Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹15.1 L
EMD Value
₹15,100
Closing Date
24 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Construction of Office Building at CTH Area, HAL Bangalore Including Electrical Works.
7796
TENDER NOTICE/NCP/06/24-25/02
Works
Contract Section Civil-FMD-Bangalore
₹1,180
₹15,100
24 Jul 2024
8 Jun 2024
8 Jun 2024
24 Jul 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Earthwork excavation over areas not exceeding 1.5 m deep in all kinds of soft / hard soil for foundations, footings, column pedestals etc., and getting out including clearing away all grass, vegetation, saplings, shrubs, undergrowth, roots and trees not exceeding 30 cm girth, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, pumping, bailing out of water so as to keep foundations in dry condition at any stage of work and draining water away from the site of work without any extra payment, levelling, ramming the bottom of excavation, stacking useful materials as directed and disposing unwanted materials outside the site area to a distance not exceeding 50 m, with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as per drawings and as directed by the Engineer-in-Charge. Note: The measurement shall be done as per the area of bed concrete / footing. The quoted rate shall be inclusive of any necessary working space.
Earthwork excavation over areas exceeding 1.5 m but not exceeding 3.0 m deep in all kinds of soft / hard soil for foundations, footings, column pedestals etc., and getting out including clearing away all grass, vegetation, saplings, shrubs, undergrowth, roots and trees not exceeding 30 cm girth, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, pumping, bailing out of water so as to keep foundations in dry condition at any stage of work and draining water away from the site of work without any extra payment, levelling, ramming the bottom of excavation, stacking useful materials as directed and disposing unwanted materials outside the site area to a distance not exceeding 50 m, with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as per drawings and as directed by the Engineer-in-Charge. Note: The measurement shall be done as per the area of bed concrete / footing. The quoted rate shall be inclusive of any necessary working space.
Earthwork excavation in trenches for foundations, pipes, cables, drains etc. not exceeding 1.5 m in width and excavation for manholes, shafts, pits, wells and the like not exceeding 10 m² in plan upto 1.5 m deep in all kinds of soft / hard soil and getting out including clearing away all grass, vegetation, saplings, shrubs, undergrowth, roots and trees not exceeding 30 cm girth, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, pumping, bailing out of water so as to keep foundations in dry condition at any stage of work and draining water away from the site of work without any extra payment, levelling, ramming the bottom of excavation, stacking useful materials as directed and disposing unwanted materials outside the site area to a distance not exceeding 50 m, with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as per drawings and as directed by the Engineer-in-Charge. Note: The measurement shall be done as per the area of bed concrete / footing. The quoted rate shall be inclusive of any necessary working space.
Returning / refilling with useful excavated soil, free from salts, organic or other deleterious matter in foundations, trenches, footings etc. (Other than black cotton soil & rock etc.), spreading in layers not exceeding 25 cm thick, watering, breaking / removing clods exceeding 50mm, ramming and consolidation etc., with all labour, tools & tackles, plant & machinery, etc., all complete as directed by the Engineer-in-Charge.
Removing / transporting the surplus excavated earth including debris, vegetation waste etc., to a distance exceeding 500m but not exceeding 1500m including loading, unloading, depositing, spreading, levelling etc., after obtaining due clearance from the Engineer-in-Charge etc., all complete as directed by the Engineer-in-Charge.
Providing anti-termite treatment with bifenthrin emulsifiable concentrate chemical mixture prepared and applied in multiple stages as specified below as per M.E.S. S.S.R. 2010, all complete as directed by the Engineer-in-Charge. However execution shall be as per IS 6313 (Part 2). Note: A performance guarentee bond for 10 years on non judicial stamp paper of Rs. 500/- shall be given by the contractor. 10% of completed value of this item shall be deducted as defect liability deposit and the same shall be returned after successful completion of 10 years from the date of completion of the contract / project as a whole.
For top surface of filled earth at 5 litres of chemical emulsion per m² of surface
For plinth protection and surface area at 5 litres of chemical emulsion per m² of surface area
Along external perimeter of the building using chemical emulsion at 7.5 litres per m² of vertical surface of perimeter of the external wall to a depth of 300 mm including rodding etc.
Supplying, mixing and placing plain cement concrete (1:4:8) of required thickness using 40mm and down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases, floors, pavings and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., all complete as directed by the Engineer-in-Charge.
Supplying, mixing and placing plain cement concrete (1:2:4) with 20mm and down graded aggregates in copings, cills, string courses, hold fasts for doors and the like at all levels including necessary formwork, weathering, rounding or chamfering and throating, mixing, transporting, consolidation, levelling, curing, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., all complete as directed by the Engineer-in-Charge.
Supplying, mixing and placing in position, controlled grade reinforced cement concrete M 20 with 20mm and down graded granite aggregate at all levels for the sub items mentioned below including transporting, consolidation, levelling, curing, scaffolding, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, hacking the surface to secure plastering where required, aligning and placing in position foundation bolts as per drawing etc., all complete as directed by the Engineer-in-Charge. Note: (i) Reinforcement & formwork shall be paid separately. (ii) All RCC works to be carried out by using OPC 43 grade cement. (iii) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete. (iv) RMC shall be from approved manufacturer having minimum cement content as per IS 456 and the same shall be approved by HAL before execution.
For Foundation including Rafts, Footing, Foundatiom Beams, Plinth Beams, Bases for Column, etc.,
For Roof Beams / Lintels
For Chajjas
For Roof Slab
For Columns, Pillars, Brackets, Piers, Posts, Struts, etc.,
Formwork by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note: Formwork material is contractor's own property and shall be removed after completion of work.
For Foundation including Rafts, Footings, Foundation Beams, Plinth Beams, Pedestals, etc.,
For Slabs, Landings, Balconies, Canopies, Shelves, etc.,
For chajjas
For Lintels, Beams, Tie Beams, Cantilevers, Brackets, Bressummers, etc.,
For sides of Pillars, Posts, Struts, Piers, Columns, Brackets, etc.
Brick work with table moulded bricks conforming to IS 1077 sub class ‘A’ having average compressive strength not less than 35 kg/cm² built in cement mortar (1:4) for 230 mm thick walls at all levels including making or leaving holes & chases and making good, raking out joints 10 mm deep, scaffolding, curing etc. with all materials, labour, tools & tackles etc., all complete as directed by the Engineer-in-Charge.
Supplying, fabricating and fixing IInd class hard wood [Sal / Mathi] frame work/chowkats for doors of approved size, design, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, fixed to wall, treated with anti termite treatment by painting with tar or coal tar black paint of approved make to the ends of posts and back of chowkats including rebating for fixing the shutters, cost of all materials, labour, wastage, etc., all complete as directed by Engineer-in-Charge. [Sample shall be approved before ordering]
Supplying, fabricating and fixing in position 40mm thick flush shutter conforming to IS 2202 (Part I), block board solid core type with commercial type on both sides, including provision of internal wood lipping not less than 25 mm, rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats etc., all complete as directed by the Engineer-in-Charge. Note: Fittings / hardware shall be paid separately.
Supplying and fixing the following fittings / hardware of approved make and design to door with all required screws, bolts, nuts, washers, etc., all complete as directed by the Engineer-in-Charge.
Anodized Aluminium Barrel Tower Bolts extruded sections - 300mm long
Anodized Aluminium Barrel Tower Bolts extruded sections - 200mm long
Anodized Aluminium Sliding Tower Bolts with hasp, staple [Bolt type] extruded sections - 200mm long
Cold Rold Mild Steel Heavy weight Butt Hinges - 125mm long
Aluminium Alloy Handles, fabricated type, anodised sections - 125mm long
Door Closure hydraulically regulated, Designation No. 3, universal type with anodized aluminium extruded section body.
Supplying and fixing fiber glass reinforced plastic (FRP) door frames of cross section [90 x 45]mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, etc., all complete as directed by the Engineer-in-Charge.
Supplying and fixing 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of approved make to door frames, made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS 14856, etc., all complete as directed by the Engineer-in-Charge.
Supplying, straightening, fabricating and fixing steel reinforcement of HYSD TMT bars of not less than Fe 500 conforming to IS 1786 for all concrete reinforcment members / works including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: Only authorized laps, chairs etc. shall be considered for measurement.
Supplying, Fabricating and fixing in position MS Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc., (cut to ordinary lengths i.e. within 20mm of the length indicated) including necessary cutting, welding, making holes in the wall, inserting the structural members, painting with one coat of approved zinc chromate primer, preparation, etc., all complete as directed by the Engineer-in-Charge.
Supplying, fabricating and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, etc., all complete as directed by Engineer-in-Charge.
Supplying, fabricating and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, etc., all complete as directed by Engineer-in-Charge.
Providing integral cement based water proofing treatment with an average thickness of 120 mm including preparation of surface as required for treatment of roofs, balconies, terraces etc., consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/m² of cement admixed with water proofing compound conforming to IS 2645 and approved by EIC over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of CM (1:5) admixed with water proofing compound conforming to IS 2645 and approved by EIC over 20 mm thick layer of CM (1:5) admixed with water proofing compound conforming to IS 2645 and approved by EIC to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
Supplying and spreading granular sub base (GSB) with closely graded granite aggregate in mechanical mixtures at OMC and spreading in layers as per design to acheive better compaction and compacting with power rollers / vibromax in sub bases including rolling, watering etc., all complete as directed by Engineer-in-charge. The quoted rate shall include preparation of surface by removing caked mud, brushing etc., finishing, watering, rolling, ramming in inaccessible areas etc., with all necessary materials, labour, tools and tackels, plants, etc., all complete as per specifications and as directed by Engineer-in-charge.
Supplying, mixing, laying 75mm thick plain cement concrete (1:2:4), using 20mm and down graded granite aggregates in Floors, etc., including mixing water proofing compound confirming to IS 2645, consolidation, necessary formwork, curing, materials, labours, tools and tackels, plants etc., all complete as per specifications and as directed by the Engineer-in-Charge. Note: Water Proofing Compound shall be paid seperately
Supplying, mixing, laying 50mm thick plain cement concrete (1:2:4), using 12.50mm and down graded granite aggregates in Sub Bases, Floors, Pavings, etc., including consolidation, necessary formwork, curing, materials, labours, tools and tackels, plants etc., all complete as per specifications and as directed by the Engineer-in-Charge.
Supplying, mixing, laying 100mm thick flagging concrete using cement concrete (1:3:6) with 40mm down graded granite aggregate laid with necessary slope, including curing and finishing with 12mm thick cement mortar (1:3) on top and exposed sides, making grooves at every 1 m interval with necessary formwork etc., all complete as directed by the Engineer-in-Charge.
Supplying and laying kota stone minimum 20mm thick, machine cut, rubbed and polished, for below mentioned sub works, bedded and jointed with grey cement slurry at 3 kg/m² and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of kota stone, over a screed of cement mortar (1:4) 15mm thick including chamfering and cutting 3 Nos of anti-slip grooves wherever necessary, etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing etc.
For ramps and steps including treads & risers and similar works
For Flooring, Landing, Skirting, etc.,
Supplying & fixing Premium Double Chrged Vitrified tiles of approved colour & pattern conforming to IS 15622, minimum 9mm thick (Square / rectangular), area of each tile not less than 0.36 m² in floors & skirting, set & jointed in neat cement slurry at 3 kg/m² and pointed in white or coloured cement to match the colour of tile, over a screed of cement mortar (1:4) 20mm thick including machine cutting, curing etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing etc.
Supplying and laying glazed ceramic tiles of approved colour & pattern conforming to IS 15622, minimum 7mm thick (Square / rectangular), size approximately [300 x 450]mm or any suitable near by size, for vertical surfaces, with matching highlighter and border tiles, set & jointed in neat cement slurry at 3 kg/m² and pointed in white or coloured cement to match the colour of tile, over a screed of cement mortar (1:3) 10mm thick including machine cutting, curing etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing etc.
Supplying & fixing anti-skid ceramic tiles of approved colour & pattern conforming to IS 15622, minimum 7mm thick (Square / rectangular), area of each tile exceeding 0.06 m² but not exceeding 0.11 m², in floors, set & jointed in neat cement slurry at 3 kg/m² and pointed in white or coloured cement to match the colour of tile, over a screed of cement mortar (1:4) 20mm thick including machine cutting, curing etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing etc.
Providing, applying and laying cement mortar (1:6) plastering 15mm thick on brick/concrete surfaces, finished even and smooth with trowel for internal walls etc., with necesary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge.
Providing, applying and laying cement mortar (1:4) plastering 10mm thick on brick/concrete surfaces, finished even and smooth for ceilings, with necesary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge.
Providing, applying and laying 20mm thick water proof cement plaster work in two coats for external areas as directed. First coat 12mm thick in cement mortar (1:6) made rough to recieve top coat, second coat 8mm thick in cement mortar (1:4) mixed with water proofing compound (200ml per 50kg of cement or as per manufacturer's specifications), final surface finished with a floating coat of neat cement after necessary preparation of surface, at all levels with necesary materials, labour, scaffoldings, curing, tools and tackles, plants etc., threading if any as directed, all complete as directed by the Engineer-in-Charge. Note: Water proofing compound shall be paid separately.
Providing, applying and laying cement mortar (1:4) plastering 15mm thick on brick/concrete surfaces mixed with water proofing compound (200ml per 50kg of cement or as per manufacturer's specifications), finished even and smooth for drains, sumps, etc, with necesary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge. Note: Water proofing compound shall be paid separately.
Supplying and fixing galvanized steel hexagonal chicken mesh min. 150mm wide having opening [20 x 20]mm and min. 0.91mm dia at junctions of concrete & brick work or between different material, with necesary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by Engineer-in-charge.
Supplying and mixing integral water proofing compound plasticising liquid integrated water proofer of conplast X-421-IC or any other approved equivalent water proofer conforming to IS 2645:2003, mixed in concrete works and in cement plastering works as per manufacturer's specification, etc., all complete as directed by the Engineer-in-Charge.
Painting newly plastered interior surfaces of walls and ceiling with two coats of low VOC premium plastic emulsion with acrylic base conforming to IS 15489, of approved make, colour, shade, tint & pattern at all levels, over a coat of approved alkali resistant primer including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even by applying one full coat of putty, necessary scaffolding etc., all complete as directed by the Engineer-in-Charge.
Painting newly plastered external surfaces with two coats of low VOC premium weather proof exterior acrylic emulsion paint of approved make, colour, shade, tint & pattern at all levels, over a coat of approved acrylic primer including preparing the surface by removing loose dirt and any organic growth, filling of cracks with white cement putty or Plaster of Paris, necessary scaffolding etc., all complete as directed by the Engineer-in-Charge. Note: The paint shall have anti-algal, anti-fungal, UV resistant & anti-tarnishing qualities with 100% acrylic base and silicon or elastomeric additives.
Painting steel surfaces of any description with two coats of synthetic enamel paint conforming to IS 2932, of approved colour and manufacture over a coat of zinc chromate primer including preparation of surface by wire brushing/sand papering and wiping the surface clean with mineral solvents to remove grease and hard marks etc., applying metal paste for steel surface before painting the first coat etc., all complete as directed by the Engineer-in-Charge. Top coat of desired shade shall be applied after the undercoat has thoroughly dried and rubbed with fine grade of abrasive paper to ensure smooth and even surface, free from brush marks, etc., all complete as directed by the Engineer-in-Charge.
Painting wooden frames with two coats of synthetic enamel paint conforming to IS 2932, of approved colour and manufacture over a coat of approved primer including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth and even surface, applying knifing paste filler putty before painting the first coat, etc., all complete as directed by the Engineer-in-Charge.
Supplying, fixing, testing and commissioning light coloured vitreous china floor mounted EWC of size around (475 x 350 x 390) mm or nearest available size conforming to IS 2556 (Part 2) with ABS health faucet [ABS body] mild steel chromium plated suitable for 15mm dia pipe and of approved make with 1.25m long flexible tube and ABS wall hook including sleek PVC dual flush cistern of around 10 litres capacity conforming to IS 7231, closet fixed to the floor by suitable bolts, cistern fixed on suitable brackets embedded in cement mortar (1:4) or by wooden plug and screws including seat and cover, 'P' or 'S' trap, jointing with cement mortar or putty wherever required, cutting and making good the floors, connecting to sewer line etc. with all necessary fittings and accessories like 15mm dia CP brass angular stop cock, 15mm dia pillar tap, 15mm dia PVC inlet, flush pipe, coupling and lock nut, clamps, washers etc., all complete as directed by the Engineer-in-Charge.
Supplying and fixing light coloured vitreous china flat back urinal of size around (430 x 370 x 340) mm or nearest available size and of approved make, fixed to the wall by using plugs embedded in cement mortar (1:3) including CP brass flush valve with wall flange, jointing with cement mortar or putty wherever required, cutting and making good the walls and floors, connecting to floor trap etc. with all necessary fittings and accessories like flush pipe, CP spreader, 32 mm dia semi-rigid PVC waste pipe, coupling, clamps etc., all complete as directed by the Engineer-in-Charge.
Supplying and fixing light coloured vitreous wash hand basin with pedeatal of size (500 x400)mm or nearest available size and of approved brand and manufacture conforming to IS 2556 (Part IV) with pedestal comprising of 1No. CP brass stop valve15mm dia, CP stop brass cock 15mm dia with kent knob 1No. 32mm dia, 32mm dia bottle trap , PVC pipe of 15mm for waste connection, one No. 15mm dia Bib tap , 1 No -15 mm dia Fancy type Pillar taps, etc., making the wash basin complete in all aspects with necessary bolts , nuts , solvent jointing , threading, etc., all complete and as directed by Engineer-in-Charge.
Supplying and fixing following dia PVC pipes to withstand a pressure of 6KGF/Sq.cms complying with IS 5382 of approved manufacture jointed with chemical solution, rubber ring joints, sealants in walls, trenches and floors including supplying and fixing necessary PVC pipe specials such as bend, shoes PVC clamps, chasing in walls, making bores in walls, pipe cuttingg and wastages, cutting and making good, sealing the gaps with cement mortar and making in water tight, etc., all complete as directed by the Engineer-in-Charge.
75mm dia PVC Pipes
110mm dia PVC Pipes
Supplying, fixing or laying, testing and commissioning the following dia CPVC SDR-11 pipes conforming to IS 15778 of approved make jointed together with solvent on walls/ceiling or in floors including all necessary plain and brass threaded CPVC fittings, clamps, pipe cutting & wastages etc., all complete as directed by the Engineer-in-Charge.
16 mm dia
25 mm dia
32 mm dia
40 mm dia
Supplying, fixing, testing and commissioning 15mm dia chromium plated cast copper alloy screw down type fancy bib taps with crutch or butterfly handle conforming to IS 8931, screwed down and fixed with wall flange etc., all complete as directed by the Engineer-in-Charge.
Supplying, fixing, testing and commissioning PVC (SWR grade) floor trap with 75mm dia outlet of approved make, including connection with PVC soil / waste pipe, necessary 150 mm thick cement concrete (1:2:4) for embedding the trap, providing SS cockroach free floor grating with cup, cutting and making good the floors etc., all complete as directed by the Engineer-in-Charge.
Supplying, fixing, testing and commissioning 25mm dia CPVC brass tank adaptor conforming to IS 15778 of approved make, jointed together with solvent as required with all necessary tools and tackles etc., all complete as directed by the Engineer-in-Charge.
Supplying, jointing, testing and commissioning, approved make GM body 32mm dia gate valves with screwed ends etc. complete all as directed by the Engineer-in-Charge.
Supplying and fixing 1000 litres capacity cylindrical vertical rotational moulded polyethylene water storage tank of approved make conforming to IS 12701 moulded to seamless perfection from FDA approved grade polyethylene including necessary cover, inlet, outlet and scour pipe, float valve etc., all complete as directed by the Engineer-in-Charge.
Constructing, testing and commissioning brick masonry inspection chamber of size [455 x 610]mm (Clear inside dimension) and depth 450mm with sewer bricks having average compressive strength not less than 75 kg/cm² in cement mortar (1:4), C.I. cover with frame (Medium duty) [455 x 610]mm internal dimensions, total weight of cover with frame to be not less than 38 kg (Weight of cover 23kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with CM (1:3), finish smooth with a floating coat of cement on walls and bed concrete, all as per standard design including cost of materials, labour charges, curing, etc., all complete as per specifications and as directed by the Engineer-in-Charge.
Cutting existing water line and jointing with new 40mm or 50mm CPVC line including threading/screwing, alterations/additions if any with necessary specials required etc to connect the new line and complete as directed by the Engineer-in-Charge.
Cutting into existing manholes/drains for connecting new drains, making good to pipe dia upto 100mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 smooth finished, and reforming benching as required etc., all complete as directed by the Engineer-in-Charge.
Demolition of cement concrete of any description, breaking to pieces of any thickness or volume with necessary cutting and welding of reinforcement including stock piling at designated location and disposal of demolished material (Except saleable materials) outside to a distance not exceeding 5km and stacking servicable and unservicable materials seperately etc., all complete as directed by the Engineer-in-Charge.
Light fixtures
Supply and fixing on existing wall/ceiling, testing & commissioning of surface mounting, Batten type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output of 1600 lumens, comprising of LED tube, white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire & LM80 certificate for LED tube shall be produced. Other standard accessories including necessary inter-connections, complete in all respects and as directed by engineer-in-chage. The LED tube & batten shall be of Bajaj BLRB DB 118 /Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.
Supply & fixing on the building/ compound wall/ street pole at a height of 4-6mtr approx. including supply and fixing GI pipe bracket made out of 25mm dia class B GI pipe of 2 Mtrs long bent to shape with necessary fixing hardwares etc., supply, fixing, testing & commissioning of street light LED light fixture of wattage not exceeding 72 watts of Bajaj ZELA P 86L WH PO TG SD or equivalent of HAL approved makes and lumens output not less than 8640 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass with IP65/IP66, luminous efficiency ≥ 120 lm/w at luminaire level, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be >5700K, complete in all respects and as directed by engineer-in-chage. The luminaire shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.9. LM 79 certification for luminare & LM80 certificate for LED shall be produced. Note:The cost of interconnection from suitable weather proof SMC connector box to light fitting using 3core X 1.5sqmm copper flexible cable to be included in the scope of work.
Supply & fixing on existing MS hook 1200mm sweep, Ceiling fans complete with blades, down rods, and accessories, 230V single phase 50Hz AC supply. Minimum air delivery 210cu.m/min with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete, erected in position with necessary flexible copper leads of required colour and with canopy, down rod 300mm length, necessary rubber bushings, clamps nuts,bolts etc., complete in all respects and as directed by Engineer-in-charge.
Supply, installation, testing & commissioning of 250mm dia PVC fresh air fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories including necessary angle frame work for fixing the exhaust fan and making wall panel cutting / opening to fix exhaust fan with louvers, and making good finish around the wall opening both inside & outside etc., complete in all respects and as directed by Engineer-in-charge.
Point Wiring
Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to 6A common socket point controlled by 1 No 6A, 250V gr. flush type modular SP switch including 6A 3 pin universal flush type modular socket complete in all respects.
Wiring to ceiling fan point controlled by 1 No 6A, 250V gr. flush type modular SP switch, 2 module type electronic five stepped speed regulator etc., complete in all respects.
Wiring to 6A, 3 pin universal 250V gr. flush type modular Independent socket outlet point controlled by 1 No. 6A 250V gr. Modular type SP switch. complete in all respects.
Wiring to power point consisting of Gang of sockets 3Nos of 6A, 250V grade, 3pin modular type Universal flush type socket outlet & 2Nos of 6A, 250V grade flush type modular switch of approved colour for control with necessary interconnections complete in all respects.
Wiring to exhaust fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3 pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.
Wiring to flush type 16 A Power socket outlets from the nearest DB in concealed wiring system using suitable size 2mm thick rigid PVC conduit with all conduit accessories such as junction boxes, bends, reducers, clamps, collars, elbows etc., and wiring with 2 runs of 4 Sq.mm for phase and neutral and 1 run of 2.5 sq.mm for earthing FRLS multistranded copper PVC insulated 1100V gr Wire with ISI mark including suitable size modular type MS concealed box with base plate, glossy finish front cover etc., including supply and fixing of universal flush type modular 3 pin 16A, 250V gr. power socket outlet & 16A, 250V gr. flush type modular SP switch with neon indicator including with necessary interconnections, chipping the wall & replastering to smooth finish by using chicken mesh wherever necessary complete in all respects & as directed by Engineer-in-charge.
Distribution Board
8 Way Horizontal type SPN MCB DB
40A, 250V gr. DP,100mA RCCB
6-32A, 250V gr. SP MCB
Supply & laying in the duct /fixing on wall with necessary M.S clamps etc., testing & commissioning of 3Cx6 Sqmm XLPE insulated Aluminium conductor 1100V gr. Armoured U.G cables complete with all necessary consumables as directed and as per technical specification.
Supply and connecting indoor type cable end joints suitable for 3Cx6Sqmm LT cable of 1.1 KV gr., Aluminum conductor PVC/XLPE insulated armoured LT UG cables by employing necessary glands, terminals, bolts & nuts etc., complete in all respects.
Excavation of cable trench in all types of soil, refilling, consolidating of soil after laying the cable including ramming and leveling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge. Note: Removing & shifting the excess digging soil/debris for making cable duct to a place as directed by EIC.as per the Technical specifications enclosed and as directed by the Engineer-in-charge.
Supply and fixing on the wall 8 SWG GI wire complete with necessary interconnections using suitable bolts & nuts to effect proper earth continuity as per standard practice.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN06.pdf
TENDER_DOCUMENT • 2.61 MB
TenderDrawing1.pdf
TENDER_DOCUMENT • 0.03 MB
TenderDrawing4.pdf
TENDER_DOCUMENT • 1.21 MB
140ATB.pdf
TENDER_DOCUMENT • 2.57 MB
140APQ.pdf
TENDER_DOCUMENT • 0.21 MB
TenderDrawing3.pdf
TENDER_DOCUMENT • 0.91 MB
140AChecklist.pdf
TENDER_DOCUMENT • 0.17 MB
140APQF.xlsm
TENDER_DOCUMENT • 0.03 MB
ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
140AUndertaking.pdf
TENDER_DOCUMENT • 0.59 MB
TenderDrawing2.pdf
TENDER_DOCUMENT • 0.05 MB
amd.pdf
TENDER_DOCUMENT • 0.51 MB
140APB.pdf
TENDER_DOCUMENT • 0.42 MB
140APBF.xlsm
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .