Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹22.6 L
Closing Date
20 Jun 2026, 2:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
66 days
Expenditure
Capital (RSP)
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N OR 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- "Interior Furnishing of Coaches (ICF/LHB)/Metro Railway Coaches / Inspection Carriage (Administrative) / Observation Car, etc. 'Interior Furnishing' would mean the following activities: Complete Flooring or Wall Paneling or ceiling Paneling or Seats and Berths Fitment along with Compartment Fittings, etc. or Lavatory Fittings (Viz., Lavatory Doors, Lavatory Pan, Wash Basin, Plumbing, Fitting, etc.) in Coaches as per applicability in respective Coach Design". Any one or more of the above work executed in any unit of Indian Railway or PUs or Central/State Government Establishments or Public listed Company/Trusts having average annual turnover of Rs.500 Crores and above will be considered."
116 conditions · 9 needing a document upload
Contractor must ensure that all documents as per Check list attached in Document Section has been uploaded and complied in accordance to GCC or not, if applicable and the same should be uploaded along with the Offer duly signed by the bidder.
The works are required to be completed within the specified period in NIT HEADER from the date of issue of acceptance letter.
Rights Of The Railway To Deal With Tender: The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender and no tenderer(s) shall demand any explanation for the cause of rejection of his/their tender nor the Railway to assign reasons for declining to consider or reject any particular tender or tenders.
If the tenderer(s) deliberately gives / give wrong information in his / their tender or creates / create circumstances for the acceptance of his / their tender, the Railway reserves the right to reject such tender at any stage.
Documents testifying tenderer previous experience and financial status should be produced along with the tender. Tenderer(s) who is / are not borne on the approved list of the Contractors of Indian Railway shall submit along with his / their tender: (i) Certificates and testimonials regarding contracting experience for the type of job for which tender is invited with list of works carried out in the past. (ii) Audited Balance Sheet duly certified by the Chartered Accountant regarding contractual payments received in the past. (iii) The list of personnel / organization on hand and proposed to be engaged for the tendered work. Similarly list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (iv) A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm, Annexure -V(A) shall also be submitted by the each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. as the case may be. Non submission of Annexure -V (A) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested / digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
BOOK OF REFERENCE: General Conditions of Contract, 2022, hereinafter mentioned as GCC 2022, of Indian Railways. There will be an overall binding of Indian Railways; General Conditions of Contract, 2022; hereinafter or elsewhere mentioned as GCC, 2022 amended/revised/ modified/corrected/updated from time to time, irrespective of before or after opening of this e-tender, upon the tender or contract.
Tenderer/Bidder must upload all the necessary document in proper format as mentioned in GCC or latest.
At the time of submission of bid, if you have any special condition then upload in scanned PDF copy. However , The Railway shall have the right to incorporate any such condition quoted by Tenderer, in the contract, at its discretion.
Electronic tender box will be opened after the closing time as shown in the NIT/IREPS website, as per procedure. Tenderers shall not be required to be present in the Office of Dy. Chief Mechanical Engineer (LHB)/Liluah for any e-Tender opening process. They can obtain totally transparent Bid Tabulation Statement by logging in IREPS website after tender opening. All the participating tenderers who will submit valid e-Tender offer can view their own offer details as well as tender tabulation statement after tender opening from any location using internet access by visiting the website: www.ireps.gov.in instantly after opening of the electronic tender box, by clicking on the icon. Railways do not guarantee opening of the tender on or after the specified date and time due to reasons beyond control of the Railway Administration. Hence the e-Tender can be opened after the specified due date and time also. It will, however, be ensured that no offer is submitted after the specified date and time for the subject e-Tender. Tenderers cannot submit/modify any offer or attach any file to it after the closing date and time as stipulated in the e-Tender Notice. IREPS does not permit any alteration, modification, deletion of any entry or condition offered by the tenderer in the e-Tender, after closure of the electronic tender box.
The Tenderer will have to upload necessary authenticated and proper document in respect of the above, along with Tender Offer; to comply the respective condition of GCC, 2022 or latest to its last amendment in respect of Nature of the firm: Sole proprietorship firm, or, Partnership Firm, or Joint Venture Firm, or Company registered under Companies Act 1956, or a Society. In this regard, Railway Board letter No. 2013/CE-I/CT/O/33/SI (FTS- 89623) dated 11.10.2014 may be referred to, which is furnished in the Document Section.
The Contractor should provide dress/uniform of Light blue shirt, Badge containing Logo / Name of Firm on Pocket, Navy Blue Trouser, Yellow Helmet, Industrial Shoe, PVC gloves / Leather gloves to the Contractor Labourers working under them during this work in workshop Premises such that they are clearly identified and it is mandatory to wear this uniform, otherwise no contractual staff shall be allowed to work in Liluah Workshop premises without wearing the above uniform.
Vide Railway Board letter No. 2018/E(LL)/AT/CNR/3 dated 24.01.2018, every contractor must abide by and ensure compliance to statutory provisions of applicable Labour Laws and various Labour Legislations, as applicable, when they are engaging workmen for execution of Works Contracts awarded by Railways. Details of the above are clearly mentioned in the said letter of Railway Board; copy of which can be seen in the Document Section of this Tender. ;Successful Bidder/tenderer; or ;Contractors; shall have to submit an Undertaking stating that they shall abide by the above instructions meticulously, to pay the Minimum Wages and others facilities as per provisions of the above Labour Legislations/Laws; and in case of any deviation/non-compliance in respect of above laws/legislations; or any complaint is received to that effect, the Contractor will be solely responsible and Railway will take up necessary punitive/penal proceedings under relevant laws against the default/accused Contractor in consultation with Labour Authorities and black list them nationally. All bidders are once again advised to take a serious note of these issues and follow the instruction laid in the said letter of Railway Board thoroughly, both in letter and spirit. Copy of the said latter of Railway Board is furnished at the Document Section.
System of Verification of Tenderers Credential:
For the works tenders, it has been decided to adopt Self-Declaration based system of credential verification. The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfil the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderers shall be self-attested/digitally signed by the tenderer or authorised representative of the tendering firm. Self-attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "Documents supporting the claim of qualifying the laid down criteria", will be considered for evaluating his/their tender. The system shall be applicable once it is made operational in IREPS. This system is already being followed by some of Railway PSUs.
In all works tender documents, following para may be added in the section describing the qualification and eligibility criteria. "The tenderers shall submit a self- declaration stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. It shall be incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. It will not be obligatory on the part of Tender Committee to scrutinise beyond the submitted document of tenderer as far as his qualification for the tender is concerned." With the submission of the self-declaration the practice of verification of tenderer's documents by the Railways may be dispensed with. Following clause may also be added to the Instructions to Bidders.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be 14.2.1 necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway thereunder.
In case of any wrong information submitted by tenderer, the contract shall be terminated, 14.2.2 Bid Security, Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 2 (Two) years.
Tenderer should avoid uploading same pages for more than one occasions and Unnecessary Documents.
The contractor has to provide ID Cards which are to be countersigned by Workshop Security Authority for the staffs working under them.
Police Verification of Antecedents of Contractual Staff as per DG/RPF letter No. DO No. 2020/Sec(CCB)/45/50/Misc dt. 29.01.2020 (Letter uploaded in Document Section).
Tenderer have to cautious regarding the engagement of Labour about the subject work. As per Railway Board letter No. 2019/sec.(Int.)/51/7/2-23 New Delhi, dt:16.08.2020 & IGCum-PCSC/RPF/ER's letter no. SC.20/43/45/Order Circular/2021 dt:23.08.2021, Contractor should not engage any Bangladeshi, Rohingyas or any other foreigner in India as a worker during the execution of work. If any worker found during the execution of work, the contractor will solely be responsible and action will be taken as per extent rule.
Contractors are advised to take necessary steps for police verification of all the engaged contractual staff as per Sr. Divisional Security Commissioner(Cord) RPF/E.R/LLH letter No: HWH/CR-Order & Circulars/2022 dt:15.10.2022.
Police Verification of Contractual Staff: Police Verification of Antecedents of Contractual Staff as per DG/RPF letter No. DO No. 2020/Sec(CCB)/45/50/Misc dt. 29.01.2020. (i) Contractor have to cautious regarding the engagement of Labour about the subject work. As per Railway Board letter No. 2019/sec.(Int.)/51/7/2-23 New Delhi, dt:16.08.2020 & IGCum-PCSC/RPF/ER's letter no. SC.20/43/45/Order Circular/2021 dt:23.08.2021, Contractor should not engage any Bangladeshi, Rohingyas or any other foreigner in India as a worker during the execution of work. If any worker found during the execution of work, the contractor will solely be responsible and action will be taken as per extant rule. (ii) The contractor has to provide ID Cards which are to be countersigned by Workshop Security Authority for the staffs working under them. (iii) 100% police verification of contractual staff engaged to work in workshop premises for execution of the proposed outsourced work should be ensured vide Sr. DSC(Cord)/RPF/ER/HOWRAH's letter no. HWH/CR-Order & Circulars/2022 dtd.15.10.2022. Individuals can now submit applications for Police Verification through the online portal digitalpolice.gov.in, where police verification reports are generated following the standard procedure by the respective police authorities.
The contractor must have to collet Form-III from the nominated office of LLH workshop & then it has to submit Labour commissioner office as per requirement of engaged manpower.
As per IR GCC, 2022; e-Tender Forms shall be issued free of cost to all Tenderers.
Complete refurbishment of interiors for RA Coaches as per Scope of Work.
LRC-3_CT_RA-17-RSP_R
LRC-3_CT_RA-17-RSP_R
Open
Works - General
36 Months
Howrah, West Bengal
₹0
₹22.6 L
20 Jun 2026
15 May 2026
23 May 2026
290 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 8,61,14,256.31 | ||
| — | 40800.00 | — | — | ||
| Supply and Fitment of Inside wall panel, False Ceiling with ply board of 12 mm and Wood finish Veneer and polishing (Ply Make/Brand Globe/Austin/lndply or Similar, Sunmica - Thickness 1.1 mm, Make/Brand-Merino/Kajaria/Austin Or Similar, Adhesive- Make/Brand -Fevicol )including Folding Table. | — | — | — | 3,83,41,800 | |
| — | 10030.00 | — | — | ||
| Supply and Fitment of Wooden Flooring (Make Deco or similar) with beats & moulding. | — | — | — | 11,37,402 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of Inspection Table in 3 Part with Folding arrangement Size : 98" x 18" with thickness 22 mm | — | — | — | 2,49,900 | |
| — | 544.00 | — | — | ||
| Supply and Fitment of Roller Blind make nexdigitron or similar, Size : 8ftx4ft | — | — | — | 60,547.2 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of 'L' Type wood polished Sofa 5'-5" x 4' x 18". | — | — | — | 8,03,250 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Teak wood polished Cots of Size : 1980 mm x 915mm x 450 mm with Head Rest; along with supply of Mattress, size 1980 x 915 mm. | — | — | — | 8,03,250 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of Teak wood polished Reading Table Size : 30 Inch x 18 Inch. | — | — | — | 92,820 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of Teak wood polished Side Table Size : 12 Inch x 12 Inch x 24 Inch. | — | — | — | 53,550 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of Teak wood polished Tea Table with Glass Top Size : 46 Inch x 30 Inch x 20 Inch. | — | — | — | 3,03,450 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Teak wood polished Two door Wardrobe of Size : 1800mm x 450mm | — | — | — | 4,99,800 | |
| — | 51.00 | — | — | ||
| Supply and Fitment of Wooden Stool of Size : 30" x 12" x 12" | — | — | — | 1,71,360 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Teak wood polished Dressing Table of Size : 900 mm x 450mm x 600 mm Mirror with Wooden Frame of Size : 600 mm x 900 mm | — | — | — | 8,03,250 | |
| — | 51.00 | — | — | ||
| Supply and Fitment of Sliding Door (both sides) veneer finished with locking arrangement | — | — | — | 5,89,050 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Backline Ceramic One Piece Water Closet 'S' type western style Commode with cover make Jaquar or similar. | — | — | — | 10,71,000 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Ceramic Pedestal Wash Basin with quarter turn Pillar Cock, make Jaquar or similar. | — | — | — | 4,99,800 | |
| — | 1360.00 | — | — | ||
| Supply and Fitment of Anti skid Tiles Flooring at Lavatories. | — | — | — | 2,85,600 | |
| — | 6732.00 | — | — | ||
| Supply and Fitment of Wall Tiles up-to Ceiling from floor and Wall tiles at Kitchen Area | — | — | — | 10,60,290 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Good quality of fancy Mirror Size: 600 mm x 450 mm. | — | — | — | 32,130 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Hot & cold mixture cock with telephonic Hand Shower. Make Jaquar or similar. | — | — | — | 1,42,800 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of SS Bib Cock with health faucet Make Jaquar or similar. | — | — | — | 1,42,800 | |
| — | 68.00 | — | — | ||
| Supply and Fitment of Hot and Cold Water Mixer for basin Make Jaquar or similar. | — | — | — | 2,78,460 | |
| — | 68.00 | — | — | ||
| Supply and Fitment of Lav door with all fittings, door closer, handle etc. | — | — | — | 6,42,600 | |
| — | 51.00 | — | — | ||
| Supply and Fitment of Communication door with frosted glass (both side veneer finish), door closer with all fittings | — | — | — | 5,35,500 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of Western style Commode with cover make Hindusthan or similar. | — | — | — | 91,035 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of Health Faucet with Tap make Jaquar or Similar. | — | — | — | 21,420 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of SS Bib Cock (Long body) for Kitchen Sink Make Jaquar or similar. | — | — | — | 37,485 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of Wall mounted Wash Basin with all fittings & pillar cock | — | — | — | 1,07,100 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of HD Ready Smart LED Google TV with Alexa Compatibility. Size : 32 (80 inch) make Sony or Similar. | — | — | — | 2,67,750 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of SS Wash Basin (size: 18" x 18")with Quarter Turn Pillar Cock make Hindusthan or similar. | — | — | — | 89,250 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of Toaster make Bajaj or similar. | — | — | — | 39,270 | |
| — | 17.00 | — | — | ||
| Supply and Fitment of RO Water Purifier make Kent or Similar. | — | — | — | 2,67,750 | |
| — | 510.00 | — | — | ||
| Supply and Fitment of space for Extra Storage make LG or similar. | — | — | — | 4,28,400 | |
| — | 8330.00 | — | — | ||
| Supply and Fitment of Inside wall panel, False Ceiling with ply Board of 12 mm and Sunmica (Ply Make/Brand - Globe/Austin/lndply or Similar, Sunmica - Thickness 1.1 mm, Make/Brand-Merino/Kajaria/ Austin or Similar, Adhesive- Make/Brand-Fevicol ) | — | — | — | 77,84,385 | |
| — | 51.00 | — | — | ||
| Supply and Fitment of SS Stool. | — | — | — | 80,325 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Mirror Shelf ( Acrylic) | — | — | — | 42,840 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Glass Soap Dish. | — | — | — | 14,280 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Fancy Liquid Soap Dispenser. | — | — | — | 28,560 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Tissue Paper (Toilet paper) Holder. | — | — | — | 53,550 | |
| — | 85.00 | — | — | ||
| Supply and Fitment of Angular (CP) Stop Cock. | — | — | — | 80,325 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Towel Rack. | — | — | — | 21,384.3 | |
| — | 51.00 | — | — | ||
| Supply and Fitment of 3-leg Coat Hook (Brass) | — | — | — | 16,065 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of Odonil Container. | — | — | — | 10,710 | |
| — | 34.00 | — | — | ||
| Supply and Fitment of SS Grab Handle 12" for lavatory. | — | — | — | 28,560 | |
| — | 136.00 | — | — | ||
| Supply and Fitment of Fancy bottle holder | — | — | — | 42,840 | |
| — | 51.00 | — | — | ||
| Supply and Fitment of Plumbing of all lavatories & kitchen with all fittings. | — | — | — | 4,81,950 | |
| — | 17.00 | — | — | ||
| Supply and Installation of S S Modular Kitchen AISI-202 Grade SS; Size: 565 x (1040+800/ +50) x 0.8 mm with sink , 3 Nos. Drawer with 16 mm (Approx ) Granite Top. Front will be PU Coated aesthetic colour. | — | — | — | 44,54,824.5 | |
| — | 17.00 | — | — | ||
| Supply, installation and commissioning of on board display system with recording facility at OMS inspection car as per annexure as follows:- a) IP IR BULLET Camera with 1/2. 8" Progressive Scan CMOS, Minimum illumination: Colour: 0.028 Lux, Maximum illumination: 1920x 1080, Lens: Fixed Lens, 4 mm, Weather proof, IR range 30 meter, Field of View: 89 degree, Vertical FOV:47 degree, diagonal FOV: 107 degree, Ingress Protection: IP-67, Qty: 01 No. , Make-Hlkvision or similar. b) Channel Network video Recorder with 1 TB Survelliance HDD, Qty-01 No. Make-Hlkvision or similar. c) Supply of 4 Port Gigabit Ethernet POE Switch, Qty:- 01 No. Make-Digisol, Airpro or Similar. d) Supply of 32 " LED Display unit, Qty-01 no. Make: Panasonic, Videocon or similar. e) Installation, Testing & Commissioning with all Accessories. | — | — | — | 8,02,141.43 | |
| — | 7.00 | — | — | ||
| Supply of Aluminium Aviation Trolley Spec: Material: Aluminium, L-810 mm x W-330 mm x H-1020 mm, 4 Nos. wheels, 12 Slots. Temp Range:20 to 80 Degree C, Moter: AC 230 V, 50-60 Hz, 150 W HSN: 87168090 | — | — | — | 2,06,500 | |
| — | 17.00 | — | — | ||
| Supply and fitment of running pelmet with curtain fitment arrangement through out all windows of coach (LH & RH Side) , 1 Set=40 Nos. | — | — | — | 25,62,627.6 | |
| — | 6800.00 | — | — | ||
| Supply of SS Panel; Spec: Material: AISI: 304, Thickness: 0.8 | — | — | — | 61,38,360 | |
| — | 6800.00 | — | — | ||
| Apply of SS Panel ; Spec: Material: AISI: 304, Thickness: 0.8 | — | — | — | 10,83,240 | |
| — | 2040.00 | — | — | ||
| Supply of SS Corner Angles; Spec: Material: AISI: 304, 2 inch x 2 inch x 0.8 mm (Here per unit foot will be treated as running foot) | — | — | — | 9,50,844 | |
| — | 2040.00 | — | — | ||
| Apply of SS Corner Angles Spec: Material: AISI: 304, 2 inch x 2 inch x 0.8 mm (Here per unit foot will be treated as running foot). | — | — | — | 3,24,972 | |
| — | 102.00 | — | — | ||
| Supply of Dinner Set (40 items) CLAY CRAFT. | — | — | — | 21,51,435 | |
| — | 102.00 | — | — | ||
| Supply of Tea Set CLAY CRAFT. | — | — | — | 6,86,052 | |
| — | 102.00 | — | — | ||
| Supply of Dinning spoon Set (4 Type Spoon 06 Nos. each per Set) | — | — | — | 3,91,170 | |
| — | 34.00 | — | — | ||
| Supply of Pressure Cooker 5 Ltr (Induction Based) HAWKINS FUTURA | — | — | — | 1,93,579 | |
| — | 34.00 | — | — | ||
| Supply of Fry Pan Non Stick(Induction Based) PRESTIGE | — | — | — | 71,814.8 | |
| — | 34.00 | — | — | ||
| Supply of Non stick Tawa (Induction Based) with Chimta PRESTIGE | — | — | — | 67,201 | |
| — | 34.00 | — | — | ||
| Supply of Non stick Kadai (Induction Based) PRESTIGE. | — | — | — | 96,689.2 | |
| — | 34.00 | — | — | ||
| Supply of S S Kettle (Induction Based )2.5 Ltr | — | — | — | 72,216 | |
| — | 34.00 | — | — | ||
| Supply of S S Saucepan (Induction Based) | — | — | — | 58,174 | |
| — | 34.00 | — | — | ||
| Supply of Dekchi for different size with LID (Induction Based) (06 Nos. Each Set) | — | — | — | 1,88,564 | |
| — | 34.00 | — | — | ||
| Supply of SS Five Bati Tiffin Box (12 Inch) | — | — | — | 48,144 | |
| — | 51.00 | — | — | ||
| Supply of Induction Cook top 2100 Watt, Bajaj | — | — | — | 3,09,927 | |
| — | 544.00 | — | — | ||
| Supply of Bed Sheet (Single) with pillow sleeve, BOMBAY DYEING | — | — | — | 11,72,864 | |
| — | 408.00 | — | — | ||
| Supply of Hand Towel, 16 Inch x 24 Inch, PORTICO | — | — | — | 2,68,872 | |
| — | 272.00 | — | — | ||
| Supply of Bath Towel, 30 Inch x 60 Inch, PORTICO | — | — | — | 4,07,728 | |
| — | 136.00 | — | — | ||
| Supply of Comforter, PORTICO. | — | — | — | 3,12,664 | |
| — | 340.00 | — | — | ||
| Supply of Pillow, KURLON | — | — | — | 8,49,660 | |
| — | 272.00 | — | — | ||
| Supply of Blanket, RAYMOND (Korean Type) | — | — | — | 3,26,128 | |
| — | 272.00 | — | — | ||
| Supply of Blanket Cover (Exclusive) | — | — | — | 2,65,197.28 | |
| — | 17.00 | — | — | ||
| Supply of 3- Seater teak wooden sofa-cum-bed. | — | — | — | 15,74,710 | |
| — | 68.00 | — | — | ||
| Supply of Teak wooden aesthetic view of high back chair with armrest (round shape) with embossed Indian Railways and National Emblem of India on Seating and backrest portion to IS Specification no. 3731-1985. | — | — | — | 14,42,314 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
VerificationofContractualStaff.pdf
ATTACHMENT
GCCApril2022.pdf
ATTACHMENT
AnnexureVIBFinancial.pdf
ATTACHMENT
ConservencyCharges07-09-2021.pdf
ATTACHMENT
policeverificationoftheantecedentsofcontractualstaff.pdf
ATTACHMENT
RBE_20_18.02.2020LabourLaws.pdf
ATTACHMENT
2018_CE-I_CT_9Date04_06_2018LetterofCredit.pdf
ATTACHMENT
LabourDataShramikKalyanPortal17.10.2018.pdf
ATTACHMENT
RBA__48_09052018.pdf
ATTACHMENT
RBA_10_21022018.pdf
ATTACHMENT
TendererCredential.pdf
ATTACHMENT
TechnicalFinancialCriteria_1.pdf
ATTACHMENT
InsuranceSuretyBondDated.09.01.2025inGCC.pdf
ATTACHMENT
2022_12_13RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril2022ACSNo_2.pdf
ATTACHMENT
AdvanceCorrectionSlip1to10toGCCcombined_compressed.pdf
ATTACHMENT
TenderFormGCC2022updated.pdf
ATTACHMENT
ElectricalScopeofWork.pdf
ATTACHMENT
MechanicalScopeofWork.pdf
ATTACHMENT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_111.pdf
ATTACHMENT
checklist.pdf
ATTACHMENT
BIDCAPACITYTenderUpload.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .