REPAIR/ REPLACEMENT TO EARTHING, CEILING FAN, EXHAUST FAN, PADSTAL FAN, AIR CIRCULATING FANS, WALL MOUNTING FANS, DISTRIBUTION BOARDS, WATER HEATER AND MISC ELECT WORKS INCL LEDISATION UNDER GE (EAST) JALANDHAR CANTT

Amount

Taking down carefully ceiling fan of any sweep, any size/make from existing position of any height by disconnecting elect connections and transporting to GE (E) JRC Elect for inspection in presence of JE-in-charge in workshop for repair by opening dismantling blades, opening for inspection, reassembling after repair and replacement of spares and transporting back to store yard including hanging/ fixing and connecting up and testing etc complete all as specified and directed. Note: The repair will be measured under relevant item of schedule

Hanging only/ fixing ceiling fan 1200mm/1400mm sweep after repair & maintenance upto any height upto 5 Mtr complete including making electric connections, testing for full speed complete all as specified and directed

Material and labour for complete Repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at work shop, including dismantling complete the ceiling fan parts i.e. blades, fan rod, canopy, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, blade and greasing/oiling etc assembling, cleaning and testing of ceiling fan as directed. Notes : (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A'/BOQ as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'/BOQ. (iii) Writing of MES Nos and painting of ceiling fan shall be measured & paid separately under relevant item of Sch 'A'/ BOQ. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engineer-in-Charge & Contractor. (v) Cost of minor part i.e. lock pin, PVC connector, screws shall be deemed to included in the cost of quoted rate

Removing of old burnt winding any type, cleaning stator complete for burnt wiring, carbon residue and rewinding of stator winding of any type/any make fan/ any stator design ceiling fan of 1200mm sweep with superior quality super enameled winding copper wire of existing specification, gauge and weight with superior quality insulation for satisfactory functioning in presence of JE-in-Charge complete all as directed

All as per Srl Item No. 4.00 here-in-before but 1400 mm sweep

Supply only Ball bearing (No 6201) with rubber/suitable seels/shield on both side for ceiling Fan complete all as specified and as directed. Make : HCH/NBC/TATA/FAG/SKF

Supply only Ball bearing (No 6202) with rubber/suitable seels/shield on both side for ceiling Fan complete all as specified and as directed Make : HCH/NBC/ TATA/FAG/SKF

Supply only gun metal bush of existing size suitable for 1200/ 1400mm sweep ceiling fan complete all as specified and directed.

Supply only capacitor 2.5 MFD including necessary connection complete all as specified and directed. Make : Usha/ Epcos/ Havells/Bajaj

All as per Srl Item No 9.00 here-in-before but capacity 3.15 MFD

Supply only down rod 15mm bore, 300mm long fixed one end with mild steel U clamp, nut, lockable bolt, rubber reel, lock pin and other end having threaded/ drilled hole end, suitable nut, bolt, split pin and check nut or aluminium clamp duly white painted suitable for all size and makes of ceiling fan complete all as specified and directed.

All as per Srl Item No. 11.00 here-in-before but 450mm long

All as per Srl Item No. 11.00 here-in-before but 600mm long

Supply only blade of 1200mm sweep of ceiling fan complete all as specified and directed.

Supply only blade of 1400mm sweep of ceiling fan complete all as specified and directed.

Material and labour for painting one coat of synthetic enamel paint (white) using spray machine painting on the surface of ceiling fan of 1200/ 1400mm sweep complete after preparation of surface i.e removing of old paint, cleaning, washing of surfaces filling cavities with filler, cleaning dust and dirt all as specified and directed

Supply only U clamp/ brass bracket assy with rubber reel with nuts, suitable size bolt, lock/ split pin, lock washer suitable for ceiling fan clamp complete all as specified and directed.

Supply only top and bottom canopy of plastic with steel screw suitable for rod for fan of 1200/ 1400mm sweep complete all as specified and directed.

Supply only stator assy blank suitable for ceiling fan 1200mm complete all as specified and directed.

Taking down carefully exhaust fan of any sweep, any size/make from any existing mounting height and transporting to GE(E) JRC for repair workshop. dismantling blades, opening for inspection, reassembling after repair and replacement of spares and transporting back to store yard including hanging/ fixing and connecting up with these and testing etc complete all as specified and directed

Fixing up the exhaust fan after repair/ maintenance upto any height upto 4.5 Mtr complete all as directed.

Material and labour for complete repair and maintenance of unserviceable exhaust fan of any sweep at work shop, including dismantling complete the parts i.e. blades, fan cover, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, connecting wire, PVC connector and greasing/oiling etc assembling, cleaning, painting and testing of exhaust fan as directed. Notes : (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A'/ BOQ as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'/BOQ. (iii) Writing of MES Nos and painting of exhaust fan shall be measured & paid separately under relevant item of Sch 'A'/BOQ. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engineer-in-Charge & Contractor. (v) Cost of minor part i.e. Cotter pin, PVC connector, screws shall be deemed to included in the cost of quoted rate

Material and labour for rewinding stator of exhaust fan 450mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and directed

All as per Srl Item No. 23.00 here-in-before but 380mm sweep

All as per Srl Item No. 23.00 here-in-before but 300mm sweep

All as per Srl Item No. 23.00 here-in-before but 230/250mm sweep any type.

Supply only ball bearing of existing exhaust fan suitable for 450mm sweep including necessary greasing complete all as specified and directed. Make : NBC/ SKF/ Norma/FAG

Supply only ball bearing of existing exhaust fan suitable for 200 to 380mm sweep including necessary greasing complete all as specified and directed. Make : NBC/ SKF/ Norma/ FAG

Supply only mounting legs with rubber suitable for any type of exhaust fan complete all as specified and directed

Supply only steel blade suitable for exhaust fan 300mm sweep complete all as specified.

Supply and fixing exhaust fan louvers suitable for 300mm sweep exhaust fan complete with necessary nut, bolt iron work complete

Supply and fixing XPM Jaali at wall opening for exhaust fan of size 300mm/380mm/450mm sweep of suitable size as directed by Engineer-in-Charge.

Supply and fixing in repair 50 Watt energy saving, environment friendly IP65 LED flood light luminaire with high efficacy all as specified and directed by Engineer in charge.

Material and labour for painting one coat of synthetic enamel paint (existing colour) using spray machine painting on the surface of exhaust fan any sweep complete after preparation of surface i.e removing of old paint, cleaning, washing of surfaces filling cavities with filler, cleaning dust and dirt all as specified and directed

Taking down carefully air circulator of any sweep and size and transporting to workshop. Dismantling blades, opening for inspection, reassembling after repair and replacement of spares and transporting back to store yard including hanging/ fixing and connecting up and testing etc complete all as specified and directed

Material and labour for rewinding motor of air circulator industrial type 450mm sweep with super enameled copper wire of existing specification, gauge and weight including insulating material complete all as specified and directed

All as per Srl Item No 36.00 here-in-before but 600mm sweep

Supply only ball bearing of existing number suitable for air circulator 450mm sweep of different makes including necessary greasing complete all as specified and directed. Make : NBC/ SKF/ Norma/ FAG

Supply only ball bearing of existing number suitable for air circulator 600mm sweep of different makes including necessary greasing complete all as specified and directed. Make : NBC/ SKF/ Norma/ FAG

Supply only gun metal bush of existing size suitable for air circulator complete all as specified and directed.

Supply and fixing exhaust fan, PVC body AC single phase, 230V of size 250m sweep with, blades and frame and louvers complete including making/ cutting of hole in wall of any thickness and making good to disturbed surface complete including plastering all as specified & directed.

Supply only flexible wire twisted three core of size 0.5 Sqmm copper conductor cable for making connections between ceiling rose and winding complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including making/ cutting of hole in wall of any thickness and making good to disturbed surface complete incl plastering all as specified and directed.

Supply and fixing in replacement Deco ultra slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 20 W LED batten, minimum lumen efficacy 120 lumen/watt, cool white, 240V 50 Hz complete all as specified and directed

Supply and fixing in repair box type frame suitable for fixing of T8 LED tube light double side connection (suitable of item Ser No 46.00) all as specified and directed.

Supply and fixing in repair 18W LED tube rod polycarbonate T8 with in built driver retrofitting type double side connection with heat sink having high efficacy 100 lumen/ watt complete all as specified and directed. Note : Make of item Ser Nos 45.00 & 46.00 shall be same

Supply and fixing in replacement Deco ultra slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 18 W LED batten, minimum lumen efficacy 120 lumen/watt, cool white, 240V, 50 Hz complete all as specified and directed

Supply and fixing in replacement Deco ultra slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 22 W LED batten, minimum lumen efficacy 120 lumen/watt, cool white, operating voltage 140-270V AC complete all as specified & directed. Note : (a) Item ser No 44.00 to 48.00 shall be used for Ledisation in OTM/Buildings. (b) The Contractor shall have to provide the details of No of total point, existing LED point, light points converted into LED for the record before claim of RAR/payment

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and including GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wire mesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner

Supply and fixing energy saving, 5 star rating ceiling fan BLDC type of 1200mm sweep, 230V complete with all accessories (without remote type) as specified and as directed by Engineer-in-Charge. Make: Havells/USHA/ Khaitan/Orient/Bajaj/ Crompton/ Polycab/ Anchor by Panasonic

Supply and fixing exhaust fan, PVC body AC single phase, 230V of size 200mm sweep with, blades and frame and louvers complete including making/ cutting of hole in wall of any thickness and making good to disturbed surface complete including plastering all as specified & directed.

Supply and fixing energy saving, 5 star rating ceiling fan BLDC type of 1400mm sweep, 230V complete with all accessories (without remote type) as specified and as directed Make: Havells/USHA/ Khaitan/Orient/Bajaj/ Crompton

Material and labour for pressure die cast aluminium housing bulk head light 9 watt complete all as specified and directed

Supply and fixing in repair powder coated sheet metal enclosure indoor type (size width 1000mm, height 750mm,depth 200mm) made out of 2mm thick CRCA sheet having independent compartments suitable for single phase energy meters) and MCB’s provided with front hinged shutters with locking arrangements and clear glass to visualize the meter reading without opening the compartment with sufficient working space in compartment; duly prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of suitable size from bus bar to meter compartment 04 Nos duly crimped with copper thimbles, duly powder coated having one number cable gland for suitable size of LT XLPE/ PVC cable entry at bottom complete all as specified and directed and consisting with the following:- (a) Bus bar for 3 phase 4 wire system of 4 x 100 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front open able shutter - One Set. (b) MCB , four pole, 415 volts, 63 Amps, 10 KA -One No. (c) MCB SPN, 40Amps, 10 KA C-curve-04 Nos. Note:- Existing meters shall be dismantled & re-fixed in panel by contractor and make cable connection properly through LT cable joint with lugs of suitable size rates are deemed to include for the same.

Supply and fixing in repair energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 25 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection, efficacy min 110 Lumen per watt complete with GI pipe of 25mm bore and MS clamp duly painted with two coat paint all as specified and directed.

Supply and fixing in repair distribution board 8 way complete with copper bus bar for neutral & earth bar complete all as specified and directed. Make : Osafe series of HPL/ Ekinox3 of Legrand/ Acti 9 series of Schneider/ Optipro of Indoasian/ Metalica of Havells or equivalent of Hager/ L&T/ Siemens

Supply and fixing in repair MCB SP 6 to 32 Amps, 10 KA, B curve confirming to Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Hager/ L&T/ Siemens complete all as specified and directed

Supply and fixing in repair MCB SPN 32 Amps, 10 KA, B curve confirming to Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Hager/ L&T/ Siemens complete all as specified and directed

Supply and fixing electric water heater vertical type, storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV etc. complete all as specified and directed Make : CROMPTON/ BAJAJ/ RECOLD/ HAVELLS/ MORPHY RICHARDS/ VENUS/ USHA

Supply and fixing electric water heater vertical type, storage type steel body and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV etc. complete all as specified and directed Make : CROMPTON/ BAJAJ/ RECOLD/ HAVELLS/ MORPHY RICHARDS/ VENUS/ USHA

B D BATRA AND SONS

CHOUDHARY AND SONS

AGGARWAL ENGINEERING CO

ARR CONSTRUCTIONS