Construction of cement concrete drain at ITHP Zakura (Balance Work)

Silt clearance from canals inclusive of initial lead and lift (50m & 1.5m respectively) (Wet/muddy materials)

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

Providing form work including Centring, shuttering , strutting, propping etc. using ply wood sheeting with water proofing ply board and removal of the same for (All works at all levels complete.). -Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

15mm Cement plaster on the rough side of single or half brick wall of mix 1:4 ( 1 cement: 4 fine sand)

Dewatering / pumping out of water caused by springs, tidal or river seepage, broken water mains or drains and the like.

P/F of angle iron and flat including cutting, fixing, welding & coat of red oxide & paint all complete job

Supply of 120-liter [ Wheel Garbage Waste Dustbin], the commonly available WB120L outdoor model with following practical specifications: Capacity120 Liters Material / Plastic Origin Virgin HDPE (High Density Polyethylene), injection molded Thickness120L HDPE bins generally use ~3–4 mm wall thickness for heavy-duty outdoor use UV / Sunlight Exposure UV stabilized and sunlight resistant; designed for prolonged outdoor exposure without rapid degradation Dimensions Approx. 92 × 48 × 55 cm (H × W × D) Weight Around 8–10 kg depending on batch/model Shape Rectangular wheeled bin with hinged lid and tapered body Wheels Two solid/rubberized wheels for mobility Surface Finish Smooth molded plastic for easy cleaning Temperature Resistance Suitable for low and high outdoor temperatures Chemical Resistance Resistant to common acids and chemicals Available Colors Green, Blue, Red, Yellow, Black Drain Mechanism Usually no factory drain tap in standard 120L WB120L model; manual tilting/emptying required Lid Type Hinged top lid with handle Manufacturing One-piece injection molded body with minimal jointsall-weather HDPE body