REPAIRS TO PLINTH PROTECTION, FENCING, COMPOUND WALL, PATH, DRAIN AND

Amount

Demolition of cement concrete in ground floors and pavings n exc 15cm thick above or below ground level complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of brick work/stone masonary built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) of any section embedded in concrete, brick work, masonry etc. including taking out embeded portion and making good disturbed ground complete all as specified and as directed.

Dismantling old fencing wire mesh/chain link fencing, any description complete all as specified and as directed.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and as directed.

Taking down cement plaster on walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Excavation in post holes, in soft / loose soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M&L for plain cement concrete,1:3:6, type C2 (using 40mm graded aggregate) as in surfaces channels and drains complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered/ stopped ends etc complete all as specified and as directed.

M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in coping , cills, plinth courses, string courses, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.

M&L for factory made kerb stones of M-25 grade cement concrete, fixed in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required with and including necessary excavation and earth work, removing surplus soil and dismantling old kerb stones complete all as specified and as directed.

M&L for 45 to 50 mm thick precast RCC (1:2:4) type B-0, (using 12.5mm graded stone aggregate) as in wall panels for compound wall including interlocking arragements with precast RCC columns and adjecent wall panels as per approved design/patterns, set in cement mortar 1:4, (measured solid) including all mouldings but excluding frame (columns) complete all as specified and as directed. (Note: (i) The cost of reinforcement and form work shall deemed to be included in the unit rate quoted. (ii) Columns/ posts shall be measured and paid seperately)

M&L for precast RCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in columns, posts, boundary pillars with and including grooves to locking of precast RCC precast wall panels, set in cement mortar 1:4 complete all as specified and as directed. (Note: The cost of reinforcement and form work shall deemed to be included in the unit rate quoted.

M&L for brick work with fly ash bricks, old size, straight or curved on plan built in ement mortar 1:6 complete all as specified and as directed.

All as per serial item No. 16 above but except bricks complete all as specified and as directed. Note : Old bricks obtained from demolition shall be reused.

S&F mild steel angle/flat iron as in fencing posts/struts for securing barbed/chain link fencing of any description including drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F in repairs, galvanized, 2 strand, steel barbed wire, 2.24 mm dia, barbed with 2 mm dia barbs, at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and as directed.

Supply only mild steel galvanised chain link fencing, made out of GI wire, complete all as specified and directed. Note :- Dia and mesh shall be as decided by GE and weight of chain link fencing shall be decided by BOO ordered by GE.

Fixing only chain link fencing wire mesh, size and any type to any standards, rails, straining bolts including provision of binding wire etc. and fixed complete all as specified & as directed.

S&F mild steel plain round bars 10mm dia and over as in line bars for fixing chain link fencing including cutting to length, bent to shape required, hooking ends complete all as specified and as directed.

S&F mild steel bolt, machine made, 10 mm dia of shank with hexagonal or square head one end and screwed the other or screwed both end, each screwed end to be fitted with, washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in plinth protection etc finished even and smooth without using extra cement including provision of joints of size 10mm wide and 10mm deep and filling with bitumen mastic joint filling at ever 3m length and th corners complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including backing layer of mortar 10 mm thick in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and as directed.

M&L for 60mm thick, factory made precast cement concrete interlocking tiles, roubber moulded with strength M-35 grade as in floor/pavement laid over and including 25 mm thick crush sand cushioning laid dry to the profile complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work /concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work /concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over a coat of primer all as specified and as directed.

M&L for preparation of old deorated surfaces of wall and applying two coats of cement base paint all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M/S CHHTRAPATI CONSTRUCTION

M/S. Z.K.ENTERPRISES, AHMEDNAGAR

MS. G.A. CONSTRUCTION

Arihant Construction

G. K. Engineering And Fabricators

M/s Mauli Construction

Vinod Enterprises

OM SAI ASSOCIATES

M.H Construction

M/S. V.M. SANGALE