ADDN/ALTN AT OPERATION THEATER OF BASE HOSP,PROVISION OF WIRING IN NEW SHED INSIDE SBPO AND SPECIAL REPAIRS TO OFFRS MD. ACCN

Amount

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for column & wall foundation, UG Cable and getting out in soft/loose soil complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm layers in soft/loose soil complete all as specified and directed.

Removing excavated material (Soil) not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.

M&L, hard core of broken stone or boulders, gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for damp proof course to horizontal surfaces 20mm thick in cement mortar (1:2) including necessary form work, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

M&L for 100 mm thick, plain cement concrete type C-2(1:3:6) using 40mm graded stone aggregate as in Path/Pavings, etc including finishing cement concrete surface even and smooth without using extra cement also including making joints and filling with bitumastic (in proportion of bitumen and sand 1:2) complete all as specified and directed.

Taking down of plaster from brick work/concrete work in cement mortar complete all as specified and directed.

M&L for rendering cement plaster 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L, Preparation of new surfaces of any description, over 10 cm in width or girth and applying two coats of plastic emulsion paint over one coat of primer white cement based wall care putty (minimum 1.5mm thick) complete all as specified and directed.

M&L for preparation of new surface of any description and apply two coats of exterior acrylic emulsion paint (1st quality) over a coat of alkali resistant primer over complete all as specified and directed

M&L complete removal of existing treatment surfaces of any description and apply two coats of plastic emulsion paint surfaces of andy description over 10cm girth or width not otherwise described over one coat of primer white cement based wall care putty (minimum 1.5mm thick) complete all as specified and directed

M&L for complete removal of existing treatment of old plastered or unplastered surfaces of walls and applying two coats of exterior acrylic emulsion paint (1st quality) over a coat of alkali resistant primer over complete all as specified and as directed.

S&F in repair non asbestos fibre cement building boards 4mm thick fixed with anodised aluminium snap grid frame work for false ceiling with Hangers 6mm dia GI upto 1200mm length adjusting level fixed to roof slabs/roof frame work etc by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including application of two coats of distempering over a coat of primer complete all as specified

Use and waste of formwork to chajjas weather shades and similar items including edges for rough finished surfaces of concert flat complete all as specified and directed.

M&L, Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L, Mild steel TMT bars, 5mm dia and over and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (nominal mix) as in chajjas complete all as specified and directed

Taking down chowkats or frames (without taking off shutter from the frame) not exceeding 1.5 sqm each complete all as specified & as directed.

M & L for factory made PVC internal door frame of size 100mm x 45 mm with a wall thickness of 5mm, made out of extruded 5mm thick PVC sheet of density 600 Kg/cmb, and by joining 3nos. Heat bend PVC sheet sections. The inside section of size 90x30mm shall be made from plain colour PVC sheet of 5mm th. The inside section will be covered by sticking two sections of size 30x35mm and 70x45mm made from 5mm thick plain PVC sheet. The frame shall be miter cut at two corners and jointed witn 4nos. of 150mm long brackets of 15mm x15mm MS squre tube. The two vertical door frames are to be rainforced with 40mm x20mm MS tube of 19 gauge through out the frame. The door frame shall be fixed to the wall using 8/100mm long MS screws through the frame by using anchor fastners. A minium of 4nos of screws to be provided for each verticla member & minium 2nos. for horizontal member etc complete all as specified & as directed.

M & L 30mm thick factory made moulded PVC door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20mmx40mm for stiles as well as top, bottom and lock rail. M S frame shall have a coa of metal primer of approved make and manufacturer. The inside penal shall consists of 20mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/cynoacrylate adhesive with 5mm thick moulded PVC sheet of density 600Kg/Cbm with 2,4,6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel. 5mm prelam PVC sheet to be pasted using solvent cement/cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (made bysticking 02 Nos. from PVC sheets of 5mm thickness using PVC solvent cement adhesive. Door edge liping to be painted with PVC ink of matching colour of prelam mouded PVC sheet of door. 20mm thick (5mmx4Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 Nos stainless steel but hinges of size 100mmx25mmx2mm & 50mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardswares should be fixed with 25mmx8mm size still screws etc.complete all as specified & as directed.

S&F 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 100mm Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Colour coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium windows/ventilators/partitions any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F colour coated (minimum thickness of powder coating 50 micron) anodised aluminium windows/ventilators/partitions any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to Aluminum frame work complete all as specified and as directe

Supply only 5.5mm thick tinted glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 4mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 4mm thick tinted glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only mild steel 4 levers mortice lock, vertical type, size 100mm complete all as specified and directed

Supply only aluminium door closer hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80Kg and fixed complete all as specified and as directed

Supply only Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F 100mm butt hinges, cast brass with mild steel hinge pin bright polished and fixed tybe B-11 complete all as spcified and directed

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

Dismantling of floor hearth or wall tiling incl cement mortar bedding ( but not backing) and removing debris and rubbish off the premises complete all as specified and directed

M&L for 25mm thick PCC B-0, 1:2:4(12.5mm graded aggregate) as in bed layer complete all as specified and directed

M&L vitrified ceramic tiles dark shade 8 to 10mm thick (square/rectangular) polished light shade area of each tiles not exc 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed

M&L 15mm thick screed bed or bedding layer in CM 1:6 for fixing/laying floor tiles complete all as specified and as directed

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match shade of tiles complete as specified and directed.

M&L coloured glazed ceramic tiles coloured in vertical surfaces 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white and colour cement to match shade of tiles complete all as specified and directed.

M&L 10mm thick screed bed or bedding layer in CM 1:4 for fixing wall tiles as in dado/skirting complete all as specified and as directed

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any morter complete all as specified and as directed

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in floor, steps, jambs, soffits, pillars, window-cills and like in 20mm thick screed bed or bedding layer cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) Slab machine cut, single piece in kitchen platform (projected from the edge of the slab upto the extant as directed by Engg-In-Chage), moulding/rounding the edges of the slab with groves at bottom as drip course including provision of suitable size hole for inserting LPG gas pipe into granite slab and RCC base slab also laid over and including 20mm thick backing layer in cement mortar 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L 18-20mm thick marble tiles machine cut in skirting/dado laid over 15mm thick cement screed in cement mortar 1:4 and jointed with grey cement slurry including cutting and polishing of type complete all as specified and as directed.

S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) pipes, single socketed, in any length, with rubber rings 75mm dia complete all as specified and directed

S&F PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia complete all as specified and directed

S&F 18/19mm block board, grade 2nd quality, interior grade decorative type with decorative face veneer on one face fixed with screw to timber frame work complete all as specified.

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wirin complete all as specified and directed

M&L 15mm tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors including taking down complete all as specified and directed.

M&L 20mm tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors including taking down complete all as specified and directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x160mm including Waste coupling in repair of (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) 40 mm bore dia complete all as specified and directed

S&F stainless steel plate 2 mm thick as in corner of projected columns, fixing with stainless steel screw complete all as specified and directed

S&F Table top wall hang basin with fixing accessories,size :425x345x175mm incl waste coupling Make-JAQUAR CAT No-CNS-WHT-903 or equivalent as approved by GE from list of approved makes.

S&F Bottle trap (with internal partition) 32mm size with 250mm & 190mm low wall connection pipes & wall flange all as specified and as directed Make-JAQUAR CAT No-ALD-769L250x190 or equivalent as approved by GE from list of approved makes.

Dismantling water tanks of capacity exc 500 ltrs and not exc 1000 ltrs complete all as specified and as directed.

S & F 1000 litrs capacity rotational moulded polythylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SS part I including dismantaling and removal from site complete all as specified and directed. .

S&F, Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

M&L for applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer after preparation of new steel surfaces of any description over 10cm girth complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

S&F single piece-WC with PP soft close seat cover , Hinges, Fixing accessories set and accessories set, Cistern fitting, Size:360x640x685mm,S tram-110mm all as specified and as directed Make-JAQUAR CAT No-SLS-WHT-6851S or equivalent as approved by GE from list of approved makes.

S&F 15mm angular stop cock with wall flange all as specified and as directed make -JAQUAR CAT NO-FON-40053 or equivalent as approved by GE from list of approved makes.

S&F Hand shower (health faucet)(ABS Body) with 8mm dia, 1.2 meter long flexible tube & wall hook all as specified and as directed Make-JAQUAR CAT No-ALD-CHR-573 or equivalent as approved by GE from list of approved makes.

S&F in repair sink cock with regular swinging spout (wall mounted model) will wall flange all as specified and as directed Make-JAQUAR CAT No-DRC-37347S or equivalent as approved by GE from list of approved makes.

S&F toilet paper holder all as specified and as directed Make-JAQUAR CAT No-AKP-35751P or equivalent as approved by GE from list of approved makes.

S&F towel rack 600mm long with lower Hangers, stainless stell all as specified and as directed Make -JAQUAR CAT NO AKP-35781PS or equivalent as approved by GE from list of approved makes

S&F corner glass shelf (with bracket) all as specified and as directed Make- JAQUAR CAT No CAN-1173 or equivalent as approved by GE from list of approved makes

S&F Single Lever Sink Mixer with 210mm Extension Body Swinging Spout without popup Waste (Table Mounted) with 600mm Long Braided Hoses all as specified and as directed Make-JAQUAR CAT No-FLR-5009B or equivalent as approved by GE from list of approved makes.

S&F Two Way Bib Cock with Wall Flange Make - JAQUAR CAT No LYR-38041 or equivalent as approved by GE from list of approved makes

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

M&L Gl frame work for seamless ceiling (Size of grid 605 x 605mm) comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to Centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to GI framework with screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 for finished even and fair complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sqm and not 4.00 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed.

Taking down Shutters of any description exc 1.00 sqm and not 2.00 sq. m complete all as specified and as directed.

S&F second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F second class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

M&L preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete as required and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as specified in SSR Part I, Section 8 complete all as specified and as directed.

M&L in repair, 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face, fixed with screws to timber frame-work

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

Demolition of Reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for sweeping clean and washing down with water to remove dust, etc., Brushing neat cement slurry with 3.0kg of cement per sq. metre and providing 40mm thick cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in roof padding/slope correction finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L Providing Precast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) as in cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item

M&L Virified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for fixing/laying floor tiles complete all as specified and as directed.

M&L Virified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed or bedding layer in cement mortar 1:4 for fixing/laying wall tiles complete all as specified and as directed.

S&F mild steel conforming to Fe.290.Gde-E-165 Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

S&F 20mm size of mesh, Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F Wall mixer 3-in-1 system with provision fot both hand shower and over head shower complete with 115mm long bend pipe, connection legs, wall flange (without hand and overhead shower) complete all as specified and as directed Make-JAQUAR CAT No-SOL-6281 or equivalent as approved by GE from list of approved makes.

S&F Hand shower 32mm round shape straight design dual flow (ABS Body and face plate chrome plated) with rubit cleaning system with easy flexible tube in chrome finish 1.5 meter long with nuts complete all as specified and as directed Make-JAQUAR CAT No-HSH-5541 or equivalent as approved by GE from list of approved makes.

S&F Over head shower 120mm round shape single flow (ABS Body chrome with gray face plate) with rubit cleaning system with 100mm long shower arm complete all as specified and as directed Make-JAQUAR CAT No-OHS-1789 or equivalent as approved by GE from list of approved makes.

S&F Sink mixer with swinging spout (table mounted) with 450mm long braided hose complete all as specified and as directed Make-JAQUAR CAT No-CON-309KNM or equivalent as approved by GE from list of approved makes.

S&F Two Way Bib Cock with Wall Flange complete all as specified and as directedMake - JAQUAR CAT No OPR-10041PM or equivalent as approved by GE from list of approved makes

S&F Reflection looking mirror of size 600x450mm fixed to wall with chromium plated brass screws and cup washers all as specified and as sdirected.Make PARRYWARE Cat no C 8611 or equivalent as approved by GE from list of approved makes.

M&L complete removal of existing finishes from old plastered surfaces of walls and applying two coat of oil emulsion distemper over 1.5mm thickness wall care putty to obtained smoothness of plastered surfaces complete all as specified and as directed.

M&L complete removal of existing finishes from old plastered surfaces of celings and applying two coat of oil emulsion distemper over 1.5mm thickness wall care putty to obtained smoothness of plastered surfaces complete all as specified and as directed.

M&L prepration of new plastered surfaces of wall and applying two coat of oil emulsion distemper over 1.5mm thickness wall care putty to obtained smoothness of plastered surfaces complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down carefully unserviceable main swirch and DB's including MCB's of any description and capacity complete all as specified and as directed.

Taking down carefully unserviceable submain wiring of any description and capacity complete all as specified and as directed.

M&L for concealed point wiring with two single core 1.5 Sq.mm size FRLS multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green FRLS colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, fan regulators, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc. complete all as specified & as directed for the following :- Item continued as 122 to 125

One light/fan point controlled by one one way switch

One light point controlled by two 2way switch

One 3 pin socket outlet 5 amps on the same board with other switches

One 3 pin socket outlet, 5 amps, on independent board

M&L for concealed point wiring for one socket out let 15/16 amps point on the independent board with two single core 4 Sq.mm size FRLS multistranded copper conductor PVC insulated cables and one single core 4 Sq.mm size green FRLS colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc.complete all as specified & as directed

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of 20mm dia (Medium Grade) with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete all as specified and as directed. Notes;- (i) 2 Runs of 6Sqmm main cable and 1Run of 6Sqmm earth wire along with 1 Run of PVC conduit with acessories shall be measured as one unit length (ii) Rate is deemed to be inclusive cutting chases and making good the distrubed surfaces of wall etc

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of 20mm dia (Medium Grade) with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete all as specified and as directed. Notes;- (i) 2 Runs of 4Sqmm main cable and 1Run of 4Sqmm earth wire along with 1 Run of PVC conduit with acessories shall be measured as one unit length (ii) Rate is deemed to be inclusive cutting chases and making good the distrubed surfaces of wall etc

S&F 36 Watt LED recessed ceiling light lumanire (or nearest next higher wattage) 2' x 2', aluminum housing with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor ≥ 0.90, operating range 140 to 270 V, 50 Hz complete with all accessories internally prewired and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F 12 Watt LED surface mounted light lumanire (or nearest next higher wattage), aluminum housing, high translucent frosted plastic diffuser with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor ≥ 0.90, operating range 140 to 270 V, 50 Hz complete with all accessories internally prewired and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED luminarie tube light fitting basic all purpose surface/wall mounted 2 feet LED batton with polycarbonate housing & integrated electronic driver, with high efficient LEDs 10 watt, (or next nearer higher watt) with all accessories, suitable for operation on Ac, single phase 220 / 230 Volts, 50 Hz supply, complete with all accessories internally prewired and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED luminarie tube light fitting basic all purpose surface/wall mounted 4 feet LED batton with aluminum housing & integrated electronic driver, with high efficient LEDs 20 watt, (or nearest next higher wattage) with all accessories, suitable for operation on Ac, single phase 220 / 230 Volts, 50 Hz supply, complete with all accessories internally prewired and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F Bulk head luminaire suitable for 10 Watt LED (or nearest next higher wattage) light IP66 grade, luminaire efficiency not less than 120 lumens/watts with and including 10 watt LED (or nearest next higher wattage) lamp and connecting up with and including complete with all accessories internally prewired and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F Modular switch, one way, 6 Amp, 1 Module, 240 volt, ISI marked complete all as specified and as directed.

S&F Modular switch, two way, 6 Amp, 1 Module, 240 volt, ISI marked complete all as specified and as directed.

S & F Modular shuttered socket outlet 5 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.

S & F Modular shuttered socket outlet 6 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked with Modular switch, one way, 16 Amp, 1 Module, 240 volt,with indicator ISI marked complete all as specified and as directed.

S & F Modular shuttered socket outlet 6 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.

S & F Modular shuttered socket outlet 5 Pin, 20 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.

S&F Modular switch, one way, 20 Amp, 1 Module, 240 volt, ISI marked complete all as specified and as directed.

S&F Modular switch, one way, 16 Amp, 1 Module, 240 volt, ISI marked complete all as specified and as directed.

S&F Modular switch with indicator, one way, 10 Amp, 1 Module, 240 volt, ISI marked complete all as specified and as directed.

S&F Modular type fan regulator step type120Watt (05 steps) for energy saving fans, 2 Module, ISI marked complete all as specified and as directed.

S&Fceiling rose, 3 phase/PVC/ polycarbonate, isolated body, three terminals, complete all as specified and as directed.

S&F MCB Double pole, 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.

S&F MCB Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.

S&F MCB Triple pole and Neutral, 63 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.

S&F MCB Single pole and Neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.

S&F Sheet metal enclosure for 8 way VPTN Distribution Boards (DB’s), IP-43 double door, with 400 amps rated bus bar, suitable for hosing MCCB as incommer and MCB's as outgoing including blanking plates as required and flush to wall surface complete all as specified and as directed. Note : Incomming MCCB and Outgoing MCBs measured and paid seperately under relevant item

S&F MCCB, 4 Pole, 125 Amps, 415 volts, 16 KA complete all as specified and as directed.

S&F Sheet metal enclosure for 12 way Distribution Boards (DB’s), IP-43 double door, Single pole & neutral with 200 amps rated bus bar, including blanking plates as required and flush to wall surface complete all as specified and as directed. .

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), IP-43 double door, Single pole & neutral with 200 amps rated bus bar, including blanking plates as required and flush to wall surface complete all as specified and as directed. .

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Single pole & neutral with 200 amps rated bus bar, including blanking plates as required and flush to wall surface complete all as specified and as directed. .

S&F sheet metal encloser Plug and socket for suitable for 20 Amps SPN with and including 20 Amps MCB and flush to wall surface complete all as specified and as directed. .

S&F of exhaust fan metal body 380 mm sweep, 1400 RPM or more, single phase, 240 Volts, AC, 50 Hz and connecting up complete and provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan complete all as specified and as directed.

S&F, IP 65, LED Post top light fitting 25 Watt (or nearest next higher wattage), integrated type, made out of die cast aluminum housing with decorative clear opal acrylic diffuser including SPD of 4.5KV and connecting up with and including copper conductor cable of suitable size complete all as specified and as directed

S&F, IP 66, LED Flood light fitting 30 Watt (or nearest next higher wattage), integrated type, made out of die cast aluminum housing and impact resistannce of IK 07, 4KV inbuilt and 10kv external surge protection and connecting up with and including copper conductor cable of suitable size complete all as specified and as directed

S&F IP 66, 60W LED INVERTER STREET LIGHT with RTC fitting made out of pressure die cast aluminum housing with high efficient LED as lighting source operating voltage 140-270 volts and emergency time 1.5-2 hours during power cuts, impact resistannce of IK 05, and connecting up with and including copper conductor cable of suitable size complete all as specified and as directed

S & F energy saving & environment friendly long life 36 Watt,(or nearest next higher wattage) CT ≥ 5700 K, LED building security light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection & impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, surge suppressor of 5 KV or more & high brightness LEDs, luminaire efficacy > 110 lumens/Watt, power factor ≥ 0.90, operating range 140 to 270 V, 50 Hz complete including 32mm bore GI pipe bracket (Light Grade) of length 1.5 mtrs bent to shape and fixed with 40mm x 5mm MS flat with necessary nuts, bolts, washers etc, painting with two coats of syntheic enamel paint over a coat of primer and connecting up with and including three core twisted flexible copper conductor cable of suitable size all as specified & as directed.

S&F bracket suitable for fixing of security light fitting made out from 40 mm bore GI pipe, medium grade 2 metre in length, made to shape as required, fixed to pole with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc complete including necessary nuts, bolts & washer etc as required and as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified and as directed.

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. NOTE : Punned thickness 18cm shall be considered for payment as per para 19.75 of SSR Part-I.

Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified and directed.

M&L cutting in road/pavements or hardstanding etc fot laying of pipes, UG Cables etc of approxiamate width of 45cm and depth 60cm amd making good the distrubed surfaces with PCC, type D-2, 1:4:8 40mm graded stone aggregate,and removing debries of the site complete all as specified and directed.

M&L steel tubular swaged poles, complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31, 9.0 meter long, inclusive of one primer coat of red oxide zinc chrome primer and two coats of aluminium paint including preparation of surfaces and making strip 150mm wide in alternate layer of black and yellow syntheic enamel paint upto 1.5 metre above Coping, complete all as specified and directed. (The poles shall confirm to IS - 2713 & each component pipe shall be ISI Marked & confirm to IS - 1161) NOTE : Earthwork, cement concrete will be measured and paid seperately under appropiate items

M&L PCC (1:2:4) Type B-1 (using 20mm graded crushed stone aggregate) for coping of poles etc & finishing the surface even & smooth without using extra cement incl necessary formwork complete all as specified & as directed.

M&L cement concrete in foundation, filling mass concrete type-D2, 1:4:8, (using 40mm graded crushed stone aggregate) for pole foundation, filling and mass concrete etc including necessary formwork complete all as specified & as directed.

M&L cement concrete in foundation, filling mass concrete type-C2, 1:3:6, (using 40mm graded crushed stone aggregate) for pole foundation bed concrete etc complete all as specified & as directed.

M&L 50mm dia GI pipe light grade with all running fittings (ISI Marked), laid in trenches, under road or fixing on all/pole/crossing drain/nallah etc. complete all as specified and directed.

M&L thermpolastic cable junction box IP55 with metric knocknouts for cable entry and 4 way terminal of size 155mm x 210mm x 92mm fixed in position with aluminum clamps of size 25mmx 3mm and necssary nuts and bolts complete all as specified and directed.

S&F PVC insulated, sheathed aluminum conductor cable 4Sqmm twin core for connecting junction box with street light fitting runinng through pole complete all as specified and directed.

M&L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

S&F 25 Amps Single Phase motor starter, 240 Volts complete all as specified and directed.

S&F factory made outdoor bus bar chamber of size 600mm x 500mm x 300mm made out of 3.15mm thick MS Sheet, totally enclosed, dust and vermin proof, rain protected canopy roof top, door pasted with rubber gasket, water tight IP 42 protection double leaf shutter in front having proper locking arrangements, and painted with powder coating paint, box shall have 4 legs with angle iron 80mm x 80mm x 5mm fixed on floor with PCC foundation 250mm x 150mm x 150mm in cement concrete 1:2:4 type B1 including 4 Nos. 400mm long, aluminum bus bar of size 320mm Amps rating for phase and neutral, dully fixed on procelain insulators and 01 Nos 63 Amps four pole 16 KA MCCB and necessary connection with suitable size copper wire, lugs etc. complete all as specified and directed.

Material and labour for earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron strip 25x4mm earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth strip protected by and including PCC (1:2:4) type B1 precast RCC cover slab 1:2:4 type B1,reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete

Material and labour for earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth strip protected by and including PCC (1:2:4) type B1 precast RCC cover slab (M-15)reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete

PRITHWI BUILDERS