Construction of Outdoor Stadium at village Karnpura under Bengabad Block

Synthetic Sports flooring For Outdoor Running Track use STEP-BY-STEP CONSTRUCTION PROCEDURE FOR ACRYLIC RUNNING TRACK PREPARATION: 1. Earth Work in Excavation Description: • Task: Excavate running track trenches in ordinary soil 110mm (wide classification of soil item-A) and dispose of the excavated earth. • Process: o Excavation: Use suitable equipment (e.g., backhoe or excavator) to dig trenches according to the design specifications. o Depth and Width: Ensure trenches are excavated to the required depth and width. o Debris Removal: Remove roots of trees, shrubs, and other debris from the trenches. o Earth Disposal: Transport the excavated earth to a designated area up to 5 meters away. o Leveling and Ramming: Level and ram the foundation trenches to create a smooth, stable surface. 2. Construction of Granular Sub-Base Description: • Task: Construct a 50mm granular sub-base using coarse graded material. • Process: o Material: Use coarse graded material @ 1.28 m³/m³. o Spreading: Spread the material in uniform layers with a motor grader on the prepared surface. o Mixing: Mix the material in place using a rotavator at Optimum Moisture Content (OMC). o Compaction: Compact the material with a vibratory roller to achieve the desired density, as per MORT&H specification 401 (5th revision). 3. Wet Mix Macadam (Plant Mix Method) Description: • Task: Provide, lay, spread, and compact graded stone aggregate for wet mix macadam (50mm specification). • Process: o Premixing: Premix the material with water at OMC in a mechanical mix plant. o Transportation: Transport the mixed material by tipper to the site. o Laying: Lay the material in uniform layers with a paver in sub-base/base course on a well-prepared surface. o Compaction: Compact the material with a vibratory roller to achieve the desired density. 4. Providing and Applying Primer Coat Description: • Task: Apply a primer coat with SS1 grade bitumen emulsion on the prepared surface of the granular base. • Process: o Surface Preparation: Clear the road surface. o Spraying: Spray the primer at the rate of 0.70 kg/sqm using mechanical means. 5. Tack Coat on Bituminous Surfaces (2 Times) Description: • Task: Apply tack coat with bitumen emulsion on the prepared bituminous surface. • Process: o Cleaning: Clean the bituminous surface with a mechanical broom. o Application: Apply the tack coat using an emulsion pressure distributor at the rate of 0.20 kg per sqm. 6. Providing and Laying Dense Graded Bituminous Macadam Description: • Task: Provide and lay dense graded bituminous macadam (25mm) using crushed aggregates. • Process: o Material: Use crushed aggregates of specified grading, premixed with bituminous binder @ 4.0% by weight of the total mix and filler. o Transportation: Transport the hot mix to the work site. o Laying: Lay the mix with a hydrostatic paver finisher with sensor control to the required grade, level, and alignment. o Rolling: Roll with smooth wheeled, vibratory, and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 7. Providing and Laying Bituminous Concrete Description: • Task: Provide and lay bituminous concrete (30mm) using crushed aggregates. • Process: o Material: Use crushed aggregates of specified grading, premixed with bituminous binder @ 5.2% by weight of the mix and filler. o Transportation: Transport the hot mix to the work site. o Laying: Lay the mix with a hydrostatic paver finisher with sensor control to the required grade, level, and alignment. o Rolling: Roll with smooth wheeled, vibratory, and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507. 8. Preparation Surface Inspection • Inspect Bitumen Base: Ensure the bitumen track is clean, dry, and free from cracks or other damage. • Repair Base: Repair any cracks, holes, or imperfections in the bitumen surface to create a smooth, even base. Cleaning • Cleaning Surface: Clean the surface thoroughly to remove dust, debris, and Pressure washing is recommended. 9. Primer Application Primer Layer • Primer Application: Apply a suitable primer to the bitumen surface to enhance adhesion of the subsequent layers. Use a brush, roller, or spray equipment as per manufacturer’s instructions. • Curing: Allow the primer to cure as per the specified time. 10. Cushion Layers First Cushion Layer (Dense Cushion) • Material Preparation: Mix the dense cushion material as per manufacturer instructions. • Application: Apply the first layer of dense cushion using a squeegee or trowel. Ensure an even, uniform layer. • Curing: Allow the layer to cure completely before proceeding to the next layer. Second Cushion Layer (Dense Cushion) • Application: Apply the second layer of dense cushion over the first, ensuring uniform thickness and coverage. • Curing: Allow this layer to cure thoroughly. Third Cushion Layer (Fine Cushion) • Material Preparation: Mix the fine cushion material as per manufacturer instructions. • Application: Apply the first layer of fine cushion over the dense cushion layers. Ensure a smooth, even surface. • Curing: Allow the layer to cure completely. Fourth Cushion Layer (Fine Cushion) • Application: Apply the second layer of fine cushion over the first fine cushion layer, ensuring uniformity. • Curing: Allow this layer to cure thoroughly. 11. Acrylic Color Layers First Color Layer • Material Preparation: Mix the acrylic color material as per manufacturer instructions. • Application: Apply the first color layer using a squeegee or roller. Ensure an even, consistent application. • Curing: Allow this layer to cure completely. Second Color Layer • Application: Application: Apply the second color layer over the first. Ensure a uniform color and coverage. • Curing: Allow this layer to cure thoroughly. Third Color Layer • Application: Apply the third color layer over the second. Ensure a smooth, consistentfinish. • Curing: Allow this layer to cure completely. 12. Resurface Layer Resurface Layer • Material Preparation: Mix the resurface material as per manufacturer instructions. • Application: Apply the resurface layer over the cured color layers using a squeegee or roller. Ensure a uniform, smooth surface. • Curing: Allow the resurface layer to cure thoroughly. 13. Line Marking Game Line Marking • Measurement and Layout: Measure and layout the game lines according to the standard dimensions and specifications. • Masking: Use masking tape to define the lines accurately. • Painting: Apply the line marking paint using a brush or roller. Ensure crisp, clear lines. • Drying: Allow the paint to dry completely before removing the masking tape. 14. Final Inspection and Quality Control Inspection • Inspect Surface: Check the entire surface for uniformity, smoothness, and adhesion of all layers. • Quality Control: Ensure all lines and markings are precise and meet the required standards. Safety Check • Safety Inspection: Conduct a safety inspection to ensure there are no hazards or imperfections. 15. Maintenance Plan Regular Maintenance • Cleaning: Regularly clean the track to remove debris and maintain surface quality. • Repairs: Promptly repair any damage to the surface to prevent further deterioration. By following these steps meticulously, you can ensure the successful construction of an 8- layer acrylic running track that meets high standards of quality, performance, and safety.

Add GST @ 18%

Add L.Cess @ 1%

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75 Abrick work in C.M (1:6)in foundation and plinth with approved quality of clean coarse sand of F.SQM to 2.5 including providing 10mm thick morter joints , cost of screening materials , raking of joints to 15mm depth , curing taxes and royality all complete as per building specification and direction of E/l

Providing designation 75 B brick work in C.M (1:6)in superststructure with approved quality of clean coarse sand of F.SQM to 2.5 including providing 10mm thick morter joints , cost of screening materials,scaffolfing, raking out joints to 15mm depth , curing taxes and royality all complete as per building specification and direction of E/l

Providing randam rubble stone masonry in CM (1:4) in foundation and plinth with hammer dressed stone of less than 0.03 CUM in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:6) in foundation and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 112mm thick reinforcement designtion 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty ( but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).

Providing and laying cement concrete in kerbs, steps and the likeat or near ground level excluding the cost of centering, shuttering and finishing .1: 11/2 :3 (Cement : 1 1/2 Coarse sand ( zone -III ) : 3 graded stone aggregate 20 mm nominal ( size )

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete works in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas , Lintel, bands, plain window sills, staircase and spiral stair case above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcemewnt: 1:1.5:3: 3 graded stone aggregate 20mm nominal size.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Centering and shuttering including strutting, propiping etc. and removal of form for Roof slab, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases

Centering and shuttering including strutting, propping etc. and removal of form for Chajjas including edges

Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)

providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

(c) 16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing average 150mm thick dry rammed khoa beaten to112mm.(compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thckness is achieved, curing and carriage of water with all leads,making proper slope and blending the top with cement morter (1:10) all complete as per building specification and direction of E/I

Supplying and laying (properly as per design and drawing) rip-rap with good quality of boulders duly packed including the cost of

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I (Cost of Cico will be paid separately)

Providing and laying 25 mm thick white makrana marble tiles in risers of step skirting and pillars of approved quality over 12 mm thick base of cement mortar (1:3) and jointed with white cement slurry --do --

Providing and laying 25mm thick white makrana marble stone slab flooring of approved quality over 19mm thick base of lime mortar (1:1:1) (Lime putty: surkhi: coarse sand) laid and joined with white cement slurry including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) in WALL with materials ---do --- complete job as per specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm,made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame.The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as permanufacturer’s specification and direction of Engineer- in-Charge.30mm thick factory made solid both side prelaminated panel PVC Chaukhat consisting of frame made out of M.S. tube 19 gauge

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mmwide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed tothe styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30mm thick factory made soiled both side Prelaminated Panel PVC door shutter consisting of frame made out MS tube of 19 guage thickness as per your size .

30 mm thick pre laminated PVC door shutters

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing pressed steel door frames confirmig to IS: 4351 manufactured form commercial mild steel sheet of 1.25 mm thickness including hinges jomb, lock jamb, bead and if required angle threshold of mild

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints withwhite cement and matching pigment etc., complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints withwhite cement and matching pigment etc., complete.

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .Coupler - 110mm

Bend - 110mm

Shoe - 110mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110 mm

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.size of (50x75x6mm)

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.paver block in back

Providing and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete. 150 MM dia R.C.C. pipe 150 mm dia. R.C.C. pipe

Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)

Providing and fixing glazaing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket ….. With float glass panes of 4.0mm thickness

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

Supllying and matarials with lobour for construction inspection chamber of designation class 75b brick deep 600x450 internal diamention having 250mm wall thickness in cement morter(1:6)including 12mm cement plaster (1:4)with punning on inside and cement plaster (1:6)with 600x450mm G.I. cover with frame (weight not less than 36k.g)in foundation and refilling all complete as per specification and direction of E/I.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of 20 mm nominal outer dia

25 mm nominal outer dia

32 mm nominal outer dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge External work 32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT grating of approved quality and colour. Circular type - 100 mm nominal dia 100 mm nominal dia

125 mm nominal dia with 25 mm waste hole

Carriage of materials from source to site work including loading & unloading all complete job as per specification and direction of E/I Cement

Steel

Stone Chips

Bricks

Fly Ash Brick

Stone Metal

Metal

Emulsion

Bituminous

Moorum

ELECTRICAL Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required. Group B

Group C

Supply and Fixing Light Plug Point with Modular Type Accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required.

Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.

WIRE Power Plug Wiring in PVC conduit (2x4 sq. mm):- Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Circuit / Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2x1.5 Sqmm + 1x1.5 sq mm earth wire(For 5/6A Plug Points )

2x2.5 Sqmm + 1x2.5 sq mm earth wire For (Switch board and Bay Light)

2x4.0 sq.mm + 1x4.5 sq.mm earth wire

2x6.0 sq.mm + 1x6.0 sq.mm earth wire

4x10 Sqmm + 2x10 sqmm earth wire (For Normal TPN DB)

S/V PVC/ G.I. boxes :- Supplying and fixing PVC/G.I box of following sizes on surface or in recessed with sutiable size of phenolic laminated sheet cover infront including painting etc as requried. S/V PVC/ G.I. boxes :- 72 mm x 146 mm x 48 mm deep / (4" x 7" )

210 mm x 206 mm x 48 mm deep / (10" x 12" )

S/F Modular type Switch / Socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amps,one way switch (for Existing Switch Board)

5/6 amps, 3 pin socket outlet (for Existing Switch Board)

15/16 amps , 6 pin socket outlet.

S/F Modular type electronic fan regulator:- Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F light plug point with piano type accessories : Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 5 pin , 5/6 amps socket outlet and 5/6 amps piano type switch connection , painting etc, as requried.

S/F lpower plug point with piano type accessories Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 6 pin , 15/16 amps socket outlet and 15/16 amps piano type switch connection , painting etc, as requried.S/F lpower plug point with piano type accessories :-

Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.

S/F Batten holder :- Supplying and fixing battrn / angle holder including connection etc as requried.

ITC celling fan :- Installation, testing and commissioning of celling fan, including wiring the down rods of standerd leanth (upto 30 mm) with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as requried.

ITC Resitance type celling fan with regulator :- Installation, testing and commissioning of resitance type celling fan regulator , in existing switch box including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable. earthing the regulator etc. as requried.

ITC Exhaust fan upto 450 mm. sweep:- Installation of exhaust fan upto 450 mm. sweep in the existing opening, including making the holeto suit the size of the above fan, making good the damage, connection, testing, commissioning etc as required.

S/F rewireable double pole / TP&N switch disconnector:- Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as requried. 32 amps, double pole

Providinging and fixing of following rating and breaking capacity four poles MCCB in the existing Verticle DB complete with connections etc. as required . 100 Amp. 16 KA MCCB 415 Volt

S/F S.P. MCB DB : Supplying and fixing following way single pole nutral , sheet, MCB dstribution board , 240 volts ,on surface/recess, complete with tinned copper busbar,nutralbusbar, earth bar,din bar, detachable gland plate,interconnection, phosphate and powder painted 8way,single door

12 way,single door

4way, Double door

8 Ways (4+24 ways) double door,HORIZONTAL TYPE

S/F 'B'serise, s.p.MCB:- Suppling and fixing 6amps to 32 amps rating , 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of folling poles in the existing MCB DB complete with connections, testing and commissioning et. as requried. 6/32amps, single Pole,"B" serise

S/F 'C' series SP MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. 6/32A Single Pole

6/32 amps, SPN

50/63A TPN MCB

P/F M.V. danger notice plate:- Providing and fixing M.V danger notice plate of 200mm x 150mm, made of mild steel, at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as requried.

Providing and fixing neelgiri /mexocan grass turgf with earth 50mmto 60mmthickness of existing ground prepared wirh propal level and ramming with required tools wooden (dhurmos )and than rolling the surface with light roller make the surface smooth and even ,watering with sprinkler .

COPPER EARTH PLATE ELECTRODE:- Earthing with copper plate 600mmx 600mmx 3mm thick including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or cock and salt) complete etc. as required.

Supplying and laying 6SWG GI wire at .50 meter below ground level for conductor earth electrode n,including solding etc as required.

Providing and fixing 25mmx5mm cpper earth strip in for earth electrode etc. as required.

SUPPLY ITEMS Supplying and fixing recess mounting LED 15/16 watt vertical downlighter complete with all accessories and replaceable electronic driver etc. directly on false ceiling including connections with 1.5 sq.mm FR PVC insulated, copper conductor single core cable and earthing the body etc. as required. (Make:- Philips / Havells/ Wipro/Baja/opulus).

Supplying and fixing recess mounting LED 18/20 watt vertical downlighter complete with all accessories and replaceable electronic driver etc. directly on false ceiling including connections with 1.5 sq.mm FR PVC insulated, copper conductor single core cable and earthing the body etc. as required. (Make:- Philips / Havells/ Wipro/Baja/opulus).

Supply of 1200mm sweep ceiling fans complete without regulator, double ball bearing, motor, blades, down rod, canopies, capacitor, suitable for operation on 230 volts, 50 Hz., 1 phase, AC supply connection with 1.5 sq.mm PVC Copper wire complete as required (BEE Five star rated minimum air delivery of 218 CFM/M , 2 years warranty.Fan shall be approved by engineer incharge/consultant) (COLOUR OF CEILING FANS- WHITE.- ISI.) Make- Havells / Bajaj / USHA

20/22 W LED TUBE LIGHT

15/16 watt LED BULB

Supply of AC 230/250 Volts, 50Hz,300mm sweep Exhaust Fans including providing nuts- bolts, mounting frame and other required accessories etc. (For toilets and kitchen) Make:- Bajaj / Havell/USHA .

WATER SUPPLY Earthwork in excavation(As per I.S. 3114/1965 for laying of different types and sizes of pipe so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.

Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification for soil item-A& B

Supplying and fixing male ended 15 mm dia brass bib cock of approved quality (wt. not less than 350 grms) with extra socket all complete as per specification and direction of E/I.

Providing and fixing brqass/C.I. stop cock of approved quality allcomplete as per specification and direction of E/I. (a) 15mm dia.

Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I. 25mm dia weight not less than 1.5 kg.

32 mm and weight not less than 700 gms.

40 mm and weight not less than 1.0 kg.

50mm dia weight not less than 1.5 kg.

cutting chajja or cornice for laying G.I. pipes---------------- all complete direction of E/I.

Making holes in walls for laying G.I. pipes---------------- all complete direction of E/I. (c) 375mm thick wall

Supplying fitting and fixing the following items complet with all material s as per direction of E/I. 600mm x 450mm size

©(iii) C.P. brass soap dise contineer medium a good quality with screw and hinge etc.

supply materials labour for constraction of 600x600x90mm stop cock chamber of brick masonary.

Supplying fitting and fixing viterous waterland earth ware I.W..C or Tarry Hindustan or any other I.S.S. approved makewith 100mm H.C.I.'P' trap15litress.1. orcopull andlet go flushing ------------- all complete as per direction of E/I. (A) 580mm long width 1.2.5 liters low ©12.5 lit low level P.V.C. cisterns

Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I. With 'P' trap - 12.5 lit low level PVC Cistern

Supplying fitting and fixing vierous white glazed eathan ware Indian Squating size 600mmx350mm urinal plate ----------------------- all complete as per direction of E/I. 600mm x 350mm size (large)

Supplying fitting and fixing viteriouswhite glazed earthan ware wash hand basin ---------------------------------all complete as per direction of E/I.

Making holes in walls for laying H.C.I. pipes and restoring the same after pipe laying as per specification and direction of E/I. (i)125mm thick wall

(ii)250mm thick wall

Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of exacavted earth within initial lead and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I. (for classification of soil items A) = 2 X20.00 X 0.60 X 0.45

Labour for alying, fitting and fixing NP2 R.C.C. spun pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leakproof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complet as per specification and direction of E/I. (a) 150 mm dia pipe

Supplying labours, tools and tackles for testing of laid, R.C.C. spun pipes upto specified lead water all complete as per specification and direction of E/I. (water to be supplied free of cost departmentally). 225mm dia

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Supplying, fitting and fixing bathroom fittings of approved make and as per IS specification all cost complete as per direction of E/I. (all rates have been adopted from the basic rate from SOR + 15% for labour and Contractors profit) ALL JAGUAR FITTING Piller cock (Long Neck)

Glass shelf 22'

Supplying laying fitting and fixing NP2 R.C.C HUME pipes all complete as per direction of E/I. 150mm dia

Polythene water storage tank of ISI mark (eg Sintex /Sinter /himgiri/gangotri etc with cover & locking system

Supply of G.I. pipes of Tata or any other ---------- all complete job as per direction of E/I. (i) 15mm dia

(ii) 20mm dia

(iii) 25mm dia

(iv) 32mm dia

(v) 65mm dia.

Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. (a) From 0.00 M to 50.00 M below G.L.

(b) From 51.0 M upto 150.00 M

Supplying submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP

Supplying Full automatic star selta starter to operate induction motor working on 415v 3phase 50hz with no coil. Over load element , On _OFF push buttom with necessary materials and connection to Supply etc complete starter with original sheel steel encloser as per 3914. F.A.S.D starter upto 5 H.P

3 core PVC insulated PVC sheathed copper conductor flat submersible cable. Supplying , Flat flexible submersible cable with ,copper conductor , PVC insulated and PVC sheathed as IS:7098-- 3 Core 4 Sq mm

Supply fitting and fixing GI pipe 50 mm Dia (TATA or equivalent make) Medium Quaility as per IS:1239 ( part 01 ) 2004

Iron ANGLE 75x75x8 m=8.9kg/m

Construction of granular sub base by providing coarse graded material @ 1.28 CUM / CUM , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause401. As per MOSRT&H specification401 (5th revision) and direction of E/I

Wet Mix Macadam (Plant Mix Method)-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.

Tack Coat on Bituminous surfaces-Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.2 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects.

HORTICULTURE Supplying and stacking of well decayed cow dung manure at site including loading unloading and carriage for 1km lead.

Providing and disply of Raphis Palm plant having ht 75 cm to 90cm distance, full of fresh and healthy leaves well development ,10" E POTS & as per direction of the offocers -in charge.

providing and displying FoxTail plam pant well developed with fresh and helthy foliage leaves of ht 210 to 240 to cm specimen plant in 40 cm cement pot as per direction of the office in charge.

supply and stacking of Bignonia venusta ( golden shower )plants of height 30 cm to 45 cm in 20 cm size of earthen pots / plastic pots &as per direction of the office- in -charge.

Add GST @ 18%

Add L.Cess @ 1%

Please Enable Macros to View BoQ information