REPAIR, MAINT TO ROAD FURNITURE AND OTHER ALLIED ROAD WORKS AT MIC AND S UNDER GE (S) AHILYANAGAR

Dismantling kota, granite, cudappah stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortor complete all as specified and as directed.

Demoltion of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified & directed.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of floor all as specified and as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including dismantling of existing kerb stone and making drainage opening wherever required complete all as specified and as directed.

Fixing only cement concrete paver block as in footpath,parks, lawns, drive ways or light traffic parking etc., over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. Note: Old Cement Concrete Paver Blocks of any type and size retrived from dismantling shall be reused under this item.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Supply and fixing in repair cat eye solar reflective type of size 100mm x 100mm x 18.5mm with PAMA striplens relector fixed with and incl MS stud of suitable size as per manufacturers instructions. Make : DA 978 of Darkeye or equivalent model of makes specified.

S&F for road side convex mirror for road safety with installation kit & adjustable fixing bracket (nuts & Bolts), ISO Certified 9001:2015, of size 800mm dia, made up of polycabronate, mounted on MS pipe of 2.1m long and dia of pipe is 80mm including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earthwork in any type of soil for fixing and embedding the MS pipe on ground with hold fasting using PCC (1:2:4) type B1 using 20mm graded aggregates (block size 0.3m x 0.3 m x 0.45m below GL) and proper grounting, complete all as specified and directed by the Engr-in-Charge.

S&F for road side unbreakable convex mirror / security mirror/ traffic mirror for road safety with installation kit & adjustable fixing bracket (nuts & Bolts), ISO Certified 9001:2015, of size 600mm dia, made up of polycabronate, mounted on MS pipe of 2.1m long and dia of pipe is 80mm including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earthwork in any type of soil for fixing and embedding the MS pipe on ground with hold fasting using PCC (1:2:4) type B1 using 20mm graded aggregates (block size 0.3m x 0.3 m x 0.45m below GL) and proper grouting, complete all as specified and directed by the Engr-in-Charge.

Supply and fix in repairs solar cat eye alumnium alloy shall (100% water proofing design according to IP67) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono Crystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed. Make : DA 110 (DHRUV) of Darkeye or equivalent model of makes specified.