Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical R O AT VILL BHADIWA POST AMBA DISTT VARANASI UP 221104 | VARANASI | VARANASI | UTTAR PRADESH | 221104 | Accepted-Technical OK |
| 2 | Accepted-Technical | Accepted-Technical OK |
| 3 | Accepted-Technical 171 AGYARAM COLONY TEELAKHEDI ROAD AGYARAM COLONY VIDISHA MADHYA PRADESH 464001 | VIDISHA | MADHYA PRADESH | 464001 | Accepted-Technical OK |
Tender Value
₹9.9 L
EMD Value
₹99,329
Closing Date
24 Jun 2026, 12:00 pmClosed
eo shikarpur
NPP SHIKARPUR
NAGAR ME MARAMMAT KA KARYE
2026_DOLBU_1158335_9
226 NPP 03.06.2026
Open Tender
Civil Works
Percentage
30 days
nppshikarpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,179
eo npp shikarpur
₹99,329
21 Jul 2026
9 Jun 2026
24 Jun 2026
9 Jun 2026
24 Jun 2026
9 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of granular sub-base by providing …………... and compacting with smooth wheel roller …...complete as per Technical Specificationin clause 401 . | - | Cum | - | - |
| 2 | Cement Concrete with 2 cm gauge brick ballast, fine sand & cement proportion of 1:4:8 complete work as per S.i no. 281 | 1 | Cum | - | - |
| 3 | M-150 class Bricks work of mix 1:4 cementand coarse sand in foundation i/c supply of all materials,labour, T & P etc. | - | Cum | - | - |
| 4 | 12mm thick cement plaster with cement & coarse sand of mix 1:4 complete. | 1 | Sqm | - | - |
| 5 | C.C 1:2:4 with cement, C.sand and stone grit complete asper S.I. No. 279(a). | 1 | Cum | - | - |
| 6 | Construction of un-reinforced, dowl jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine. Technical Specification Clause 1501 S.I No.20.12 b | - | Cum | - | - |
| 7 | Supply and laying 80mm thick cement inter locking tiles with 4cm. Cushin fine sand layer all material, labour and T&P etc. comp. work. | - | Sqm | - | - |
| 8 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete DSR 10.2 | - | Kg | - | - |
| 9 | GST 18% | - | GST | 0.29 | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.33 MB
BOQ_2171003.xls
BOQ • 0.29 MB
NIT.pdf
PDF • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .