecting union 40mm CP waste fitting and PVC waste pipe with CP PTMT fly nuts of required length pipes etc complete (overall size 915mm x 460mm with bowl size 410mmx330mmx160mm complete all as specified and as directed. Make : Nirali, Supreme or equivalent approved
Supply and fix in repairs vitreous china, white colour, flat back, wash hand basin of size 55 x 40 x 79cm fixed with brackets , including providing 32 mm dia PVC waste pipe , 32 mm bore CP waste coupling and making all necessary connections complete as directed. Make : Parryware Code No. 0471, Indus Basin(white) or equivalent approved.
Supply and fix PVC connections 15mm size with PTMT/Brass nuts of length 600mm complete all as directed by the Engr-in-Charge. Make Prayag or equivalent make approved.
Supply and fix in repairs 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as specified. Make : Cera Cat No. B1010101 or equivalent of approved make.
Supply & fix in repairs Bib tap , long body cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one. Make : JAQUAR Code : CON-107 KN or equivalent of approved make.
S&F in repairs CP basin mixer, single lever without popuo waste with 450mm long braided hose etc complete all as specified and as directed.
S&F in repairs CP wall mixer, single lever without popuo waste with 450mm longh braided hose et complete all as specified and as directed.
Supply & fix fancy type angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed by the Engr-in-Charge. Make: Essco Cat Part No DLX-ESS 526 or equivalent.
Supply and fixing white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 570 x 460 x 380 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed. Make Cera Cat No. S1050106 S Trap Cat no.B1510120 Ceraanglo deluxe seat cover or equivalent of approved make.
S&F for PVC(SWR) vent cowl fixed to PVC pipes etc (Bore of pipe 110mm) complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.
M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds mitered/stopped ends etc complete all as specified and as directed.
M&L for 15mm steel tubing medium grade, galvanised fitting fixed complete to walls and ceiling or floor complete all as specified and as directed.
S&F in repairs of factory made steel ventilator with top hung shutter including friction/box type hinges, steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and as directed.
M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slab, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Form work to sides and soffit of beams, lintels,shelves of slabs/beams and similar works including supports, over hangs etc rough finished surfaces of concrete,flat complete all as specified and as directed.
Material and labour for 2nd class hard wood fillets, square, rectangular and triangular in section, wrought, secured with nails,sectional area exe 3 Sqcm but n.exc 6 Sqcm in section complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood & wood based materials over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M&L for 2nd class hard wood in scantling fixed in clean sawn complete all as specified and as directed.
All as per item No. 69 above but except timber scantling.
M&L RCC nominal mix using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under- reamed piles and mass concrete complete all as specified and as directed.
Formwork to sides of concrete foundation, footings, bases of columns, raft & raft beams, sides & soffits (if any) of foundation & similar works vertifical of to batter, rough finished surfaces of concrete flat complete all as specified and as directed.
S&F aluminium powder coated fancy curtain rails inlcuding brackets (max length of each curtain rod 1.5m) plain or colour 20 to 25mm dia as approved with teak wood finishing brackets and knobs complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection/path /hardstanding finished cement concrete surfaces fair and even complete all as specified and as directed.
S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows complete all as specified and as directed.
S&F 4mm thick PVC acrylic sheet, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane.
Hacking out old broken glass (any thickness , size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips and removal from the site complete all as directed by the Engr-in-charge.
E/M Portion Taking down copper/aluminium point wiring (light, fan, socket or power) complete, inlcuding fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC rigid non matellic casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3 mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and directed.
All as per item No. 79 above but one light point controlled by one switch 5/6 Amps
All as per item No. 79 above but one exhaust fan point controlled by one switch 5/6 Amps
All as per item No. 79 above but one switch socket outlet point 5/6 Amps on independent board.
All as per item No. 79 above but one call bell/buzzer point controlled by one bell push.
All as per item No. 79 above but for one socket outlet of 15 Amps fixed on independent board with 4 Sqmm multistranded copper conductor wire FRLS PVC insulated and 4 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed.
S&F in repairs switch piano flush button,single pole,one way(ISI marked), 6 amps complete all as specified and as directed. Make : Anchor product code No. 50053 or equivalent of approved make
S&F in repair ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and directed Make : Anchor Product Code No 39040 or equivalent of approved make
S&F in repairs switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed including taking down old one. Make : Anchor Product Code No 4056/50483 or equivalent of approved make
S&F in repairs switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete complete all as directed including taking down old one. Make : Anchor Cat No 38808/50665 or equivalent of approved make
S&F in repairs bell push, flush type, 6 amps, 240 volts ISI marked all as specified and directed. Make : Anchor Product Code No 50075 or equivalent of approved make
S&F in repairs bell ding dong, AC single pole 220/240 volts white/ivory finish, surface type complete all as specified and directed. Make : Anchor Product Code No 8272 or equivalent of approved make
S&F in repairs lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as directed. Make : Anchor Product Code No 39527 or equivalent of approved make
S&F 250mm sweep exhaust fan PVC body model, 240 volts, AC 50 Hz, with all accessories such as louvers, three core single core PVC insulated copper conductor of size 0.5 Sqmm from ceiling rose to fan, including cutting and fixing of fan and finishing the cutting surfaces even and smooth as per existing compelte all as specified and as directed.
S&F decorative LED tube light fitting 1x18 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F LED light fitting 1x9W/1x10W bulk head luminaries inlcuding LED light driver holder connecting conneting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F in repairs sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way with 200 Amps rated copper bus bar double door type complete and including taking down old DB with MCB complete all as specified and as directed.vells/ABB/Legrand) (Make : L&T cat No DBSPN008DD or equivalent of approved make)
S&F in repairs MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB20400C to BB20630C or equivalent of approved make)
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB10060C to BB10320C or equivalent of approved make)
M&L for concealed submain wiring alongwith earth wire of size 2x6.0 Sqmm + 1x6 Sqmm earth wire ISI marked FRLS PVC insulated multi stranded copper conductor single core cable drawn in and incl PVC casing and caping of adequate size with all accessories as required as specified and as directed incl taking down old unserviceable submain wiring. (Note : Three runs of PVC wire with one run of PVC casing and caping will be measured and paid as one length.)
Supply, install, testing & commissioning of electric water heater, storage vertical type, 4 star rates, 25 Ltr capacity comprising of high wattage heating element for instant heating, extra thick inner tank of superior grade, rust & shock proof ABS outer body, non-ferrous peressure plate with & incl provn of 04 Nos grouting bolts suitably flushed to wall or any surface incl water & electric connection with 3 core PVC insulated, sheathed, standed copper conductor cable/flexible chord complete all as specified and as directed. Make : Havells Cat No. GHWAMGTWH025 or equivalent approved.
Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected with galvanised iron/steel earth wire of 4mm dia by means of bolts, nuts, check nuts and washers made outof galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to VTPN DB/SPN DB including neccessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2;4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia MS bars etc complete all as specified and as directed including testing on completion.
BIJAY MITTAL
M/S S. S CHETTRI AND SONS
KAMLESH ENTERPRISE
M/S ANIL KUMAR THAKUR
KARMA TSETEN BHUTIA
DHARMINDER SINGH
MAHENDRA KHAWAS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .