Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹39.0 L
EMD Value
₹78,500
Closing Date
1 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GM/TZ-III,JSR
132/33 kV. Grid Campus Gamharia, P.O- Gamharia, Distt- Seraikella-Kharsawan, Pin- 832108
Repairing and renovation of running old Transformer accessories godown no. 9 and 10 along with fabrication and replacement of lighting arrangements with associate work for storage of running old Transformer accessories at TC, Store, JSR
2026_JSEB_120952_1
663/PR/JUSNL/2026-27
Open Tender
Electrical Works
Works
90 days
TC, Store, Jamshedpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,900
₹78,500
Yes
10 Nov 2026
10 Nov 2026
2 Dec 2026
10 Nov 2026
1 Dec 2026
10 Nov 2026
GCI sheet 0.8 mm thick for shed in top side and provision for extra storage shed 6 mtr.
Wiring from lighting panel to switch boards, from switchboard to junction boxes for light points with 2.5/4.0/6.0 mm2 copper wire as per technical specification, complete in all respect. 1.5 mm 2 copper wire (green) will be used for earthing inside conduits (and supply, installation of complete set of electrical items, appliances, lighting items etc. in each and every room of office as per requirements & as per direction of E/I.)
S.I.T.C of 50/60W LED flood lighting luminaries with pressure die cast housing and toughened glass cover ,IP-66 protection in existing pole /pipe for supply voltage 90~270 V AC 50 Hz Luminaries shall be confirm to IS: 10322 part-5/ section 5 and shall be complete with all necessary accessories as required Make- CGL / BAJAJ / SYSKA / PHILIPS (for indoor godam)
S.I.T.C of 150/160 W LED flood lighting luminaries with pressure die cast housing and toughened glass cover ,IP-66 protection in existing pole /pipe for supply voltage 90~270 V AC 50 Hz Luminaries shall be confirm to IS: 10322 part -5 / section 5 and shall be complete with all necessary accessories as required Make-CGL/BAJAJ/ SYSKA/PHILIPS(for outdoor surrounding of godam)
Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scaffolding, washing of floor and taxes all complete as per building specification and direction of E/I
Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding ect all as per direction of E/I
Laying of one number PVC insulated and PVC sheathed /XLPE power cable 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as per direction of E/I.
Fabrication erecting, hosting in position structural steel Angle, Flat, Plate with applying a priming coat of red lead paint all complete as per direction of engineer in charge.
Supply, Installation, testing & commissioning of Chemical earthing
Lighting distribution board (ACDB panel) [Having 4 pole bus bar, 100A, 3 pole MCCB, HRC fuse holder, power contractor, MCBs, Terminal connectors etc.]
Fabrication Of Different Size Of Racks From Different Size Of Angle, Flat, Plate With Applying A Priming Coat Of Red Lead Paint All Complete For Proper Stacking Of Transformer Accessories , Parts And Other Materials , As Per Direction Of Engineer In Charge.
Providing P.C.C M 150 in nominal mix of (1:2:4) in foundation and plinth with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening ,shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing taxes and royalty all complete as per direction of E/I.
Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20X10X2 mm at 100mm. centres and braced with M.S flat diagonal 20X3 mm with top and bottom rails of T iron 40X40X6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangement stoppers handle including applying a priming coat of red lead paint carriage hoisting and taxes all complete as per building specification and direction of E/I .
Deployment of unskilled khalasi/Man power for clear the site before and after work- 1. Removing of transformer accessories and equipment’s from shed and stacking the same after work. 2. Dismantling of old and damage GI sheet and clear the site before and after work as per direction of E/I And other miscellaneous work at site as per direction of Engineer in charge
Supply, Installation, Testing & Commissioning of wind driven roof ventilators
Ondura asphalt roof ridge cap black
Rivets for mounting of GCI sheet
Carriage of materials to work site through surface road etc all complete as per building specification and direction of E/I.
A. Cement -5 km
B. Sand -10km
C. Stone chips-10km
Sub-Total
GST @ 18% on Sub-Total
Total (Sub-Total + GST)
L.cess@1% on Total(mailto:L.cess@1%25%20on%20Total塹ᴻ䡿ⲯ嶂藄挧ꮥ)
Grand-Total (Total+L.cess)
Say Rs.
Amount in words:-
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ663.pdf
Tender Documents • 1.06 MB
pricepart663.xls
Additional Documents • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .