REPAIR TO ROLLING SHUTTERS, FENCING, HANGER GATE HANGER CLADDING, ROOFING ETC AND PERIODICAL SERVICES AND MISC ALLIED REPAIR WORKS IN CERTAIN BLDG IN TECH AREA AT AF STN SURATGARH

Amount

BOQ (REPAIR TO ROLLING SHUTTERS, FENCING, HANGER , GATE, HANGER CLADDING, ROOFING ETC AND PERIODICAL SERVICES AND MISC ALLIED REPAIR WORKS IN CERTAIN BLDG IN TECH AREA AT AF STN SURATGARH.)

M&L for preparation of old surfaces of walls/ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.

M&L for complete removal of existing treament through mechanical scraper machine for any type of existing surface of walls/ceiling, complete all as specified and directed by Engr-in-Charge.

M&L for 1mm thick birla/JK wall care putty to receive smooth finishes, complete all as specified and directed.

M&L for 3mm thick plaster of paris to receive smooth finishes and applying two coats of interior finish of wall primer, complete all as specified and directed.

M&L for painting of treated surfaces to receive and applying one coat of oil bound distemper on surfaces of walls, complete all as specified and directed.

M&L for painting of treated surfaces to receive and applying one coat of oil bound distemper on surfaces of ceiling, complete all as specified and directed.

M&L for painting of treated surfaces to receive and applying two coats of plastic emulsion paint on surfaces of walls, complete all as specified and directed. Make Asian Royale Luxury Emulsion or Equivelent

M&L for painting and applying one coat of synthetic enamel paint on plastered surfaces including preparation of old decorated surfaces of walls/kerb stone etc, complete all as specified and directed by Engineer in Charge.

M&L for painting steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint of approved tint including preparation of surfaces, complete all as specified and directed.

All as per ser item No 9.00 here-in-before but on wooden surfaces, complete all as specified and directed.

Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc & finished even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rough cast plaster over and including 10mm thick rendering in CM 1:4 as base coat on external surfaces of brick work finished even and fair, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns, complete all as specified and directed.

M&L for preparation of newely plastered ceiling surfaces and applying three coats of white washing, complete all as specified and directed.

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying two coat of white wash on old decorated surfaces, complete all as specified and directed.

All as per srl item No 18.00 here-in-before but as on ceiling, complete all as specified and directed.

M&L for preparation of old surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns over a coat of exterior wall putty, complete all as specified and directed.

M&L for providing laminated wooden panelling as per approved sample 8mm thick, size of panel 1214mm x 142mm with intelocking panels, Hi gloss PU polished surface of french bleed designs with weather shield max and V groove on all four sides including dismantling of existing panelling of any description, complete all as per manufacturers instructions and directed by Engineer-in-charge.

M&L for mallamine polish with scraping and cleaning of Wooden doors / wall panelling to remove existing polish, filling putty or the required hardeners for repairing of any wooden marks, scratches or scars and treated with putty /primer to obtained similar texture and mallamine coating on the surface with approved shade and make on the surface doors to obtain smooth and uniform looking, complete all as specified and directed by Engr -in-Charge.

M&L for aluminium composite panel 4mm thick for wall cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including pan shape in metallic preparation of multi colour of approved shades for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight. material consisting of 3mm thick FR grade mineral core sandwiched between two aluminium sheets (each 0.5mm thick) it also include screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. the fastening brackets of galvanised steel with serrations and serrated washers to arrest the wind load movement, fasteners and anchor bolts. base frame work for ACP cladding is 40mmX40mm hollow MS tube of medium weight fixed with proper clamps fixing with as per item description, complete all as specified and directed by the Engineer-inCharge.

Taking down old unserviceable horizontal/ vertical venetian blinds of any description and in any position, complete all as specified and directed.

S&F new vertical venetian blinds of special collection self adjusting system of louvers size 100mm wide (as approved by GE) with aluminum top rail and PVC bottom, weight attached with 100mm strip complete with chain all as specified and directed by Engineer-in-Charge. Make : Vista / MARVELl/Hunter Douglas.

S&F in replacement of roller blinds of any size and any colour (non-blackout series) with aluminium headrail, with chain operation complete all as specified and directed by Engr--in-Charge. Make:- VISTA/MARVEL/Hunter Douglas

S&F in 50mm wide ailanto, wooden venetian blinds are made of fine-grained base wood available in natural colors, complete all as specified and directed by Engr--in-Charge. Make:- VISTA/MARVEL/Hunter Douglas

Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins /spring clips and provding and fixing new ones, complete all as specified and directed.

S&F for 3mm thick plain sheet glass ordinary quality & glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F in repair stainless steel tubular 25mm dia chromium plated curatin rod with fixing bracket , stops roller etc, complete all as specified and directed.

M&L for 12mm thick suspended gypsum cove and coffered false ceiling 600mm wide (as in ceiling/lining fixed with counter sunk screws on & including GI channels frame work of standard section as per manufacturers instruction , fixed @ 1.2m in one direction and 45cm C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces, the frame work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall, making good disturbed surfaces smoothening the gypsum board, POP lining at joints panning as required complete all as specified and as directed including dismantling and removing of existing false ceiling, complete all as specified and directed.

Dismantling old mild steel/steel rolling shutter of any size and in any position, complete all as specified and directed.

S&F 1mm thick mild steel rolling shutters, with out ball bearing,as specified including top cover,an-choring rod,hasp and staple including one shop coat of primer erected in position as indicated but gear operated type with bevel gear box including shaft and crank handle complete all as specified and directed. Note :- Replace new rolling shutter in place old manual/gear operated rolling shutter) rolling shutter Including all parts as per IS code 6248-1979 1. Crank Handle 2. Plunge Bolts 3. Crank stand 4. Guide Rail 5. Crank driving Wheel 6. Upper Box 7. Lower Box 8. Crank Fitting 9. Slats 10. Slats Cap 11. Bottom Slats 12. Sealing Belts 13. Limit Knob 14. All bearing of any size complete.(measurment of rolling in width including side guide rails and in height from bottom slats (bottom plate) upto bottom of hood cover/below the slats shaft tube)

S&F 1mm thick lath steel rolling shutters of without ball bearing, including top cover, anchoring rod, hasp & staple including one shop coat of primer; erected in position as indicated, push pull or manual type complete all as specified and directed. Note :- Replace new rolling shutter in place old manual/Gear operated rolling shutter Including all parts as per IS code 6248-1979 1. Crank Handle 2. Plunge Bolts 3. Crank stand 4. Guide Rail 5. Crank driving Wheel 6. Upper Box 7. Lower Box 8. Crank Fitting 9. Slats 10. Slats Cap 11. Bottom Slats 12. Sealing Belts 13. Limit Knob 14. All Bearing of any size complete.(Measurment of rolling in width including side guide rails and in height from Bottom slats(bottom plate) upto bottom of hood cover/below the slat shaft tube)

S&F for safety leavers mild steel with 4 leavers for rolling shutters fixing complete all as specified and directed.

Periodical inspection checking various parts, greasing/oiling as required to make the sliding for rolling shutter hand operated/gear/ operated /electrically operated any size and any type.complete all as specified and directed. Note :- The contractor shall have to attend any complaint with regard to steel door/gate, collapsible gate/rolling shutters any type during working hours for the whole contract period to meet any emergency reapirs and this elements should be included in the quoted rates. a recovery @ Rs 500 per day shall be levied upon the contractor if the complaint is not attended within 48 hours.

Taking down of existing manually operated hangar sliding door of size 3.7m x 8.40m and easing, adjusting, greasing of base wheels & top glide wheels, straightening, filling, smoothening, cutting, brazing carrying out, welding to bottom & top rail/wheels/ channel/door frame, fixing MS roller etc, by mechanical means including minor repair/ welding etc. to sliding door leaf of hanger for noiseless smooth operation including replacement of damage parts and refixing the same at same place, complete all as specified and directed. Note :- 1. The work shall be executed through any approved workshop with prior approval of GE, by mechnical means i.e. crane, Tool & Plant etc. 2. All necessary safety measures shall be taken during execution of work. 3. All necessary repairs/minor items such as nut, bolt, washer, T&P, cranes etc shall be provided to ensure smooth closing/opening of the doors without any extra cost to the Govt. 4.Replaced part, wheel etc. shall be measured and paid separately.

Supply only 80mmx80mm dia mild steel solid roller for top hung of shutter as per the existing shape/ design as per sample, complete all as specified and directed.

Supply only mild steel roller size 150mm dia for bottom channel of shutter and fixing with ball bearing for end side of shutter as per the existing shape/design as per sample, complete all as specified and directed.

All as per item No 39 above here-in-before but 140mm dia (for middle side of shutter) as per the existing shape/ design as per sample ,complete all as specified and directed.

S&F for curtain shall be built up of interlocking lath section formed from cold-rolled steel: strips. The thickness off the sheets from which the lath sections have been rolled shall be not less than 0.900 mm for shutters although lath sections width 50mm and 25mm rolling centres may be used each alternate lath section shall be fitted with malleable cast iron or mild steel clips securely riveted at either end, thus locking the lath ‘section at both ends and preventing lateral movement of the individual lath sections. The clips shall be so designed as to fit the contour of the lath sections complete all as specified and directed.

S&F for springs size 24'X5' used in the roller for counter balancing the rolling shutter shall be made either from high tensile spring steel wire or flat spring steel strip complete all as specified and directed.

S&F for springs size 18'X5' used in the roller for counterbalancing the rolling shutter shall be made either from high tensile spring steel wire or flat spring steel strip. complete all as specified and directed.

S&F for springs size 16'X5' used in the roller for counterbalancing the rolling shutter shall be made either from high tensile spring steel wire or flat spring steel strip. complete all as specified and directed.

S&F in repair mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of neck of bolt exc 12mm but not exc 20mm and length of bolts exc. 5 cm but not exc. 15 cm, complete all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any thickness including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed. Notes:- (i) Work shall be executed upto height of 18 metre from ground Level. (ii) Colour of sheets shall be approved by GE.

Demolition of brickwork or stone/boulders masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

All as per item No 49 above here-in-before but except brick, complete all as specified and directed.

M&L for painting of treated surfaces to receive two coats of dry distemper on surfaces of walls and ceiling, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint ordinary tint over a coat of red oxide primer of any description exc 10cm girth, not otherwise described, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description and applying two coats of synthetic enamel ordinary tint of any description exc 10 cm girth, not otherwise described, complete all as specified and directed. Note: Work shall be executed upto height of 18 meter from ground level

M&L for preparation of new steel surfaces of any description and applying two coats of black Japan paint over a coat of red oxide primer of any description exc 10cm girth, not otherwise described, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, not exc 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of approved shade of size 450mm x 300mm x 7 to 8 mm thick laid in dado etc set and jointed in white or coloured cement to match the surfaces (existing) laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (as approved)(square/rectangular) area of each tile exc 0.06 sqm but not exc. 0.11 sqm, in floors etc . Set &jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (as approved) ( squrare/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm ,in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar 1:6 in floors etc, complete all as specified and directed.

M&L for vitrified tiles of premium quality, light shade, 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm, laid in floors with neat cement slurry @ 3.00 kg/sqm over and including 15mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by the Engineer in Charge.

M&L for coloured glazed ceramic tiles of size 300mmx200mmx7mm thick as in vertical surface such as skirting , dado and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.

M&L for vitrified tiles of premium quality, light shade, 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, as in skirting, set and jointed in neat cement slurry, over and including 10mm thick rendering of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by the Engineer in Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

S&F for mild steel plates, plain or chequered, in 5mm thick or over in thickness in available sizes, Fe 410-W (Gde E-250) quality, complete all as specified and directed.

S&F for steel work in tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade st-240, complete all as specified and directed.

M&L designer type gypsum ceiling board / mineral fibre board of size 595mm x 595mm x 7-8 mm thick as in ceiling, fixed with screws on GI grid frame work of size 600mm x 600mm, GI T-section of size 25mm x 25 mm x 1.25mm, GI L-section 25mm x 25mm x 1.25mm, hanging arrangements with roof with GI wire not less than 4mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description complete as per manufactures instructions, complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats with shutter (without taking off shutter from the frame) exc 1.5 sqm but not 4 sqm each, complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each, complete all as specified and directed.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, Windows ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as per architectural drawings and the directions of Engineer-in-charge

S&F for 4.8mm thick sheet glass, ordinary quality and in square exc 0.5 sqm in each pane in any position, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight 61 to 80 kg each cast iron body, complete all as specified and directed.

S&F 8mm thick hollow printed coloured PVC sheet wall lining/panelling including frame work (sample kept in GE office) made of 1mm thick PVC sheet in strips and channels feathered at the edges for fixing of wall lining inclusive of solvent cement and fixing at site , complete all as specified and directed by the Engineer-in-Charge

M&L in repair 50mm thick insulated panel in roofing consisting of 0.50mm thick galvalune sheet high tensile profile on both side with 49mm thick puf panel insulated in between. Puf should be CFC free closed cell and high density (45+2 kg/m3), complete all as specified and directed Note:-Work is to executed at height upto 12M

S&F in repair 0.50mm thick pre-painted galvalume aluminum zinc coated GI based steel sheet is ridges hip valley gullen drip and straight flashing (length and girth as fixed) wih grade of zinc coating 215, Complete all as specified and directed.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

SRI SAI CONSTRUCTION COMPANY (BID ID -3134574)