Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹81.1 LAccepted-Finance | 1 | Accepted-Finance corrrect document uploaded | |
| 2 | 2₹93.3 L+₹12.2 L (15.1%)Accepted-Finance | 2 | Accepted-Finance corrrect document uploaded | |
| 3 | 3₹99.9 L+₹18.8 L (23.2%)Accepted-Finance | 3 | Accepted-Finance corrrect document uploaded | |
| 4 | 4₹1.0 Cr+₹23.2 L (28.6%)Accepted-Finance | 4 | Accepted-Finance corrrect document uploaded | |
| 5 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹1.8 L
Closing Date
12 Dec 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PA KOYA
Executive Engineer LPWD Division Amini
Construction of Police Station Building at Chetlat GF and FF
2022_UTL_2005_1
17/EE/LPWD/AMINI/2022-23
Open Tender
Civil Works - Buildings
Item Rate
365 days
Chetlath
Please refer agreement document
7 documents required · 7 mandatory
₹1,000
EXECUTIVE ENGINEER LPWD AMINI
₹1.8 L
14 Dec 2022
2 Dec 2022
13 Dec 2022
2 Dec 2022
12 Dec 2022
2 Dec 2022
Amount
Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50 metres and lift up to 1.5 metres
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc layers not exceeding 20cm plinth sides of foundations etc layers not exceeding 20cm and watering lead up to 50 mtr and lift up to 1.5 metres
Providing and laying cement concrete 1: 4:8 (1 cement: 4 M.Sand: 8 Stone aggregate 20mm nomonal size) foundation and plinth.
Providing and laying cement concrete 1: 5:10 ( 1 cement: 5 M.Sand: 10 Stone aggregate 20 mm nomonal size) foundation and plinth.
Providing and laying DPC 40 mm in cement concrete 1: 2 :4 ( 1 cement: 2 M.Sand: 4 granite chips 20mm nominal size).
Reinforced cement concrete 1:1.5:3 ( 1 cement: 1.5 M.Sand: 3 granite chips 20mm nominal size) excluding cost of centring and shuttering and reinforcement All work up toplinth level. Foundation fooltings bases of column etc, and mass concrete.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcement :1:1:2 (1 cement: 1 M sand : 2 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in beams, Suspended floors ofs,having slope up to 15 degree landings, shelves chajjas, lintels ,bands,plain window sills,staircase and spiral stair case up to floor five level excluding cost of centering and shuttering finishing and reinforcement.with 1:1.5:3 ( 1 cemet :1.5 M sand:3 graded stone aggregate 20 mm nominal size.
Cold twisted steel reinforcement for R.C.C. work including bending, binding and placing in position complete.
Providing and fixing precast cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4 graded stone aggregate 20mm nominal size) set in position with cement mortar 1:2 (1 cement :2 fine sand) and finished smooth with 6mm thick cement plaster 1:3 (1 cement :3 fine sand) on xposed surfaces including centering and shuttering in String courses, copings, bed plates anchor blocks, plain window sills and the like
Centring and shuttering including strutting, propping etc. and removal of form work for:
Suspended floors, roofs, landings, balconies and access platform.
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Columns, Pillars, Piers, Abutments, Posts and Struts.
Foundations, footings, bases of columns, etc. for mass concrete.
Stairs, (excluding landings) except spiral-staircases.
Brick work with modular bricks of class designation in foundation and plinth in C.M.1:6 (1Cement: 6 Metal sand).
Brick work in super structure above plinth level upto floor five level in C.M.1:6 (1Cement: 6 Metal sand).
Half brick masonry in super structure above plinth level upto floor five level cement mortar 1:4 (1 cement 4 Metal sand)
Providing wood work in frames of doors, windows, clerestory indows and other frames wrought, framed and fixed in position 2nd class Teak wood (hold fast lugs or dasg fastener shall be paid for separately)
Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. 2nd class Teak wood ( Double leef shettre) with glass panes 4mm thick.
Providing and fixing Flush door shutters confirming to IS:2202 (part.I) decorative type,core of block board construction frame of first cladd hard wood and well matched firdt class teak 3 ply veneering with vertical grains or cross band s and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless steel butt hinges with necessary screws.
Providing and fixing 2nd class Teak wood 25 mm squre wooden bars at required spacing in wooden frames of windows and clerestory windows.
Providing 40 x5 mm Iron hold fast 40 cm long including fixingto frames with 10 mm dia bolts nuts, wooden plugs and embedding in cement concrete block of size 30 x10 x15 cm of mix 1:3:6 (1 cement : 3 M.sand : 6 graded stone agrigate of 20 mm nominal size).
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842 - 2000, including top cover of 6 mm coir veneer board, nickel plated M.S. Pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. Flat 10 cm long and rawl plug 50 mm long (designation 10 No.) etc., all complete.
Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 300x16 mm each.
Providing and fixing anodised Aluminium tower bolt (barral type) anodised transparent or dyed to required color and shade with bolts, nuts and screws etc complete.
Providing and fixing anodised Aluminium handle anodised transparent or dyed to required color and shade with bolts nuts and screws etc complete.
Providing and fixing Bright finished brass casement stay with necessary screws. 250 mm weighing not less than 280 gms
Providing and fixing Bright finished brass door stoper with rubber cusion & necessary screws.
Providing and fixing Bright finished brass Hydraulic door closer with necessary fittings &screws.
Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock ail made up of’H’ section, a UPVC hollow section of size 100x24 mm and 2 mm ± r 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.
Providing and fixing stainless steel ( Grade316) railing made of Hollow tubes,channels,plates etc...including welding grinding, buffing, polishing and making curvature( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steelbolts etc... of required size,on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts,fasteners etc..).
Steel work welded in built up section/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usin’g structural steel etc. as required. In grating, frames, guard bar, ladder railings, brackets, gates and similar works.
Cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of noising of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate
Providing and fixing 8 mm thick 1st quality ceramic glazed wall tiles of size 300x300mm confirming to IS:15622 of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, risers of steps and dado over 12mm thick cement mortar 1:3 (1cement, 3 M sand ) and joining with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing 8 mm thick 1st quality ceramic glazed floor tiles (Anti skid) of size 300x300mm confirming to IS:15622 of approved make, in colours such as White, ivory, Grey, Fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement, 4 M sand) and joining with white cement and matching pigment etc. complete.
Providing and laying 10 mm thick Mat finished vitrifid floor tiles (premium quality) in diffren sizes with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, laid 20mm thick cement mortar 1:4 (1 cement 4 M. sand) including grouting the joints with white cement and matching pigments etc.. complete. Size 800x800mm ( flooring).
Providing and laying 10 mm thick Mat finished vitrified tiles (premium qualit) in diffrent sizes with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement 3 M. Sand) including grouting the joints with white cement and matching pigments etc.. complete. Skirting, risers of steps etc. 800x800 mm.
6mm cement plaster to ceiling 1:3 (1 cement : 3 M-sand).
12mm cement plaster 1:6 (1 cement : 6 M-sand)
15mm cement plaster 1:6 (1 cement : 6 M-sand) on rough side of single or half brick wall.
Finishing with Deluxe Multi surface paint system for interiors and xteriors using primer as per manufactures specifications two or more coats applied on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm.
Painting Wood work with Deluxe Multi surface paintto give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture.
Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
Providing and fixing C.P. Brass bib cock of approved quality and manufacture complete.
15 mm nominal bore
20 mm nominal bore
Providing and fixing 15 mm nominal bore C.P. Brass stop cock of approved quality and manufacture complete.
Providing and fixing 32 mm nominal bore G.M. full way wheel valve of approved quality and manufacture complete.
Providing and placing sintex tank on terrace ( at floor level ) polythene water storage tank ISI : 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and over flow pipe but without fittings and the base support for tank. 500 liter capacity
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,).
15 mm nominal outer dia .Pipes
20 mm nominal outer dia .Pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work).
15 mm nominal outer dia .Pipes
32 mm nominal outer dia .Pipes.
Providing anf fixing white vitrous China water closet Pedestal pan European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making ood the walls and floors where required. White EWC pan with plastic seat and lid
Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap.
Providing anf fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers.
Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail brackets with total length of 645 mm,width 78mm and effective height of 88 mm ,weighing not less than 190gms.
Providing and Fixing PTMT liquid soap container109 mm wide,125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms.
Providing anf fixing on wall face PVC. soil waste and vent pipe 75mm dia pipes.
Providing and Fixing Stainless steel toilet paper holder in the cavity of wall with screws and washers superior quality of approved brand and manufacture.
Providing, laying and P.V.C pipes grade "A" with stiff mixture of 1:3 (1 cemenr 3 metal sand) including testing of joints etc. complete. 110mm diametre
Mohammed Basheer Ahamed CH
ALI ENGINEERING CONTRACTORS
SAINA BUILDERS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .