MMUPPNA_RIDF_XXVIII_22_23_37

Amount

Clearing and grubbing of road land including uprooting rank vegetation, grass, bushes shrubs, saplings, and tree girth upto 300mm removal of stumps of such trees cut earlier, and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned, up to a lead of 1000 m. including removal of and disposal of top organic soil not exceeding 150mm in thickness as per technical Specification Clause 201. (I) By manual means (A) In area of non thorny jungle.

Cutting of Trees including Cutting of Trunks, Branches and Removal of Stumps Cutting of trees, including cutting of trunks, branches and removal of stumps & roots refilling compaction of backfilling and stacking of serviceable material by roots, refilling, compaction of back filling and stacking of serviceable material by manual means with all lifts as per Technical Specification Clause 201 A.) Lead upto 100 m (vi) Girth above 4500 mm

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 m and lead upto 200 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 a) Manual Means

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (i) Private Land

Dismantling of Flexible Pavements Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202. I) By Manual Means (a) Bituminous Courses

Dismantling Stone Masonry as per Technical Specification Clause 202:Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202 (b) Rubble Stone Masonry in Cement Mortar

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (A) By Manual Means

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.

Semi - Dense Bituminous Concrete: Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. including carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) (Including cost of testing of materials at site and laboratory as directed by the deptt.) 'With hydrated lime/ cement as filler (refer table 500-9 of MoSRT&H specification) for Grading II (10 mm nominal size)

Inter locking concrete Block pavement (A) Interlocking pavement block (i) Providing and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage. a) Including Edge block/ Edge restraints

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I) 5th Kilometre Stone (precast)

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (ii)Ordinary Kilometer Stone (Precast)

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (iii) 200 m stone (precast)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. 600mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. 600mm circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. 800mm x 600mm rectangular

Providing Hump type speed breaker. BM

Providing Hump type speed breaker. SDBC

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications. (80% of the length is considered)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications. Painting on Speed breaker

Metal Beam Crash Barrier, Type - A: "W" Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2m center to center, 1.8 m high, 1.1m below ound/road level, all steel parts and fitments to be galvanized by hot dip process, all fitting to conform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause 810.)

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Utility shifting as per direction of Executive Engineer in consulation with the concerned department

RCC Drain & Cover Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.(I) Without dewatering, (i)upto 3 m depth

Providing concrete for Plain / Reinforcement concrete in open foundation complete as per drawing and technical specification cl 802,803,1202 & 1203 .PCC Grade M-10 (Nominal mix 1:3:6)

Reinforcement. Supplying, fitting and placing TMT bar reinforcement in sub- structure complete as per drawing and technical specification. (ii) TMT -IS 1786 (Fe 500 D) Secondary producer (ISI approved)

RCC Grade-M-20: Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specifications Clauses 802,804,805 ,806, 1202 & 1204 PCC Grade M 20 ( Nominial mix (1:2:4)

Reinforcement. Supplying, fitting and placing TMT bar reinforcement in sub- structure complete as per drawing and technical specification. (ii) TMT -IS 1786 (Fe 500 D) primary producer (ISI approved) as per drawing and technical specification clausex 1002,1005,1010 & 1202

RCC Grade-M-20: Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specifications Clauses 802,804,805 ,806, 1202 & 1204 PCC Grade M 20 ( Nominial mix (1:2:4)

Construction of Culvert : Single Row : Excavation for structures E/W in excavation for structure as pwer drawing and Technical specification clause 305.1 including setting out, construction of shoring and bracing, removal of stamps and deleterious materials and disposal upto a lead of 50.00 mtr. dressing of sides and bottom, back filling in tranches with excavated suitable materials. (I) In ordinary soil, (i) Upto 3.00 m depth (without dewatering). Face wall

Providing concrete for plain/ re-inforced concrete in open foundtions complete as per Drawing and technical Specifications clause 802, 803, 1202 & 1203. (M-10, Nominal Mix 1:3:6)

Laying (First Class) bedding on well compacted sand, moorum as per Clause 1105 (ii)

Stone Masonry work in cement mortar Stone masonry work in cement mortar 1:4 in foundation complete excluding pointing and plastering as per drawing and technical specification, clause 600, 1202 & 1203.I(i) n 1:4 cement mortar

Providing and laying RCC pipe NP-3 for culverts on 1st class bedding for granular materials in single row including fixing collar with cement morter 1:2 but excluding exavation, protection works, back filling, concrete, masonry wworks and Parapets clause 1106, 1000mm dia.

Plastering with cement morter (1:4) 15 mm thick on brick work for substructure as per Technical Specification.

Construction of Culvert : Double Row : Excavation for structures E/W in excavation for structure as pwer drawing and Technical specification clause 305.1 including setting out, construction of shoring and bracing, removal of stamps and deleterious materials and disposal upto a lead of 50.00 mtr. dressing of sides and bottom, back filling in tranches with excavated suitable materials. (I) In ordinary soil, (i) Upto 3.00 m depth (without dewatering). Face wall

Providing concrete for plain/ re-inforced concrete in open foundtions complete as per Drawing and technical Specifications clause 802, 803, 1202 & 1203. (M-10, Nominal Mix 1:3:6)

Stone Masonry work in cement mortar Stone masonry work in cement mortar 1:4 in foundation complete excluding pointing and plastering as per drawing and technical specification, clause 600, 1202 & 1203.I(i) n 1:4 cement mortar

Providing and laying RCC pipe NP-3 for culverts on 1st class bedding for granular materials in single row including fixing collar with cement morter 1:2 but excluding exavation, protection works, back filling, concrete, masonry wworks and Parapets clause 1106, 1000mm dia.

Plastering with cement morter (1:4) 15 mm thick on brick work for substructure as per Technical Specification.

Pabitra Boro