Job 1 Construction of Community Centre at Jalgran Tabba, Tehsil and District Una HP Sub Head C.O Basement Portion Ground Floor with Stairs WS and SI Septic Tank and Soak Pit etc.

Amount

Excavation in foundation trenches etcetera in all classification of soil such as pick work,jumper work,pick jumper work,blasting work and hard blasting work in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separately as directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the Engineer in charge including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials .Any loss to the public /private property during the course of execution shall be abssolute respossibility to the contractor which shall have to be duly compensated by him in all cases as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Excavation in drains and channels etcetera in all kinds of earth work such as pick work, jumper work, pick jumper work, blasting work and hard blasting work including dressing of sides and bed and disposing of excavated earth upto any leads disposed earth to be levelled and neatly dressed including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Filling in plinth with sand under floor including watering ramming consolidating and dressing complete for all heights including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etcetera and mass concrete in all height and depth including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in plan in any height upto all floor level including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters buttresses,plinth and string courses and the like upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) size so as to give a fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in:- beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth / heights /thickness upto all floor level including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness in all floor level including carriage of material entire within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and breaks in floors and walls etcetera upto any width /height complete upto all floor level including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter)so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing complete upto floor all level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement: six sand:twelve graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth in all heights / depths including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1 : 5 : 10 ( one cement : five sand : ten graded crushed stone aggregate 40mm(forty millimetre nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth upto all level including carriage of material with in all leads and lifts and other incidental. .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth in all heights / depths including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation/ for all type structure complete of plain cement concrete grade M-10 (M-Ten) in or under water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and technical specification Clause 802.803.1202 and 1203 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rates inclusive octroi royalilty. Malkana toll tax ,sale tax, or other taxes imposed by the Govermment.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in foundation,footing bases of columns and the like and mass concrete in all depth/heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts up to all heights in all floor level complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in Walls (any thickness but not less than 0.10 metre (zero point ten meter thickness) including attached pilasters buttersses,plinth and string courses etcetera from top of foundation in all height/depth in all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in suspended floors, roofs, landing and shelves and their supports balconies beams,girders, bressumers and cantilevers upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in stair cases(except spiral stair case) excluding landing but including the preparing of the surface and finishing of nosing upto all heights in all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mixed and vibrated mechanically, and curing complete to give a smooth and even surface including centering and shuttering etcetrera but excluding cost of reinforcementIn mouldings as in cornices windows sills etc not exceeding 15 cm (fifteen centimetre) in girth upto all floor level including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mixed and vibrated mechanically, and curing complete to give a smooth and even surface including centering and shuttering etcetrera . but excluding cost of reinforcement in string course coping bed plates, anchor blocks plain window sills and the like Up to all heights in all floor level complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying tor steel(Sail/RINL/Shyam steel Tisco, Jindal panther (JSPL) make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Applying cement slurry on RCCslab or cement concrete work using 2.75kg. of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing and laying damp proof course 38mm (thirty eight millimeter)thick with cement concrete 1:2:4 (One cement:two sand:four graded crushed stone aggregate 12.5mm (twelve point five millimeter )nominal size) and curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100(eighty/hundred) or equivalent using 1.70 kg. (one point seventy kilogramme)per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement water proofing treatment with Dr.FIXIT FAST FLEX or equivalent with two component polymer modified comentitious coating consisting of comentitious powder and a polymer liquid in two coats for Ist coat: clean and saturate surface and then applying a coat of Dr.FIXIT and the same process shall be extended upto 300mm vertically the sceond coat shall be applied in opposite direction after four to six hours of application of firsty coat than sprinkling of sand on top surface of applied Dr.FIXIT then apply Cement mortor 1:4(one cement:four sand) and admixed with 200ml.(two hundred milli- litre)of pid proof LW @ 200 ml(two hundred milli litre). per 50kg.(fifty kilogramme) bag complete as per archt.drg.and direction of engineer including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Random rubble masonry / polygonal rubble masonry (uncoursed / brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 ( one cement:six sand:twelve graded stones aggregate 20 mm (twenty millimetre) nominal size at plinth level in cement mortor 1:6 (one cement :six sand)including carriage of material within all leads and lifts.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6(one cement: six sand ) including curing complete in any depth/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in superstructure above plinth level upto all floor level /height in cement mortar 1:6(one cement: six sand ) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in Cement mortar 1:4(One cement four sand) to foundation and plinth including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in cement mortor 1:4(One cement :four sand) in superstructure in all floor level/height curing complete and including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in positionsecond class deodar wood including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing rolling shutters having width below 3.5 metres of approved make made of 80mmx1.25mm MS laths interlocked together at the end by end locks mounted on specially designed pipe shaft with brackets side guides and arrangement for inside and outside locking with push pull opartion complete but excuding the cost of the top cover and spring including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 27.5 centimetres long wire spring grade No.2 for rolling shutters including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing top cover for rolling shutters having width below 3.5 metres including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing ball bearing for rolling shutters including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing M.S. grills (San Harvic, steel man industries, PD industries, Metal window ,Chandni industries, Ganpati Udyog (Raipura) make of required pattern in wooden /steel/ frames of windows etcetera fix glazed which shall be with M.S. flats 20x5mm and 8x8mm square or round bars with round headed bolts and nuts or by screws plain grill including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 40mm thick (forty millimetre ) second class deodar wood frame fly wire mesh shutters using galvanized MS wire mesh of I.S.gauge designation 85G(eighty five )with wire of dia 0.56mm(zero point five six millimetre)for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screws including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 40 mm(forty millimetre ) thick 2nd class deodar wood including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 12mm(twelve millimetre) thick prelaminated board both side bwp phenol bounded exterior / interior grade ISI marked No.IS:12822 of approved shade paneled shutters with frame of first class deodar wood for doors including bright finished/ black enameled iron butt hinges with necessary screws 40mm(forty millimetre) thick frame including entire carriage of material within all leads and lifts.The rate inclusive sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. 300×16mm(three hundred into sixteen millimeter)

Providing and fixing anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etcetra complete including carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. 250×16mm(two hundred fifty into sixteen millimeter)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. 250×10mm(two hundred fifty into ten millimetre)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government 150×10mm(one hundred fifty into ten millimetre)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government 125mm(one hundred twenty five millimeter)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government 75mm(seventy five millimetre)

Providing and fixing 100mm(one hundred millimetre) bright finished brass door stopper with rubber cushion screw etcetra to suit shutter thickness complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 10mm(ten millimeter) thick double charged polished anti skid water proof stain and impact resistent heavy duty vetrified tiles Orinet/Kajaria/Nitco /orient /RAK/Somany Johnson and Johnson (600x600x10mm)(six hundred into six hundred into ten millimeter)manufactured of approved shade and colour in flooring treads of steps and landing laid on a bed of 12mm(twelve millimeter) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as required complete upto all floor level/ height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Duro stone vetrified tiles double charge Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnnson/orient (600x600x8mm)(six hundred into six hundred into eight millimetre) in grey/ coloured of approved shade in skirting risers of steps and dado on 12mm(twelve millimetre) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete Up to all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying marble work ( table rubbed and polished) in flooring 20mm(twenty millimetre) thick base in cement mortar 1:3 (one cement : three sand) including jointed with cement mortar 1:2 (one white cement :two marble dust) with an admixure or pigment to match the shade of marble including rubbing and polishing complete 20mm(twenty millimetre) thick Baroda green marble semi round nosing including carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

40 mm(forty millimetre) thick cement concrete flooring 1:2:4 (one cement: two sand : four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size laid in one layer finished with a floating coat of neat cement. including carriage of material with in all leads and lifts and other incidentals. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing on wall faces PVC (D-plast)supreme, AKG, Finolex, Prince Kisan, SFMC make accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 150mm ( one hundred fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast)supreme, AKG, Finolex, Prince Kisan, SFMC make accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 150mm ( one hundred fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast)supreme, AKG, Finolex, Prince Kisan, SFMC make accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain shoe 150mm ( one hundred fifty millimeter) dia dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Steel work(San Harvic, steel man industries, PD industries, Metal windows ,Chandni industries, Ganpati Udyog (Raipura)) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete in all respect In grating, framed guard bars ladders, railing brackets and similar works in all height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

6mm (six millimetre)Cement plaster to ceiling in all floor level in Cement mortar 1:3(One Cement:three Sand) including curing and carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

15mm (fifteen millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level/height including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level/height including arrises, internal rounded angle, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter)in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

20mm (twenty millimetre)cement plaster in two coats backing coat 10mm and finishing coat 10mm thick on fair side of brick/stonemasonty walls for interior plastering in all floor level/height including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(Eighty millimeter) in girth and finished even and smooth in cement mortar 1:4 ( one cement : four sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Applying (JK wall Putty/ Birla white putty )over plaster surface after thoroughly brushing the surface free from mortar dropping dust loose materials and other foreign matter sand papered smooth to give final finish to the surface complete upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Wall painting (two coat) with acrylic emulsion paint of approved brand and manufacture for interior grade an undecorated wall concrete /stone/ plastered wall surface give an even shade including thoroughly brushing the surface to free from mortar droppings and other foreign matte and sand papered smooth applying of putty a required for metling the surface of Nerolac, Berger(Bison Acrylic) Asian paints(Tractor Acrylic) shalimar make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated will surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth surface of ICI(Dulux Gloss) Nerolac, Berger(Luxor High Gloss) Asian Paints(Premium AP colite Gloss) shalimar make complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts. The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. Enamel paint other than white ICI(Dulux Gloss) Nerolac, Berger(Luxor High Gloss) Asian Paints(Premium Apcolite Glass) shalimar

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting readymixed paint brushing primer pink make of ICI, Nerolac, Berger Asian paints, shalimar including carriage of material with in all leads and lifts and other incidentials The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Painting of two coats (excluding priming coat) over new wood and wood based surfaces with enamel paint other than white make of ICI(Dulux Gloss) Nerolac, Berger(Luxor High Gloss) Asian Paints(Premium Apcolite Gloss) shalimar brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping including carriage of material with in all leads and lifts and other incidentials The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete interlocking paver blocks vibro compacted upto M-50 (fifty) grade including border or kerb block grey or coloured over sub base of concrete with 25mm (twenty five millimetre ) thick average thickness of cement mortar 1:4 ( One cement : four sand ) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete. 60mm ( sixty millimetre ) thick inter locking blocks NTC or its equivalent Make including carriage of material within all leads and lifts and other incidentials.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Supplying and filling crushed stone aggregate in soak pit of sizes 12mm(tweleve millimetre) nominal bore including carriage of material within all leads and lifts and other incidentials.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Supplying and filling crushed stone aggregate in soak pit of sizes 25mm(twenty five millimetre) nominal bore including carriage of material within all leads and lifts and other incidentials.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Supplying and filling crushed stone aggregate in soak pit of sizes 90mm(ninety millimetre) nominal bore including carriage of material within all leads and lifts and other incidentials.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) make of B.S.T.Jindal(Hissar) Tata steel tubes Ltd. prakash surya tube fittings and clamps including making good the wall ceiling and floor 15mm(fifteen millimetre) nominal bore ncluding carriage of material within all leads and lifts and other incidentalsThe rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying in trenches galvanised mild steel tubes (medium grade ) make of B.S.T.Jindal(Hissar) Tata steel tubes Ltd. prakash surya tube fittings (Earth work in trenches to be measured and paid for separately( 25mm (twenty five millimtre nominal bore) including carriage of material within all leads and lifts other incidentalsThe rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Making connection of galvanized mild steel distribution branch with galvanized MS main 20mm(twenty millimeter) to 40mm (forty millimeter) nominal bore by providing and fixing tee complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax sale tax,,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC water storage tank of 12701 ISI marked of approved brand and make (Sintex ) with 3 layers equipment ISI make with 40mm (forty milimeter) nominal bore galvanised mild steel scour tube with fitting, 25mm(twenty five milimeter) nominal bore galvanised mild steel over flow tube with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen milimeter) nominal bore ball valve and cover with locking arrangement providing pads of required sizes for inlet and outlet etcetera . complete including hoisting at roof level height ground level 2000 litres (two thousand)net capacity tank complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete75mm(seventy five millimetre) dia dia make of Finolex including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete110mm(One hundred ten millimeter) dia make of Finolex including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete175mm(One hundred seventy five millimeter) dia make of Finolex including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm(three millimetre) thick bolts and nuts ISI marked make of Finolex complete including fixing with approved adhesive etc. complete 75mm(seventy five millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing PVC plain bend ISI marked make of Finolex including fixing with approved adhesive etc. complete 75mm(seventy five millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

b) 110mm(one hundred ten millimetre) dia

Providing and fixing PVC collars ISI marked Finolex make including fixing with approved adhesive etc. Complete , 75mm(seventy five millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

b) 110mm(one hundred ten millimetre) dia

Providing and fixing PVC floor trap Finolex make of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etcetera complete 110mmx75mm(one hundred ten into seventy five millimeter) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet (European type WC pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1cement : 1 sand )( Seat and cover to be measured and paid for separately ) Anglo Indian (Universal closet No.2090 of Cera Parrware , Hindware sanitary ware, Neycer make closet complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm(four hundred thirty into two hundred sixty into three hundred fifty millimeter) and 340x430x265mm(three hundred forty into four hundred thirty into two hundred sixty five millimeter) size respectively with automatic flushing cistern with fittings R.S or CI brackets standard size galvanised steel flus pipe and spreader with brass unions and GI clamps complete including painting of cistern and fittings cutting and making good the walls floors where required one urinal basin with 5 liters automatic flushing cistern make of Parryware, Hindware sanitary , Neycer, Cera complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing plastic seat (solid/Hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers solid type (i)white plastic seat and cover make of commander Diplomat Hindware, Admiral , Cera complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PTMT ZET spray of approved quality and colour with 1.50 meter tube make of Prayag including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing PTMT coloured/white automatic flushing cistern make of Prayag with a pair of PVC/CI/MS bracket complete with fittings including PVC syphonic apparatus mosquito prory lid PVC union and coupling for connection with inlet,outlet and overflow pipes including catcher holes and making good the same (over flow pipe to be measured and paid for separately) 10 litres net capacityincluding carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 550mmx400mm (five hundred fifty into four hundred millimetre) No. 1001of hindware Parrayware sanitary wars , Neycer, Cera in white shade including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing stainless steel kitchen of approved make of AMC, Unik, Diamond, Neelkanth sink 610x510mm(six hundred ten into five hundred ten millimetre) with bowl depth 200mm(two hundred millimetre) with CP waste with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 32mm(thrity two millimetre) dia lead waste pipe for wash basin or sink including brass check nuts including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 100mm(One hundred millimetre) dia sand cast iron make of prefect, Hind or ISI marked S.W.pipe grating for gully floor Nahni trap including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 600mm x 450 mm(six hundred milimetre into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6mm (six milimeter) thick A.C. sheet or plastic sheet and fixed to plastic plugs with CP brass screws and washers make of Atul, Modiguard, Golden Fish complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing CP brass towel rail (heavy duty Make of Kingston, Gem , Parko, Techno,Jal,ESS.Jaguar. Seiko complete with CP brass brackets fixed to wooden plugs with CP brass screws 600mm x 20mm (six hundred milimetre into twenty millimeter) size including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing CP brass toilet paper holder make of Jaguar,Kingston, Gem, Parko, Techno,Jal,ESS.Seiko complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) dia CP brass bib tap(long nose )(Superior heavy duty) ESS Jaguar kingston , Gem, Parko, Techno, Jal, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) dia CP brass bib tap(long body)with capstan head ESS Jaguar kingston , Gem, Parko, Techno, Jal, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) dia CP brass pillar tap with capstan head ESS, Jaguar kingston , Gem, Parko, Techno, Jal, Seiko make including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings in white shade of Cera Parry ware Hindware Sanitary ware Neycer complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC connection with brass union 45cms.(forty five centimeter) Length 15mm nominal bore (fifteen millimeters) Finolex make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre)dia CP angle valve kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make without nuts and pipe (heavy duty including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 15mm(fifteen millimeter) nominal bore brass fullway valve with wheel Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing 25mm(twenty five millimeter) nominal bore brass fullway valve with wheel Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing PTMT concealed stop cock with flange of approved quality Prayag make and colour 15mm(fifteen millimetre) nominal bore including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 15mm(fifteen millimetre) C.P. Mixer of Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko for Kitchen sink with top/Bottom swinging spout including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing vitreous china division plate of Parry ware, Hundware, sanitary ware, Neycer, Cera make for urinal size 600x300mm(six hundred into three hundred millimetres) including carriage of material with in all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Constructing manhole with RCC top slab in 1:2:4 (one cement : two sand : four graded stone aggregate ) 20mm(twenty millimeter) nominal size foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm(forty millimeter) nominal size inside plastering 15mm (fifteen milimeter) thick with cement mortar 1:3 (one cement : three sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement :two sand : four graded stone aggregate 20mm (twenty millimeter)nominal size finished smooth complete including curing and testing. Inside size 800mm x 800 mm and 500 mm (eight hundred millimeter x eight hundred millimeter and five hundred millimeter) deep including C I cover with frame (Light duty single seal pattern I) 455mm x 610 mm (four hundred fifty five milimeter into six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilograms) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 200mm (two hundred millimeter) thick brick walls of masonry using common burnt clay building bricks in cement mortar 1:3(one cement: three sand ) and curing complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 (one cement : two sand : four graded stone aggregate ) 20mm(twenty millimeter) nominal size foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm(forty millimeter) nominal size inside plastering 15mm (fifteen milimeter) thick with cement mortar 1:3 (one cement : three sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement :two sand : four graded stone aggregate 20mm (twenty millimeter)nominal size finished smooth complete including curing and testing Inside size 800mmx800mm and 1000mm ( eight hundred milimeter into eight hundred millimeter into one thousands millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455mmx610mm(four hundred fifty five milimetre into six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 kg ( thirty eight kilograms) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 200mm (two hundred millimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(one cement: three sand ) and curing complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade 'A' complete make of prefect, Hind or ISI marked S.W.pipe with CI grating brick masonry chamber in cement mortar 1:5(one cement:five sand) and water tight C.I. cover with frame of 30mm×300mm (three hundred into three hundred millimetre)size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg square mouth trap 150mm x100mm (one hundred fifty into one hundred millimetre) size P or R type including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Supplying CI cover light duty rectangular 455x610mm(four hundred fifty five into six hundred ten millimetre) without frame for man holes complete weight 23kg(Twenty three kilogramme)(Single seat pattern-1)including carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

kulvinder govt.contractor